Repair to toilet Block inside Factory OCFS

Excavating in trenches n.exe.1.5m wide and n.exe.1.5m in depth for foundation, getting out soft & loose soil.

M&L broken brick hardcore of gauge n.exc 63mm , deposited , spreaded and levelled in layers n.exc. 15cm thick watered and rammed to a true surface

M&L Cement conerete in foundations filling and mass concrete Type C2 1:3;6 (40mm stone aggregate).

Dismantling of brickwok built in cement mortar or cement lime mortar.

Removing mortar from and cleaning bricks , stacking including all extra handling and removal and disposing off rubbish built in cement or lime mortar..

M&L brick work with sub class 'A' bricks straight or curved on plan exc. 6m mean radius built in 1:4 mix cement mortar. except bricks ( Using Old bricks recovered from demolition of demaged wall).

M&L brick work with sub class 'A' bricks straight or curved on plan exc.6m mean radius built in 1:4 mix cement mortar.

M&L Brickworks with sub class'A' bricks straight etc.built in cement motar in 1:4mix cement motar. half brick thick wall.

Taking down old damaged cement plaster on brick walls/ceiling, including raking out joints,hacking for key, serubbing down with water etc.

Rendering 12mm thick cement plaster in 1:4 mix cement mortar on walls.

Demolation of cement concrete any descreption

Providing 55 mm Cement concrete type B-1, 1:2:4 (20mm graded aggregate)finishing cement concrete surface even and smooth without using extra cement concrete.

S&F Glass dividing strips, 3mm thick and 38mm width and inserted in position to conform to design.

Dismantling floor or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

S&F Non - skid Ceramic white tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. (Make-Kejaria, Somani,Orient)

Providing screed bedding layer of mortor 25 mm thick for laying floor finish 1:4 ratio.

S&F Glazed ceramic joint free colour tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match. (Make-Kejaria, Somani,Orient)

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 (Gde E-165). M&L complete.

S/F of Pre painted galvalume aluminum zinc coating G.I based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified

S&Fixing in repair of vitreous china squatting pan of "Orissa" patterns size 580X440 mm white with integral footrest (excluding flushing cistern)"P" or "S" trap front or back inlet of any pattern including lime concrete bedding connection to trap & flushing pipe including trap set,including flush pipe of polyethene of low level of PVC 32 mm dia & concrete bedding & making good to floor. (Make-Parry ware, Cera, Hindustan)

S&Fixing in repair of vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with "P" or "S" PVC 110/110mm bore trap front or back inlet of any pattern including connection to trap and flushing pipe, S&F flush pipe of polyethene of low level PVC 32 mm dia & concrete bedding &making good to floor. (Make-Parry ware, Cera, Hindustan)

S/Fixing in repair of PVC 10 litres valveless syphonic action type flushing cistern low valve white with inlet ball valve float and handle including brackets. (Make-Parry ware, Cera, Hindustan)

S&F PVC connections 15mm size with PTMT nuts of length 300mm.

S/F of Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

M&L of Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe). (Make-Parry ware, Cera, Hindustan)

M&L of vitreous china squatting plate urinal, white (excluding flushing cistern, flush pipe and waste pipe). (Make-Parry ware, Cera, Hindustan)

S&F Vitreous China Wash basins, white,flat back, size 580X450 mm including cutting for and pinning in ends of brackets fixed in repair. (Make-Parry ware, Cera, Hindustan)

S&F of 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. (Make-Parry ware, Cera, Hindustan)

S&F of fancy type 15mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F PVC(SWR) pipe single socketed in any length with rubber ring joints, fixed to walls 110mm bore.

S&F of bends PVC(SWR) 110mm bore.

S&F of junction single(single T), equal,or unequal,110mm bore.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement.

S&F stop valve but fancy type, chromium plated serewed down high pressur with butterfly handle serewed both ends for Iron pipe or for union & fixed 15mm of bore.

S&F High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches 15mm with all fittings.

S&F High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches 25mm with all fittings.

M&L for apply 3 mm thick cement base wall care putty.

Preparation of new plastered surface and apply two coat of paint plastic emulsion on wall as directed. M&L compete.(Make-Asian, Nerolack, Berger Ist Quality)

Preparation of old plastered surface and apply two coat of paint plastic emulsion on wall as directed. M&L compete. (Make-Asian, Nerolack, Berger Ist Quality)

Preparation of old steel surface and apply two coat of synthetic enamel paint over priming with red oxide as specified.M&L complete. (Make-Asian, Nerolack, Berger Ist Quality)

M&L Providing Precast cement concrete Type B 1 1:2:4 (20 mm graded aggregate) in landings, cover slaps for manholes and similar articles with plain faces as directed.

M&L M.S. Bars 10 mm dia or over, cut to lenth, bent to shape and binding with M.S. wire as required/directed.(TMT bars).

Removing building materials to a distance of 200 m including loading unloading and stacking where directed by EIC .

Please Enable Macros to View BoQ information