Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.5 LAccepted-AOC 145 SAINIK NAGAR RAIBARELLI ROAD TELIBAGH LUCKNOW | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹14.3 L+₹1.8 L (14.1%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹14.4 L+₹1.9 L (14.8%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹14.5 L+₹2.0 L (15.7%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 |
Tender Value
₹13 L
EMD Value
₹26,000
Closing Date
30 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) AF MEMAURA
AGE (I) AF MEMAURA
SPECIAL REPAIR TO RADAR HEAD BLDG NO 225 AT AF STN MEMAURA
2024_MES_670469_1
8356/E8
Open Tender
Civil Works
Works
183 days
AGE (I) AF MEMAURA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) AF MEMAURA
₹26,000
Yes
11 Oct 2024
3 Sept 2024
2 Oct 2024
3 Sept 2024
30 Sept 2024
17 Sept 2024
Amount
M&L for roof treatment with polymeric water proofing membrane with certain specification given below as under complete all as specified and directed (a) Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. (b) M&L for 15 mm thick screed bed in CM 1:3 mixed with water proofing compound as per manufacturer instruction, laying over green concrete surfaces, finishing the surface even and smooth with out using extra cement (WPC measured separately). (c) After the concrete fully dried it shall be cleaned free from dust and shall be painted with a coat of bituminous primer @ 0.40 litre/Sqm (d) After primer, the entire roof surface shall be applied with hot blown bitumen grade 85/25 conforming to IS-702 @ 1.2 Kg/Sqm (e) Over hot bitumen, polymeric water proofing membrane consisting of 90 to 100 micron thick central core of HMHDPE film with standard weight not less than 3Kg/Sqm shall be laid with 100mm side lap/end lap on prepared surfaces as of manufacture's technical representation with fusing the joints with blow torch application. (over lap will not be measured) (f) Applying a tack coat of hot blown grade 85/25 @ 0.30 Kg/Sqm
Supply only Liquid waterproofing compound complete all as specified and directed
M & L for preparing surfaces by brushing with wire brushes, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc on roof surface and priming with alkali resistant priming paint and applying two coats of 100% premium acrylic emulsion paint in camouflaging pattern (Sigma MK-III pattern) having VOC less than 50 gm/lit and UV resitance as per IS 15489-2004 alkali and fungal resitance,dirt resitance exterior paint of required shade (company depot tinted) with silicon additives @1.43 lit/10 sqm over and including priming coat of exterior primer applied @0.9lit/10 sqm over newly prepare surface complete all as specified including necessary scaffolding arrangement and as directed by Engineer-in-Charge.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.
M&L for exc 13 & n. exc 25 Sqcm plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brands complete all as specified and directed by Engineer in charge
M&L for 12mm thick perforated gypsum board/tiles for insulation and accoustic purposes, 60x60cm in size, fixed with nails to timber frame work or with staples on snap grid fixed in repairs etc complete all as specified and directed
Excavating in post holes in soft/loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed
M&L PCC 1:2:4 type B-2 (using 40mm graded stone aggregates) foundation fillings and mass concrete complete all as specified and directed.
S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 including one shop coat of Zinc chromate primer paint at contractors workshop before fabrication complete all as specified and directed
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings etc complete all as specified and directed
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed
Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed .
Demolition of cement concrete in ground floors and pavings n exe 15cm thickness (below or above ground level) of any description and in any position not otherwise specifically provided complete all as specified and directed .
M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in sub floor, sub base etc even and rough to receive screed bed etc (without using extra cement) complete all as specified and directed.
M&L Non skid ceramic coloured tiles joint free 7-8 mm thick (Square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors set and jointed in neat cement slurry and pointed with white or cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specifed.
S&F of mild steel framed work such as joist, channel, angle of size or tee section conforming to Fe 410 (Gde E-250) complete all as specified & directed.
S&F of Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Material & labour for reinforced cement concrete 1:2:4 type B0 (using 12.5 mm graded Stone aggregate) as in slabs supported walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete all as specified and directed.
S&F in repair 75 mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes incuding PVC Tee,socket elbow,clamp etc complete all as specified and directed
S&F in repair 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes incuding PVC Tee ,socket,elbow,clamp etc complete all as specified and directed
Supply & fixing in repairs 25mm thick 2nd class hardwood planks n.exe 30 cm in width on vertical wall/iron surfaces any height incl necessary scaffolding, screws, nails, etc complete all as specified and directed.
M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying 2 coats of synthetic enamel (ordinary tint) paint over a coat of primer etc complete all as specified and directed.
Taking down of cement plaster of any description from brick or stone wall etc incl raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L 15mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed.
M&L for preparation of newly plastered wall/concrete surface and applying two coats of oil bound distemper over a coat of putty etc complete all as specified and directed.
M&L for hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface etc complete all as specified and directed
M&L for 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) finishing surfaces of concrete topping even and fair (without using extra cement) etc complete all as specified and directed
M/s R D Enterprises (BID ID -3121417)
M/s RAAJSHREE INFRA (BID ID -3115526)
PARAMOUNT ENGINEERS (BID ID -3121738)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .