Construction of 49 Nos of 950 Dia Tile Holes in CWMF

Amount

Conveying the surplus excavated earth & debris, boulders and spoil by mechanical means and depositing at places inside DAE installation identified as Dumping yard as per requirement with a lead specified below including loading, unloading, breaking clods, leveling all complete as per specification and as directed by the Engineer-in-Charge. Note: 1) The rates in respect of this Item are applicable for the NET Quantities arrived at after making deductions for voids @ 20% in respect of soil and @ 50% in respect of Rock from the corresponding Stack / Truck measurements. 2) The earth shall be dumped well inside the Dumping yard and not over approach pathway road. Lead charges for 1st 1 kilometer or part thereof

Supplying and filling in basement and foundation with Quarry dust, filling in layers of not more than 150mm thick, each layer well rammed and consolidated by hand/mechanical roller including watering, leveling, dressing the top surface to the required level complete all as per specification and as directed by the Engineer.

Providing and laying plain cement concrete 1:1.5:3 using 20mm maximum size graded aggregates including mechanical mixing, transporting and placing in required position, ramming, compaction, leveling, curing, shuttering, dewatering if any, complete all as per specification.

Supplying and laying water proofing treatment of Polymer modified water proofing membrane treatment for underground surfaces and basement inclusive of surface penetration, labour, tools, equipment materials etc all complete as per manufactures specification, drawing and as directed by the engineer consisting of following 1. 15mm thick leveling coarse of 1:3 cement sand mortar with approved water proofing compound over PCC. 2. First coat of acrylic based polymer modified cementacious composite mortar 3. One layer of fiber glass cloth reinforcement 4. Second coat of acrylic based polymer modified cementacious composite mortar 5. 20mm thick protective layer of 1:5 cement sand with approved water proofing compound. 6. One coat of bituminous primer 7. 4mm thick APP polymer modified bituminous membrane having minimum weight of 4.5kg/sq.m with granular surface finished on top of in single layer. 8. Third coat of acrylic based polymer modified cementacious composite mortar 9. 20mm thick protective layer of 1:3 cement sand with approved water proofing compound. Note:-Suitable Agency having past experience of executing underground such type of waterproofing works only to be engaged and guarantee of 10 years against any leaks / defects and rectification of the same has to be executed by the agency under the counter guarantee of the contractor in the standard format

Providing, straightening, decoiling wherever necessary bending, cutting, binding and fixing in position steel reinforcement TMT bars of Fe500 / Fe500D grade steel conforming to IS:1786 'SAIL or VIZAG or approved equivalent make' and tying with approved annealed binding wire of 1.6mm dia in all reinforced cement concrete work at all lifts, including cost of supplying and fixing the spacer/cover blocks in cement mortar 1:2 and binding wire complete all as per specification and as directed by Engineer-in-Charge at all lifts. Note: The rate shall be including the cost of reinforcement steel. The reinforcement steel will be procured from dealers with a test certificate as approved by the department. For further details please see Clause 11 of Section VIII, General Information for Guidance of Tenderers.

Providing and laying cast insitu controlled reinforced cement concrete of specified grade at all levels and lifts mentioned below using 20mm maximum size hard granite machine crushed graded stone aggregates including weigh batching, charges for mixing & cost of admixture, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth of all exposed faces complete for column footings, columns, lintels, sunshades, gutter slabs, beams, slabs, water tank, machine foundation and all other structural elements including dewatering wherever necessary (Formwork and reinforcement will be paid for separately) all as per specification and all as shown in drawings and as directed by the Engineer-in-charge for all in-situ item. 10a) M35 grade with 380 kg. of cement per Cu.m. of concrete for all floors

Supplying, fabricating, erecting and fixing in position at all levels, centering and shuttering to correct line and levels including strutting, propping, etc., with necessary bracings in all axes to give a stable assembly with provision for making the joints in the shuttering fully leak proof and with provision for fixing coil nuts with tie rods along with suitable channel for lateral supports and for inserts, projecting dowels, anchor bolts or any other fixture, including staging, access and working platforms etc., all complete as specified and directed including dismantling and removing the aforesaid assembly after the concrete attains the sufficient strength to self-support itself without cracking and distortion all as per specification, including all materials and labour complete in all respects at all lifts. (The measurement for the formwork will be the actual area of forms in contact with concrete surfaces.)

Providing, supplying, cutting, bending to shape, welding, fabricating, hoisting, placing and fixing in position structural steel members like MS structural embedment’s/pipe and sleeves/penetration etc. using MS angles, channels, I-sections, plates, tees, flats, rounds, square sections etc. including chamfering and rounding off the edges, applying a coat of Red lead paint primer / Zinc chromate primer of approved make and 2 coats of flat oil paint / synthetic enamel paint of approved colour and make, scaffolding and staging required for fabrication as well as erection complete all as per specifications, drawings and as directed by the Engineer-in-charge. Note: Lifting device arrangements if any required also arranged by the contractor at his own cost.

Supplying, fabricating, placing and securing in position MS Steel for lifting hook comprising of square/ round bars as per detailed drawing including cutting, bending to shape, welding, painting with two coats of synthetic enamel paint of approved colour over one coat of primer complete as per specifications and drawings

Manufacturing, supplying, hoisting and fixing in position at all lifts, precast units of various patterns and sizes for precast plain solid units, exhaust fan moulds, slabs, etc, in controlled reinforced cement concrete of M30 grade using 20mm and below machine crushed graded stone aggregate including weigh batching, mechanical mixing, casting, vibrating, finishing of exposed faces, curing, necessary formwork, moulds, transporting and placing at all lifts, preparation of connections, grouting with cement mortar/cement grout wherever needed excluding steel reinforcement complete all as per drawing, specification and as directed by Engineer. Note: 1. The rate shall be quoted on the basis of using 380 Kg. of cement per Cu.m. of concrete. Any upward/downward variation required to obtain the specified strength will be paid for or deducted at the rate specified in schedule F. 2. The rate of concrete shall include all labour, equipment, charges for mixing & cost of admixture. Chemical admixture confirming to IS:9103 shall be mixed in fresh concrete and prior permission from Engineer-in-charge shall be obtained for dosage and compatibility 3. Test certificate of cement, procured from dealer/company to be submitted for all cement related works by the Contractor.

Providing and laying plain cement concrete 1:4.5:8 using 25mm maximum size graded aggregates including mechanical mixing, transporting and placing in required position, ramming, compaction, leveling, curing, shuttering, dewatering if any, complete all as per specification for leveling courses in foundation for walls, footings, floor drains etc., encasing pipes and other required works directed by Engineer-in-Charge complete all as per specifications.

Providing and Placing in position Serrated with central bulb 225mm wide PVC water stops conforming to IS:12200 of Deep-Jyoti or equivalent for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete

Providing and constructing Random Rubble masonry in cement mortar 1:6 using hard granite stones obtained from approved quarry with bond stones at 2.00 metres apart for foundation, basement and in superstructure, compound/boundary walls, including sizing of stones if required, raking out joints, scaffolding, curing etc., complete all as per drawing, specifications and as directed by Engineer-in-charge at all lifts.

Providing Flush pointing over the random rubble masonry wall with cement mortar 1:3 at all levels including scaffolding, curing, forming grooves wherever necessary all as per specifications, drawings and as directed by Engineer-in-Charge.

Providing and constructing Brick work at all lift with well burnt stock bricks using C.M 1:6 using crushed stone sand at all level including all tools, scaffolding, racking out joints, curing complete all as per drawings, specification and as direction of Engineer-in-charge.for basement and ground floor

Providing Plastering the external surfaces of Brick work/concrete at all elevations in C.M 1:5, 15mm thick in two coats including hacking of concrete surfaces with pointed tools, scaffolding, finishing, curing, forming grooves wherever necessary complete all as per specification and direction of Engineer in charge.

Transporting, erecting, aligning and fixing in position Rail beam on EP Plate at desired location, including lifting equipment, labour all as per drawings to achieve lateral stability of rail section. Note: 1. MS rail section will be issued on free of cost at departmental stores in CWMF at Kalpakkam 2. Unit weight of rail beam may be taken as 44.64 kg/m for arriving the final cost.

Transporting, erecting MS hume pipes & MS base plates including fixing in position by aligning, plumb to verticality including cutting, grinding, leveling, welding around the pipe with base plate, applying a coat of approved primer on the plates all complete as per specifications and drawings.

Providing plastering in cement mortar 1:4, 20mm thick at all elevations with 2% of water proofing compound or as per manufacturers specification, ‘Impermo’ or approved equivalent make including hacking of concrete surfaces with pointed tool, scaffolding, finishing, curing, all as per specifications.

Providing plastering to the internal surfaces of brickwork/concrete at all elevations in cement mortar 1:5, 12mm thick finished including hacking of concrete surfaces with pointed tool, scaffolding, finishing, curing, forming grooves wherever necessary, all as per specifications.

Providing and Painting with Epoxy paint (two or more coats) using APCODUR-CF-641 finishing coat at all locations prepared and applied as per manufacturer' specifications including a priming coat if specified by the manufacturer, preparation of surface and etching with 10% commercial Hydrochloric acid wherever necessary and neutralizing the acid etched areas by washing with 5% solution of soda ash neatly and washing with sufficient water, after first coat Epoxy based trowelling compound if required, including preparation of the surface by scrapping, applying sand paper, filling the holes, joints, cracks if any, etc. complete all as per manufacturers Technical Data and as directed at site to achieve 200 micron Dry film thickness (50 Micron Primer coat and 150micron finishing Coat). (Contractor has to provide Elcometer sampling sheets etc. at his cost for testing film thickness)

Providing mechanical equipments like Hydra/JCB for cleaning garbage pit, approaching tree branches while trimming of trees above building height and plucking of tree root

DAMU CONSTRUCTIONS (BID ID -3205557)