Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.7 LAccepted-AOC HOUSE NO 29 A SIJUBARI NIZARA PATH PO PS HATTIGAON GUWAHATI 38 | KAMRUP METRO | ASSAM | 781038 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹11.2 L+₹23,054.15 (2.10%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹12.7 L+₹1.8 L (16.0%)Rejected-Finance GOSWAMI COLONY PO UDAYAN VIHAR DISTT KAMRUP ASSAM 781171 | KAMRUP METRO | ASSAM | 781171 | L3 | Rejected-Finance Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹30,900
Closing Date
1 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE GUWAHATI
GE GUWAHATI, PO SATGAON, DISTT KAMRUP - 781027
REPAIR AND MAINT OF SEWAGE SYSTEM AND CERTAIN MISC MAINT WORKS AT CDA GUWAHATI COMPLEX AND LAO OFFICE AREA UNDER GE GUWAHATI
2022_MES_555057_1
GE/GUW/51/8260 OF 2022-23
Open Tender
Civil Works
Item Rate
150 days
GUWAHATI
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE GUWAHATI
₹30,900
Yes
29 Nov 2022
29 Sept 2022
3 Nov 2022
29 Sept 2022
1 Nov 2022
19 Oct 2022
29 Sept 2022 - 6 Oct 2022
Amount
Excavation in trenches, not exceeding 1.5 m wide and not exceeding1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed.
Removing of excavated soil to a distance not exc. 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as directed.
Materials and labour for PCC 1:3:6 Type C-2 (using 40mm graded stone aggregate) as in surface channels and drains including necessary form work complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified and as directed.
Add to or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed. Note:- Rate quoted is for adjustment of rate only for the actual size excuted at site for the item no 105 mentioned as above
Demolition and breaking up drain pipes, 150 mm bore (salt glazed stone ware, PVC, AC or reinforced concrete) set in cement mortar, complete all as directed.
Materials and labour 150mm bore pipes cement concrete bed to drain pipes with PCC(1:3:6) type C2 including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
Materials and labour for 150 mm dia (internal) salt glazed stoneware drain pipe grade 'A', laid in trenches and jointed as specified complete all as specified and directed.
Demolition of brick work or stone boulder masonary built in cement morter complete all as specified and directed.
Taking down cement plaster on brick work or concrete surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.
Materials and labour for Brick work with sub class 'B' bricks straight or curved on plan exc 6.00 m mean radius built in CM 1:6 complete as specified and directed.
Materials and labour for for PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in coping benching etc complete all as specified and as directed.
Materials and labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth (without using extra cement) complete all as specified and as directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as necessary to facilitate demolition complete all as directed.
Materials and labour precast reinforced cement concrete 1:2:4 (using 20mm graded stone aggregate) type B1 as in cover slabs and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed.
Materials and labour for TMT bars, 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally or hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified.
S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 150mm cement concrete (1:5:10) type E-2 using 40mm graded crushed stone aggregate) complete all as specified and as directed.
S&F in repair 10 ltrs capacity low level PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe complete all as specified and directed
S&F PVC grating 100mm dia fixed to floor trap doom type with grating (Minimum weight 25 gms) complete all as specified and directed.
S&F PVC (SWR) floor trap, 125/110mm dia of outlet, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F in repair UPVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints, fixed with wall complete all as specified and as directed.
S&F in repair UPVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints, laid in trenches complete all as specified and as directed.
S&F in repair 110mm dia UPVC (SWR) bends of any radius with with access door complete all as specified and as directed.
S&F in repair 110mm dia UPVC (SWR) junction single, (Single T) equal or unequal with with access door complete all as specified and as directed.
S&F in repair UPVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints, fixed with wall complete all as specified and as directed.
S&F in repair 75mm dia UPVC (SWR) bends of any radius with with access door complete all as specified and as directed.
S&F in repair 75mm dia UPVC (SWR) junction single, (Single T) equal or unequal with with access door complete all as specified and as directed.
S&F in repair 75mm dia UPVC (SWR) junction single, (Single Y) equal or unequal with with access door complete all as specified and as directed.
Cleaning of blockage of floor/nahani trap by using hand pump with rubber bucket or by cleaning rod till clear flow of water is observed all complete all as specified and as directed.
Cleaning of blockage of Indian/European type water closet by using hand pump with rubber bucket or by opening the inspection eye by using cleaning rod etc till clear flow of water is observed and finally cleaning the water closet by flush of water complete all as specified and as directed.
Taking out of sludge water and semi solid materials/sludge including other foreign materials from the manholes/septic tanks not exc. 1.5meter deep and getting out, removing & disposing off the sludges by excavating required size pit, covering the pit with earth minimum 30 cm deep, spreading bleaching powder @ 1 Kg per pit complete all as directed. Notes:- (i) Unit rate shall be deemed to be inclusive of taking down of manhole cover & re-fixing the same in position after cleaning complete. (ii) Unit rate shall also be inclusive of removing sludge from manholes and deposited in excavated pit of size as directed by Engr-in-Charge, spreading lime poser over the deposited sludge in the pit & covered with earth. Measurement for sludge shall be taken from the excavated pit after allowing initial percolation of sludge water.
Taking out of sludge water and semi solid materials/sludge including other foreign materials from the manholes/septic tanks exc 1.5 meter and not exc. 3 meter deep and getting out, removing & disposing off the sludges by excavating required size pit, covering the pit with earth minimum 30 cm deep, spreading bleaching powder @ 1 Kg per pit complete all as directed. Notes:- (i) Unit rate shall be deemed to be inclusive of taking down of manhole cover & re-fixing the same in position after cleaning complete. (ii) Unit rate shall also be inclusive of removing sludge from manholes and deposited in excavated pit of size as directed by Engr-in-Charge, spreading lime poser over the deposited sludge in the pit & covered with earth. Measurement for sludge shall be taken from the excavated pit after allowing initial percolation of sludge water.
Taking out of sludge water and semi solid materials/sludge including other foreign materials from sump at sewage pumping station depth n.exc 15m with required mechanical pump of required capacity or by manually by using rope, bucket, ladder and scaffolding etc. and getting out, removing and disposing off the sludge in to a pit of required size made by excavating , and covering the pit with earth not less than 30 cm thick, spreading bleaching powder @ 1 Kg per pit over complete all as direted at site. Notes:- (i) Unit rate shall be deemed to be inclusive of taking down of cover & re-fixing the same in position after cleaning complete. (ii) Unit rate shall also be inclusive of removing sludge from sump and deposited in excavated pit of size as directed by Engr-in-Charge, spreading lime poser over the deposited sludge in the pit & covered with earth. Measurement for sludge shall be taken from the excavated pit after allowing initial percolation of sludge water.
Removal of blockage/chock up obstructing the flow in sewage line by rodding with rods/wooden kempti/chock remover and making the continuous flow between two manholes for 150mm bore of pipe complete all as specified and directed. Note : The clear distance between two manholes shall be measured.
Removal of blockage/chock up obstructing the flow in sewage line by rodding with rods/wooden kempti/chock remover and making the continuous flow between two manholes for 200mm bore of pipe complete all as specified and directed. Note : The clear distance between two manholes shall be measured.
Removal of blockage/chock up obstructing the flow in sewage line by rodding with rods/wooden kempti/chock remover and making the continuous flow between two manholes for 100mm bore of pipe complete all as specified and directed. Note : The clear distance between two manholes shall be measured.
Dismantling floor hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises, complete all as specified and as directed.
M&L for Pre polished chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over cement screed 15 mm thick in cement mortar 1:6 complete all as specified and as directed.
M &L for Non skid ceramic coloured tiles area of each tiles (Square / rectangular) exc 0.11 sqm but n. exc 0.18 sqm 7 to 8 mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick cement screed bed in cement mortar (1:6) complete, all as specified and as directed.
M&L Glazed ceramic coloured tiles of size. 450x350x7mm thick on vertical surfaces of walls such as skirting dado etc and rendering 10mm thick screed bed in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed, .
M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
M&L for Machine pressed precast pre polished, coloured conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade set with grey cement and pigment complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames glazed with putty or fixed with beadscomplete all as specified and as directed.
S&F 4.00mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m including glazing pins/clips each pane complete all as specified and as directed.
S&F in repair 15mm bore pillar taps, cast copper alloy with capston heads, chromium plated, fancy type, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed
S&F 15mm bore bib taps, long body, cast copper alloy chromimum plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
Dismantling fencing wire mesh, any type complete all as specified and as directed.
S&F in repair mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.;including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.
Supply only chain link MS galvanized fencing of any size or type complete all as specified and as directed.
S & F mild steel screw bolts (machine made) with hexagonal head at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal nut, length of bolt exceeding 5cm and not exc 10cm long dia of neck 12mm complete all as specified and as directed.
Mild steel bars 10mm dia TMT bar cut to length, bent to shape required, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips for fencing complete all as specified and directed
M&L Mild Steel Flat Iron for securing Fencing, etc., cut to length including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.
S&F framed work such as grills, grating, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed baluster; walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.
M&L preparing new Steel surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.
M&L PCC (1:3:6) type C-2 (using 40 mm graded agreegate) as in foudation, Mass concrete for post etc and in similar works etc. complete all as specified and as directed
M&L preparation of new iron and steel surfaces of any description,n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete as specified and directed.
Taking down rolling shutter of any type including cover, anchoring rod, manual gear operated type with gear box and crank handle etc repair to defective components/replacement such as pulling system to gear system, gear box, locking plate, guide channel, bracelet plate etc, reassembling the whole rolling shutter incl greasing complete, welding, drilling where required and refixing the shutter after rectification in the same opening complete area of each shutter n exc 10 sqm complete all as directed.
Supply only lath section 1.20mm thick for shutter wide exc 3.5 m conforming to IS-6248-1979 (section of lath/profile shall have a distance of 75 mm between rolling center) complete all as specified and as directed
Supply only mild steel clip suitable for revetting to lath curtain complete all as specified and as directed
S&F Rolling shutter as specified below:- (make Dura or as approved by GE) (a) CURTAIN PANEL The curtain panel shall be made of 0.55 mm CRCA steel coated with Zink Aluminium (Galvalume) conforming to IS:277 and IS : 513, which makes it totally anti-corrosive and color bonded; which shall give the curtain a good sheen finish (Primary coat - Epoxy/Polyester primer coat 5-7 microns, Top coat - Polyster coating, 12-20 microns, Block coat-Epoxy/alkyd/Polyester coating 7-10 Microns). The coil shall be fed on the Roll forming machine to give the panels the desired profile (Box profile). Each panel will be 930 mm wide and to make the height of the door curtain, the panels shall be lock seamed with one another. Then the panels shall be cut to the width of the door. The door shall be fabricated as either forward or reverse, as specified (depending upon where the door curtain has to be fixed i.e. inside the opening or outside the opening) (b) BOTTOM RAIL Bottom rail shall be of aluminium profile lock seamed at the bottom of the door curtain along with weather seal which is made of PVC shall be inserted underneath the bottom rail which shall give an excellent weather and dust protection. The handle shall be provided at the centre to take the door up or down manually. (c) POLYGLIDE On either end of the curtain (widthwise), a Polyglide (a ribbon made of extendable rubber cladded with braided nylon) shall be stapled, to give the door curtain a free, smooth and noiseless gliding movement through the guides with a self-lubricated effect. The polyglide will also help in reinforcing and retaining of the profile of the door curtain. (d) GUIDE CHANNEL For the door curtain to move up and down, at the sides, guide chanel shall be provided on either edges of the clear opening (along widthwise). These guides shall be of GI 2.00mm thick sheet conforming to IS:513, roll formed into "U" shape channels, cut to the Height of the clear opening. At three of five points of the guides, steel flats shall be welded to help the guides to be fastened to the wall with M-8 anchor fasteners. (e) BRACKET Bracket made of MS angles conforming to IS 3909 shall be provided in the heardroom areas on either side of the clear opening to support the spindle clamp and drum assembly.
(f) SPINDLE ASSEMBLY (SPINDLE, SPRING, DRUM WHEEL) Spindle: The spindle shall be a hollow GI pipe of required diameter conforming to IS:1161, cut to the required length to hold the drum wheels, the spring and if required the drive unit also. The drum wheels shall be inserted one after the other into the spindle along with the springs. Spring: The springs shall be made of steel wire of suitable gauge confirming to Grade 2 of IS:4454 especially tensioned to international design. The spring, when properly tensioned, shall ensure correct bounce and retention of the door movement. One end of the spring shall be connected to the spindle clamp assembly while the other end shall be fastened to the drum wheels. Drum wheel : Drum Wheels on which the door curtain is wrapped shall be made of nylon-6 impregnated polymer with appropriate in destructive materials, which is totally anti corrosive: also no greasing of the drum wheels is required. The curtain shall be fastened to the Assembled Drum wheels with special Pop Rivets and Self-tapping Screws. (g) LOCK Just above the bottom rail, latch lock fitting shall be fastened either internally or externally depending upon the site condition or as directed by Engg-in -charge, lock the door using normal Pad locks.
M/S MANOJ PAUL
M.G. ENTERPRISE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .