SPECIAL REPAIRS TO BLDG NO. NP-05 AND NP-06 OF MES COMPLEX, BLDG NO. P- 188 AND P-189 AT MT GARRAGE AND PROVN OF HARD STANDING AT SEC HOSP, UNDER GE (SOUTH) MAMUN

Amount

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Surface excavation, n exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Removing surplus excavated material to a distance exceeding 250 mtrs but not exc. 500 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Rolling and consolidating formation surfaces in cutting with power roller 8 to 10 tone capacity, complete all as specified and directed.

M&L for hard core of broken boulders, gauge n exc 63 mm deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for 100 mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in sub base surfaces finished even and rough to receive top floor finish complete all as specified and directed.

Demolition of concrete interlocking paver block of any shape and size as in floors laid dry, complete all as specified and directed.

M&L for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block of any shape and size having high glossy finish confirming to IS 15658-2006 of 80 mm thickness epoxy coated, M-35 Grade, laid dry over and including 50 mm thick sand cushion using clean & washed river sand as approved complete all as specified and directed.

M&L for pre cast PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) solid blocks, as bed plates, kerbs stones for embedding interlocking paver blocks, with plain or interlocking joints as directed and setting in CM 1:6, complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in beams, seismic and other similar bands, coping to top of brick work, cantilever, bressummers, bed plates, apex stone, plinth course lintels upto 1.5m span including necessary form work, complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in sub floor surfaces finishedeven and rough to receive top floor finishes complete all as specified and directed.

M&L for 50 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in floors,laid in panels n exc 2.5 sqm each, surfaces finished even and smooth using extra cement, including demolition of existing floor, complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6, type C-1, using 20mm graded stone aggregate as in plinth protection, surfaces finished even and smooth using extra cement, incl forming necessary joint and filling with mixture of paving bitumen & sand in 1:3, including demolition of existing, damaged plinth, complete all as specified and directed.

M&L for 20 mm thick granite slabs, in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement mortar using marble dust with admixture of pigments to match with granite shade, complete all as specified and directed.

M&L for rounding of granite stone slab edges, in steps, cooking platform and other similar situations, complete all as specified and directed.

M&L for marble Green/Bhaisana Zebra 18-20 mm thick (table rubbed and pre mirrior polished) in single piece in steps (treads and risers) and floors, jointing in neat cement slurry including pointed in epoxy grout to match marble shade.laid over 15mm thick screed bed in cement mortar 1:4 or or 10 mm backing coat in vertical surfaces, complete all as specified and directed.

M&L for non-skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm in floor etc set & jointed in neat cement slurry & pointed in white or coloured cement mixed with pigment to match, laid over and including 15mm thick screed layer in cement mortar 1:6, including dismantling existing floor, hearth or wall tiles etc. complete all as specified and directed.

M&L for non-skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.16 sqm in floor etc set & jointed in neat cement slurry & pointed in white or coloured cement mixed with pigment to match, laid over and including 15mm thick screed layer in cement mortar 1:4, including dismantling existing floor, hearth or wall tiles etc. complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, etc., set and jointed in neat cement slurry and pointed with coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4, including dismantling existing floor, hearth or wall tiles etc. complete all as specified & directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, dressed stone work including removal of debris from site & deposited where directed complete all as specified and directed.

M&L for brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specifiedand directed.

All as per description of Srl item no 21 here in before but except bricks. Note : Serviceable bricks retrieved from dismantling existing brick work shall be reused.

Taking down cement plaster, hacking for keys, raking out joints, of old brick work built in cement morter and scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15 mm thick plaster in two layers, 5mm thick in cement mortar 1:4 over 10 mm thick cement morter in CM 1:6, mixed with liquid water proofing compound finished even and smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately as supply only.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for rendering 10 mm thick plaster in cement mortar 1:6, on faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick cement plaster in cement mortar 1 :3 on ceiling surfaces and finished even and smooth without using extra cement, complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying 2mm thick wall care putty, making the surface smooth by rubbing with sand paper and applying two coats of oil emulsion distemper complete all as specified and directed.

M&L for preparation of newly plastered or surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer, complete all as specified and directed.

M&L for preparation of old plastered or surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered or surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old plastered or surfaces of walls and applying two coats of white wash including rubbing down withwire brush scrapping down smoke roots, mounds salts and treading oil and greasy spots, complete all as specified and directed.

