Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹18.6 LAdmitted-Fee/PreQual/Technical/Finance | +2.00% | ₹18.6 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L2₹19.5 L+₹87,077.28 (4.67%)Admitted-Fee/PreQual/Technical/Finance | +7.00% | ₹19.5 L+₹87,077.28 (4.67%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | ms jagdish prasad agarwal chittorgarh L1 | M/s Netaji Enterprises, Kapasan L2 |
|---|---|---|---|---|---|
| 1.00 | 15 MM DESMOTRACK SANDWICH
RUNNING TRACK SYSTEM (Supply &
Laying)
Desmotrack Sandwich Running Track system,
Supply and installation of Desmotrack EPDM
rubberized flooring incastinsitu form with top
layer of 4 mm 100% EPDM (Ehtylene Propylene
Die monomer) mix with Desmotop C303
Polyurethane, Sealer coat by Desmotop C302
Polyurethane coat and bottom layer of 9.6 mm
Styrene-Butadiene Rubber (SBR) mix with single
component Desmotop-rr 2008 binder. UV
stabilize Desmotop C305 2k polyurethane white
Line marking. Standard Installation according to IAAF Norms. | 1,500 | P.Sqft | 670 ₹10,05,000 Lowest | 700 ₹10,50,000 |
Tender Value
₹15.3 L
EMD Value
₹30,640
Closing Date
2 Jun 2026, 10:00 amClosed
Executive officer
municipal board kapasan
Supply and installation of Desmotrack EPDM Rubberized flooring on Running Track and Other Necessary work in Volleyball ground in Kapasan.
2026_DLB_561081_6
E-NIT 01/2026-27
Open Tender
Civil Works
Percentage
90 days
KAPASAN
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Executive officer
₹30,640
Yes
8 Jun 2026
22 May 2026
2 Jun 2026
22 May 2026
2 Jun 2026
22 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing welded mesh/expanded metal mesh 25 mmx 25 mm x 3mm in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. including two coat of red oxide and two coat of enamel paint or more required complete with frame work with 50 X 50 X 6mm angle iron post 30 cm in ground embeded in cement concrete 1:3:6 (30X30X45cm) at corner and every three mtr including painting with one coat of primer and two coat of enamel paint work will be done as per direction of engineer incharge of size complete in all respect. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR | 275 | P.Sqm | 1,657 | ₹4,55,675 |
| 2 | Filling with locally available river sand at all levels including watering ramming consolidating and dressing complete including cost of sand. | 148.5 | P.Cum | 1,013 | ₹1,50,430.5 |
| 3 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required : In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | 1,000 | P.Kg | 144.5 | ₹1,44,500 |
| 4 | Providing & Fixing of IK08 IP-66 protected high power LED flood light system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each . Integrated potted driver as a unique BIS R number having efficiency more than 85 % and in compliance to BIS certified and Trade mark certificate. The System level Luminaire efficacy >=125 lm/ wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety .Power Factor >0.95 , THD(I) <10% , driver current <=750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector , Surge Protection Min >=4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700K ±355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .:High Power LED Flood Light Minimum lumen output 14800 lm | 10 | P.Each | 9,094 | ₹90,940 |
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.33 MB
NT0.pdf
Tender Documents • 1.32 MB
BOQ_998642.xls
BOQ • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .