CONSTRUCTION OF 06 NOS OF TRANSIT ACCOMMODATION FOR OFFICERS AT INS CHILKA

Amount

Surface dressing not exceeding 15 cm deep in soft/loose soil complete all as specified and as directed.

Cleaning of grass,vegetation,sapling shurbs,bush wood under growth and tree not exceeding 30cm girth(measured 1m above ground level) and removing rubbish upto a distance of 50 m and depositing where directed complete all as specified and as directed.

Removing excavating surplus soil, exceeding 200 M but not exceeing 250 M and depositing where directed at a level not exceeding 1.50 M above the starting point complete all as specified and as directed.

Excavating in trenches not exceeding 1.50 M wide and not exceeding 1.50 M in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed.

Excavation over areas not exceeding 1.5 M deep and getting out in soft /loose soil complete all as specified and as directed.

Excavation over areas exceeding 1.5 M but not exceeding 3 M deep and getting out in soft /loose soil complete all as specified and as directed.

M&L cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations,filling and mass concrete complete all as specified and as directed.

M&L reinforced cement concrete , M-30 (Design Mix) using 20mm graded stone aggregate as in foundations, including rafts, footing foundation beams plinth beams ; bases for coumns etc basement slabs and mass concrete complete all as specified and as directed.

M&L for reinforced cement concrete , M-30 (Design Mix) using 20mm graded stone aggregate as columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L reinforced cement concrete , M-30 (Design Mix) using 20 mm graded stone aggregates as in beams, cantilevers, bressummers, lintels over 1.5 M span complete all as specified and as directed.

M&L reinforced cement concrete , M-30 (Design Mix) using 20 mm graded stone aggregates as in slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L reinforced cement concrete , M-30 (Design Mix) using 20 mm graded stone aggregates as in wall, retaining wall,basement walls,ballast wall and like, any thickness above top of footings complete all as specified and as directed.

M&L reinforced cement concrete , M-30 (Design Mix) using 20 mm graded stone aggregates as in chajjas complete all as specified and as directed.

M&L Mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column hooking end and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

M&L Mild steel TMT bar 5mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders cut to length bent to shape required including cranking bending spirally for hooping for column hooking end and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

M&L Mild steel TMT bar 6 to 8 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column hooking end and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plain exceeding 6m means radius built in cement mortar 1:6 complete all as specified and as directed.

M&L brickwork with fly ash bricks, straight or curved on plan to any radius as in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

M&L 15 mm thick rendering on brickwork or concrete surfaces of wall in cement mortar 1:4 mixed with water proofing compound @ 3% by weight of cement , surface finished even and fair complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid seperately.

M&L 15 mm thick rendering on brick or stone masonry or concrete surfaces of wall in cement mortar 1:6, surface finished even and fair complete all as specified and as directed.

Use and waste of formwork to sides of pillars , posts, struts, piers, columns and stanchions of square, rectangular or polygonal, rough finished surface of concrete complete all as specified and as directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft beams, sides and soffits ( if any) of foundation and plinth beams and similar works vertical or to batter of flat, rough finished surface of concrete complete all as specified and as directed.

Use and waste of formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc of flat, rough finished surface of concrete complete all as specified and as directed.

Use and waste of formwork to faces of wall, retaining wall ,abutments,parapet wall and similar other works vertical or to batter, rough finished surface of concrete complete all as specified and as directed.

Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edge of flat ,rough finished surface of concrete complete all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick of flat, rough finished surface of concrete complete all as specified and as directed.

M&L 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floor,paving etc complete all as specified and as directed.

M&L 25 mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in floor, roof padding and similar other work complete all as specified and as directed.

M&Lvetrified tiles coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.36 Sqm but not exceeding 0.72 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350mmx250mm or 450mmx350mmx 6 to 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&l water proofing treatment to roof as per per manufacturer's instructions with the following specification:-. (a) 15 mm thick plastering in cement mortar 1:4 mixed with and including water proofing compound @3% by weight of cement including preperation of roof surfaces. (b) Applying evenly a coat of bitumineous primer @ 0.5 litre per Sqm (c) Applying evenly a coat of hot blow bitumen 85/25 grade @ 1.2 Kg per Sqm (d) Applying APP based polymeric membrane minimum 3 mm thick and minimum weighing 3kg/sqm laid on primed surface by LPG forced torch application with a side & end overlaps of minimum 100 mm. (e) Applying evenly a coat of hot blown bitumen 85/ 25 grade @ 1.2 Kg per Sqm over water proofing membrane (f) Applying a coat of bituminous based aluminium primer @ 100 gm/Sqm on top including sealing all joints by thermo fusion complete all as per manufacturer's instructions (g) Testing for water tightness by water ponding at least 72 hours

M&L 5 mm thick rendering in cement mortar 1:3 on ceiling , surface finished even and fair complete all as specified and as directed.