M&L for complete removal of existing treatment, preparing the surfaces applying 02 mm thick wall care putty, making the surface even & smooth and applying two coats of oil emulsion distemper, complete all as specified and directed.

Removing old lime wash (if any), hacking for keys, raking out joints of old brick work built in lime or mud or cement mortar, not previously plastered and scrubbing down with water etc. complete all as specified and directed.

M&L for complete removal of existing treatment, preparing the surfaces making the surface even & smooth and applying two coats of cement based paint over a coat of alkali resistant primer, complete all as specified and directed.

M&L for preparation of old surfaces of iron or steel of any description over 10cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and directed.

M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjas / canopy / parapet wall, to be executed through approved applicator of the membrane manufactured with following specifications, complete all as specified and directed :- (a) Cleaning the top surface of RCC roofing properly with water. (b) Applying bitumen primer @ 0.30 Litre / Sqm, manufactured by the same agency as that of APP with a density 0.87-0.89 KG / Litre at 25 degree centigrade on prepared surface. (c) Laying of membrane not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 KG/Sqm reinforced with non woven polyster fiber weight not less than 160 Gms/Sqm using butane torch by torch application with 10cm overlap and 15cm end lap. (d) Top of membrane shall be provided with solar reflective bituminous aluminum paint @ 0.10 KG / Sqm as prescribed by manufacturer of membrane. (e) APP Membrane shall be stick inside parapet where available by cutting, chases and sealed with PCC 1:2:4, type B-0, complete all as specified and directed.

M&L for 10mm thick cement plaster in cement mortar 1:4 finished even & smooth over & including 40mm thick PCC 1:2:4 type B-1 over neat cement slurry @ 3Kg/Sqm on existing concrete surface etc complete all as specified and directed.

M&L for 40 mm thick brick tiles laid over and including 15mm thick cement mortar 1:6 and joints grouted in cement mortar 1:3 mixed with 5% of crude oil by weight of cement, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in surface channels & drains, complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) area not exc. 1.5 Sqm each, complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) area exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composit) solid door/windows/ceosetory windows & other frames/chowkhat of size 50 x 125 mm comprising of vigin PVC polymer of K value 58-60 (suspension grade), calcium carbonate & natural fibres (wood powder/rice husk/ weat husk) and non additives (maximum toxicity index of 12 for 100gms) fabricated with mitre joints after applying PVC solvent cement and screwed with fully body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrwal strenght of 2200N (face), 1100n (edge), minimum compressive strength 58 N/Sqmm, modulas of elasticity 900N/sqmm and resistence to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retrdant and fixed position MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note:- MS hold fasts/lugs or SS fasteners shall bemeasured and paid separately

S&F factory made single extruded WPC (Wood Polymer Composit) solid door/windows/ceosetory windows & other frames/chowkhat of size 50 x 100 mm comprising of vigin PVC polymer of K value 58-60 (suspension grade), calcium carbonate & natural fibres (wood powder/rice husk/ weat husk) and non additives (maximum toxicity index of 12 for 100gms) fabricated with mitre joints after applying PVC solvent cement and screwed with fully body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrwal strenght of 2200N (face), 1100n (edge), minimum compressive strength 58 N/Sqmm , modulas of elasticity 900N/sqmm and resistence to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retrdant and fixed position MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note:- MS hold fasts/lugs or SS fasteners shall bemeasured and paid separately

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkaht of size 45 x 70 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete. (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately) Note : for WPC Solid door/ window frames minus 5mm tolerance in demension i.e. deapth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative Flush door shutter of 30mm thickness comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately)

S&F 35 mm thick factory made wire guazed and skeleton shutters (2nd class hardwood) , open rebated and prepared to receive wire cloth, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing wire cloth, etc.; sizes of me-mbers of shutters as specified fitted to chowkats including preparation of surfaces of shutters and application of two coats of synthetic enamel paint over a coat of pink primer, etc complete all as specified and directed.

Supply and fix for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel heaving a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail, on inner side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile and rails with suitable PVC sheet beeding and jointed together with solvent cement in the frame at site as per specifications and drawing, complete all as specified and directed.

S& F 18 mm thick lead free factory made 100% solid WPC (wood polymer composite) sheet for cupboard / Kitchen cabinet shutters and frames having high natural fiber content 25 to 30% wood colour sheets with density not less than 500 kg/ cum and the weight of sheet of 1 sqm should be 11 kg (+/- 5%) manufactured by ISO 9001-2015 certified company. the sheet should be 100% water proof, termite proof, fire retardant, manufacured by single layer extrusion process with excellent screw holding capacity and shore D hardness fixed with screws to wooden framework, complete all as specified and directed.

S&F in repairs stainless kitchen plate rack 750x900 mm of approved make fixed with mild steel screws, complete all as specified and directed.

S&F 300 mm mild steel, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified & directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handle fabricated adodized ISI marks, complete all as specified & directed.

S&F 100 mm size extruded aluminium alloy handle fabricated adodized ISI marks, complete all as specified & directed.

S&F 100 mm long butt hinge type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised sliding door bolt with hasp, staple bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 100 mm hasp and staple extruded aluminium alloy fabricated adodized, including bolt to hing plate, ISI marked, complete all as specified & directed.

S&F for steel windows with side hung shutter including projecting type hingeswith steel handle and steel peg stay, including two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F 3mm thick Figured glass, pinhead type in squares n exc 0.5 sq. m each pane fixed with oil putty complete all as specified and directed.

S&F in repairs 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, after hacking and removing existing, complete all as specified and directed.

S&F GI wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or rubber/aluminium beads complete all as specified and directed.

S&F in repairs 20 mm bore stainless steel drapery rod with 1.0 mm thick PVC wood grain coating including brackets and knobs, fixed on windows and doors for hanging curtains, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description exc 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F in repairs, Vitreous china wash down water closet pan (Pedestal pattern) white (excl fixing bolts, including plastic water closet seat cover, white, closed pattern with flat bottom and mild steel CP or aluminised hinging device complete all as specified and directed.

S&F in repairs PVC corner shelf assembly, minium weight 300 gms, fixing with chromium plated brackets, guards, complete all as specified & directed.

S&F in repair steel water tubing 15 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S&F in repair steel water tubing 20 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S&F in repairs rotational moulded polyethlene water storage tank, 500 ltrs capacity, three layers, ISI marked, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed refixing of inlet, outlet & over flow pipe etc. (Minimum weight of 20mm ball valve - 210 gms including dismantling of old broken water tank complete all as specified and as directed.

S&F in repairs Stop valve/Angle valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and as directed.

S&F in repairs 15mm bore bib tap, long body, fancy type, with flange, cast copper alloy fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repairs Stop valve/Angle valve (ISI Marked), long shank and cup, consealed, fancy type cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore ccomplete all as specified and as directed.

S&F in repairs brass chromium plated soap dish with and including CP screws complete all as specified and as directed.

S&F in repairs 15 mm bore pillar cock fancy type brass chromium plated, screwed down, high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe, complete all as specified and as directed.

S&F in repairs Vitreous china full pedestal pattern wash basin , white flat back including waste pipe, brackets and cutting for and pinning in ends of brackets, 32 mm dia PVC waste pipe including waste coupling, and connecting etc, complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet squatting pan orrissa pattern white, of size 580x440 mmwith CI 'P' or 'S' trap, front or back inlet and foot rest, including fixing of flush pipe and provision of cement concrete bedding etc., complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1 mm thick with plugs, washers and PVC waste pipe/ coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x 460 mm and bowl size 400mm x 300mm x 180mm complete all as specified and directed.

S&F in repairs health faucet with 8 mm dia,1.2 m long Rubber flexible tube with Chromium plated spring type cover & Wall Hook for water closet complete all as specified and directed.

S&F in repairs stainless steel grating dome type 100mm dia with waste hole, complete all as specified and directed.

S&F in repairs towel rail, CP Brass 600mm long with brackets, complete all as specified and directed.

S&F in repairs CP Brass shower rose 75 mm size with or without swival joint, brass chromium plated flexible arm 450-550mm long complete all as specified and directed.

S&F in repairs PVC connection 15 mm bore with PTMT nuts of length 450 mm long complete all as specified and directed.

S&F in repairs PVC low level, push button, dual flush type flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet ball valve and handle with and including brackets and PVC bend pipe 60/90cm long etc, complete all as specified and directed.

S&F in repairs Vitreous china wash basin, oval shape, counter sunk, white, size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but inclluding vitreous china pedestal and PVC waste pipe with union, 32 mm dia complete all as specified and directed.

S&F in repairs gun metal globe or gate valves, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore complete all as specified and as directed.

