WORK SERVICES FOR OPERATION OF PUMP HOUSE AND SLUICE VALVE AND COMPREHENSIVE MAINT AND REPAIR OF BOOSTER PUMP SET AND WATER SUPPLY DISTRIBUTION SYSTEM OF AGV AT AF STATION CHAKERI KANPUR

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out for taking out/laying pipes in soft/loose soil complete all as specified and directed.

Returning, filling,including spreading levelling watering and well ramming in layers not exceeding 25cm thick in solf/loose soil after pipes are laid and tested complete all as specified and directed .

Removing of excavated material(soils) not exc 50 mtr distance and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed .

M & L for providing PCC 1:2:4 type B1 using 20mm graded stone aggregate as in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars including necessory form work complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for re-fixing or removal of the size 32 mm bore complete all as specified and directed. For below or above ground to 4th Floor

Taking up or down steel water tubing and connections including cleaning for re-fixing or removal of the size 50 mm bore complete all as specified and directed.

Re-fixing old steel tubing and connection in new or old position in trenches/wall/ ceiling/ floors etc with using all new fittings complete including making good the disturbed portion of size 32 mm bore complete all as specified and directed.

Re-fixing old steel tubing and connection in new or old position in trenches/wall/ ceiling/ floors etc with using all new fittings complete including making good the disturbed portion of size 50 mm bore complete all as specified and directed.

M & L for GI pipe medium grade ISI marked with all necessary fittings laid in trenches/on wall/in floor for the size 32 mm bore complete all as specified and directed. Make-Jindal/Tata/ Prakash Surya For below or above ground to 4th Floor

M & L for GI pipe medium grade ISI marked with all necessary fittings laid in trenches/on wall/in floor for the size 50 mm bore complete all as specified and directed. Make-Jindal/Tata/ Prakash Surya

M&L in replacement for MS pipe heavy duty 150 mm dia both end flanged conneted with suitable size nut bolt washer and suitable flange gasket for header complete all as specified and directed

M& L for attending the day to day complaint of minor nature of work including minor fittings such as elbow,socket,tee etc and deposting the complaint slip in complaint cell after user signature complete all as specified and directed

S&F in replacement of float valve (ball valves) high pressure of PTMT with epoxy coated alluminium rod & high density plastic ball ISI marked screwed for iron pipe of the Size 25 mm bore complete all as specified and directed. Make- Leader/Prayag/Zoloto

Supply and fixing of Contactor Model No MNX-12 making proper connection with suitble lugs complete all as specified and directed. Make-L&T/Siemens/Legrand

Supply and fixing in replacement of phase sequencer cum pump protection system 415/440 volts, 50 Hz, internal working voltage 12/14 volt, suitable for 50 HP capacity with MNX-95 Contactor in it for auto change of phase sequence if incommimg phase sequence changes, single phasing prevention system and adjustable low and high voltage protection system to protect the machinery, mounting on bracket made out flat iron/Angle iron 40x3 mm iron frame, all control wirings, cable connections complete all as specified and directed. Make : Indian Engineering Co. /United Engineering

M&L in replacement for MCCB 100 Amp , TP ,25 KA including reconnection of cable complete all as specified and directed. Make- L&T /Legrand

All as above but rating of MCCB 200 Amp , TP , 35 KA including reconnection of cable complete all as directed. Make- L&T /Legrand/Siemens

S&F in replacement MCB TPN 415 volts 63 Amps, C type including connectiuon with suitable size almuminium/ copper lugs in repairs complete all as specified and directed. Make- Legrand/L&T/Simens

S&F in replacement MCB SPN 240 volts 40 Amp including connection with suitable size aluminium / copper lugs complete all as specified and directed. Make- Legrand/L&T/Siemens

S&F in replacement Multi function meter of 50 Hz , 240 volt complete all as specified and directed. Make- Legrand/L&T/Siemens

S&F in replacement pressure gauge size 100 mm dia round ISI marked,range 0-10 Kg/cm2 complete with air cock/stop cock all as directed. Make:H Guru/Jackson

M&L for Earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5M below normal ground level, connected to galvanized earth strip 32mmx6mm by means of bolts, nuts, check nuts and washers of galvanised iron including necessary excavation and earth work ,earth pit chamber in PCC (1:3:6) type C-1 using 20 mm graded aggregate with 40 mm thick pre-cast RCC cover in (1:2:4) type B-1 using 20 mm graded stone aggregate, reinforced with 8 mm dia TMT bar@75mm c/c both way with two Nos lifting handles of 12 mm dia mild steel plain bar, funnel with wire mesh, lugs, 40mm dia galvanised iron protection pipe light grade ,watering pipe of size 20 mm dia galvanised iron light grade, main Earthing strip upto 7.5M including charcoal dust, common salt etc all as shown in electrical plate No. 3 of SSR Pt-I 2009 including testing on completion complete all as specifed and as directed.

S & F of Copper conductor PVC sheathed cable stranded Single core of size 16 Sqmm multistarnd with suitable copper lugs including taking down unserviceable cable complete all as specified and directed. Make - Havells/Finolex/Paragon

M & L for submersible cable, PVC insulated and sheathed, 3 core, 16 Sqmm, multistranded copper conductor, 1100 volt grade, heavy duty including taking down unserviceable cable complete all as specified and directed. Make - Havells/Finolex/Grandlay

M&L for PVC Conduit of size 40 mm flexible complete all as specified and directed

M & L for construction of valve chamber in replacement 600mm x 600mm x 950 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of (40x40x6) mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in CM (1:6), 230 mm thick, PCC bed (1:4:8) type D2 40 mm graded stone aggregate 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces incl dismantling and removal of old unserviceble valve pit complete all as specified and directed.

M & L for construction of valve chamber 950mm x 950mm x 950 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of (40x40x6) mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in CM (1:6), 230 mm thick, PCC bed (1:4:8) type D2 40 mm grade stone aggregate 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces including dismantling and removal of old unserviceble valve pit complete all as specified and directed.

S & F in replacement Bus Bar of 100 A and 415 V 4 Nos and jointing all incoming and outgoing connectiom by suitable Lugs complete all as specified and directed.

S&F street light fitting 45 watt LED with pressure die cast housing suitable for scondary road/bldgs power consumtion should not be more than 45 watt and power factor should not be less than 0.90 with suitable GI pipe 32 mm dia (bore) medium grade bracket incl clamps, nuts , bolts and washers etc with all fixing arrangement complete all as per specified and directed. Make wipro/Crompton Greaves/Surya

Work services for operation of pump sets,Fire genrator (DG set) with all equipments ,Sluice Valves / Gate Vlaves of any sizes and supply of water as per schedule timing of supply installed in pump houses at Akash Ganga Vihar pump house in three shift (01 operator in each shift) including daily routine cleaning of all equipments and installation complete all as specified and directed. Tentative shift timing shall be as under, however it can be changed as per site requirement:- (i) 0600 hrs to 1400 Hours (ii) 1400 hrs to 2200 Hours (iii) 2200 hrs to 0600 Hours (a) No payment will be made for Nos of day (08 Hrs) when trademen absent and effective recovery @ Rs 500/- shall be made for per shift per operator/valveman (08 hrs). (b) Any T&P required for routine cleaning shall be arranged by the contractor without any extra cost to Govt. (c) Particulars of employeded trademan shall be maintained properly. (d) Proper record/attendance register duly signed by contractor, concerned JE and Engineer-in-Charge shall be maintained. (e) Provn of daily log sheet shall be the responsibility of the contractor with out any extra cast and shall be submitted to the deptt duly signed by the trademen.

M&L for overhauling of pump set of capacity 15HP centrifugal type by dismentling the pump set from the location for carrying out following repair/overhauling. (a) Strip opening of pump set. (b) Rematalling of pump shaft by cuttting/welding and turning and polishing to match the existing size. (c) Replacement of ball bearing -02 No (d) Replacement of Pump casing Complete. (e) Replacement of Shaft and shaft Sleeve (f) Replacement of impeller with GM Impeller with key and check nut. (g) Terminal Plate with 06 Nos Terminals.

Dismantling and taking out Monoblok pump 15 HP, making threading and key way, turning surfacing polishing to impellers, greasing complete including replacement of worn out parts as per requirement complete all as specified and directed Note: Spare parts shall be measured & paid separately.

Supply only GM impeller of suitable size & type complete all as specified and directed.

Supply only pump shaft stainless steel of suitable size & type complete all as specified and directed .

Supply only pump shaft sleeve of suitable size & type complete all as specified and directed.

Supply only Gland cover of suitable size & type complete all as specified and directed.

M&L for rewinding of monoblok/centrifugal pump 15 HP with copper wire of existing gauge as per motor capacity using new insulation material such as insulating paper sleeves etc. including cleaning and testing complete all as specified and directed.

Supply only bearing of model No-6308 complete all as specified and directed. Make- SKF/NBC

Supply and fix in replacement of butter fly valve of size 100 mm bore ISI marked heavy duty including suitable nut,bolt & washer complete all as specified and directed. Make- Sant /leader/Zoloto

Supply and fix in replacement of butter fly valve of size 150 mm bore ISI marked heavy duty including suitable nut,bolt & washer complete all as specified and directed. Make- Sant /leader/Zoloto

M & L for sluice valves class PN-1 ISI marked with suitable CM/L No with flanged ends, with stainless steel spindle duly drilled for nut bolts of size 150 mm dia including taking down unserviceable sluice valve complete all as specified and directed :- Make : Kirloskar / Upadhyay/Kartar

M & L for sluice valves class PN-1 ISI marked with suitable CM/L No with flanged ends, with stainless steel spindle duly drilled for nut bolts of size 100 mm dia including taking down unserviceable sluice valve complete all as specified and directed :- Make : Kirloskar / Upadhyay/Kartar

S&F in replacement non return valve 150 mm size ISI marked with suitable nut,bolt & washer complete all as specified and directed Make- Kirloskar/Upadhyay

S & F in replacement of battery 12 volts 180AH by replacing complete negative & positive plates & poles PVC separator, electrolytes , parts & initial recharging including testing complete all as specified and directed

Supply & fixing in replacement of Gun metal Gate valve with iron wheel, head screwed both ends for cast iron pipe of size 32 mm bore complete all as specified and directed Make-Sant/Leader/zoloto

Supply & fixing in replacement of Gun metal Gate valve with iron wheel, head screwed both ends for cast iron pipe of size 50 mm bore complete all as specified and directed. Make-Sant/Leader/zoloto

S&F line diagram display board made out of flex sheet of size approx 900 mm X 600 mm for STP plant , AGV pump house & fire fighting system of AGV including fixing arrangement of suitable size fastner/screw complete all as specified and directed . Note :- Line diagrame shall be approved by GE before making the display board

Taking up or down 32 mm bore Galvanised iron steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and directed. 5TH TO 8TH STOREY

Taking up or down 32 mm bore Galvanised iron steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and directed. 9TH TO 11 STOREY.

S&F 32 mm bore Galvanised iron steel water tubing 'medium grade' with all fitting such as bend, socket,elbow,reducer,tee etc fixed to wall or laid in floors complete all as specified and directed. Make:-Jindal/Tata/Prakash Surya 5th to 8th storey

S&F 32 mm bore Galvanised iron steel water tubing 'medium grade' with all fitting such as bend, socket,elbow,reducer,tee etc fixed to wall or laid in floors complete all as specified and directed. Make:-Jindal/Tata/Prakash Surya 9th to 11th storey

S&F perforated Galvanised iron cable tray of width 100 mm and side rail height 30mm fixed to wall or hanging to ceiling by means of flat iron strip including nut, bolt and washer complete all as specified and directed.

S&F perforated Galvanised iron cable tray of width 300 mm and side rail height 50mm fixed to wall or hanging to ceiling by means of flat iron strip including nut, bolt and washer complete all as specified and directed.

M&L for painting of steel and iron surfaces with one coat of synthetic enemelled paint after preparation of old painted surfaces complete all as specified and directed.

M&L Spray painting with synthetic enamelled oil paint with two coats after prepration of painted surface complete all as specified and directed for following Item. (a) Pump Set- 06 No (b)Pipe Line -30 RM (c ) LT Panel (d) Fire DG Set-01 No (e) LT Panel-01 No

PAWAN COOL CORPORATION