SPL REPAIR TO BLDG NO P-6, T-11, TNC-12, T-15, TNC-15 (DINING HALL SIG COY), T-16, T-18, T-21, T-111 (OFFR LIVING) AND T-302 (ATT LINE) IN THE AOR OF AGE B/R-III UNDER GE 969 EWS

Amount

Dismantling of plain/corrugated steel sheeting, any gauge or thickness including Nainital or similar pattern roof covering complete all as specified and directed.

M&L for pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floor etc, over and including screed bed of 15 mm thick in CM 1:6 complete all as specified and directed.

All as per item No 05 here-in-before but as in skirting over and including 10mm thick in CM 1:4 as in backing coat complete all as specified and directed.

M&L for machine pressed chequered cement concrete tiles 20cmx20cm and 22-25mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments in floors over and including screed bed of 15mm thick in CM 1:4 complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in floors etc complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness laid dry or laid dry and pointed in any mortar in floors, aprons etc complete all as specified and directed.

Demolition of PCC in ground floor and pavings n. exc 15 cm thick below or above ground level complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6, type C-2 (using 20 mm graded stone aggregate) as in path/pavings/ floor/plinth protection etc laid in bays including finishing the concrete surface even and smooth without using extra cement complete all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, cover fillets etc. complete all as specified and directed.

M&L 4mm thick pine wood veneered decorative, plywood grade 1 (BWR resin) with decorative face veneers on one faces, fixed with nails to timber frame work on ceiling complete all as specified and directed.

M&L for 4 mm thick pine wood veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work on wall complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section in any position in unframed work complete all as specified and directed.

M&L for second class soft wood (Kail) clean swan timber fixed in scantling complete all as specified and directed.

All as per Ser item No 16 here-in-before but except timber complete all as specified and directed. Note : Serviceable timber obtained from ser item No 15 above to be used.

Dismantling of timber fillets rails, posts rafter purlins etc under 40 Sqcm in section in any position in framed work complete all as specified and directed.

S&F second class softwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm complete all as specified and directed.

S&F second class softwood plain fillets square, rectangular in section not exc 3 Sqcm complete all as specified and directed.

M&L for 18/19mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work complete all as specified and directed.

M&L for 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F 40mm dia cup board knobs fixed with nut and washers of mild steel bright finish complete all as specified and directed.

S&F mortise lock vertical type mild steel 4 lever 100 mm fixed in repair complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed.

Dismantling of boarding any description fixed in any position with nails complete all as specified and directed.

M&L, for weather boarding of 2nd class softwood, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps complete all as specified and directed.

Fixing only for weather boarding of 2nd class softwood, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps complete all as specified and directed. Note: Serviceable boarding retrived from item No 26 shall be reused.

S&F facia boarding of 2nd class soft wood planed one side with but joints 20mm thick and champhered one side and the boarding is matched complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) n. exc 1.5 sqm complete all as specified and directed.

S&F 2nd class hard wood plain solid, straight chowkhats and frame wrought, framed rebated on solid, rounded or chamfered, put together with pinned at joints complete all as specified and directed.

S&F 35 mm thick, 2nd class hardwood, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides; supplied and fitted to chowkhats, complete all as specified and directed.

S&F 2nd class hard wood 30 mm thick glazed skeleton shutters open rebated and prepared to receive gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkhats complete all as specified and directed.

S&F partition wall of powder coated aluminium hollow sections members of size 63.50 mm x38mmx 1.48 mm thick with distance of vertical hollow section, 1.2mtr to 1.8 mtr height of wall having top rails, bottom rails and middle rail of size 63.50 mm x38mm x 1.48 mm and upto middle rail wall panels shall be covered by 5 mm thick aluminium composite panel LDPE core PET coating (both side decorative type) with aluminium clip height of middle rail shall be 1 meter from floor and remaining portion above middle rail shall be provided with 5 mm thick glass including eaching approved designed with aluminium strips/beadings with rubber gasket as per existing or as provided complete all as specified and directed.

S&F MS cold rolled butt hinges medium weight 100 mm long complete all as specified.

S&F MS cold rolled butt hinges medium weight 75 mm long complete all as specified.

S&F 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy all as specified and directed.

S&F 150mm long anodised aluminium tower bolt complete all as specified.

S&F 100mm long anodised aluminium tower bolt complete all as specified.

S&F 150mm long extruded aluminium alloy handle complete all as specified and directed.

S&F 100mm long extruded aluminium alloy handle complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.46 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

S&F sheet glass ordinary quality & glazing with oil putty in square n-exc. 0.5 sqm in each pane 4mm thick complete all as specified & directed.

Demolition of brick work or stone / boulder masonry built in CM including all quoins arches, pillars complete all as specified.

M&L for walling or random rubble, uncoursed well bounded bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed by Engineer-In-Charge.

M&L cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in copping, benching etc complete all as specified and directed .

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials where directed at low lying areas in defence land complete all as specified and directed.

M&L rendering 15 mm thick on stone walling surfaces finished even and smooth with using extra cement in cement mortar 1:4 complete all as specified and directed.

M&L preparation of new plastered or unflustered surfaces of walls and applying two coats of cement based paint, and removal of rubbish off the premises upto a distance not exceeding 50metres, complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old/ new surfaces complete all as specified and directed.

S&F in repairs MS decorative curtain rod 20 mm dia covered with coloured PVC layer with decorative ends including PVC Knobs and MS Bracket both ends complete all as specified and directed.

M&L brickwork with subclass `B` straight or curved on plan n.exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L formwork to sides and soffits of floor or roof beams, lintels, cantilevers, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-310-0 or Fe-410-0 all as specified and directed incl drilling to cement concrete surface for fixing of reinforcement in position all as specified.

M&L 8mm dia TMT bar cut to length bend to shap required for stirrups including cranking, hooking and binding with steel wire complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of old bound distemper ,white or tinted ,over a coat of chalk whitening, complete all as specified and directed

S&F for steel work in tubular trusses, as in gate ,post , including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.

M&L for preparation of new steel surface , not otherwise described over 10 cm width or girth two coat of synthetic enamel paint over a coat of of red oxide including complete all as specified.

S&F 2nd class hard wood 35 mm thick glazed skeleton shutters open rebated and prepared to receive gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkhats complete all as specified and directed.

S&F butt hinges medium weight cold rolled mild steel 100mm long complete all as specified and directed.

S&F butt hinges medium weight cold rolled mild steel 75mm long complete all as specified and directed.

S&F aluminium handle cast type anodised 150mm long complete all as specified and directed.

S&F aluminium handle cast type anodised 100mm long complete all as specified and directed.

M&L for coloured glazed designer ceramic tiles 300mm x 450mm and 7 to 8mm thick on vertical surface as in dado/skirting and jointed in neat cement slurry and pointed with white/colour cement to match with the surface over 15mm thick rendering in CM 1:4 complete all as specified and directed.

Demolition of RCC of any description and in position complete all as specified and directed.

M&L RCC 1:2:4 type B1 (using 20mm graded stone aggregate) in RCC lintel, shelves, chajja, manhole covers etc. with necessary form work complete all as specified.

S&F second class hardwood plain fillets square, rectangular in section exc 6 Sqcm and not exc 13 Sqcm complete all as specified and directed.

M&L for providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete and all specified and directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.

M&L brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6 complete and all specified and directed.

M&L rendering 15mm thick plaster in cement mortar 1:6, on brick/concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.

Dismantling of CI or reinforced concrete/PVC/ drain pipe internal dia 100/75mm , jointed in cement mortar and taking out of trenches if required complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipe 110mm bore single in any type with rubber ring joint laid in wall/trenches /floor complete and all specified and directed.

S&F PVC (SWR) pipe 75 mm bore single in any type with rubber ring joint laid in wall/trenches /floor complete and all specified and directed.

S&F PVC (SWR) bend any radius 110mm bore complete and all specified and directed.

S&F PVC (SWR) bend any radius 75mm bore complete and all specified and directed.

S&F PVC (SWR)gully trap 125/110mm setting and jointing with solvent cement as fixed in repairs complete and all specified and directed.

S&F PVC(SWR) reducers 75/110mm bore complete and all specified and directed.

S&F 100mm Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete and all specified and directed.

S&F PVC (SWR) 110mm Junction single (single T) equal or unequal complete and all specified and directed.

S&F 75mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, incl bolts and nuts and securing ends of stays to wall or roof complete and all specified and directed.

S&F in repair vitreous china one piece wash down water closet pan (pedestal pattern) including flushing cistern, seat cover and all necessary fittings , white complete all as specified and directed.

S&F vitreous China urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F vitreous China urinal partition white of size 310x700mm complete all as specified.

S&F in repairs Vitreous China one piece wash down water closet pan (pedestal pattern) including flushing cistern, seat cover and and all necessary fittings, white complete all as specified and directed.

S&F in repair 32 mm waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms) complete and all specified and directed.

S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in complete and all specified and directed.

S&F in repair 15 mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete and all specified and directed.

S&F for chromium plated bib taps, cast copper alloy, fancy type with capstan head, crutch or butterfly handle chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15/20 mm dia bore, fixed as in repair, complete all as specified and directed.

S&F angular stop valves , cast copper alloy, screwed down high pressure, fancy type with crunch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions, or for 15mm dia bore, fixed as in repairs, complete all as specified and directed.

S&F towel rail 600 mm long (between flanges), 20mm dia, ‘D’ type, chromium plated brass, fixed to walls with screws and plastic cleats, fixed as in repairs, complete all as specified and directed.

S&F PVC connections of PTMT, non corrosive, with nuts & washers on both ends, 450mm long, suitable for 15mm dia bore pipe, fixed as in repairs, complete all as specified and directed.

S&F grating square (SLIT) 150mm size, of PTMT (Openable), fixed as in repairs, complete all as specified and directed.

Taking up or down steel tubing and connections, size 15 mm dia bore, including cleaning for re-fixing or removal to stores, complete all as specified and directed.

Taking up or down steel tubing and connections, size 20mm dia bore, including cleaning for re-fixing or removal to stores, complete all as specified and directed.

M&L galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 15 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and directed.

M&L galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 20 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and directed.

Dismantling water tanks exc 500 and n exc 1000 ltr and removing to store complete and all specified and directed.

M&L for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltrs capacity in SSR Part I complete and all specified and directed.

M&L non-skid coloured ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18sqm, in floors etc, set jointed in neat grey cement slurry and pointed in white or coloured cement to match, laid over and including 10 mm thick screed bed in CM 1:4, complete all as specified and directed

M&L for coloured glazed designer ceramic tiles 300 x 450 x 7 to 8mm thick on vertical surface as in dado/skirting and jointed in neat cement slurry and pointed with white/colour cement to match with the surface over and including 15mm thick rendering in CM 1:4 complete all as specified and directed.

S&F 30mm thick 2nd class soft wood glazed & skeleton window shutter open rebated and prepared to receive glass or wire mesh gangue etc( without sash bars) edges of framings plain, chamfered or rounded, fitted with cut and mitred beads for security glass etc size of members of shutters as specified in SSR Part-II section 8 clause 8.23(b) complete and all specified.

M&L for preparing old plastered or unplasters surfaces of walls and wooden applying two coats of cement based paint and removal of rubbish off the premises upto a distance not exceeding 50metres, complete all as specified and directed.

S&F in repair vitreous china wash basin with pedestal pattern, white, flat back, size 550mmx400mm including CP waste coupling and PVC water pipe and MS steel brackets complete and all specified and directed.

S&F 15mm bore pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete and all specified and directed.

M&L in repairs venation blinds roller curtain 1mm thick flap with adjustable arrangements for vertical/horizontal movements including all necessary fittings for windows as per approved design complete all as specified and directed.

S&F in repair 20mm dia powder coated MS curtain rod with require brackets, decorative piece on ends with teak finish appurtenance etc complete all as specified and directed.

M&L for 18 to 20mm the Granite (of any type) work (table rubbed and polished) in steps, jambs, cooking plat forms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete and all specified and directed.

S&F in repairs vanity wash hand basin with modular cabinet (floor mounted), white/coloured, flat back size 66cmx45cmx83 cm complete all as specified and directed.

S&F in repair sink with drainage board size 1145mmx510mm, bowl size 560mmx410mmx200 mm made of stainless steel 0.63mm thick kitchen or laboratory with plugs, washers and wastes pipe & coupling etc including bedding in cement mortar to dwraf wall or cantilever brackets and connection union to pipe complete and all specified and directed.

S&F chromium plated brass shower rose 125mm dia with swivel joints, fixed in repairs, complete all as specified and directed.

S&F in repair, stainless steel curtain rails 25mm dia including brackets etc. complete and all specified and directed.

M&L for preparation of new plastered or unflustered surface of wall and applying two coats of distemper oil emulsion over one coat of primer including chalk whiting complete all as specified and directed.

S&F swivel shower of PTMT any colour for fixing with 15mm pipe (min wt 40gms) complete all as specified.

Taking down shutters of any description exc 1 sqm but n., exc 2 sqm each and removing from site etc complete all as specified and directed.

S&F 200mm long Anodised Aluminium tower bolt complete and all specified and directed.

Hacking out old broken glass (any thickness) size, quality or description from wooden/steel frames etc complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all specified and directed.

M&L rendering 15 mm thick in cement mortar 1:4 using WPC on stone masonry surfaces or surface other than fair face of brick-work finished even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all specified and directed.

M&L for preparation of old and previously untreated plastered surface applying two or more coats of fire resisting paint over surfaces of any description wood, steel, iron, concrete, brick, stone, etc. complete all specified and directed.

M&L for preparation of new or previously untreated surface and applying two or more coats of fire resisting paint over Surfaces of any description wood, steel, iron, concrete, brick, stone, etc. over a coat of primer complete all specified and directed.

M&L two coat, of synthetic enamel paint on wooden surface of any description not otherwise described over 10 cm width or girth including preparation of old surfaces complete all as specified and directed by Engr-in -Charge.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all specified and directed.

S&F bib taps, cast copper alloy, fancy type with capstan head, crutch or butterfly handle chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm dia bore, fixed as in repair, complete all as specified and directed.

S&F angular stop valves , cast copper alloy, screwed down high pressure, fancy type with crunch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions, or for 15mm dia bore, fixed as in repairs, complete all as specified and directed.

S&F second class hardwood plain fillets square, rectangular in section exc 3 Sqcm complete all as specified and directed.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating or grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engr-in-Charge.

M&L for framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290 Gde E-165 complete all as specified and directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mm x330mm x 160mm complete all as specified and directed.

S&F aluminium door closer hydraulically regulated, designation No 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

Taking down carefully any type point wiring (light, fan, socket or power) complete including conduits/casing- capping with fittings such as light fittings, sockets, switches ceiling roses, board outlets etc and removing the materials/ debris and making good the disturbed surfaces of walls, floor etc to match with the existing surface complete all as specified and directed.

M&L for Point wiring using proper colour coding complete with 1100 Volts grade 1.5 Sq.mm, single core, PVC insulated, unsheathed cable with multistranded copper conductor with ISI mark FRLS grade, conforming to IS-694 in and including PVC medium grade conduit not less than 25mm dia. ISI marked with all accessories concealed in wall/ceiling/ floor /roof etc, sunk pressed steel/GI terminals boxes having 1.6 mm thick suitable for housing of modular type switches/sockets/fan regulators, including 1.5 Sq.mm PVC insulated, unsheathed, multistranded copper conductor, FRLS 1100 Volts grade (green colour) as earth wire, connected to common earth dolly for One light point/fan point/Ex fan point controlled by one 5 Amps switch one way complete all as specified and directed.

All as per ser item No 139 here-in-before but one 3 pin 5 Amps switch socket outlet on independent board

All as per ser item No 139 here-in-before but one 3 pin 5 Amps switch socket outlet on same board with accessories

All as per ser item No 139 but here-in-before one bell/buzzer controlled by one switch

M&L for Point wiring using proper colour coding complete with 1100 Volts grade 2.5 Sq.mm, single core, PVC insulated, unsheathed cable with multistranded copper conductor with ISI mark FRLS grade, conforming to IS-694 in and including PVC medium grade conduit not less than 25mm dia. ISI marked with all accessories concealed in wall/ceiling/ floor /roof etc, with sunk pressed steel/GI terminals boxes having 1.6 mm thick suitable for housing of modular type switches/sockets/fan regulators, including 2.5 Sq.mm PVC insulated, unsheathed, multistranded copper conductor, FRLS 1100 volts grade (green colour) as earth wire, connected to common earth dolly for switch socket combination, 3 pin, 15 Amps on independent board all as specified and directed.

S&F switch piano flush type, single pole, one way 6 Amps 240 Volts, complete all as specified and directed.

S&F switch piano flush type, single pole, 15 Amps 240 Volts, complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete with gang box all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete with gang box all as specified and directed.

S&F ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body all as specified and directed.

S&F in repairs Distribution Board, SPN 8 Way, Double door complete all as specified and directed.

S&F in repairs MCB,DP 40 Amps 240 Volts B curve, complete all as specified and directed.

S&F MCB single pole 6-32A Amps 240 Volts B Curve complete all as specified and directed.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as specified and directed.

Taking down carefully copper/aluminium point wiring (light. Fan, socket or power) complete, including fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc to match with existing surfaces complete all as specified and directed.

M&L for point wiring for using 1.5 Sqmm nominal cross section area copper conductor multistandard PVC unsheathed, FRLS cable in and including using PVC casing capping not less than 25mm size and fittings including pvc box with suitable size of pvc sheet for top cover(ISI marked) fitted with chromium plated steel screws and washer and 1.5 Sqmm nominal cross section area multistandared copper conductor FRLS green pvc insulated unsheathed earth wire and connecting to earth dolly using colour code as per IS including terminal boxes suitable for fixing socket and switches one light point/fan point/Ex fan point controlled by one 5 Amps switch one way all as specified and directed by Engr-in-Charge.

