Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹24.2 L+₹1.4 L (6.07%)Rejected-Finance | L2 | Rejected-Finance Being not L1 |
| Sl No | Description | Qty | Unit | s.v and co L1 | JOGRAJ CONSTRUCTION COMPANY L2 |
|---|---|---|---|---|---|
| 1.00 | M&L for complete removal of existing treatment on wall, roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed. | 5,040 | Sqm | 7 ₹35,280 Lowest | 9 ₹45,360 |
| 2.00 | M&L for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of thickness 2 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:-
Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.
Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI.
Step 3) Allow 6-8 hrs time to dry the putty surface.
Note:- For Application refer item no 04 | 2,200 | Sqm | 30 ₹66,000 Lowest | 40 ₹88,000 |
| 3.00 | M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.
Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application). | 2,200 | Sqm | 22 ₹48,400 Lowest | 40 ₹88,000 |
| 4.00 | M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed.
Notes: Applicable for Ser item No 01 to 05
(a) The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE.
(b) Cost of scaffolding upto 10m height of building shall be included in the quoted rates. | 2,840 | Sqm | 70 ₹1,98,800 Lowest | 75 ₹2,13,000 |
| 5.00 | M & L for Preparation of old decorated surfaces of walls and cornics by complete removeal of existing treatment by applying water and scrapping of entire thickness of exsting treatment and applying 3mm wall care putty to achieve smooth finish complete all as specified and directed by Engr-in-charge. | 7,000 | Sqm | 17 ₹1,19,000 Lowest | 20 ₹1,40,000 |
| 6.00 | M & L for applying two coat of Oil bound distemper on walls complete all as specified and directed by Engr-in-charge.
Note:- OBD to be done by Roller | 7,000 | Sqm | 20 ₹1,40,000 | 18 ₹1,26,000 Lowest |
| 7.00 | M & L for applying one coat of Oil bound distemper on walls complete all as specified and directed by Engr-in-charge.
Note:- OBD to be done by Roller | 6,500 | Sqm | 12 ₹78,000 Lowest | 12 ₹78,000 Lowest |
| 8.00 | M & L for Preparation of old decorated surfaces of walls or cornics by complete removeal of existing treatment by applying water and scrapping of entire thickness of exsting treatment with using steel scraper and thereafter applying two coat of exterior emuslion paint/weather proof coat complete all as specified and directed by Engr-in-charge. Note- Exterior emulsion paint to be done by Roller. | 2,840 | Sqm | 70 ₹1,98,800 | 50 ₹1,42,000 Lowest |
| 9.00 | M&L for voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed by Engr-in-charge. | 5 | Sqm | 250 ₹1,250 Lowest | 250 ₹1,250 Lowest |
| 10.00 | M&L at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed by Engr-in-charge. | 10 | RM | 200 ₹2,000 Lowest | 200 ₹2,000 Lowest |
Tender Value
₹38.5 L
EMD Value
₹77,060
Closing Date
5 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Kapurthala
GE Kapurthala
Welcome maintenance of Offrs Md Accn and other certain repairs of B/R and E/M at New and Old Mil Stn at Kapurthala
2025_MES_713020_1
8059/E8
Open Tender
Civil Works
Item Rate
270 days
Area under GE Kapurthala
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Kapurthala
₹77,060
21 Aug 2025
7 Jun 2025
8 Jul 2025
7 Jun 2025
5 Jul 2025
21 Jun 2025
Amount
M&L for complete removal of existing treatment on wall, roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed.
M&L for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of thickness 2 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. Step 3) Allow 6-8 hrs time to dry the putty surface. Note:- For Application refer item no 04
M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application).
M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. Notes: Applicable for Ser item No 01 to 05 (a) The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (b) Cost of scaffolding upto 10m height of building shall be included in the quoted rates.
M & L for Preparation of old decorated surfaces of walls and cornics by complete removeal of existing treatment by applying water and scrapping of entire thickness of exsting treatment and applying 3mm wall care putty to achieve smooth finish complete all as specified and directed by Engr-in-charge.
M & L for applying two coat of Oil bound distemper on walls complete all as specified and directed by Engr-in-charge. Note:- OBD to be done by Roller
M & L for applying one coat of Oil bound distemper on walls complete all as specified and directed by Engr-in-charge. Note:- OBD to be done by Roller
M & L for Preparation of old decorated surfaces of walls or cornics by complete removeal of existing treatment by applying water and scrapping of entire thickness of exsting treatment with using steel scraper and thereafter applying two coat of exterior emuslion paint/weather proof coat complete all as specified and directed by Engr-in-charge. Note- Exterior emulsion paint to be done by Roller.
M&L for voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed by Engr-in-charge.
M&L at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed by Engr-in-charge.
Taking down cement plaster on brick or stone wall etc incl raking out joints, hacking for key scrubbing down with water etc.
M&L for rendering 15mm thick on brick wall or concrete surface in cement mortar(1:4) finished even and smooth without using extra cement complete all as specified.
M&L for rendering 15mm thick on brick wall or concrete surface in cement mortar(1:6) finished even and smooth without using extra cement complete all as specified.
M&L for 5mm thick rendering in cement mortar(1:3) on brick work or concrete surfaces finished even and smooth w/o using extra cement in ceiling etc complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distermper over a coat 3mm thick birla white putty complete all as specified and directed by Engr-in-Charge
M&L for preparation of new plastered surfaces of walls and applying one coat of Birla white putty 2mm Thick to obtain the true line to achieve smooth surface and applying two coats of oil bound distermper complete all as specified and directed by Engr-in-Charge (Note- OBD to be done by Roller).
M&L for preparation of plastered or unplastered surfaces of walls or cornics applying two coat of exterior emuslion paint/weather proof coat complete all as specified and directed by Engr-in-charge. Note- Exterior emulsion paint to be done by Roller.
M&L for preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Eng-In-Charge
M&L for preparation of old steel surfaces of any description over 10cm girth or widhth no otherwise described and applying one coat of synthetic enamel paint
M&L for vitrified ceramic coloured tiles 10 mm thick light shade (square/rectangular) area of each tile exceeding 0.18sqm but n.exc 0.38 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6) complete all as specified and directed by Engr-in-Charge
M&L for granite 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 15 mm thick bedding layer in CM 1:6 complete all as specified and directed by Engr-in-Charge
Taking up or down steel tubing 15mm bore & connection including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-Charge
S&F of 15mm bore GI water tubing medium grade fixed complete to wall or ceiling as specified & directed complete all as specified and directed by Engr-in-Charge
Taking up or down steel tubing 20 mm bore & connection including cleaning for refixing or removal to store as complete all as specified and directed by Engr-in-Charge
S&F of 20 mm bore GI water tubing medium grade fixed complete to wall or ceiling as complete all as specified and directed by Engr-in-Charge
Dismantling floor hearth or wall tilling including cement mortar bedding (but not backaing coat) removing serviceable tiles to store & rubbish off the premises complete all as specified and directed by Engr-in-Charge
Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in CM (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing or etc and making good as specified & directed.
S&F of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as specified & directed.
S&F in repairs 20mm dia aluminium chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified.
S&F in repairs 15 mm bore CP bib taps (long body) fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F in repairs 15mm dia stop/angle valve, CP cast copper alloy with crutch or butterfly handle. Screwed down high pressure, screwed both ends for iron pipe and fixed complete all as directed.
S&F in repairs for vitreous china ware wash hand basin with pedestal type (color as specified and directed), flat back size 550 X 400mm including 15mm dia pillar tap swan neck) chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed.
S&F in repairs brass CP mixture valve Centre hole, cast copper alloy fancy type chromium plated for mixing hot and cold water screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia as per , complete all as specified and directed by Eng-In-Charge.
S&F in repairs vitreous china squatting pan wash down water closet of size 580x440 mm, white, complete fixed in repairs with P or S trap, PVC flushing cistern low level of Make 10 ltrs capacity including brackets for flush tank, PVC flush pipe and all necessary fittings etc all as specified and directed by Eng-In-Charge.
S&F in repairs S&F sinks with drainage board (double bowl) made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm.) All as specified and directed by Eng-In- Charge.
S&F in repairs Brass CP wall mixer with L bend for connection to overhead shower for mixing hot & cold water screwed down for iron pipe and fixed of 15mm bore complete all as specified and directed by Eng-In-Charge.
S&F in repairs 125mm over head shower of chromium plated any colour or fixing with 15mm pipe with 225mm, SS Arm and flange complete all as specified and directed by Eng-In- Charge.
S & F in repairs Chromium plated, Brass, Jet spray including flexible pipe 15mm bore, screwed down, high-pressure pipe of 15 mm bore with wall flange fixed to wash down water closet (pedestal pattern) complete all as directed by Engineer in Charge.
S&F in repairs stainless steel plate rack ( Utensil rack) of size 900mmx1200mm and depth 300mm made with 0.63mm thick stainless sheet fixed with brass screw including necessary fittings complete all as specified & directed by Eng-In-Charge..
S&F in repairs vitreous china European type wash down water closet pan (single piece including built in flushing cistern) colour (as specified and directed) including seat cover (with MS or CP hinging device) and fixing bolts, P or S trap, necessary inlet and outlet connections complete all as specified and directed by Eng-In-Charge.
S&F in repairs Toilet paper holder of CP fixed to walls with chromium plated (CP) brass screws complete all as specified and directed
S&F in repairs towel rack of CP fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Eng-In-Charge.
