Repair to Steel Furniture including painting unit at Faridkot Mil Stn

Amount

ALMIRAH LARGE STEEL FD-1031, 1033 Taking down old damaged leg of Almirah large steel and providing new leg of PBI sheet 1mm thick of size 450x100x100mm made to shape including gas welding and painting two coats of synthetic enamel paint olive green over a coat of primer , rest all ashown on Drawing and directed by Engineer-in-Charge.

Re-setting of existing dislocated shelves of Almirah Large steel by providing with appropriate size of clamps, nut and bolts to reset the shelves at their place rest all as shown on Drg and directed by Engr-in-Charge.

Removing of old unserviceable lock from Almirah Large steel and S&F new lock of six levers complete all as specified and shown on drawing. Make Harrison/Reena

Removing of old unserviceable Handle from Almirah Large steel and S&F New CP (Chromium Plated) Handle 100 mm long as approved by GE. Rest all as shown on drawing.

Preparation of existing painted steel surfaces of Almirah Large steel inside and outside by carrying out denting,filling putty and scraping with sand paper where reqd and applying one coat of paint synthetic enemel olive green paint (Shalimar/Nerolac/Asian) all as specified and directed by Engineer-in Charge. Note :- Painting shall be done in BSO yard or unit line/quarters with written approval of Engr-in-Charge.

ALMIRAH MED STEEL FD-1032, 1034, 243 Taking down old damaged leg of almirah med steel and S&Fnew leg of PBI sheet 1 mm thick of size 450x100x100mm made to shape including gas welding and painting two coats of synthetic enamel paint olive green over a coat of primer complete all as specified and as shown on drgs and directed by Engineer-In-Charge.

Re-setting of existing dislocated shelves of Almirah Med steel by providing with appropriate size of clamps, nut and bolts to reset the shelves at their place rest all as shown on drg as and directed by Engr-in-Charge.

Removing of old unserviceable lock from Almirah Med steel and S&F new lock seven levers complete all as shown on drawing. Make Harrison/Rina/ Victory.

Removing of old unserviceable Handle from Almirah Med steel and S&F New CP (Chromium Plated) Handle 100 mm long as approved by GE. Rest all as shown on drg

Preparation of existing painted steel surfaces of Almirah Med steel inside and outside by carrying out denting,filling putty and scraping with sand paper where reqd and applying one coat of paint synthetic enamel olive green paint (Shalimar/Nerolac/Asian) all as specified and directed by Engineer-in Charge. Note :- Painting shall be done in BSO yard or unit line/quarters with written approval of Engr-in-Charge.

CHARPOY GI PIPE : FD-220 : Dismantling of old unserviceable long rail from charpoy GI pipe and S&F of new long rail of GI tubing 32mm Bore medium grade ISI marked duly threaded at both ends as per drawing. Make : TATA/JINDAL/PRAKASH SURYA.

All as per ser No 11 here in before but Cutting and threading of old unserviceable long rail retrieved from item No. 11 above and converted into two short rails.

All as per ser No 11 here in before but short rail and Cutting and threading of old unserviceable short rails retrieved above and converted into two leg. One end threaded and other end provided with 40mm dia 3mm thick MS sheet by continuous welding. MNF clamp shall be provided by welding as specified in drawing and painted with black enameled paint.

All as per ser No 11 here in before but Removing of old unserviceable 3 way elbow and supply and fixing of new 3 way elbow GI 32mm bore ISI Marked weight not less than 400 gram each.

All as per ser No 11 here in before but Removing of old unserviceable Check nut GI from charpoy GI pipe and supply and fixing of new Check Nut GI 32 mm bore weight not less than 100 gram each.

All as per ser No 11 here in before but Removing of old unserviceable MDF board from charpoy GI pipe MDF and convert to charpoy GI Pipe Ply top, and supply & fixing of 12mm thick, BWR grade, 7ply type BB, plywood commercial of size 900x1950x12mm on top of charpoy GI pipe fixed with appropriate size nut & bolts with double washers. Make : KIt Ply/Green Ply/Eco Ply

All as per ser No 11 here in before but Removing of old unserviceable Plywood from charpoy GI pipe and supply & fixing of 12mm thick, BWR grade, 7ply type BB, plywood commercial of size 900x1950x12mm on top of charpoy GI pipe fixed with appropriate size nut & bolts with double washers. Make : National/KIt Ply/Green Ply/Eco Ply

TEAPOY VERANDAH FD-383, 255 Dismantling of old U/S top and S&F new top of of size 900x450x18mm thick prelaminated particle board one side natural teak faced and another side white interior grade including 4mm thick teak wood/sheesham wood beading alround fixed with the top as specified and shown on drg. Make : National/Bhutan Board/Deco

All as per ser Item No 18 here-in-before but Gas welding to broken parts of frame wherever required and grinding to smooth finish. Welding alround consider one point

All as per item No. 18 here in before but M&L for welding/denting and painting of steel frame of" Teapoy Varandah" cleaning of dust and applying one coat of synthetic enamel paint white complete all as specified and directed by Engineer in Charge.

LOCKER BED SIDE STEEL FD-1029, 257 Replacement of unserviceable/broken leg and supply & fixing new legs made to shape out of 1 mm thick MS sheet as shown on drawing including gas welding and painting with one coat of synthic enamel paint (OG) complete all as specified and directed by Engineer in Charge.

All as per ser Item No. 21 here-in-before but taking down old unserviceable/damage hasp and staple from locker bed side steel and supplying & fixing new hasp and stapple 100mm long x25mm wide x 2.5 mm thick chromimum plated as approved by GE. Rest all as shown on drawing.

All as per ser Item No. 21 here-in-before but Removing of old unserviceable/damage handle of Locker bed side steel and supplying & fixing new handle 125mm long chromium plated of best quality as approved by GE. Rest all as per drg.

All as per ser Item No. 21 here-in-before but M&L for Preparation of existing painted steel surfaces of Locker bed side steel inside and outside by carrying out denting,filling putty and scraping with sand paper where reqd and applying one coat of paint synthetic enamel olive green paint (Shalimar/Nerolac/Asian) all as specified and directed by Engineer-in Charge. Note :- Painting shall be done in BSO yard or unit line/quarters with written approval of Engr-in-Charge.

TABLE 900X600X760 MM WITHOUT DRAWER STEEL (FD-1007) : Dismantling of old unserviceable existing leg & S&F new legs made to shape and size of 25mm square tube of wall thick ness 1.6mm by gas welding. All as specified and shown on drawing complete all as directed by Engr-in-Charge. .

All as per ser No. 25 here in before but Dismantling of existing unserviceable top of table and S&F new top of prelaminated particle board of size 900x600x18mm thick (exterior grade) providing 4mm thick teak wood beading alround the top of table after French polished. All as specified & shown on drawing. Make : National/Bhutan Board/Deco

All as per ser No. 25 here in before but M&L for denting welding of crack joints riveting & repaired exposed to view shall be painted with one coat of synthetic enamel paint after preparation of steel surfaces. Painting shall be done with spray painting. All specified and shown on drg

All as per ser No. 25 here in before but Removing of old existing unserviceable shoes and S&F new PVC Hard rubber shoes of approved quality to bottom of leg.All as specified and shown on drawing.

TABLE 900X600X760 MM WITH DRAWER STEEL (FD-1008) : Dismantling of old unserviceable existing leg & S&F new legs made to shape and size of 25mm square tube of wall thick ness 1.6mm by gas welding. All as specified and shown on drawing.

All as per ser No. 29 here in before but Dismantling of existing unserviceable top of table and S&F new top of prelaminated particle board 18mm thick one side natural teak faced and other white (exterior grade) providing 4mm thick teak wood beading alround the top of table after French polished. All as specified & shown on drawing. Make : National/Bhutan Board/Deco

All as per ser No. 29 here in before but Replacement of unserviceable/damaged drawer from table with new drawer made out of 1 mm thick PBI sheet including painted with two coats of synthetic enamel paint over a coat of red oxide (primer) rest all as per drg and as directed by Engr-in-Charge.

All as per ser No. 29 here in before but M&L for denting welding of crack joints riveting & repaired exposed to view shall be painted with one coat of synthetic enamel paint after preparation of steel surfaces. Painting shall be done with spray painting. All specified and shown on drg

All as per ser No. 29 here in before but lock to the table by appropriate steel screw / rivets of approved quality complete all as specified and shown on drawing.

All as per ser No. 29 here in before but Removing of old existing unserviceable shoes and S&F new PVC Hard rubber shoes of approved quality to bottom of leg.All as specified and shown on drawing.

TABLE OFFICE CLERK STEEL FD-84(M), 1004 M&L for dismantling of old Unsv top and S&F new top of prelaminated particle board of size 1200x610x18mm thick one side natural teak faced and other side commercial, providing with 4mm thick teak wood beading alround the top of table after French polish complete all as specified & shown on drawing. Make : National/Bhutan Board/Deco

All as per ser No. 35 here in before but Replacement of unserviceable/damaged drawer from table with new drawer made of 1 mm thick PBI sheet including painted with two coats of synthetic enamel paint over a coat of red oxide (primer) rest all as per drg and as directed by Engr-in-Charge.

All as per ser No. 35 here in before but removing of old unsv lock to the table and supply & fix by appropriate steel screw / rivets complete all as specified & shown on drawing.

All as per ser No. 35 here in before but leg made to shape and size of 25mm square tube of wall thickness 1.6mm by gas welding complete all as specified and shown on drawing.

All as per ser No. 35 here in before but PVC Hard rubber shoes of approved quality to bottom of leg complete all as specified and shown on drawing.

All as per ser No. 35 here in before but M & L for Preparation of existing painted steel surfaces of Table Office Clerk and applying one coat of synthetic enamel paint out side/ inside of the item after removing dust and stains with sand paper and painting shall be done with standard workship complete all as specified and directed by Engr-in-Charge. Note :- Painting shall be done in BSO yard or unit line/quarters with written approval of Engr-in-Charge.

TABLE OFFICE OFFICER STEEL (FD-1003) : M&L for Dismantling of existing unserviceable top of table and S&F new top of prelaminated particle board of size 1680x870x18 mm thick one side natural teak faced and other side commercial, providing 4mm thick teak wood beading alround the top of table after French polished. All as specified & shown on drawing. Make : National/Butan Board/Deco

All as per ser No. 41 here in before but Replacement of unserviceable/damaged drawer from table and supply & fix new drawer made of 1 mm thick PBI sheet including painted with two coats of synthetic enamel paint over a coat of red oxide (primer) rest all as per drg and as directed by Engr-in-Charge.

All as per ser No. 41 here in before but Dismantling of old unserviceable existing lock and S&F new lock with duplicate keys rest all as per drg and as directed by Engr-in-Charge. Make Harrison/Reena/Victory.

All as per ser No. 41 here in before but Dismantling of old unserviceable existing leg S&F new legs made to shape and size of 25mm square tube of wall thick ness 1.6mm by gas welding. All as specified and shown on drawing.

All as per ser No. 41 here in before but Removing of old existing unserviceable shoes and S&F new PVC Hard rubber shoes of approved quality to bottom of leg.All as specified and shown on drawing.

All as per ser No. 41 here in before but M & L for Preparation of existing painted steel surfaces of Table Office offrs steel and applying one coat of synthetic enamel paint out side/ inside of the item after removing dust and stains with sand paper and painting shall be done with standard workmanship complete all as specified and directed by Engr-in-Charge. Note :- Painting shall be done in BSO yard or unit line/quarters with written approval of Engr-in-Charge.

TABLE 900X900X760 MM (FD-1009) : Dismantling of existing unserviceable top of table and S&F new top of prelaminated particle board 900x900x18mm thick one side natural teak faced and other side commercial providing 4mm thick teak wood beading alround the top of table after French polished. All as specified & shown on drawing. Make : National/Butan Board/Deco

All as per ser No. 47 here in before but Dismantling of old unserviceable existing leg S&F new legs made to shape and size of 25mm square tube of wall thick ness 1.6mm by gas welding. All as specified and shown on drawing.

All as per ser No. 47 here in before but Removing of old existing unserviceable shoes and S&F new PVC Hard rubber shoes of approved quality to bottom of leg.All as specified and shown on drawing.

All as per Ser No. 47 here in before but Preparation of existing painted steel surfaces of Table will be applied one coat of synthetic enamel paint to out side of the item after removing dust and stains with sand paper and painting shall be done with standard workmanship. Rest all as specified and directed by Engr-in-Charge. Note :- Painting shall be done in BSO yard of unit line/qtrs with written approval of Engr-in-Charge.

Chair CB Steel With/Without Arms FD-75(M) :-S&F MS flat size 500x20x5mm thick with gas welding to chair CB steel with arms 02 Nos to each chair under seat joining both ends duly painted with synthetic enameled OG paint after applying two coat of primer complete all as specified and shown on drawing No FD-75 (M)

All as per srl item No. 51 here in before above but size 420x20x5mm thick to chair CB steel without arms 2 Nos to each chair complete all as specified and shown on drawing No FD-75 (M).

All as per Ser No. 51 here in before but S&F of seasoned 2nd class hard wood seat frame suitable for chair CB steel tubular with arms woven with 2mm wide cane plastic in true Godrej pattern complete all as specified and shown on drawing No FD-75 (M).

All as per srl item No. 51 here-in-before but suitable for chair CB steel tubular without arms.

All as per Ser No. 51 here in before but S&F seasoned 2nd class hard wood back frame suitable for chair CB steel tubular with arms woven with 2mm wide cane plastic in true godrej pattern complete all as specified and shown on drawing No FD-75 (M).

