Renovation work of Entrance Lobby at E-in-C office Irrigation Department (UPID), Lucknow.

Amount

Dismantling existing plaster including disposal of refuse as directed by the engineer-in-charge with in a distance of 60 m (200ft.) PWD SOR Ch. No. 17 S.I. No. 706

Scraping old white or colour wash ncluding disposal of refuse as directed by the engineer-in-charge with in a distances of 60 metres. (200ft). UPPWD SOR CHAPTER 17, 708

Dismantling Door & window Chowkhats with holdfast & including stacking of dismantled materials as directed by the Engineer-in-charge with in a distance of 60 metres (200ft.) PWD SOR Ch. No. 17 S.I. No. 703

Teak Wood WALL PANELLING. ( As per Analysis)

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. DSR 2018 - 26.26.2

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). UPPWD SOR CHAPTER 11, 9.1.12

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) UP PWD SOR CHAPTER 11 ITEM NO. 9.5.1.1

12 mm thick plaster 1:3 with cement & Coarse sand of 1.25 FM fair side single and half brick wall including internal rounded angles chamfers and or rounded angles not exceeding 80mm in grith and finished even and smooth. PWD SOR Ch. 15 Item No. 13.9.1

Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer’s specification as per direction of Engineer-in-Charge all complete. 26.24.1 With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles. (DSR- 26.24.1)

Providing and applying plaster of putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. PWD SOR Ch. No. 15 S.I. No. 13.80

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). PWD SOR Ch. No. 15 S.I. No. 13.47.1

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately). PWD SOR Ch. No. 21 S.I. No. 21.18

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. PWD SOR Ch. 10 Item No. 8.2.2.2

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick (DSR 11.26.1)

Electrical Works Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper Conductor cable in heavy guage rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose/ angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour wash. ELECTRICAL UPPWD SOR CH. 1 ITEM No. 131 (B)

Wiring point for two ways light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire and two numbers two ways piano type switches & ceiling rose/angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc, complete in all respect, as directed, including matching colour wash. ELECTRICAL UPPWD SOR CH. 1 ITEM No. 132 (B)

Wiring point for fan / fesh air fan (light duty exhaust fan) with 1.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc complete in all respect, including matching colour wash ELECTRICAL UPPWD SOR CH. 1 ITEM No. 133 (B)

Supply and fixing and concealing of 20 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge. ELECTRICAL UPPWD SOR CH. 1 ITEM No. 148 (A)

Supply & wiring of submains with 2 nos. 2.5 sq.mm & with 1 no. earth wire of 1.5 sq.mm FR PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, including supply of all material, labourand T&P etc. required for proper completion of the work as directed by Engineer I/C. UPPWD SOR ELECTRICAL 1307(B)

Supply and wiring of submain 2 number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. UPPWD SOR ELECTRICAL 221(C)

Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. (UP PWD SOR 2018, 1406, CAT-AA)

S/F of recess/Surface/Pendent Mounting round 10 to 15 watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/reflector and driver set complete in all respect. (UP PWD SOR 2018, 1402, CAT-AAA)

Supply and fixing of flush/surface mounting distribution boards (Legrand Lexic) without MCB with additional metal door complete in all respects.

4 Way TPN (UP PWD SOR 2018, 1026 A)

6 Way TPN (UP PWD SOR 2018, 1406 A)

Supply fixing and making connection of following MCBS complete in all respects as per direction and satisfaction of engineer-in-charge.

40 Amp. 4P MCB (10 KA) (Legrand Lexic ) (UP PWD SOR 2018, 1020)

63 Amp. 4P MCB (10 KA) (Legrand Lexic ) (UP PWD SOR 2018, 1020 A)

Supply and fixing of power plug with 20A/250 V flush type modular switch and 5 Pin 20 A/250 Volt flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T & P etc required for proper completion of work. (UP PWD SOR 2018, 1139 A)

Supply and Fixing of LED Tube light with batten suitable for up to 1x22 watt LED tube light fitting including tube on Surface complete in all respect. (UP PWD SOR 2018, 1413 CAT-AA)

Supply of Ceiling Fans with fan motor of A.C. Permanent Insulation, Capacitor rating conforming BEE 5 Star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volts, 50Hz, 1-ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system. BEE 5 Star rated-1200mm sweep.

rajendra prasad