S&F in repairs health faucet (chromium plated) with 15 mm with 1.00 mtr CP flexible pipe all specified by Engineer in Charge
S&F in repairs corner glass shelf of size 300mm dia 8mm thick with chromium plated bracket complete all as specified by Engineer in Charge
M&L for glazed ceramic coloured tiles in vertical surfaces 450X350X 7mm thick over 10 mm thick rendering in CM (1:4) as in vertical surfaces such as in dado/skirting including set and jointed neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed by Engr-in-Charge
M&L for mild steel pipe 25 mm dia curtain rod with Powder coating fixed in the MS hooks, and finials/side brackets (both side), shade as approved complete all as specified and directed by Eng-In-Charge
Dismantling of cast iron pipes jointed in cement mortar and taking out from trenches/ wall 100 / 75 mm bore (sand cast) incl bends/Y/T all as specified and directed by Engineer - in - Charge .
S & F 75mm PVC(SWR) pipes single socketed in any length with rubber ring joint fixed to walls completed all as specified and directed by Engr-in-charge
S & F 75mm PVC(SWR) bends completed all as specified and directed by Engr-in-charge
S & F 110mm PVC(SWR) pipes single socketed in any length with rubber ring joint fixed to walls completed all as specified and directed by Engr-in-charge
S & F 110mm PVC(SWR) bends with access door completed all as specified and directed by Engr-in-charge
S & F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed
S & F 75mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed
S&F 3.00 mm thick Plain sheet glass, one side sheet glass is groundor obscured or frosted in squares n exc 0.5 sqm each pane and glazing with metal beads all as specified all as specified and directed by Eng-in-Charge
Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.
Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.
M & L for 18-19 mm thick Prelaminated particle board, grade -2 quality interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work for cuboard shutter all as specified and directed by Engineer - in - Charge .
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and drawing complete all as specified and directed
S &F factory made 2nd class hard wood Plain, framed, panelled shutters 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by Engineer-in-charge.
S&F factory made 2nd class, hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge, etc ( without sash bars) edges of framing plain, chambered or rounded, fitted with cut and mitred beads for securing glass , etc but difided into squares with plain chamfered or rounded mirted and rebated sash bars any numbers sizes of members of shutters as specified and directed by Engineer-in -Charge
M & L Vitrified Ceramic tiles 8-9 mm thick (square/ rectangular), dark shade, polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 Sqm, in floors/skirting etc set & jointed in neat cement slurry & pointed in white or coloured cement to match. incl 15mm thick screed bed/bedding layers in cm 1:6 complete all as specified and directed by Engr-in-Charge
S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x 60mm filling hollow frame with PCC (1:3:6) complete all as specified and directed by Engr-in-Charge
S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x 60mm complete including filling of chowhats with PCC (1:2:4) type B-0 using 12.5mm graded aggregate all as specified and directed by Engr-in-Charge
S&F framed work Fe 410-W(Gde-E-250)Quality-A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering.Doors etc. to be prepared for hanging or sliding with and incl hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.
S&F of Factory made Factory made solid panel PVC door shutter30 mm thick (style) consisting of framemade out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heatmoulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm widthstuck inside with solvent cement for stilesand plain colour PVC sheets for top rail,lock rail & bottom rail on either side & asgap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to befitted in the M.S. frame welded / sealed tothe stiles & rails with suitable PVC sheetbeading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge
S & F steel window 1.25mm thick Box type ( primer coated) ERW hollow P-section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:2:4) type B-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf complete all as specified and directed and shown on drawings. Note: (i) Glass shall be measured and paid separately under appropriate item of Sch 'A' (ii) Irrespective of whatever shown on drgs, & measured and paid separately under appropriate item complete all as specified and directed.
S & F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf. Note: wire mesh shall be measured and paid separately under appropriate item complete all as specified and directed.
S & F framed work such as grills, grating, etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work or water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and directed by Engineer - in - Charge.
S&F 4.00 mm thick Plain sheet glass, one side sheet glass is groundor obscured or frosted in squares exc 0.5 sqm each pane and glazing with metal beads all as specified.
S/F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed
S&F 200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed
S&F alumunium hinges for PVC door shutter, size of hinges in 100mm complete all as specified and directed
S/F Aluminium handles, cast type, anodised of size 150 mm complete all as specified and directed
S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed
S/F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed
M & L Preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer all as specified and directed by Engineer-in-Charge.
S & F in repairs for PVC flushing cistern valve less, syphonic action type low level, ball valve, float and handle with bracket fixed in repair of 10 ltrs capacity all as specified and directed.
S&F in repair 500 litres capacity Rotational moulded polyethylene water storage tanks triple layered (Cylindrical vertical with closed top) hoisted and fixed in position including complete all as specified in SSR Part I including dismantaling of existing tank and removing to store complete all as specified and directed
S & F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in repair all as specified and directed by Engineer - in – Charge.
S & F in repairs Brass chromium plated bottle traps of 32 mm dia for wash basins with inlet and outlet screwd fro pipe or connectins including necessary packing, union and cap and fixed all as specified and directed by Eng-In-Charge.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.
S & F 6mm thick cover fillet for 18/19mm wide block board of 2nd class hardwork complete all as specified and directed.
JOGRAJ CONSTRUCTION COMPANY (BID ID -3345576)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .