Metalling and tarring/Resurfacing of road near park, Ward No 1 ,2 upto Bus Stand, Baddi

Amount

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 (By mechanical means) as per Technical Specification Clause 404. including carriage of materials in all leads and lifts including mechanical means.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading iii ( 40mm to 25mm ) (By mechanical means) as per Technical Specification Clause 404. including carriage of materials in all leads and lifts including mechanical means.

Providing and applying tack coat with bitumen emulsion ( RS -1)using pressure [email protected] per sqm on the non bituminous surfaces cleaned with hydraulic broom as per technical specification clause 303

Providing and laying bituminous concrete 30mm thick with 100-120 TPH batch type hot mix plant producing an average out put of 75 tonnes per hour using crushed aggregate of specified grading,premixed with bituminous binder @ 5.4 to 5.6 percent of mix and filler , transporting the hot mix to work site , laying with a hydrostatic paver finisher with sensor control to the required grade, level and alingment , rolling with smooth wheeled vibratory and tandem rollers to achive the desired compaction as per MORTH specification clause no. 509 complete in all respects.

Providing and Laying seal coat sealing the voids in a bitumionus surface lais to a specified level , grade and cross fall using type A, B and C as per TSC 510(Bitumen S -90)

Raising the height of chambers of newly laid sewrage including fixing of ring and providing old cover

JARNAIL SINGH

Narinder Kumar