All as per ser item No 154 here-in-before but one 3 pin 5 Amps switch socket outlet on independent board

All as per ser item No 154 here-in-before but one 3 pin 5 Amps switch socket outlet on same board with accessories

M&L for point wiring for using 2.5 Sqm nominal cross section area copper conductor multistandard PVC unsheathed, FRLS cable in and including using pvc casing capping not less than 25mm size and fittings including pvc box with suitable size of pvc sheet for top cover(ISI marked) fitted with chromium plated steel screws and washer and 2.5 Sqmm nominal cross section area multistandared copper conductor FRLS green pvc insulated unsheathed earth wire and connecting to earth dolly using colour code as per IS including terminal boxes suitable for fixing socket and switches all as specified and directed by Engr-in-Charge.

S&F LED light fitting 1x10 bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.

S&F LED bulb 12 W, 220V suitable size from ceiling rose complete all as specified and directed.

S&F Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate No.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc.

Supplying only PVC flat twin core cable PVC insulated aluminium conductor size 10 sqmm 2 core complete all as specified and directed.

S&F modular type switch 6 Amps, one way one module complete all as specified.

S&F modular type socket outlet, 6 Amps, 2/3 pin combined 2 module complete all as specified.

S&F modular type socket outlet, 6/16 Amps, combined 2 module complete all as specified.

S&F modular fan step regulator,120 Watts - 2 module complete all as specified and directed by Engr-in-Charge.

M&L for white cover with frame suitable for accommodating 01 No module switch/socket etc complete all as specified and directed by Engr-in-Charge.

M&L for white cover with frame suitable for accommodating 02 Nos module switch/socket etc complete all as specified and directed by Engr-in-Charge.

M&L for white cover with frame suitable for accommodating 03 Nos module switch/socket etc complete all as specified and directed by Engr-in-Charge.

M&L for white cover with frame suitable for accommodating 4 Nos module switch/socket etc complete all as specified and directed by Engr-in-Charge.

M&L for white cover with frame suitable for accommodating 6 Nos module switch/socket etc complete all as specified and directed by Engr-in-Charge.

M&L for white cover with frame suitable for accommodating 8 Nos module switch/socket etc complete all as specified and directed by Engr-in-Charge.

S&F PVC body fresh air fan with PVC blades, ISI marked, 225 mm sweep with louvers and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to fresh air fan complete in all respect all as specified and directed.

S&F PVC body fresh air fan with PVC blades, ISI marked, 250 mm sweep with louvers and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to fresh air fan complete in all respect all as specified and directed.

M&L for sub main wring using proper colour coding with 3 runs of single core, PVC insulated, FRLS unsheathed suitable for 1100 Volts, Multistranded, copper conductor cable of size 6 Sqmm drawn and including PVC conduit medium grade not less than 25 mm dia, ISI marked concealed in wall/roof etc with required accessories complete all as specified and directed. Notes :- (i) The minimum size of PVC conduct shall be 25mm however higher shall be used as per numbers of conductor to be pass through the conduit. Engr-in-Charge shall ensure for proper size of PVC conduit be used at site. (ii) Separate conduit shall be used for each sub main wiring circuit irrespective of any number of wire. (iii) 3 runs of conductor and one run of conduit shall be measured as one run.

S&F 1x20 Watt baton integrated LED channel tube light fitting, 230 Volts indoor housing with integral sleek extruded polycarbonate LED channel with white acrylic cover surface/wall mounting, with inbuilt electronic driver/control gear, begin holders, connector block etc complete with all accessories internally pre wired and including connecting lead, three core 1.5 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

S&F 1x10 Watt baton integrated LED channel tube light fitting, 230 Volt indoor housing with integral sleek extruded polycarbonate LED channel with white acrylic cover surface/wall mounting, with inbuilt electronic driver/control gear, begin holders, connector block etc complete with all accessories internally pre wired and including connecting lead, three core 1.5 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

S&F LED Lamp 9 W 'T' type complete all as specified and directed. Make Havells LHLDDDECBD2R009 3 Star/ Philips / Bajaj/Crompton

S&F track light bed side decorative type complete all as specified.

S&F SMD LED panel recess/surface 15 Watt Round/square type ' LED ceiling light with extruded aluminium housing and milky diffuser including connecting up with twin core twisted flexible copper conductor cable with suitable size of 170-230 Volts, 50HZ complete all as specified and directed.

S&F angular holder, PVC body complete with wiring etc. all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed.

S&F ceiling rose surface Bakelite 65x50mm with three terminals complete all as specified and directed.

M/s Mohammad Shafi Malik (BID ID -3488658)

M/S ABDUL MAJID LONE (BID ID -3492791)

MS DUTTA BUILDERS (BID ID -3488570)

M/S GHULAM MOHIUDDIN RATHER (BID ID -3488071)