REPAIR/REPLACEMENT OF JOINERY, STEEL WINDOW, VENTILATORS, WIRE GAUGE DOOR, SUNKEN TREATMENT AND CERTAIN CONNECTED ITEMS IN JK, CHARARI, KAJHIKHERA, SUBHASH ROAD, N-2 ROAD AND AGV AT AIR FORCE STATION CHAKERI KANPUR

Amount

Taking down chowkhat or frame n.exc 1.50 sqm with shutters (without taking of shutter from frame ) etc complete all as specified and directed.

All as per item No 2.00 above but exc 1.50 Sqm but n.exc 4.00 Sqm complete all as specified and directed.

Taking down shutter n. exc. 1.0 Sqm complete all as specified and directed.

Taking down shutter exc. 1.0 Sqm and not exc.2.0 Sqm complete all as specified and directed.

Taking down door/window frames with shutter exc 1.0 sqm and n. exc 2.00 Sqm each and re-fixing in the same opening complete all as specified and directed.

S&F plane solid straight chowkhat or frame rebated on the solid rounded or chamfered put together with glue pinned at joints in 2nd class HW complete all as specified and directed.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 100 mm size PTMT butt hinges complete all as specified & directed.

S&F Aluminium handles extruded type ,anodized of 125 mm size complete all as specified.

S&F 100 mm size butt hinges medium weight cold rolled mild steel complete all as specified & directed.

S&F Aluminium, anodized barrel tower bolt of extruded section of 150mm long complete all as specified.

S&F for factory made glazed and skelton shutters open rebated sand prepare to receive glass/gauge etc, with plain chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain chamfered or rounded, fitted without mitred beads for securing glass etc size of members of shutters as specified in SSR Part 1 Sec 8 clause 8.24 (a) of IInd class HW 35 mm thick complete all as specified & directed.

S&F for factory made glazed and Skelton shutters in window open rebated sand prepare to receive glass/gauge etc, with plain chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain chamfered or rounded, fitted without mitred beads for securing glass etc size of members of shutters as specified in SSR Part 1 Sec 8 clause 8.20 (b) of IInd class HW 30 mm thick complete all as specified & directed.

S & F 150 mm helical door spring black japan including roller and roller plate complete all as speficied & directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified & directed.

Supply & fixed in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as speficied & directed.

S & F 30 mm thick BWR flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as speficied & directed.

S&F Steel window with side hung shutters incls box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one coat shop zinc chrome primer complete all as specified.

All all as per Item No 19.00 above but without glazing bars complete all as speficied & directed.

S&F Steel ventilator with top hung shutter incls hinges steel peg stay including one coat shop zinc chrome primer complete all as specified.

S&F MS framed work such as grills, grating, guard bars, barred iron doors and similar works conforming to FE 290 Gde-165 complete all as specified and directed.

S&F 250mm long, mild steel sliding door bolt (clip type) stove enameled black with bright bolt not less than 12 mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F in repairs 250mm long, mild steel sliding door bolt (plate type) stove enameled black with bright bolt not less than 12 mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F 200 mm long mild steel barel tower bolt stove enamelled black with bright bolt and fixed, complete all as specified and directed.

S&F in repairs 200 mm long mild steel barrel tower bolt stove enameled black with bright bolt and fixed, complete all as specified and directed.

S&F 125 mm MS pressed handle oval type stove enameled black complete all as specified and directed.

S&F in repairs 125 mm MS pressed handle oval type stove enameled black complete all as specified and directed.

S&F in repair 100 mm MS pressed handle oval type stove enameled black complete all as specified and directed.

M&L for treating ends of posts, backs of chowkats etc, area tarred exc 0.1 sqm but n exc 0.5 sqm in each and treated with tar or coal tar black paints complete all as specified and directed.

S & F hand made sliding bolts, clamps, hold fasts etc and small articles conforming to fe 410 - 0 or Fe 310 -0 complete all as specified and directed.

M&L for treating the small articles such as hold fasts clamp, area tarred n exc 0.1 sqm each and treated with tar or coal tar black paints complete all as specified and directed.

S&F Plain fillets square, rectangular in section clean sawn secured with nail Second class hard wood sectional area exc 3 sqcm & n.exc 6 Sq cm as in repairs complete all as specified and directed.

S&F Plain fillets square, rectangular in section clean sawn secured with screws. Second class hard wood sectional area exc 13 & n.exc 25 Sq cm as in repairs.

S&F 75 mm size but hinges medium weight cold rolled mild steel complete all as specified & directed.

M&L two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces exc 10 cm width or girth complete all as specified.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of newly wooden surfaces of any description exc. 10cm width or girth complete all as specified and as directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in bed block for fixing of angle iron post and the similar work complete all as specified and directed by the Engr-in-charge.

Taking down cement plaster incl raking out joints, hacking for key, scrubbing down with water complete all as specified and directed .

M&L for rendering 15 mm thick CM (1:4) on fair faces of brick or concrete surfaces finished even and smooth using extra cement complete all as specified and directed.

M & L for applying three coat of white wash on newly plastered surfaces on wall incl preparation of surfaces complete all as specified and directed.

Dismantling floor, heath or wall tiling including cement mortar bedding and removing rubbish of the premises complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for non skid ceramic coloured tiles printed 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tile complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 300mmx450mmx7mm thick set and jointed in neat cement slurry over a 10 mm thick screed bed in cm 1:4 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed .(Colour,design and pattern shelled be approved by GE. Make M/S Somany Pikington Limited(Haryana)/Orient/Johnson(India) Private Limited as approved by GE.

M&L for 25mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in flooring sub base, concrete surface finished even and fair to receive screed of tiles etc, complete all as specified and directed.

M&L for 12mm thick marble work n steps ,jambs, pillars, window cills cooking platform and like in CM 1:4 including pointing in white cement using marble dust with admixture of pigment to match with shade of granite laid over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Rounding to edges of stone slabs one edge, such as in steps cooking plateform, and other similar situations complete all as specified and directed.

S&F 2nd class hard wood small fittings such as cleats and stoppers not exc. 200 cu cm each complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clip complete all as specified and directed.

Supply and fixing 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane all as specified and as directed.

Supply and fixing 4 mm thick frosted glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane all as specified and as directed.

S&F MS frame work such as iron doors incl with gusset plates, rails, braces etc and similar works conforming to FE 410 complete all as specified and directed.

Demolition of PCC in ground floor and paving n exe 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L Cement concrete 1:5:10 Type E2(using 40mm graded stone aggregate) in foundations, filling and mass concrete as in sub-bases floors and pavings finishing surfaces of concrete even and rough to receive the topping layer complete all as specified and directed.

M&L for machine pressed precast concrete interlocking rubber moulded paver block of any shape and size conforming to IS-15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment and sides lock with PCC 1:2:4 type B0 using 12.5mm graded stone aggregate complete all as specified and directed Note: Design and colour of Interlocking shall be approved by GE.

M&L for Sand filling under interlocking or in foundations including watering and consolidation complete all as specified and directed.

M/S SDS Construction Co.

Lalta Prasad vijay kumar Forwarding Agency

The Real Contractors