PROVN OF MISC B R E M WORKS FOR INSTALLATION OF SIMPLE DRIVING SIMULATOR AT BLDG NO E2 E3 E9 and E10 PROVN OF STATION STORE NEAR BLDG NO P68 PROVN OF COVERED SHED FOR MEHAR SUBROTO and LATIF SQN PROVN OF METALIC BOARDS WITH ASSOCIATED WORKS F

Amount

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.5 m in depth for foundation etc.; or for shafts, wells, cesspits, manholes, pier holes not exceeding 10 sqm on plan and not exceeding 1.5m in depth and getting out in hard/dense soil all as specified and as directed.

M & L Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling in mass concrete all as specified and as directed.

M & L Pre-cast cement concrete 1:3:6 type C1 using 20mm graded crushed stone aggregate as in solid block masonry exceeding 10cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

M & L Cement concrete 1:2:4 type B2 using 40mm graded crushed stone aggregates as in foundation filling and mass concrete complete all as specified & directed .

M & L Damp proof course 40mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate to horizontal or vertical surface including necessary formwork complete all as specified and as directed.

M & L Plain cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in coping, holdfast fixing block, plinth course, edging of paver blocks and like including weathering slightly rounded or chamfered angles and throating including necessary use and waste of form work complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick soil complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and as directed.

Surface excavation not exceeding 30cm deep and average 15cm deep and getting out in hard/dense soil all as specified and as directed.

M & L broken stone or boulder hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified & directed

M & L Plain Cement Concrete 1:3:6 type C1 using 20mm stone aggregate as in 75mm thick plinth protection finished even and fair without using extra cement including all necessary formwork complete all as specified and directed.

M & L forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound type 'A' complete all as specified & directed

M & L Plain cement concrete 1: 4:8 type D2 using 40mm graded stone aggregate as in 100mm thick sub base of flooring complete all as specified & directed

M & L Plain cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in 75mm thick flooring finished even and fair including necessary formwork complete all as specified & directed

M & L PVC dividing strips 38mm width, 4 to 5mm thick, inserted in position conform to design complete all as specified and as directed.

M & L Rendering 15 mm thick cement mortar 1:6 on fair face of brick or concrete wall surface finished even & fair without using extra cement all as specified and directed.

M & L Rendering 15 mm thick cement mortar 1:4 on fair face of brick or concrete wall surface finished even & fair without using extra cement all as specified and directed.

M & L Preparation of new plastered wall surfaces and applying three coats of white wash complete all as specified & directed

M & L Preparation of new plastered wall surfaces and applying two coats cement based paint over a coat of chalk whitening on walls, pillasters, cornices, etc all as specified and as directed.

M & L Mild Steel work in tubular trusses, posts and supporting member for cladding including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st - 240 complete all as specified and as directed.

M & L Mild Steel plates (plain or chequred) channel, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 W (Gde-E-250) Quality - B including fixing with riveting, bolting or welding all as specified and directed.

M & L rolled mild steel as in main and cross beam, hip and jack rafters, purlins where connected to common rafters fixed with angle cleats of Fe 410-W (Gde E-250) quality-B all as specified and directed

M & L Mild steel framed work as in doors or gates of angles or other section with gusset plats, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running, rails and guiedes) and hanging; also fastening and fixing grade Fe-290 (Gde E 165) complete all as specified and directed

S & F Mild steel plain black sheet 1.25mm thick as in steel gates and similar work, cut to size, hole punched, including round headed screws, clouds nails or rivets and fixed to steel framing with plain 40 mm lap joints, riveted or welded seams, included bending complete all as specified and as directed.

M & L for Mild steel work for wind ties for roof including securing bolts including all necessary drilling, bolting or riveting etc., and similar work conforming to Fe-290 Gde E-165 etc., complete all as specified and directed.

M & L Preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

S & F Mild steel sliding door bolts 300 mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including hasp and stapple fixed to steel door with bolting or welding complete all as specified and directed.

S & F Mild steel pressed handles 150 mm size, oval type, stove enamelled black fixed to steel door complete all as specified and directed.

S & F Mild steel barrel tower bolts 200 mm long, stove enamelled black, with bright bolt and fixed to M S door with bolting or welding complete all as specified and directed.

S & F Butt hinges 125 mm size, cold rolled mild steel, heavy type and fixed to steel door and frame complete all as specified and directed.

M & L Reinforced Cement Concrete 1:2:4 (nominal mix) type B1 using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc.; and mass concrete complete all as specified and directed.

M & L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or batter for rough finished flat surfaces complete all as specified and directed.

M & L Mild steel TMT bars of 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Plain cement concrete 1:4:8 type D2 using 40mm graded crushed stone aggregate as in 75mm thick sub base to floor complete all as specified & directed

M & L Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in 50mm thick flooring complete all as specified & directed

S & F mild steel plain black sheet 1.60mm thick, cut to size, holes punched, fixed to wood or steel framing or on walls with riveted or welded or with and including 5 to 10mm dia fasternrs complete all as specified and as directed.

M & L Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridges, roof overing/cladding to wall, fixed with self tapping screws as specified

M & L for Mild steel work for hold fasts, wall ties, hooks for fire points including all necessary drilling, bolting or riveting etc., and similar work conforming to Fe-290 Gde E-165 etc., complete all as specified and directed.

M & L Preparation of new steel surfaces of small articles such as hooks and applying two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and directed.

M & L Cutting holes in brick/stone walls built in cement mortar for inserting holdfasts / hooks and makind good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required, depth of embedded portion of holdfasts or lugs exceeding half brick but not exceeding one bricks including matching the surface with existing painting complete all as specified and as directed

M & L Writing letters or figures (Block, Roman, italic or Indian) with thick paint not exceeding 30 cm high complete all as specified

S & F Acrylic sheet 3mm thick, (white colour) on MS sheet with riveting or pasting all as specified and as directed.

M & L Complete removal of existing treatment of walls and applying 1mm thick wall care putty finished to smooth surface and applying two coats of oil bound distempering over a coat of alkali resistant primer complete all as specified & directed

Supply and fix Steel ventilators with top hung shutters including hinges, handle and steel peg stay complete all as specified and directed

M & L Mild steel work as in window guard bars with steel frame with welding plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S & F Figured glass 4 mm thick pin head type and glazing with oil putty in square not exceeding 0.5 sqm in each pane all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling etc complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but not exc 4 Sqm each (without taking of shutters from the frame) complete all as specified and directed.

M & L Brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed

Taking down cement plaster on brick or stone walls, celing etc including racking out joints hacking for key, scrubbing down with water etc complete including removing rubbish off the premises complete all as specified

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper on walls over a coat of alkali-resistant priming paints over 3mm thick wall care putty all as specified & directed

M & L second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints with second classs hard wood etc., complete all as specified & directed

M & L Second class hardwood plain, framed, panelled shutters 30 mm thick (any number of panels), with panels of timber flat on both sides (feather eged), or of veneered particle board medium density, wood particle board witn commercial face veneers; supplied and fitted to chowkats complete all as specified & directed

S & F Plywood grade BWR 12mm thick, type BB, fixed with timber frame work complete all as specified

M & L Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified & directed

S & F Butt hinges medium weight cold rolled steel 100 mm size fixed to door frame complete all as specified & directed

S & F Aluminium anodised handle cast type 150 mm size all as specified & directed

S & F aluminium anodised barrel tower bolt 150 mm long all as specified & directed .

S & F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded 300 mm Aluminium alloy, anodised sliding door bolt with hasp and stapple bolt type all as specified & directed .

M & L Mild steel work in hold fast, bands, straps, supports or stays for rainwater, ventilating pipes, including bolts and similar small articles conforming to Fe-290 Gde-E-165 including necessary painting complete all as specified & directed

M & L Rolled mild steel in main or cross beam fixed with other connected plates of Fe-410-W (Gde-E-250) quality A complete alll as specified and directed

M & L Mild Steel plates (plain or chequred) channel, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 W (Gde-E-250) Quality - A including fixing with riveting, bolting or welding all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/blankets, any thickness including cover fillets and frame work complete all as specified and directed.

Supply and fixing Powder coated (not less than 50micron) aluminium snap grid frame work supported by hanger 2 to 4 mm dia G I bolt (up to length as per site requirement) adjusting level fixed to roof slab/walls/wooden/steel members by means of ceiling cleats made out of GI flat 40x3mm size 60 cm long and expansion hold fasteners 12.5mm dia 40mm long including 8-10mm thick Gypsum board in ceiling fixed with screws as per manufacturer's instruction complete all as specified and as directed.

Dismantling of stone slabs, tiles and paver blocks of any description or thickness, laid dry or laid dry and pointed in floors, aprons complete all as specified.

M & L Machine cut kota stone slab flooring 18-20mm thick over and including 20mm thick screed bed in cement mortar 1:6 and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L Sub main wiring two single core PVC insulated cables with copper conductor 1100 Volts grade, 2.5 sq mm drawn through and including suitable size of non-metallic PVC casing and capping of suitable size with necessary accessories fixed up on walls, roofs, or floors including one run of 2.5 sqmm PVC insulated cable earthing wire and connecting up complete all as specified and directed. Note:- 3 runs of 2.5 sqmm cable and one run of PVC casing & capping will be measured as one unit length.

S & F Modular switch one way 16 Amp, 01 Module complete all as specified and directed.

S&F Modular socket 6A/16A -2/3 pin combined 02 module complete all as specified and directed.

S& F modular white cover plate with frame 3 module all as specified and directed.

Supply, laying and testing of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) cross sectional area 16 Sqmm 4 core stranded aluminium conductor, 1100 Volts grade all as specified and directed.

S & F of Double Wall Corrugated HDPE Pipe, IS-16205, size inner dia 32 mm, outer dia 40 mm for cable protection fixed on wall/under gorund laying for UG cables including SNAP-FIT Coupler and all fittings as required at site complete all as specified and as directed

S & F Distribution board VTPN 4 way double door 415 Volts AC 50Hz for fixing MCCB FP as incomer and TP,SP MCBs as out going with integrated metal double door earhting system, tinned copper bus bar, neutral link, earth link complete all as specified and directed.

Supply and fixing MCB SP 6 to 32 Amps 240 volts 10 KA 50 HZ, C curve, Integrated level holder, colour coded on/off indication complete all as specified and directed.

Supply and fixing MCCB Four Pole 63 Amps, 415 volts, 10 KA 50 HZ with adjustable thermal and magnetic setting complete all as specified and directed.

M&L for Earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level, connected to galvanised iron or earth lead wire 4.0 mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including chamber in PCC 1:2:4 type B-1 with pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm

with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion all as specified and directed.

M & L Surface Point wiring with single core FRLS 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable drawn through and including PVC casing capping of suitable width complete with all accessories including Modular PVC Flush Box for fixing modular type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm. copper conductor as earth wire connected to common earth dolly and earth in distribution board for following complete all as specified and directed :- Note: Modular Cover plates will be measured and paid seperately under relavent item.

One light point controlled by one, one way switch 5 Amp complete

One 3 pin socket outlet 6 Amp independent

S & F Modular switch one way 6 amp, 01 Module complete all as specified and directed

S&F Modular socket 6A -2/3 pin combined 02 module complete all as specified and directed

S & F Ceiling rose surface backelite three terminal 240 volts complete all as specified and directed

Supply and fixing LED lights fitting 1x 20W, 220Volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

M & L Sub main wiring two single core PVC insulated cables with copper conductor 1100 Volts grade, 4 sq mm drawn through and including suitable size of non-metallic PVC rigid conduit pipe of suitable size with necessary accessories fixed up on walls, roofs, or floors including one run of 4 sqmm PVC insulated cable earthing wire and connecting up complete all as specified and directed. Note:- 3 runs of 4 sqmm cable and one run of PVC conduit will be measured as one unit length.

S & F sheet metal enclosure factory made double door for DB 240 volts with 200 Amps rated bus bar, SPN 4 Way, complete all as specified and as directed .

S & F MCB SPN, C Curve, 6-32 Amps 240 volts, 50 Hz AC supply complete all as specified & directed

M/S MAHADEV M PATIL

PURVIK CONSTRUCTIONS

ASHIRWAD ELECTRICALS

M/S. ADARSH ENTERPRISES