Construction of Mezzanine floor at New IB in NIOT campus

Amount

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Make : Tata steel / Vizag / Sail

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Make : Tata steel / Vizag / Sail

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - above plinth level up to floor five level, excluding cost of centering, shuttering, finishing andreinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. Make: Tata steel / Vizag / Sail

Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately). Make:: CR steel / HT steel / JWS / Tata / Jindal

Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183,density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.Make : JWS / Jindal / Tata sail

Providing and Drilling 30mm dia holes 400mm deep in RCC using scanner to identify the reinforcement bars including inserting 25mm dia MS holding down bolts in the drilling holes and filling the gap by injecting suitable chemical using mechanical / manual pumping etc. all complete using HILTI technology as per direction of Engineer - in -charge.(The rate inclusive all the operations excluding the cost of holding down bolts which shall be paid for separately).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. Make :Paint - Asian,Berger.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand).

Providing and fixing New Grid false ceiling in true horizontal level false ceiling as per the drawing, of approved make, using hot dipped galvanized steel section exposed surface chemically cleaned capping prefinished in baked polyester paint wall angle of size 3000mm x 19mm x 19mm used in the perphery of the ceiling fixed to the wall partition/ RC column band walls with the help of screws at 600mm C/C. Main runner of size 3000 x 15 x 32mm suspended at 1200mm C/C. by using 2mm / 3mm dia GI wire hange securely fixed to the structural soffit of RC slab/Structural steel by using 6mm anchor fastner at every 1200mm (max) a 1200mm long cross tee of size 15 x 32mm to be interlocked between in main runner at 600mm C/C (max to form a grid of 600 x 600mm. 600mm long cross tee of size 15 x 32mm fixed in between 1200mm long cross tee for forming a grid of 600 x 600mm. Finally laying 16 mm thk 600 x 600mm Wetformed mineral fiber tile with Factory applied latex paint. Fire rating of 60 minutes as per BS 476/23 of 1987, Noise Reduction Co-efficient (NRC) of 0.55, light Reflectance of > 84%, sound attenuation of 34db, Thermal conductivity K-0.052 - 0.057 W/MOK, weight of 3.53Kg/Sqm and Humidity Resistance of RH - 99%. Note: The false ceiling area will be measured in flat area only ,etc all complete as per direction of Engineer - in charge. Make :Armstrong Saint gobain / Gypcore

Providing and fixing UPVC Air Tight Door /Glazed Panel Door with UPVC Shutter styles and door frame as per site condition with necessary door running frame work in top or bottom , including all hardware fittings like locking (Mortice lock/ keys- SS Brushed finish) arrangements, 22mm dia & 300mm high SS brushed finish handles, door closer, Hinges, Tower bolts, etc. fixed to the shutters, as approved. all complete as per instruction of Engineer In-charge.(Model available at NIOT compus) Note: Fully Air tight UPVC Door in the opeation time no vibrations, shacking should be observed. The door frame should be fixied to sutiable vertical MS section of the wall panelling with sutiable screws for 6" SS heavy duty hinges.(The MS section which shall be paid for separately) Before quoting the price contractor must inspect the site condition. Make: Fenesta / LG Hausys

Providing and fixing UPVC Air Tight Sliding Windows frame/Glazed Panel window with UPVC Shutter frame as per site condition with necessary window frame in top , sides, bottom.The rate including all hardware fittings and screws glass and lock , necessary hardware fitting arrangements all etc. fixed to the shutters, as approvedall complete as per direction of Engineer - in- charge.(Model available at NIOT campus) Note: Fully Air tight Sliding UPVC windows in the opeation time no vibrations, shacking should not be obtained so providing and fixing of necessary strong all around support section must be provided as per the site condition Note:Measurement taken as per site condition only actual work done site Lenght X Height ,wastage is not considered. Before quoting the price contractor must inspect the site condition,etc all complete as per direction of Engineer - in charge. Make: Fenesta / LG Hausys

Providing and fixing Full height Gypsum partition 80mm thick Dry wall Partition Galvanized steel system components (Studs and Channels) of 4m height from level to ceiling channel of size 50x32x32 and vertical C stud support of size 48x34x36 at every 600mm c/c and horizontal supports of size 48x40 at every 450mm,900mm, 1500mm, 2100mm & roof level fixed in position (securely fixed to the structural soffit of RC slab/Structural steel sections).12mm thk gypsum board to be fixed using screws oneither side of the Wall studs using 25mm long Dry wallscrews at 300 mm C/C. The horizontal and vertical jointsof the Panel to be staggered and all joints to be taped and finished with joint Paper tape and jointing compound. The Gypsum board joints to be finished in all respects (using tape , wall putty if required). The rate should be inclusive of one coat putty,one coat of primer and 2 coat plastic emulsion paint all complete as per direction of Engineer - in- charge .Note:Necessary MS section which shall be paid separately. Providing and fixing 12mm thick BWR plywood 300mm height for electrical box fixing and finished with paint at the specific point as mentioned by Engineer In-Charge. Make : Gypsum board – Armstrong / Saint gobain / Gyproc Paint – Asian / Berger.

Providing and fixing double skin fully panelled partition using 19mm thick BWR plywood finished with 1.00 thick laminate sheet an inside and outside finished with paint (one coat putty,one coat plywood primer,2 coat of plastic emulsion paint ) for inside frame work using Horizontal and vertical of 50 x 50mm 2mm thick Aluminum section at 60cm centre to centre on both sides cover with 19mm thick BWR plywood of frame work from floor level to ceiling level finished with 1mm laminate.Colour and shade will be approved and all complete as per direction of Engineer - in- charge Make : Plywood - Green Ply / Kitply Plywood / Sharen Plywood / Century Plywood. Aluminium section : Jindal / Sapa / topaze,

Providing and laying of New Polyvinyl flooring tiles of 2mm thick of approved shade and size necessary bonding components etc (Colour and shade will be approved by Engineer In-Charge) all complete as per direction of Engineer - in- charge. MAKE : Polyvinyl flooring-Armstrong/LG/Hi Luck

Supplying and fixing of Ceramic steel Magnetic white board with Aluminium frame edges all around with grey colour corner and necessary pentray-3Nos. Magnetic duster-3Nos, Magnectic button -15Nos. The rate inclusive of transportation, loading and unloading charges etc,all complete as per direction of Engineer - in- charge

Providing and fixing pin up board made out of 9mm thick BWR ply wood backing with necessary screws, including providing pin up board at locations as directed by Engineer -in - charge using 12mm thick soft board wrapped with polypropylene cloth (basic cost of cloth at Rs.200/- per metre) with necessary steam beech beading etc,all complete as per direction of Engineer - in- charge

Providing and fixing of Cupboard using 18 mm thick BWR ply wood the cupboard depth is 500mm and finished with 3 to 4mm thick veneer sheet finish polish with necessary beading and lipping at front faces and the shutter using 5mm clear glass with magnetic lock and the storage uint shall be used ISI marked SS hinges of required size with necessary hardware fittings, handle etc,. complete as per direction of Engineer - in- charge. (colour and shade approved by Engineer -In-charge ) Storage Unit : 1.00m(L)x0.50m(D)x 0.75m(ht.) -2nos.Note: storage unit elevational area only shall be measured for payment. Before quoting the price contractor must inspect the site condition Make : Plywood - Green Ply /Kitply Plywood /Sharen. Veneer sheet: Green .Duro / century / Silicon (evoke)

Providing and fixing 12mm thick Glass Display rack for keeping the momentos with S.S. 'F' bracket and necessary handware fitting for ever 300mm interval .The glass should be I polish.The rate inclusi of materials , loading , unloading , labour charge and transportation ,etc.all complete as per direction of Engineer - in- charge. Note:Glass wide 0.30m, model available in NIOT campus. Before quoting the rate contractor must inspect the site condition.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as per direction of Engineer - in- charge.

Providing and fixing Ply wooden false ceiling using of 12mm thick BWR plywood consisting of frame work made with Aluminium section 50 mm square tube as main runner at 600 mm c/c both ways, suspended / supported from existing RCC slab or structural steel sections, including necessary supports, etc. The rate is inclusive of necessary Trap door openings with door arrangement and all hardware fittings SS handles , Lock , SS Heavey duty hinges SS Tower bolts and inner and outer finished with one coat of putty,primer,2 coat of eanemal paint (wooden false ceiling and trap door should be finished with enamel paint ) etc, all complete as per direction of Engineer in Charge. Note: Where ever Trap door area in the wooden false ceiling should be supporting with necessary frame work of size 50x50mm Aluminium Square tube supporting frame required for supporting the trap door for easy movement. The trap door should be 19mm thick BWR plywood with necessary wooden beading, before staring the wooden work and plywood, supporting frame & supporting beading should be applying anti termite treatement all complete as per instruction of Engineer In-charge.Make : Plywood - Green Ply,Kitply Plywood,Sharen Plywood,Century Plywood. Aluminium section : Jindal / Sapa / topaze, Laminate: Merino / Century / Sundesk / Sunmica

Supply and installation of L-shaped workstation of size1500 X 1500 (desk width 600mm) X 750 (ht) ,with 25mm thick laminated tabletop, with wire managementaccess to desktop (with cover). Partition panel to be 50 mm thick, 1500mm ht with tackable fabric and writing board (equal area of both) above desktop on main desk. Return desk partition shall have polycarbonate / acrylic view panel above desk only. Partition to be Laminate finished below desk on the both sides. Desktop to be supported with Metal Legs. Additional supports viz, Steel angles etc should be considered if required. Dual raceway below worktop and at skirt line (for running electrical and data cables separately ). Workstation set to include 3 Drawer mobile pedestal (laminate finished)of size 425 W x 550 D x 700 H, including lock, handles and all necessary accessories. Lowest drawer unit to be suitable for keeping files. All finishes/ shades, as approved (including metal powder coating) to be factory finished.model available in NIOT campus etc , all complete as per direction of Engineer - in- charge.Note: Before quoting the rate contractor must inspect the site condition.Warranty one year from the date of Hand over.Make : Haworth / ISpace / Trisun / Bristol

Supply and Installation of Meeting room table of 25 mm thick laminated table top with curved edges , of size 5400mm length x 1500mm wide x 750mm height .Table to be supported on sutiable MS frame work and legs with powder coating,power management through vertical riser,cable tray,popup box - 3Nos(cut open only) and fliptop etc.all complete as per direction of Engineer - in- charge.model available in NIOT campus.Note:Before quoting the rate contractor must inspect the site condition.Warranty one year from the date of Hand over. Make : Haworth / ISpace / Trisun / Bristol

Supply and installation of CABIN SET: Includes 25 mm thick laminated tabletop with main table- 1800 x 600 x 750 (ht), return table- 1400 x 450 x 750 (ht). Table to be supported on sutiable MS frame work and legs with power coating and with metal modesty panel. Power management through vertical riser, cable tray and fliptop. Includes 3 Drawer mobile pedestal (laminate finished)of size 425 W x 550 D x 700 H, including lock, handles and all necessary accessories. Lowest drawer unit to be suitable for keeping files. Storage unit: Laminate finished.Storage unit (back storage) with hinged doors, Size: 1350 mm W X 450mm D X 730 mm H, including handles, lock, and all required accessories as approved etc,all complete as per direction of Engineer - in -charge.model available in NIOT campus. Warranty one year from the date of Hand over. Make : Haworth / ISpace / Trisun / Bristol