S&F in repairs 75mm bore cast iron floor trap, with grating, including jointing to waste pipefifed in cement concrete in CM type B-I, 1:2:4, complete all as specified and directed.

S&F in repairs 100 mm bore cast iron floor trap, with grating, including jointing to waste pipefifed in cement concrete in CM type B-I, 1:2:4, complete all as specified and directed.

S&F in repairs 100 mm bore cast iron gully/nahani trap, with grating, including jointing to waste pipefifed in cement concrete in CM type B-I 1:2:4, complete all as specified and directed.

Taking down old/ broken cast iron pipes of 100/75 mm bore from existing lines fixed to walls with clamps or laid in trenches including fittings & necessary excavation, complete all as specified and directed.

S&F in repairs 100 mm bore sand cast iron soil waste and bend pipes in any length with or without ears with cement joints fixed on walls with clamps etc, complete all as specified and directed.

S&F in repairs 75 mm bore sand cast iron soil waste and bend pipesin any length with or without ears with cement joints fixed on walls with clamps etc, complete all as specified and directed.

S&F 100 mm bore sand cast iron bends with oval access doors and jointed with neat cement paste, complete all as specified and directed.

S&F 75 mm bore sand cast iron bends with oval access doors and jointed with neat cement paste, complete all as specified and directed.

S&F 100 mm bore sand cast iron cowls, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bend, plain with or without oval access, including jointing with solvent cement, complete all as specified and directed.

M&L for mild steel work as in stack clamps of 50mmx5mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stay to wall or roof for 100mm bore CI pipe, including prepration of new steel surfaces applying two coats of synthetic ensmel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for mild steel work as in stack clamps of 50mmx5mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stay to wall or roof for 75 mm bore CI pipe, including prepration of new steel surfaces applying two coats of synthetic ensmel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in slab supported on walls, beams, including demolation of existing concrete work etc. complete all as specified and directed.

M&L for mild steel framed work as in doors, gates, other sections with gusset plate,rails, braces etc.complete, drilled for fixing steel sheeting or other coveringsetc. to be prepared for hanging or sliding with and including either hooks or hinges or steel hanging door fittings (exclusive of steel sheeting or other coveringsrunning rails and guides) and hanging of Fe 290 Gde E-165, also fastening and fixing, including prepration of new steel surfaces applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F welded steel wire fabric complete to wood or steel members, complete all as specified and directed.

M&L for 2 mm thick fiber glass reinforced tranlucent plain sheeting fixed with couch screws and washers in roof, wall etc. complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over in reinforcement cut to length, bent to shape required incl bending spirally cranking, hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified.

M&L for form work to chajjas, landing, balcony railing and similar work, horizontal or slopping, complete all as specified.

S & F for framed work such as grills, gratings, ets.with ends of barsshouldered and or riveted,or forged into spike, framed guard bars, barred iron doors, ladders, walk ways railings, frame work of water tanks and similar work confirming to Fe-290, Gde-E165, including prepration of new steel surfaces applying two coats of synthetic ensmel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for 20 mm thick rendering in CM 1:4 plaster on fair faces of brick work with smooth finish using WPC @5% by weight of cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately as supply only.)

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in flooring, surfaces finished even and smooth without using extra cement, complete all as specified and directed.

Excavating in trenches in any type of soil, n. exc. 1.5 m wide and n. exc. 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n. exc. 10 sqm on plan and n.exc 1.5 m in depth and getting out complete all as specified and directed.

Returning filling in including spreading, leveling and well ramming, in layers not exceeding 25 cm each layer of any kind of soil complete all as specified and directed.

M&L for dry clean fine river sand as in sand cushioning to underground cable including punning down sand complete all as specified and directed. Note:- Punned thickness shall only be measured and paid.

M&L for brick protection to cable laid in trenches, with sub class B bricks using old size bricks, laid dry, flat over cable, longer length of brick laid perpendicular to the cable in trenches, complete all as specified and directed.

Supply, laying & jointing XLPE insulated armound heavy duty electric cable with aluminium counductor 1100 Volts, 25 Sqmm, 4 Core, cross sectional area, complete all as specified and directed.

Supply, laying & jointing galvanised steel tubing light grade 40 Sq mm bore for cable protection with all fitting and fixed, complete all as specified and directed.

Taking down copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, sockets, ceilling roses, holder, regulators, etc, removing materials to store for keeping in safe custody or for taking credit (Credit for above items should be made as per conditions separately) and making good surfaces, wall, floors etc.) complete all as specified and directed.

S&F in repairs, for point wiring for one light/fan/bell point controlled by one switch complete with 1.5 Sqmm multistranded FRLS PVC insulated unsheathed ,FRLS , multistranded copper conductor cable 1100 volts grade in and including non metallic rigid PVC medium duty concealed conduit with wall thickness not less than 20 mm dia including conduit accessories like bends, tees junction boxes etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sqmm single core FRLS PVC green insulated unsheathed multi stranded copper conductor 1100 Volts grade as earth continuity wire connected to earth dolly including 3 mm thick backalite sheet top cover for mounting switches, sockets and sunken steel boxes zinc oxide plated of suitable size complete all as specified and directed. Note : The unit rate quoted includes the cost of cutting chases in surfaces for conduits and fixing of sunken boxes and making good the disturbed surfaces.

All as per description of item Srl No 118 here in before but for one two way point controlled by 02 two way switches complete all as specified and directed.

All as per description of item Srl No 118 here in before but for one socket outlet 5 Amp 3/5 Pin on independent board complete all as specified and directed.

All as per description of item Srl No 118 here in before but for one 3/5 pin 5 amps socket outlet on the same board with other switches.

M&L for point wiring for one 15 Amp independant socket outlet point using 2.5 Sqmm FRLS PVC insulated unsheathed multi-strand copper conductor cable drawn in including non metalic rigid PVC concealed conduit (ISI marked) not less than 20mm dia,medium duty including sunken steel boxex of suitable size with 3mm thick plastic laminated bakelite sheet incl FRLS PVC insulated unsheathed multistranded copper conductor cable of size 2.5 Sqmm (green colour) earth wire connecting to earth dolly complete all as specified and directed. .

All as per description of serial item No 118 here in before, but for metal plug top of Geyser point using 4.0 Sqmm FRLS PVC insulated unsheathed multi-strand copper conductor cable drawn in including non metalic rigid PVC concealed conduit (ISI marked) not less than 20mm dia, incl FRLS PVC insulated unsheathed multistranded copper conductor cable of size 4.0 Sqmm (green colour) earth wire connecting to earth dolly complete all as specified and directed.

S&F Switch piano flush button single pole one way 6 Amps 240 volts with polycarbonate body complete all as specified and directed.

S&F two way switch piano, flush button, single pole two way 6 amps 240 Volt with polycarbonate body complete all as specified and directed.

S&F Bell push switch piano flush button single pole one way 6 Amps 240 volts with polycarbonate body.

S&F multi socket outlet for 2 &3 pin, 6A, flush type complete all as specified and directed.

S&F socket outlet 2 in 1, 5 pin, 6 and 16 Amps , flush type, single pole, one way, 230Volts complete all as specified and directed.

S&F switch piano, flush type, single pole, one way, 16 Amps 230Volts complete all as specified and directed.

S&F stepped type electronic mini /delux fan regulator 100 watt rotary step complete all as specified and directed.

S&F ceiling rose surface bakelite 2 to 3 terminals with polycarbonate body complete all as specified and directed. .

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fixing in repair LED lights fitting 1x 20 W, 220V, 6500K, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing in repairLED light fittings mirror type with high out put diffuser 2 feet 10 watt 220 volt AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in repair LED Bulk Head luminaries 10W complete with all accessories and including connector and connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ.

Supply and fixing in repair, building security LED light luminaire 30 W, IP 66, IK-07, AC 230 volts,made up of pressure di cast iron housing complete making connection using PVC insulated and sheathed3 core multi stranded copper conductor cable of size 0.50 Sqmm from ceiling rose including suitabe size of bracket of light grade pipe for mounting of fitting along with clamps,nut bolts and washers complete all as specified and directed.

Note for Item no 133 to 0136 :- 1. Driver should be potted anti-vibration types. 2. LM-79 and LM-80test report with lakh burning hours LED life from NABL lab shuld be provided. 3. CRI ( Colour Rendering Index) of fixture shall be >70. 4. CCT (Colour Co-related Temprature of fixture shall be 5700K + 300K). 5. System Lumen Efficiency shall be >100 Lm/W. 6. 10 KV separate surge protection shall be provided as a part of fitting. 7. Lenses shall be modular type. 8. PCB used shall be MC PCB type. 9. CA No shall be written on each fitting before installation. 10. The Name of Manufacturer to be emborssed on the fitting.

Note for Item no 133 to 136 :- Contd.. 11. The fittings shall have arrangement so that maintenance required, if any can be carried out from top cover. 12.The defect libility period of LED lights shall be 05 years from the certified date of completion and the contractor shall replace/ repair the defective fitting with in 07 days after handing over the replacement. 13. A guarantee of 05 years shall be provided by contractor, supported by OEM covered all parts of luminaire. Contractor shall deposit security on this account @ 5% of work done against these items otherwise the same shall be deducted from the dues payable to him in RAR/ Final Bill.

S&F of Bell, Ding Dong AC. 230 volts, single pole all as specified.

Supply and fixing in repair, sheet metal enclousers single pole and neutral 240 volt , 20/32 Amps with two pin and earth plug and socket plug top complete with single pole MCBs all as specified and directed.

Supply and fixing in repair Sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar of 8- way, 240 volts complete all as spd and directed.

Supply and fixing in repair MCB single pole and neutral 63 Amps, 240 volts , B-series complete all as specified and directed.

Supply and fixing in repair MCB single pole 6 to 32 Amps, 240 volts, B-series all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 600mmx600mm thickness not less than 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electric plate No 3 connected to earth test point/MCB DBs all as specified and indicated complete with funnel, charcoal, dust, salt etc and GI protection pipe, medium grade 15mm bore and GI watering pipe 20mm bore light grade, 40mm thick precast RCC M-15 (nomial mix) cover reinforced with XPM weight not less than 4 Kg/Sqm with suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover, PCC M-15 (Nominal mix) pit, excavation and earth work in any type of soil and connected, complete all as specified & directed. Note:- 1. Earth lead & protection pipes length upto & including 7.50 metre is deemed included in the unit rate quoted by the contractor. 2. Soil should be free fromstone, boulders, aggregate, gravels etc

M & L for sub main wiring with 6.0 sqmm copper conductor cable multistrand, FRLS PVC sheathed two run (as phase and neutral) and run 6.0 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in drawn in rigid non metalic PVC consealed conduit with all necessary fittings and accessories complete all as specified and directed. (Note:-The rate for concealed type point wiring shall deemed to include the cost of cutting,chasing in wall by using electric cutter and making good the disturbed surface of wall by providing cement plasterand matching the surface by white wash/colour wash all as per existing finishes complete).

S&F in repair prewired VTPN Distribution board with provision for MCCB as incommer, 4 way(for outgoing MCBs), with copper busbar for each phase, with Neutral bar, Earth bar and cable ties for cable managemet, fully insulated busbar & shrouded Neutral bars, with 63 Amps MCCB, 16 KA, 4 pole, as incomer and SP MCB's of cap 6-32amps 'B' series as outgoing complete all as specified and as directed. Note: Rate of MCCBs and MCB, cutting, chasing, grouting in wall are included in unit quoted rate.

Taking down Ceiling fan/exhaust fan, sealing cable end, dismantling blades and removing fan and blades and re fixing the same position after servicing including minor repairs by replacement of including capacitor, safety pin, cap, nuts & bolts etc and making connection using 3 core, 0.50 sq mm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose to fan, including testing to ensure efficient functioning including application of one coat of synthetic enamel paint by spray painting & rewriting number complete all as specified and directed.

Supply, fixing and testing of exhaust fans AC single phase rated voltage not more than 50W,1350rpm, with size 300 mm sweep, Double ball bearings heavy duty motor, Protective bird guard steel body with louvrs including connecting to ceiling rose and making hole in brick/stone masonary wall and provision of PCC 1:3:6 for making proper suitable size of hole to matching with size of exhaust fan for proper ventilation including MS bolts 04 Nos for fixing exhaust fan all as required and directed.

Removing excavated materials (soil) to a distance not execeeding 50m away from the starting point and dispositing where directed at a level not execeeding 1.5m above all as specified and directed.

surjit enterprises (BID ID -3114521)

Abrol construction co (BID ID -3117691)

M/S NARESH KUMAR SHARMA (BID ID -3117383)

yash paul gupta (BID ID -3117877)

WALIA ENTERPRISES (BID ID -3117799)

M/S HIMANSHU BUILDERS (BID ID -3127961)

Bidder Name

yash paul gupta

surjit enterprises

Abrol construction co

WALIA ENTERPRISES

M/S TARA CHAND CONSTRUCTION CO.

M/S NARESH KUMAR SHARMA

M/S HIMANSHU BUILDERS