All as per srl item No. 51 here-in-before but suitable for chair CB steel tubular without arms.

All as per Ser No. 51 here in before but S&F of arms to chair CB steel with arms made out of well seasoned 2nd class Hard wood duly painted with two coats of synthetic enamel black paint as directed and shown on drawing No FD-75 (M).

All as per Ser No. 51 here in before but Spray painting to steel frame complete chair CB steel with arms drawing No-75 (M) after preparation of surface with synthetic enamel OG Paint.

All as per srl item No. 51 here-in-before but chair CB steel without arms.

TABLE DINING ORS FD-165: Removing of old UNSV Top from table dining ORs and S&F new table top made out of MDF board commercial type ISI marked 18mm thick duly covered with aluminium sheet 22 gauge of required size complete all as specified and shown on drg complete all as directed by Engr-in-Charge.

All as per ser Item No. 60 here-in-before but Removing of old UNSV legs and S&F of new legs Made of 25 Sq mm MS tube having 1.6mm wall thickness of 760mm high by Gas welding complete all as directed by Engr-in-Charge.

All as per ser Item No. 60 here-in-before but Gas welding to broken parts of frame wherever required and grinding to smooth finish. Welding alround consider one point complete all as directed by Engr-in-Charge.

All as per ser Item No. 60 here-in-before but Removing of old UNSV hard rubber shoes and S&F new PVC/ Hard rubber shoes of approved quality complete all as directed by Engr-in-Charge.

All as per ser Item No. 60 here-in-before but M&L for painting of steel frame with a coat of synthetic enamel paint black after preparation of surfaces smooth finish complete all as directed by Engr-in-Charge. Paint shall be used of Berger/ Asian/Nerolac.

DESK 4'X2' STEEL (FD-1021) : Dismantling of old unserviceable existing top & S&F new top of 18mm thick prelaminated particle board one side natural teak faced and other side commercial including 4mm thick teak wood beading fixed with front of the top complete all as specified shown on drawing Make : National/Bhutan Board/Deco

Preparation of painted steel surfaces as in round of "Desk" cleaning of dust and applying one coat of synthetic enamel white paint rest all as per drg and as directed by Engr-in-Charge.

RACK ADJUSTABLE STEEL 6 SHELVES (1905MMX915MMX610MM) : FD-1038 Re-setting of existing dislocated shelves of rack adjustable steel 6 shelves open type of size 1905mmx915mmx610mm by providing with appropriate size of clamps, nut and bolts to reset the shelves at their place rest all as shown on Drg and directed by Engineer-in-Charge

Preparation of existing painted steel surfaces of Rack adjustable 6 shelves open type of size (1905mmx910mmx610mm) inside and outside by carrying out denting, filling putty and scrapping with sand paper where required and applying one coat of synthetic enamel olive green paint (Shalimar/Nerolac/Asian). Rest all as specified and directed by Engr-in-Charge. Note : Painting shall be done in BSO yard or unit line / quarters with prior approval of Engineer-in-Charge.

Table Bed Side steel TP: Gas welding to broken parts of frame whereever required and frinding to smooth finish. Welding alround of pipe consider one point.

Dismantling of old unserviceable existing top & S&F new top of 18mm thick prelaminated particle board one side natural teak faced and other side commercial including 4mm thick teak wood beading fixed with front of the top complete all as specified shown on drawing Make : National/Butan Board/Deco

Preparation of existing painted steel surfaces of table bed side steel inside and outside by carrying out denting, filling putty and scrapping with sand paper where required and applying one coat of synthetic enamel olive green paint (Shalimar/Nerolac/Asian). Rest all as specified and directed by Engr-in-Charge. Note : Painting shall be done in BSO yard or unit line / quarters with writeen approval of Engineer-in-Charge.

TRESTLE STORE ROOM STEEL FD-1043 Gas welding to broken parts of frame whereever required and griding to smooth finish. Welding alround consider one point rest all as shown on Drg and directed by Engineer-in-Charge

Preparation of existing painted steel surfaces of Trestle store room inside and outside by carrying out denting, filling putty and scrapping with sand paper wher required and applying one coat of synthetic enamel olive green paint (Shalimar/Nerolac/Asian). Rest all as specified and directed by Engr-in-Charge. Note : Painting shall be done in BSO yard or unit line / quarters with writeen approval of Engineer-in-Charge.

SIDE RACK STEEL WITH TRAY THREE SPACES : FD-1023 Re-setting of existing dislocated side rack steel with tray three spaces by providing with appropriate size of clamps, nut and bolts to reset the shelves at their place rest all as shown on Drg and directed by Engineer-in-Charge

Preparation of existing painted steel surfaces of side rack steel with tray three spaces inside and outside by carrying out denting, filling putty and scrapping with sand paper where required and applying one coat of synthetic enamel olive green paint (Berger/Nerolac/Asian). Rest all as specified and directed by Engr-in-Charge. Note : Painting shall be done in BSO yard or unit line / quarters with writeen approval of Engineer-in-Charge.

FORM WITH BACK AND FORM WITHOUT BACK (FD-77) : Supply of well seasoned sheesham wood plant in single piece free from knots and cracks size 1800mmx225mmx25mm and fixing the same with 09 Nos of GI nuts and bolts as shown in drawing duly french polished after preparation of surface.

All as per ser No 76 here in before but size 1800mmx150mmx19mm suitable for back, fixing with 02 each GI nuts and bolts on each side as shown on drawing.

Replacement of worn out conduit size 25 sqmm, 16 gauge whereever required including welding and painting complete all as per drg and as directed by Engr-in-Charge.

Painting to steel surface of form with back with one coat of synthetic enamel paint black after preparation of surfaces complete all as per drg and as directed by Engr-in-Charge.

Painting to steel surface of form without back with one coat of synthetic enamel paint black after preparation of surfaces complete all as per drg and as directed by Engr-in-Charge.

CHAIR WRITING STEEL FD/E6/MAP/12 Removing of unserviceable cushion seat and back with upholestered Tapestry Cloth and PVC beading and providing new materials in superior quality and providing in serviceable condition duly repaired in all respect complete all as shown on Drg and directed by Engineer-in-Charge

All as per Ser No 81 here-in-before but Replacing of UNSV Arms handles made of ply propylene, Co-polyme as directed by Engineer-in-Charge.

All as per ser Item No 81 here-in-before but M&L for preparation of old painted surfaces of chair cushioned with arms and applying one coat of synthetic enamel paint (black colour) on chair cushioned with arms complete all as directed by Engr-in-Charge. Paint shall be used of Berger/ Asian/Nerolac.

CHAIR REVOLVING STEEL WITH ARMS (TP) : Removing of unserviceable Cushion Seat, Padded Back with upholestered Leather/Tapestry Cloth, Padded cushion of Arms and providing New materials in superior quality and repair/removing of unsv parts of tiltting Mechanisam with wheel system and providing in serviceable condition duly repaired in all respect as directed by Engr-in-charge.

All as per ser Item No. 84 here-in-before but Replacing of bearing of revolving chair

All as per ser Item No. 84 here-in-before but Replacing of unsv wheel . Make: Johnson

All as per ser Item No. 84 here-in-before but Replacing Hydrolic fitting as directed by GE/Engr-in-charge

All as per ser Item No. 84 here-in-before but Replacement of Base assembly of chair revolving as exsiting and as directed by Engr in -charge

TABLE CENTRE BRASS FD-375 Taking down old cracked / broken top and supply and fixing new top shall be of 12mm thick plate tinted glass with corners rounded all as shown on Drg and directed by Engineer-in-Charge. Make of Glass : Modiguard / Atul. The edges of top of table shall be rounded off.

All as per Ser item No. 89 here-in-before but Gas welding to broken parts of frame whereever required and griding to smooth finish and polish with brasso to smooth finish. Welding alround consider one point rest all as shown on Drg and directed by Engineer-in-Charge

CHARPOY FOLDING IP WITH HARD TOP FD-388 (R) Dismantling of old unserviceable ply top from charpoy folding and supply & fixing of 8mm thick, BWR grade. Complete all as per drg and as directed by Engineer-in-Charge.

All as per Ser item No. 91 here-in-before Gas welding to broken parts of frame whereever required and griding to smooth finish. Welding alround consider one point rest all as shown on Drg and directed by Engineer-in-Charge

All as per ser No 91 here in before but Removing of old unserviceable hard rubber shoes and S&F new PVC Hard rubber shoes of approved quality. All as specified and shown on drawing.

All as per ser No. 91 here-in-before M & L painting to steel frame of charpoy folding with ply top with one coat synthetic enamel paint black after preparation of surface (Shalimar/Nerolac/Asian). Rest all as specified and directed by Engr-in-Charge. Note : Painting shall be done in BSO yard or unit line / quarters with writeen approval of Engineer-in-Charge. Note :- A Sum of Rs. 32610.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 27 (Schedule of credit) of Tender Documents.

G.S CONSTRUCTION.CO

M/s NIRMAN BUILDERS