Supply of Fluid High back Lite Chair as per features and standard specifications. The chair shall consist of Special Nylester (Polyester Mesh and Nylon Frame) back mesh and ergonomically designed and countoured flexible back frame, with optional height adjustable lumbar pad, with head rest, seat manufactured using pressed and moulded with PU foam of density 40 kg /Cum plus or minius 3kg with breatheable mesh fabric, Armrest material polypropylene, the specifications approved by NIOT,along with two way adjustable upto 100mm plus or minius 5mm height ,nylon base with five numbers of 50 mm thick twin wheel castors,along with tilting mechanism and gas lift for height adjustment. Overall width 730mm (plus or minius 10mm),backrest height 550mm (plus or minius 15mm), backrest width 440mm (plus or minius 10mm) ,seat height 440mm (plus or minius 10mm) ,seat width 480mm (plus or minius 10mm),seat depth 450mm (plus or minius 10mm) thickness of MS plate joining the under structure with seat , plywood used in seat 15mm thick (plus or minius 1mm) . The contractor shall submit one sample to NIOT which will be inspected and approved by NIOT. Based on the recommendations / modifications if any, the chair shall be manufactured and supplied. Model should be approved by Engineer in Charge. The colour of the fabric shall be decided at the time of supply. Type of chair :High back chair with Head rest. Make: Transteel / Wipro / Haworth / Trisum Model : Fluid High back Lite chair ,Warranty: two years from the date of Hand over.

Supply of Fluid Lite Chair as per features and standard specifications. The chair shall consist of Special Nylester (Polyester Mesh and Nylon Frame) back mesh and ergonomically designed and countoured flexible back frame, with optional height adjustable lumbar pad, with out head rest, seat manufactured using pressed and moulded with PU foam of density 35 kg /Cum plus or minius 3kg with breatheable mesh fabric, fixed type Armrest material polypropylene, the specifications approved by NIOT,along with two way adjustable upto 100mm plus or minius 5mm height ,nylon base with five numbers of 50 mm thick twin wheel castors,along with tilting mechanism and gas lift for height adjustment. Overall width 730mm (plus or minius 10mm),backrest height 550mm (plus or minius 15mm), backrest width 500mm (plus or minius 10mm) ,seat height 500mm (plus or minius 10mm) ,seat width 500mm (plus or minius 10mm),seat depth 450mm (plus or minius 10mm) thickness of MS plate joining the under structure with seat 0.50mm , plywood used in seat 15mm thick (plus or minius 1mm),pedestal size 580mm (plus or minius 10mm) ,polyurethane foam thickness 50mm (plus or minius 2mm),centre pivot chair mechanism 360 degree revolving type and upright locking,chair included the pneumatic height adjustments upto 100mm (plus or minius 5mm) -.The contractor shall submit one sample to NIOT which will be inspected and approved by NIOT. Based on the recommendations / modifications if any, the chair shall be manufactured and supplied. Model should be approved by Engineer in Charge. The colour of the fabric shall be decided at the time of supply. Type of chair :High back chair without Head rest. Make: Transteel / Wipro / Haworth / Trisum, Model : Fluid Lite chair ,Warranty two years from the date of Hand over.

Supply and laying of 4C x 6sqmm XLPE insulated copper armoured 1.1kV graded UG cable along the cable tray /MS stucture/above false ceiling and the job including minor welding work suitable clamp fixing & welding work as required. (Incoming cable for A/C incoming) Location: * "D" building/GF/PDB to "D" building/GF/Meeting room IP20 6way MS enclosure. * GF/IP20 MS enclosure to A/C outdoor control IP65 thermoplastic box. * "D" building/GF/PDB to "D" building/FF/IP20 6way MS enclosure. * FF/IP20 MS enclosure to A/C outdoor control IP65 thermoplastic box. Make: Polycab/RR kabel/KEI

Supply and laying of 2C x 4sqmm XLPE insulated copper armoured 1.1kV graded UG cable along the cable tray /MS stucture/above false ceiling and the job including minor welding work suitable clamp fixing & welding work as required. (Earth cable for A/C) Location: * "D" building/GF/PDB to "D" building/GF/Meeting room IP20 6way MS enclosure. * GF/IP20 MS enclosure to A/C outdoor control IP65 thermoplastic box. * "D" building/GF/PDB to "D" building/FF/IP20 6way MS enclosure. * FF/IP20 MS enclosure to A/C outdoor control IP65 thermoplastic box. Make: Polycab/RR kabel/KEI

Supply and Making of end termination with single compression gland (4C x 6sqmm) suitable crimping lugs.The gland should be double earthed by suitable copper wire and earth strip. Location: * "D" building/FF/PDB - 2nos. * GF/meeting room enclosure - 2nos. * FF/office area enclosure - 2nos * IP65 thermoplastic box - 2no. Make: Comet / Comex

Supply and Making of end termination with single compression gland (2C x 4sqmm) suitable crimping lugs.The gland should be double earthed by suitable copper wire and earth strip. Location: * "D" building/FF/PDB - 2nos. * GF/meeting room enclosure - 2nos. * FF/office area enclosure - 2nos * IP65 thermoplastic box - 2nos. Make: Comet / Comex

Supply and fixing of IP20 6way MS Enclosure with 32A FP MCB and 2nos of dummy plates. Location: * GF/meeting room - 1no. * FF/office area - 1no Make : L&T/Legrand/Hager

Supply of IP65 weather proof 6way Thermo plastic box with 25A FP MCB and 2nos of dummy plates. Location: * GF/meeting room - 1no. * FF/office area - 1no Make :- MCB -L&T/Legrand/Hager Enclosure - Hensel/Sintex

Supply and laying of 2R x 1.5sqmm and 1R x 1.5sqmm FRLS PVC insulated copper conductor graded to 1.1kV ,single core multistrand cable in existing PVC PIPE/cable manager & cassing capping of size 1" along the wall /above false ceiling as required as per site condition. Location : "D" building Make : polycab/KEI/Kundan / RR

Supply and laying of 2R x 2.5sqmm and 1R x 2.5sqmm FRLS PVC insulated copper conductor graded to 1.1kV ,single core multistrand cable in existing PVC PIPE/cable manager & cassing capping of size 1" along the wall /above false ceiling as required as per site condition. Location :"D" building Make : polycab/KEI/Kundan / RR

Supply and laying of Cat6 4pair UTP data shielded cable along the existing PVC cassing capping / conduit of size 3/4" , 1" , 1½" along the wall/surface /cable manager / above false ceiling/ inside wooden,steel,AI partitions as required as per site condition.The includes termination of one end of the cable to the RJ45 data end jack. Location :"D" building Make : Molex/Krone/Amp

Supply and laying of 2 pair PVC telephone copper not less than 0.5mm cable in existing conduit / partitions /cassing capping /cable manager as per site condition. Location :"D" building Make : Molex/Krone/Amp/Finolex

Supply and laying of 1" dia 2mm thick PVC conduit along the wall and above the false ceiling.The job includes suitable bends,JB,special clamps cable tie and accessories etc. Make : Avon plast / Bajaj plast /MODI /SUN Location :"D" building meeting room

Supply and laying of 1" MS conduit along the wall and above the false ceiling.The job includes suitable bends,JB,special clamps cable tie and accessories etc. Location :"D" building meeting room Make : Jindal/Surya/Hariom

Supply and concealing of 2" dia 2mm thick PVC conduit along the floor.The job includes suitable bends, JB,special clamps cable tie and accessories etc. Make : Avon plast / Bajaj plast /MODI /SUN Location :"D" building meeting room

Supply and concealing of 225 x 225 x 65mm height adjustable SS raceways junction box enclosure along the floor and all accessories etc. Location :"D" building meeting room Make : legrand / Hager

Supply and laying of 1" PVC hose along the false ceiling .The job includes providing of cable tie and accessories. Location :"D" building Make : MODI /SUN

Supply and laying of 1½" PVC hose along the false ceiling .The job includes providing of cable tie and accessories. Location :"D" building meeting room Make : MODI /SUN

Supply and fixing of 2module PVC surface mount box comprising of following accessories along the wall. a) 2Module plate - 1no b) 5A switch - 2nos Location:Meeting room pathway light Make : MK / Anchor roma

Supply and fixing of 2module PVC surface mount box comprising of following accessories along the wall. a) 2Module plate - 1no b) RJ45 socket with shutter - 1no c) RJ11 socket with shutter - 1no Location: * GF/Meeting room TV - 2nos. * GF/Meeting room table - 3nos. * FF/User table - 12nos. * Additional - 4nos. Make : MK / Anchor roma

