ETP:175 KL/ Hr- Raipur Project

ETP-Design & Supply 175 KL/Hr — FABRICATION, SUPPLY AND INSTALLATION OF ETP, 70 KL/HR DESIGN, FABRICATION, SUPPLY, INSTALLATION AND COMMISSIONING OF ETP, 70KL/HR CAPACITY, EFFLUENT TREATMENT PLANT FOR NEW POL DEPOT AT HISSAR, DESIGN, ENGINEERING, FABRICATION/MANUFACTURE, PAINTING, SUPPLY, UNLOADING, STORAGE AT SITE OF THE EFFLUENT TREATMENT PLANT OF CAPACITY 70 M3/HR CONSISTING OF THE FOLLOWING COMPLETE AS SPECIFIED BUT NOT LIMITED TO THE SAME: MECHANICAL PRIMARY SEPARATING SYSTEM CONSISTING OF PLATE SEPARATOR FITTED INSIDE THE UNDERGROUND EFFLUENT HOLDING TANK, BAR SCREEN AT INLET, BELT TYPE OIL SKIMMER ETC. COMPLETE AS PER SPECIFICATION. SECONDARY SEPARATING SYSTEM CONSISTING OF: A) MULTIMEDIA FILTER WITH FRONTAL PIPING, VALVE, ETC.B) COALESCER FILTER/ACF WITH FRONTAL PIPING, VALVES, ETC.CENTRIFUGAL PUMP SET OF CAPACITY OF 70 M3/HR. WITH SUITABLE HEAD INCLUDING ELECTRICAL MOTOR, COMMON BASE PLATE, ACCESSORIES, ETC-2 NUMBER TREATED WATER TRANSFER PUMP OF CAP. 70 M3/HR AT 35 MWC WITH MOTOR AND ALL ACCESSORIES. OIL RECOVERY PUMP OF CAP. 2 M3/HR AT 35 MWC WITH MOTOR AND ALL ACCESSORIES. SUITABLE CAPACITY SUBMERSIBLE PUMP (PORTABLE) AND FLEXIBLE DELIVERY PIPE OF 12 METER LONG FOR SLUDGE REMOVAL FROM THE EFFLUENT UNDERGROUND HOLDING TANK WITH SUITABLE POWER CONNECTIONS.INTERCONNECTING PIPING AND VALVE FOR COMPLETE ETP TRAVELLING BEAM WITH SUITABLE CAPACITY CHAIN PULLEY BLOCK ELECTRICAL MOTOR CONTROL CENTER (MCC) FOR ALL ELECTRICAL DRIVES EARTHING AND LIGHTNING PROTECTION POWER CABLES, CONTROL CABLES, CABLE TRAYS, SUPPORTS, LOCAL CONTROL STATION (LCS) AND ACCESSORIES, INSTRUMENTATION OIL WATER INTERFACE DETECTORS-3 NUMBER FLOAT TYPE LEVEL SWITCH-2 NUMBER INTERCONNECTING CABLING, GI CONDUIT, CABLE TRENCHES CONTROL PANEL INCLUDING ANNUNCIATION AND PUSH BUTTONS DIFFERENTIAL PRESSURE GAUGE PRESSURE GAUGE-7 NUMBER ONLINE ANALYSER ERECTION, TESTING, COMMISSIONING AND PAINTING OF MECHANICAL, ELECTRICAL AND INSTRUMENTATION EQUIPMENT OF EFFLUENT TREATMENT PLANT. THE QUOTED RATES SHALL BE INCLUSIVE FOR SUPPLY OF FOLLOWING SPARES: FILTER FEED PUMP O RING SET-2 SET GLAND PACKING/MECHANICAL SEAL-2 SET, BEARINGS FOR PUMP AND MOTOR-2 SET, TREATED WATER TRANSFER PUMP: O RING SET-2 SET, GLAND PACKING/MECHANICAL SEAL-2 SETS, BEARING FOR PUMP AND MOTOR–2 SET OIL RECOVERY PUMP, O RING SET-2 SET GLAND PACKING/ MECHANICAL SEAL-2 SET, BEARINGS FOR PUMP MOTOR-2 SET, SUBMERSIBLE DRAIN PUMP: O RING SET-2 SET, GLAND PACKING/MECHANICAL SEAL-2 SET, BEARINGS FOR PUMP AND MOTOR-2 SET, OIL SKIMMER, BEARINGS FOR GEAR BOX AND MOTOR-1 SET, CONTACTOR FOR, FEED WATER PUMP MOTOR FEEDER-1 SET , OIL SKIMMER MOTOR FEEDER-1 SET, OIL RECOVERY PUMP MOTOR FEEDER-1 SET, ONE NUMBER MPCB OF EACH RATING-1 SET LED INDICATING LAMPS, RED COLOUR-2 SET, GREEN COLOUR-2 SET, AMBER COLOUR-2 SET: INSTRUMENT SPARE: A) OIL WATER INTERFACE DETECTORS-1 SET.B) FLOAT TYPE LEVEL SWITCH-1 SET.C) FUSE FOR CONTROL PANEL-1 SET.D) INDICATING LAMP/ANNUNCIATION WINDOW-2 SET.E) PRESSURE GAUGE-1 SET.DURING THE CONTRACT PERIOD, SUPPLIER SHALL ENSURE VISIT OF THEIR SERVICE PERSONNEL TO THE SITE MINIMUM TWO TIME A YEAR-ON HALF YEARLY BASIS(PREVENTIVE/EMERGENCY/BREAKDOWN VISIT FOR CARRYING OUT REGULAR MAINTENANCE WORK. THE HALF YEARLY VISITS WILL BE PLANNED IN CONSULTATION WITH HPCL.

SUPERVISION CHARGES BY — SUPERVISION CHARGES BY OEM AS PER ATTACHMENT.