M&L for applying two coats of weather proof acrylic emulsion (Anti dust) paint exterior grade (100% acrylic) over a coat of primer on newly plastered surfaces of walls of any description over 10 cm width or girth etc complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer including preperation of newly plastered surface of wall complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer including preperation of newly plastered surface of ceiling complete all as specified and as directed.

M&L 75 mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection,laid in alternate panel including necessary use and waste of form work as requieed, surface finished even and fair complete all as specified and as directed.

M&L for broken stone hardcore of gauge not exceeding 63 mm , deposited , spread, leveled in layers not exceeding 15cm thick watered and rammed to a true surface complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet reinforced with M.S Square tube, in opening as per specification & drawing complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick style considering of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded both side Prelam PVC sheet used PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification and as shown on drawing complete all as specified and as directed.

S&F 125 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 125 mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed.

S&F 250 mm long, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section including fixing blots and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F Vitreous china wash down water closet pan (Pedestal pattern) ,white including fixing bolts (excluding flushing cistern & Pipe) including necessary connection to trap and flushing pipe complete all as specified and as directed.

S&F Vitreous china wash hand basin, white, flat back of size 580mm X 450mm with brackets, complete including 15 mm bore chromium plated pillar tap complete all as specified and as directed.

S&F PVC low level flushing cistern of 10 litre capacity fixed including syphonic action type,ball valve, float and handle including brackets etc complete all as specified and as directed.

S&F 15mm bore dia, Bib taps chromium plated , fancy type screwed down for iron pipe and fixed complete all as specified and directed. .

S&F PVC connections 15mm size with PTMT nuts and washers of length 600mm complete all as specified and as directed.

S&F 15 mm dia chromium plated angle stop valve, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all specified and as directed.

S&F 16 mm outer diameter of UPVC pipe concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

S&F 20 mm outer diameter of UPVC pipe concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

S&F 25 mm outer diameter ofUPVC pipe concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including provision of inlet, outlet, overflow and wash out connections complete all as specified and as directed.

S&F 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight -455 gram) complete all as specified and as directed.

M&L for 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all specified and as directed.

S&F 32 mm dia size PVC waste pipe with cup washer complete all as specified and as directed.

S&F 75 mm diameter of outlet PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and as directed.

S&F grating doom 100 mm dia of PTMT (minimum weight 25 gms) complete all as specified and as directed.

S&F PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to walls complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to walls complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bend complete all as specified & directed.

S&F 110 mm bore PVC (SWR) bend complete all as specified & directed.

S&F 110mm bore PVC (SWR) branch piece, double (double Y) equal or unequal with access door complete all as specified and as directed.

S&F 110mm bore PVC (SWR) junction,single (Single T) equal or unequal complete all as specified and as directed.

S&F 110mm PVC (SWR) WC connector bent type complete all as specified and as directed.

S&F 110mm PVC vent cowl. complete all as specified and directed.

S&F Brass chromium plated tubular towel rail, 20mm dia , D type, 600mm long complete all as specified and directed.

M&L cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in coping to manholes or to boundary wall, cills and other similar bands etc including necessary use and waste of form works as required complete all as specified and as directed.

M&L Moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed.

Supply only Integral water proofing compound complete all as specified and as directed.

S&F plastic water closet seat (EWC), white, closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and as directed.

S&F PVC soap tray fixed with screw complete all as specified and as directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixing in position complete all as specified and as directed.

S&F 25 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

M&L for 40 mm thick cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor, roof padding etc complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F anodised powder coated of any colour (thickness of powder coating not less than 50 micron) aluminium window/ventilator shutters, side hung type without sash bars , aluminium sections minimum weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber paking , anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150 mm long (1 No) in skelton shutter, stainless steel butt hinges type B-21 75 mm long (02 Nos) ,friction hinges 300mm (01 pair) in glazed shutter suitable handle 1No and 100 mm size powder coated aluminium tower bolt (02 Nos) with aluminium flat and screws complete all as specified and directed

Supply only 4.8 mm thick frosted sheet glass ,ordinary quality, in square not exceeding 0.5 Sqm each pane fixed to aluminium joinery complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and fixed to aluminium joinery complete all as specified and as directed.

M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface( area of substructure in contact with the backfill to be measured) complete all as specified and directed.

M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface, complete all as specified and as directed.

M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M&L for treating the soil along with external perimeter of building at the rate of 2.25 litres of emulsion per metre of perimeter wall complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps ,cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10cm girth of solid PCC wall complete all as specified and as directed.

M&L cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundations,filling and mass concrete complete all as specified and as directed.

S&F Wall mixture with hand shower fixed to plugs including 60mm long brass screws, pointing around back in cement complete all as specified and as directed.

S&F liquid dispenser complete all specified and as directed.

S&F PAPER HOLDER complete all specified and as directed.

M&L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in bed to 150 mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

M&L for reinforced concrete pipes class NP-3, laid and jointed complete with collar of 150 mm dia complete all as specified and as directed.

M&L 20 mm thick rendering on brickwork or concrete surfaces of wall in cement mortar 1:4 in two layer ( Each layer 10 mm thick) mixed with water proofing compound @ 3% by weight of cement , surface finished even and fair complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid seperately.

M&L cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in benching of manholes including necessary use and waste of formworks as required complete all as specified and as directed.

M&L precast cement concrete 1:2:4 type B-1using 20mm graded stone aggregate as in cover slab for manholes, set in cement mortar 1:6 complete all as specified and as directed.

M&L for finishing cement concrete surface even and smooth with using extra cement complete all as specified and as directed.

M&L mild steel work as in band,strap, support or stay for rainwater, ventilating pipe,heavy bracket and similar other works complete all as specified and as directed.

S & F Vertical distribution board,double door type, 4 way,with provision of mount MCCB 3P upto 125 Amps as incomer and MCB SP as outgoing,415 V with 200 Amps rated bus bar complete all as specified and directed by Eng-in-charge. Note: MCCBs/MCBs shall be measured and paid separately.

S&F Co-axial TV cable PVC insulated,soild annealed bare copper conductor polythene insulated shielded with polyester backed aluminium tape and additional shielded with fine aluminium braid protected with polyester tape wrapping and sheathed with PVC,RG-6 foam with nominal dia of conductor 1.02 mm suitable for TV connection drawn through conduit complete all as directed.

S&F Ceiling fan 1200mm sweep energy saving model BEE 5 star rating with all fittings complete all as specified.

M&L for Circuit/sub main wiring along with earth wireconcealed with two runs of 6 sq. mm multistranded copper conductor cable FRLS grade 1100 volt and one run of 6 Sq.mm multistranded copper conductor cable FRLSH grade 1100 volt drawn through and including PVC rigid conduit heavy grade 25 mm dia from main TPN DB to SPN DB complete all as specified.

S&F PVC insulated overall FRPVC/FRLSH sheathed,tinned copper conductor cable of size 0.50 sqmm suitable for telephone connection 2P/4P as per TEC specification No.G/WIR-06/02 with accessories complete drawn through conduit as directed.

M&L for point wiring with 1.5 sqmm PVC FRLS insulated unsheathed multistranded copper cable with 1.5 sqmm PVC FRLS insulated multistranded copper cable as earth continuity drawn in including concealed PVC conduit not less than 20mm dia with pressed mild steel concealed box made out of 1.6 mm thick sheet covered with 3mm thick laminated sheets for mounting switches/sockets etc and other accessories such as spacers, saddles, junction boxes for one light / fan point / bell point/5 amp socket controlled by one switch complete all as specified and as directed.

S&F switch piano,modular flush type, single pole, one way, 5/6 Amp, complete all as specified and as directed.

S&F ceiling rose, surface bakelite 65mm x 30mm, three terminals over and including PVC box of size 3"x3" round type complete all as specified and as directed.

S&F 1X18 Watt tube light fittings with lamp Endura linear LED wall mounted LED batten, extruded aluminium heat shrink provided for efficient heat dissipation and intergrated electronic driver complete with LED retrofit T8 polycarbonate tube of capacity 18 Watt with decorative holder including connection with three core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and as directed.

S&F LED street light 25W, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compartment with IP 66 protection and impact resistance of IK07 and 32 mm dia galvanised iron pipe light grade bracket having 1.5 m length with suitable clamp with nuts and bolts for fixing complete all as specified and as directed .

S&F non metallic ventilating fan,200 mm sweep, 900 RPM, AC single phase,230 V including louvers and necessary connection with multistanded copper conductor flexible copper wire of suitable size from ceiling rose to connector of fan and necessary fixing arrangement ie anchor bolts,nuts, washers and making good to the disturbed surfaces to match with the existing complete all as specified and as directed .

S&F 9 Watt tube light fitting with lamp, Endura linear LED, wall mounted batten with polycarbonate housing and intigrated driver for efficient heat dissipation having THD<20% with complete including connection with two core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and as directed.

S&F of Factory made sheet metal enclosure for DBs double door SPN, 240 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed.

S&F MCB 6 to 32 Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F MCB 40 Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series, complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 M deep below ground level ) with top edge of the plate not less than 1.5 M below normal ground level, connected to galvanised earth lead wire 4.0 mm dia upto 7.5 M in length from earth plate by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-2009, connected to earthing with DBs all as specified including excavation and earth work in any type of soil, PCC 1:3:6 type C-1 using 20mm graded stone aggregate in chamber and 40mm thick RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab, reinforced, with 8mm dia TMT bar at 150mm c/c both ways, 15mm dia GI pipe light grade for earth lead protection, 20mm dia GI medium grade pipe for watering , funnel etc complete all as specified and testing on completion.

M&L for cutting existing road for taking out or laying of underground cable including necessary excavation and earth work and making good by filling earth and 150 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate at top layer complete all as specified and as directed.

M&L for natural river sand as cushioning of cables including spreading and punning down complete all as specified and as directed. Note : Punned thickness shall be measured for payment purpose

Supply and laying fly ash brick of size 200mmx100mmx80mm locallly available as in protection of cable in trenches complete all as specified and as directed.

Supply, laying, jointing and testing XLPE Cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 32 sqmm 4 core including necessary cable lugs, glands etc complete all as specified and as directed. Make:- Finolex/ Gloster/ Polycab

M&L for 40 mm dia galvanised iron pipe light grade including necessary fittings for cable protection and sealing both end after laying of cable complete all as specified and as directed.

S&F 20 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow. reducer, socket etc laid in trenches or laid in floor complete all as specified and as directed.

S&F 20 mm dia gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Cutting and screwing existing steel tubing 20 mm bore for insertion of new tee of 20 mm dia for branch connection complete all as specified and directed.

M&L for point wiring with PVC FRLS insulated unsheathed multi stranded copper conductor cable of size 4 sqmm drawn in including concealed PVC conduit not less than 20mm dia with pressed mild steel concealed box made out of 1.6 mm thick sheet covered with 3mm thick laminated sheets for mounting switches/sockets etc and other accessories such as spacers, saddles, junction boxes etc including 2.5 sqmm copper conductor PVC FRLS cable for earth continuity conductor of green colour for 15 Amps socket outlet complete all as specified and as directed.

S&F switch socket combination 2 in 1 type, 3 pin 5 / 15 Amp, 230 volt, multipurpose, complete all as specified and as directed.

S&F 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and as directed.

S&F 2nd class hard wood , 35 mm thickness of plain, framed, panelled shutters (BOTH SIDE PRE LAM), with panels of timber flat on both sides (feather edged), or of veeneered particle board medium density, wood particle board with commercial face veeners; supplied and fitted to chowkats all as specified and as directed

S&F 2nd class hard wood, 35 mm thick Glazed & Skeleton shutters, open reated & prepared to receive glass, guage etc. divided into squares with plain chamfered mitered and rebated sash bars any numbers, edges of fraing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc., sizes of members of shutters as specified and as directed

Mahalaxmi Traders (BID ID -3015418)

RCB CONSTRUCTION (BID ID -3016539)