Supply and fixing of 3module PVC surface mount box comprising of following accessories along the wall. a) 3Module plate - 1no b) 5A switch - 1no c) 5A socket - 1no Location: * Meeting room wall power- 8nos. * Meeting room Emergency light - 6nos. * FF/ Emergency light - 4nos. * FF/Full height partition fan-1no. Make : MK / Anchor roma

Supply and fixing of 6module PVC surface mount box comprising of following accessories along the wall. a) 6Module plate - 1no b) 15A switch - 6nos c) 15A multipin socket - 1no Location : * Meeting room TV socket - 3nos * FF/User table - 13nos. Make : MK / Anchor roma

Supply and fixing of 8module PVC surface mount box comprising of following accessories along the wall. a) 8Module plate - 1no b) 15A switch - 1nos c) 5A multipin socket - 3no d) Dummy - 1no Location :FF/User table Make : MK / Anchor roma

Supply and fixing of 8module PVC surface mount box comprising of following accessories along the wall. a) 8Module plate - 1no b) 5A switch - 8nos Location : For light control Make : MK / Anchor roma

Supply, fixing, testing and commissioning of 18W Round type recess mounted or direct ceiling mounted LED light fitting with full high quality diffuser,high quality illumination and glare free light.The job including of suitable chain supporting of light fitting as required as per site condition.Before fixing of the above item is should be approved by electrical engineer. Colour : Cool white Location: * Meeting room - 10nos. * FF/Office area - 2nos. Make:Crompton/Philips/Wipro

Supply, fixing, testing and commissioning of 5W Round type recess mounted or direct ceiling mounted LED light fitting with full high quality diffuser,high quality illumination and glare free light.The job including of suitable chain supporting of light fitting as required as per site condition.Before fixing of the above item is should be approved by electrical engineer. Colour : Warm white Location:Meeting room Make:Crompton/Philips/Wipro

Supply, fixing, testing and commissioning of 2'x2' 36w square type recess mounted LED light fitting with full high quality diffuser,high quality illumination and glare free light.The job including of suitable chain supporting of light fitting as required as per site condition.Before fixing of the above item is should be approved by electrical engineer. Location: FF/Office area Make:Crompton/Philips/Wipro

Supply, fixing, testing and commissioning of 24watts 4feet batten type LED tube light fitting. Location: Pathway. Make:Crompton/Philips/Wipro

Supply and fixing of 400mm 16" Pedestal fan with all accessories. Location :FF/Full height partition Make : CG/Orient /Usha/Almonard

Supply and fixing of 250mm to 300mm table cabin fan with all accessories. Location : * FF/Office area - 11nos. * FF/Full height partition - 1no. Make : CG/Orient /Usha/Almonard

Supply, installation, testing and commissioning of ionization type Smoke Detector dual chamber dual source with base plate as per site conditions.this detector support to existing conventional control panel. Location : * Meeting room below false ceiling - 2nos. * Meeting room Above false ceiling - 2nos. * FF/ below false ceiling - 4nos. * FF/ Above false ceiling - 4nos. Make:RAVEL /AGNI/ASES SECURITY

Supply, installation, testing and commissioning of ionization type Flame Detector dual chamber dual source with base plate as per site conditions.this detector support to existing conventional control panel. Location : * Meeting room - 1no. * First Floor - 1no. Make:RAVEL /AGNI/ASES SECURITY

Supply and laying of 2C x 1.5sqmm FRLS-H armoured cable with termination.The job included proper joint using connector as per site condition. Location :"D" building GF & FF Make : Polycab/KEI/RR kabel/RAVEL /AGNI/ASES SECURITY

Supply, installation, testing and commissioning of Emergency light with 1.5 hours for strong light, 20hours for weak light. 30piece of LED and Slide button for off and adjustable brightness to extend back up time.pull chord switch provided for easy operation with one year warranty. Location: * Meeting room - 4nos. * FF/Office area - 4nos. Make : wipro / Crompton

Supply of Caller Id 16 digit single LCD display,30 incomer and 5 outgoing memory,2way speaker,real time clock with year,date and month display land line Telephone instrument. Colour : Black. Model : M59 Location : FF/Office area Make : Beetel / Panasonic

Supply, fixing, testing and commissioning of 86" Interactive Touch panel with Android 9 quad core, 4GB/32GB,33-point Ultra fine touchscreen,4tips,4K UHD Resolution, Build-in MVBA, DM, Display & vCast, Optional OPS (80 pin), 15W x 2 + 15W x 1subwoofer, Support windows lnk, Support Palm resistant (=30mm), HDMI-out 4K, Front HDMI-in, touch USB,USB 3.0 x2, Front Type-C (PD 60W, DP1.2, Touch), 8 Array microphone, Low Blue light & Flicker-Free certified with three year warranty. Make : Viewsonic / LG

Supply, fixing, testing and commissioning of Wifi Dongle - LB-Wifi001 with one year warranty. Make : Viewsonic / New Gear

Supply and fixing of Heavy duty - Wall mount Bracket.

Supply, laying, testing and commissioning of HDMI 2.0V - 15mtrs Make : NT / Brand logic

Supply, laying, testing and commissioning of HDMI 2.0V - 10mtrs Make : NT / Brand logic

Supply, fixing, testing and commissioning of (popup box) Cable Cubby with Male to Female Cables (Slow Motion sliding Lid) - Default connectivity :2 x Universal Power socket, 2 x USB Charger, 2 x RJ45 Network, 1 x VGA, 1 x 3.5mm Audio Jack, 1 x HDMI 2.0V, 1 x USB 3.0V. Make : Logic/ NT

Supply, fixing, testing and commissioning of Logitech Wireless Keyboard Mouse with one year warranty. Make : Dell/ HP

Supply, laying, testing and commissioning of USB - Type C - A cable - 10mtrs Make : NT / Brand logic

Supply, fixing, testing and commissioning of USB -All-in-one 4K Video Confrence control, 4K 5x EPTZ auto-track 120-deg FOV Cam, Codec, Stereo Speaker phone,Wall Mount;NTSC/PAL;Pwr:India BIS.with one year warranty. Make : Poly Studio / Logitech

Supply, fixing, testing and commissioning of Extension Microphone for Poly Studio with one year warranty. Make : Poly Studio / Logitech

Supply, fixing, testing and commissioning of 5.5TR Ductable AC Unit with complete set of indoor and outdoor unit with chord(or)chordless remote. The job includes complete control wiring of indoor to outdoor unit, providing and laying of suitable copper refrigerant pipes between indoor, outdoor as required at site, providing of damper if required, any alternation and addition in ducting with insulation to fit the indoor unit to existing ducting system by providing canvas and ducts of suitable sizes, gas charging, pressure testing etc. The minor civil works such as chipping, chasing, plastering, painting the plastered area to make the wall good for appearance. The A/C unit should have the following protection against phase failure, phase reversal, over load, over temperature, LP & HP and indication for trip using micrprocessor based control system equipped in sutiable control panel. The outdoor and indoor unit should be properly fixed with fasteners. The outdoor unit should be placed using proper mansonary chamber (or) cement concrete or brick pedestal with vibration pads. The job also includes removing of existing indoor / outdoor units which need to be handed over to NIOT. The refrigerant used shall be R-410a/R32 and the compressor shall be of scroll type. Make :- A/C Unit - Carrier /Daikin/ Blue star

Supply, fixing, testing and commissioning of 8.5TR Ductable AC Unit with complete set of indoor and outdoor unit with chord(or)chordless remote. The job includes complete control wiring of indoor to outdoor unit, providing and laying of suitable copper refrigerant pipes between indoor, outdoor as required at site, providing of damper if required, any alternation and addition in ducting with insulation to fit the indoor unit to existing ducting system by providing canvas and ducts of suitable sizes, gas charging, pressure testing etc. The minor civil works such as chipping, chasing, plastering, painting the plastered area to make the wall good for appearance. The A/C unit should have the following protection against phase failure, phase reversal, over load, over temperature, LP & HP and indication for trip using micrprocessor based control system equipped in sutiable control panel. The outdoor and indoor unit should be properly fixed with fasteners. The outdoor unit should be placed using proper mansonary chamber (or) cement concrete or brick pedestal with vibration pads. The job also includes removing of existing indoor / outdoor units which need to be handed over to NIOT. The refrigerant used shall be R-410a/R32 and the compressor shall be of scroll type. Make :- A/C Unit - Carrier /Daikin/ Blue star

Supply, Installation and Testing of 5.5TR Ductable AC Unit both sucation and delivery copper Refrigerant piping, fittings with suitable thick tubular nitrile rubber insulation and finished with poly shield coating for following AC unit . Complete piping workmanship to be carried out as per recommended practice. The piping to be vacuum tested and leak tested. Scope includes all refrigerant pipes shall be properly supported and anchored to the building structure using steel hangers, anchors, brackets and supports etc which shall be fixed to the building structure by means of inserts or expansion shields of adequate size and number .

Supply, Installation and Testing of 8.5TR Ductable AC Unit both sucation and delivery copper Refrigerant piping, fittings with suitable thick tubular nitrile rubber insulation and finished with poly shield coating for following AC unit . Complete piping workmanship to be carried out as per recommended practice. The piping to be vacuum tested and leak tested. Scope includes all refrigerant pipes shall be properly supported and anchored to the building structure using steel hangers, anchors, brackets and supports etc which shall be fixed to the building structure by means of inserts or expansion shields of adequate size and number .

Supply and installation of communication cable carried out with 4 core x 2.5 sq.mm shielded cable including PVC conduit, between indoor unit to outdoor unit with clamping and complete fixing accessroies. Make: Polycab/KEI/RR kabel

Supply, installation, Testing and commissioning of UPVC heavy class drain piping insulated out of 25 mm dia 6mm thick class O closed cell elastomeric nitrile rubber material of approved make as per specification complete with supports, consumbles, fittings, pipe sleeves, U trap. a) 25mm Make: Finolex / Trubore/ Prince/ Ashirva

GSS RECTANGULAR DUCTING : Supply, Installation, Testing & Balancing of 24 G Rectangular Galvanized Steel Sheet Ducting made of Lock-forming quality GSS Class VIII ; complying with IS: 277 and having 120 GSM coating classification with GI full threaded rods and GI slotted channel support /hangers with bolts, nuts neoprene fire retardant gaskets and sealed with RTV / silicon sealant, elbows, turning vanes, slip on flanges, in accordance as per site conditions. The job includes specifically matching the existing duct to additional length / closing the existing duct / alteration in existing duct.

GSS RECTANGULAR DUCTING : Supply, Installation, Testing & Balancing of 22 G Rectangular Galvanized Steel Sheet Ducting made of Lock-forming quality GSS Class VIII ; complying with IS: 277 and having 120 GSM coating classification with GI full threaded rods and GI slotted channel support /hangers with bolts, nuts neoprene fire retardant gaskets and sealed with RTV / silicon sealant, elbows, turning vanes, slip on flanges, in accordance as per site conditions. The job includes specifically matching the existing duct to additional length / closing the existing duct / alteration in existing duct.

Supply of 10mm thick class-O Acoustic insalation for initel portion GI ducts

Supply, Installation and Testing of following Round flexible Duct with necessary clamps complete all. The job includes creating additional provision in existing duct of extension duct which need to be incoherence to fix the diffuse Ø 150 mm

Supply and fixing Air Diffuser, ceiling mounted, in anodised aluminium construction and powder coated to RAL9010 or other finish as per Architect's choice of colour, 4‐way square pattern, c/w opposed blade volume control damper, as for site conditions

Supply and fixing Return Air Diffuser, ceiling mounted, in anodised aluminium construction and powder coated to RAL9010 or other finish as per Architect's choice of colour, 4‐way square pattern, w/o volume control damper, as per drawings & schedules

TOTAL WITHOUT GST

GST 18% SL no. 1 to 77 and 80 to 89

GST 28% SL no. 78 and 79