REPAIR/MAINT TO FILTRATION PLANT, VALVE PIT CHAMBER AND REPAIR/MAINT OF PUMP SETS, CLEANING OF POOL AND CERTIAN MIS WORKS AT MIL STN SRI GANGANAGAR

Amount

Excavation in trenches for daily maintenance invloving excavation for pipeline leakage detection or for replacement of underground unserviceable GI/CI/DI pipeline etc in soft/loose soil & getting out in n.exc. 1.5 m wide & n. exc. 1.5m in depth for foundation etc n. exc 10 sqm on plan and n. exc. 1.5 m in depth and getting out complete all as specified and directed by Engineer - in - Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc. 25cm in soft/loose soil complete all as specified and directed by Engineer - in - Charge.

Removing excavated material n. exc. 50 m & depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed by Engineer - in - Charge.

M&L repairs of leakage of 25mm bore GI pipeline "medium grade" including joints, branch connections, replacement of nipple, union, tee, elbow and misc fittings complete all as specified and as directed by Engineer-in-Charge. Note: i) Replacement of defective pipeline of length exceeding 1 metre shall be measured in seperate schedule of item. ii) Excavation work shall be measured in seperate schedule of item. iii) Fitting work including tee, bend, ferrule, union etc, pipeline of length upto 1 metre shall be deemed to be included in the quoted rate.

M&L repairs of leakage of 40mm bore GI pipeline "medium grade" including joints, branch connections, replacement of nipple, union, tee, elbow and misc fittings complete all as specified and as directed by Engineer-in-Charge. Note: i)Replacement of defective pipeline of length exceeding 1 metre shall be measured in seperate schedule of item. ii) Excavation work shall be measured in seperate schedule of item. iii) Fitting work including tee, bend, ferrule, union etc, pipeline of length upto 1 metre shall be deemed to be included in the quoted rate.

M&L repairs of leakage of 50mm bore "medium grade" GI pipeline including joints, branch connections, replacement of nipple, union, tee, elbow and misc fittings complete all as specified and as directed by Engineer-in-Charge. Note: i)Replacement of defective pipeline of length exceeding 1 meter shall be measured in seperate schedule of item. ii) Excavation work shall be measured in seperate schedule of item. iii) Fitting work including tee, bend, ferrule, union etc, pipeline of length upto 1 metre shall be deemed to be included in the quoted rate.

M&L repairs of leakage of 80 mm bore medium grade GI pipeline including joints, branch connections, replacement of nipple, union, tee, elbow and misc fittings complete all as specified and as directed by Engineer-in-Charge. Note: i)Replacement of defective pipeline of length exceeding 1 metre shall be measured in seperate schedule of item. ii) Excavation work shall be measured in seperate schedule of item. iii) Fitting work including tee, bend, ferrule, union etc, pipeline of length upto 1 metre shall be deemed to be included in the quoted rate.

M&L repairs of leakage of 100 mm bore medium grade GI pipeline including joints, branch connections, replacement of nipple, union, tee, elbow and misc fittings complete all as specified and as directed by Engineer-in-Charge. Note: i)Replacement of defective pipeline of length exceeding 1 metre shall be measured in seperate schedule of item. ii) Excavation work shall be measured in seperate schedule of item. iii) Fitting work including tee, bend, ferrule, union etc, pipeline of length upto 1 metre shall be deemed to be included in the quoted rate.

M&L repairs of leakage of 150 mm bore GI pipeline including joints, branch connections, replacement of nipple, union, tee, elbow and misc fittings complete all as specified and as directed by Engineer-in-Charge. Note: i)Replacement of defective pipeline of length exceeding 1 metre shall be measured in seperate schedule of item. ii) Excavation work shall be measured in seperate schedule of item. iii) Fitting work including tee, bend, ferrule, union etc, pipeline of length upto 1 metre shall be deemed to be included in the quoted rate.

S & F in replacement CI sluice valve class PN -1.6 ISI marked complete suitable for 300 mm bore of pipe with flanged ends and drilled stainless steel spindle CI gate with brass ring and cast iron cap etc complete all as specified duly fixed at site with rubber flanges, nuts / bolts and washers including repair to disturbed surfaces and testing on completion complete all as specified and directed by Engineer-in-charge.

S&F in replacement CI sluice valve class PN -1.6 ISI marked complete suitable for 200 mm bore of pipe with flanged ends and drilled brass spindle CI gate with brass ring and cast iron cap etc complete all as specified duly fixed at site with rubber flanges, nuts / bolts and washers including repair to disturbed surfaces and testing on completion complete all as specified and directed by Engineer-in-charge.

S&F in replacement CI sluice valve class PN -1.6 ISI marked complete suitable for 150 mm bore of pipe with flanged ends and drilled brass spindle CI gate with brass ring and cast iron cap etc complete all as specified duly fixed at site with rubber flanges, nuts / bolts and washers including repair to disturbed surfaces and testing on completion complete all as specified and directed by Engineer-in-charge.

S&F in replacement CI sluice valve class PN -1.6 ISI marked complete suitable for 100 mm bore of pipe with flanged ends and drilled brass spindle CI gate with brass ring and cast iron cap etc complete all as specified duly fixed at site with rubber flanges, nuts / bolts and washers including repair to disturbed surfaces and testing on completion complete all as specified and directed by Engineer-in-Charge.

S & F in replacement CI sluice valve class PN -1.6 ISI marked complete suitable for 80 mm bore of pipe with flanged ends and drilled brass spindle CI gate with brass ring and cast iron cap etc complete all as specified duly fixed at site with rubber flanges, nuts / bolts and washers including repair to disturbed surfaces and testing on completion complete all as specified and directed by Engineer-in-Charge.

S&F in replacement,cast iron fitting of any size suitable for spigot and socket or flanged pipes etc including all joinery items complete all as specified and directed by Engineer-in-Charge

S&F in replacement of valve pit/ water sump cover of mild steel Sheet of existing thickness duly supported with MS Angles of existing size fixed on mild steel angle of suitable size and including pepration of surface of steel surface & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge

Dismantling existing valve pit and M&L for construction of valve pit having inside dimensions 450X450X450 mm comprising of mild steel sheet cover of size 3.0mm thick fitted on mild steel angle 40 mm x 40 mmx 6 mm size with hinges and locking arrangement including painting with 2 coats of synthetic enamel paint over a coat of red oxide primer and coping with PCC 1 : 2 : 4 type B-1 and brick work with sub class 'B' in cement mortar 1 : 4, internal plastering 15mm thick in cement motar 1 : 3 finished even and smooth without using extra cement and two coats of white wash to internal surfaces of valve pit including preparation and PCC 1:3:6 type C2 as in foundation all as per existing pattern complete all as specified and directed by Engineer-in-Charge.(Note-Cost of earth work and dismantling of damaged valve pit shall be deemed to be included in quoted rate of item.)

Dismantling existing valve pit and M&L for construction of valve pit having inside dimensions 600 x600x600 mm comprising of mild steel sheet cover of size 3.0mm thick fitted on mild steel angle 40 mm x 40 mmx 6 mm size with hinges and locking arrangement including painting with 2 coats of synthetic enamel paint over a coat of red oxide primer and coping with PCC 1 : 2 : 4 type B-1 and brick work with sub class 'B' in cement mortar 1 : 4, internal plastering 15mm thick in cement motar 1 : 3 finished even and smooth without using extra cement and two coats of white wash to internal surfaces of valve pit including preparation and PCC 1:3:6 type C2 as in foundation all as per existing pattern complete all as specified and directed by Engineer-in-Charge.(Note-Cost of earth work and dismantling of damaged valve pit shall be deemed to be included in quoted rate of item.)

Dismantling existing valve pit and M&L for construction of valve pit having inside dimensions 900 x900x900 mm comprising of mild steel sheet cover of size 3.0mm thick fitted on mild steel angle 40 mm x 40 mmx 6 mm size with hinges and locking arrangement including painting with 2 coats of synthetic enamel paint over a coat of red oxide primer and coping with PCC 1 : 2 : 4 type B-1 and brick work with sub class 'B' in cement mortar 1 : 4, internal plastering 15mm thick in cement motar 1 : 3 finished even and smooth without using extra cement and two coats of white wash to internal surfaces of valve pit including preparation and PCC 1:3:6 type C2 as in foundation all as per existing pattern complete all as specified and directed by Engineer-in-Charge.(Note-Cost of earth work and dismantling of damaged valve pit shall be deemed to be included in quoted rate of item.)

Dismantling existing valve pit and M&L for construction of valve pit having inside dimensions 1200x1200x1200 mm comprising of mild steel sheet cover of size 3.0mm thick fitted on mild steel angle 40 mm x 40 mmx 6 mm size with hinges and locking arrangement including painting with 2 coats of synthetic enamel paint over a coat of red oxide primer and coping with PCC 1 : 2 : 4 type B-1 and brick work with sub class 'B' in cement mortar 1 : 4, internal plastering 15mm thick in cement motar 1 : 3 finished even and smooth without using extra cement and two coats of white wash to internal surfaces of valve pit including preparation and PCC 1:3:6 type C2 as in foundation all as per existing pattern. complete all as specified and directed by Engineer-in-Charge. (Note-Cost of earth work and dismantling of damaged valve pit shall be deemed to be included in quoted rate of item.)

S&F in replacement 15mm bore Stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement 20mm bore Stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement 25mm bore Stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement 40mm bore Stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement 50mm bore Stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 50 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in - Charge.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 80 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in - Charge.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for100 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in - Charge.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 150 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in - Charge.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 200 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in - Charge.

Taking up or down CI pipe with connections of size 300 mm bore complete all as specified and directed by Engineer-in-Charge.

Taking up or down CI pipe with connections of size 200 mm bore complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections of size 150 mm bore complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections of size 100 mm bore complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections of size 80 mm bore complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections of size 50 mm bore complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections of size 40 mm bore complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections of size 25 mm bore complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections of size 20 mm bore complete all as specified and directed by Engineer-in-Charge.

M&L for galvanized steel water tubing "medium grade" of 20mm bore with & including all fittings complete, laid in trenches, complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing "medium grade" of 25mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing "medium grade" of 40mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing "medium grade" of 50mm bore with & including all fittings complete, laid in trenches, complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing "medium grade" of 80mm bore with & including all fittings complete, laid in trenches, complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing "medium grade" of 100mm bore with & including all fittings complete, laid in trenches complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing "medium grade" of 150mm bore with & including all fittings complete, laid in trenches complete all as specified and directed by Engineer - in - Charge.

M&L for laying ductile iron pipe spigot & socketed size 300 mm dia, class K-9 including rubber tyton joints duly ISI marked complete all as specified and as directed by Engr-in-Charge.

M&L for laying ductile iron pipe spigot & socketed size 200 mm dia, class K-9 including rubber tyton joints duly ISI marked complete all as specified and as directed by Engr-in-Charge.

M&L for laying ductile iron pipe spigot & socketed size 150 mm dia, class K-9 including rubber tyton joints duly ISI marked complete all as specified and as directed by Engr-in-Charge.

M& L for excavation and making proper space to rectify the leakage of cast iron pipe of size 300 mm to 400 mm bore spigot and socked end inclduing all required material to rectifiy the leakage complete all as specified and directed by Engineer-in-Charge

M& L for excavation and making proper space to rectify the leakage of cast iron pipe of size 150 mm to 200 mm bore spigot and socked end inclduing all required material to rectifiy the leakage complete all as specified and directed by Engineer-in-Charge

S&F, in replacement, MS work of required size/shape with all additional joinery/fabrication items and colour on complete all as specified and directed by Engineer-in-Charge.

M&L for boring of size 80mm bore under pathways/roads suitable for laying of pipeline of size upto 80mm complete all as specified and directed by Engineer-in-Charge.

M&L for boring of size 150mm bore under pathways/roads suitable for laying of pipeline of size from 100mm to 150 mm complete all as specified and directed by Engineer-in-Charge.

Periodical cleaning i.e. drainout of water and removing of sludge (appx 0.10 m thick layer of sludge) and cleaning of balancing tank of capacity appx 0.7 Lakh imperial gallons and removal of sludge to a distance not less than 50 m from the tank including scrapping off the stuck dirt/dust from the tank wall and cleaning with suitable chemical complete all as specified and directed by Engineer-in-Charge.

M&L replacement of special white quartz filter media of the 1/32 inch to 1/16 inch grades/sizes suitable for vertical type quartz sand dished ends filter of cap appx 180000 litres per hour of approx dia 2 metre complete all specified and directed by Engineer-in-charge.

M&L replacement of special white quartz filter media of the 1/6 inch to 1/8 inch grades/sizes suitable for vertical type quartz sand dished ends filter of cap appx 180000 litres per hour of approx dia 2 metre complete all specified and directed by Engineer-in-charge.

M&L replacement of special white quartz filter media of the 1/8 inch to 1/4 inch grades/sizes suitable for vertical type quartz sand dished ends filter of cap appx 180000 litres per hour of approx dia 2 metre complete all specified and directed by Engineer-in-charge.

M&L replacement of special white quartz filter media of the 1/4 inch to 1/2 inch grades/sizes suitable for vertical type quartz sand dished ends filter of cap appx 180000 litres per hour of approx dia 2 metre complete all specified and directed by Engineer-in-charge.

M&L replacement of special white quartz filter media of the 1 inch to 1.5 inch grades/sizes suitable for vertical type quartz sand dished ends filter of cap appx 180000 litres per hour of approx dia 2 metre complete all specified and directed by Engineer-in-charge.

S&F in replacement tyre coupling suitable for centrifugal pumping set Model No-SP6L Kirloskar complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement post top lantern LED type 60/70 Watt including fixing arrangments on 76 mm dia GI pipe on main gate pillers 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.complete all as specified and directed by engineer in charge.

Supply only gland packing rope size 10 mm complete all as specified and directed by Engineer-in-Charge.

Supply only gland packing rope size 11 mm complete all as specified and directed by Engineer-in-Charge.

Supply only gland packing rope size 12 mm complete all as specified and directed by Engineer-in-Charge.

S&F in repairs and testing voltage transformer of capacity 100 VA, suitable for under pool light 12 volts DC & suitable for open mounting to existing frame complete with accessories and fittings with electric connections complete all as specified and as directed by Engr-in-Charge.

M&L repair of sluice valve 200mm bore including replacement of minor parts including glands, worn out nuts, botls, machining/fabrication work of spindle complete all as specified and directed by Engineer-in-Charge.

M&L repair of sluice valve 150mm bore including replacement of minor parts including glands, worn out nuts, botls, machining/fabrication work of spindle complete all as specified and directed by Engineer-in-Charge.

M&L repair of reflux valve 150mm bore including replacement of disc with rubber, machining of valve seat including required brass filling complete all as specified and as directed by Engineer in charge.

S&F in replacement underwater pool lights having size approx 300mm dia X 40 mm thick sleek suitable for working on 12 volts AC/DC supply suitable for wall mounting inside swimming pool a IP 68 protected complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement pool jets as existing shape and size complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement suction sweeper complete assembly size approx 750 long & 200 mm suitable for cleaning of olympic size swimming pool of size approx 50X25 meters as specified and as directed by Engr-in-Charge.

M&L repair/servicing of starter panel of size approx 120X120X45 cm including dismantling the panel from existing foundation, taking out all mountings including MCCBs, MCBs, starters etc disconnecting incomming and outgoing cables, replacement of voltmeters and ammeters, replacement of all copper and aluminium thimbles of any size, replacement of defective/damaged bus bar of existing size, replacement of all door locks, replacement of all indicator lamps, complete painting with quick-drying enamel paint standard ASA61 Medium Grey, replacement of burnt electrical connections, fitting back all mountings and electrical connections etc & fitting back the panel on new MS angle duly grouted on ground complete all as specified and as directed by Engineer-in-Charge. Note:- 1. Voltmeters, ammeter, MCCBs, MCBs shall be paid seperately under respective schedule of items. 2. Payment of minor items including copper and aluminium thimbles, defective bus bars, door locks, indicator lamps etc are deemed to be included in the quoted rates. 3. MS work for making angle shall be paid seperately under respective schedule of item. 4. Grouting work including PCC work is deemed to be included in the quoted rate.

S&F in replacement, cast iron non return valve /reflux valve with rubber seat flanged type without bypass arrangement PN 1.6 rating confirming to IS:5312/2004 of size 150 mm dia complete with gasket, nut, bolts and washers etc as required at site complete all as specified and directed by Engineer-in-charge

S&F in replacement MCCB 3 Pole, 415 V, fixed type, 25 to 100 Amps with breaking capacity 16 KA complete all as specified and directed by Engineer-in-Charge.

S&F in replacement MCCB 3 Pole, 415 V, fixed type, 160 Amps with breaking capacity 36 KA complete all as specified and directed by Engineer-in-Charge.

S&F in replacement MCCB 3 Pole, 415 V, fixed type, 200 Amps with breaking capacity 36 KA complete all as specified and directed by Engineer-in-Charge.

S&F in replacement MCB TPN 415 V, fixed type, 16-32 Amps with breaking capacity 10 KA type C curve complete all as specified and directed by Engineer-in-Charge.

S&F in replacement MCB TPN 415 V, fixed type, 40-100 Amps with breaking capacity 10 KA type C curve complete all as specified and directed by Engineer-in-Charge.

S&F in replacement PVC flexible nylon braided pipe heavy duty with fittings 50 mm dia complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking up self priming centrifugal pump (coupled with 25 HP 3 phase elect motor) capacity 180000 LPH, 20 Mtr head, 1410 RPM, SP6L from the existing foundation. Service/repair the unserviceable pump including necessary facing, grinding, turning, filling and replacement of bearings with greasing, resetting and machining of shaft including filling work, replacement of gun metal bearing bush, sleeves and studs and reassembling and fixing to its original position, making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-Charge. Note :- 1. Replacement of bush, bearings, sleeves and studs are deemed to be included in the quoted rate.

Disconnecting electric connections, taking up squirrel cage induction electric motor 415/440V, 50 Hz of capacity 25 HP from the existing foundation, Transportation to workshop for repair & rewinding with super enamelled copper winding wire of existing gauge and weight, varnishing and drying complete. Reassembling, bringing back to the installation, making the same functional after re-fixing at the existing location, testing the motor on full load complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted surfaces of any description or girth and applying spray painting with two coats of synthetic enamel paint of desired colour on MS/CI/GI pipe, gates, angles,panels, misc items etc of any size complete all as specified and directed by Engineer-in-Charge.

S&F in replacement CI sluice valve class PN -1.0 ISI marked complete suitable for 200 mm bore of pipe with flanged ends and drilled steel spindle CI gate with brass ring and cast iron cap etc complete all as specified duly fixed at site with rubber flanges, nuts / bolts and washers including repair to disturbed surfaces and testing on completion complete all as specified and directed by Engineer-in-Charge

S&F in replacement CI sluice valve class PN -1.0 ISI marked complete suitable for 150 mm bore of pipe with flanged ends and drilled steel spindle CI gate with brass ring and cast iron cap etc complete all as specified duly fixed at site with rubber flanges, nuts / bolts and washers including repair to disturbed surfaces and testing on completion complete all as specified and directed by Engineer-in-Charge

S&F, in replacement, MS work of required size with all additional joinery items and colour on all complete as specified and directed by Engineer-in-charge.

M&L in repairs PCC 1:3:6 (40mm graded stone aggregate) type C2, in foundation of posts and struts complete all as specified and directed by Engineer-in-Charge.

S&F in replacement 45 W IP 66 LED security light luminaire comprising of epoxy powder Die-cast aluminium housing with weather proof gasket for lamp & driver compartment with system wattage of 100 W . The LED must be of 120 degree view angle, > 110 lumen/ watt, lumen maintenace > 70% at 50000 hrs, color temperature of 5000-6500K, >70 color rendering and LM 80 test compliance complete all as specified and directed by Engineer-in-Charge

Priming of centrifugal pump (coupled with 25 HP 3 phase elect motor) capacity 1,80,000 LPH, 20 metre head, 1450 RPM, type-SP6L with suitable suction pump or manually complete all as specified and as directed by Engineer-in-Charge.

Supply only nut, bolts, studs and misc fastners suitable for pumpsets, DI/CI pipe flanges of any size as specified and as directed by Engr-in-Charge.

S&F in replacement Over load relay suitable for BCH starter panel for three phase 25 HP induction motor including fitting complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement, 4 pole AC power contactors, 415 volt rating coil, BCH-NHD series, suitable for 25 HP, 3 phase electric motor starter complete all as specified and directed by Engineer-in-charge.

S&F in replacement, direct on line citation motor starter 415 V coil stuitable for 2 HP to 7.5 HP motors, overload realy range-2.4-3.8 Amp, complete with SS enclosure complete all as specified and directed by Enginner-in-Charge.

Supply only jute breaded rope approx 25mm dia suitable for handing heavy equipments of weight upto 500 kg complete all as specified and directed by Enginner-in-Charge.

Suplly only swimming pool rubbish cleaning net skimmer rake mesh deep bag net wit pole of length 18 inches complete all as specified and directed by Enginner-in-Charge.

Periodic maintenance of centrifugal pumpsets of cap25 HP model SP6I, Kirloskar including replacement of glands, worn nut/bolts, tightening of losedn fasteners, alignment of pump motor shaft replacement of worn out shaft key etc complete all as specified and directed by Enginner-in-Charge.

M&L in repair pumpsets of capacity 1 HP o 3 HP including replacement of bearings, replacement of bush, minor machining/fabrication work, replacement of gland packing complete all as specified and directed by Enginner-in-Charge.

Taking down existing unserviceable Security light , of any capacity / size from existing pole , for replacement of unsv fitting complete including checking of Electric circuit for Security lights , sporting driver , LED panel plate complete all as specified & directed by Engineer in charge. Note:contracto ,s supervisor will receive complaint each working day from complaint cell JE E/M & will rectify the total no of complaints given to him the same day & feedback to JE E/M daily evening and taking sign of JE on repaired record register . failing which a recovery of Rs 20 per day / light will be made ,contractor will deploy electricion / helper will be made on the account contractor will ensure all safety accesseries , T&P will be provide to the labour employed by the contractor . repaired record register will maintain daily basis and signed by JE weekly. Spares will be measured and paid separately) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing on existing taking down from Security light fitting from pole with replacement of New suitable LED plate module capacity 40 to 50 watt and support to existing light ie Havells,crompton,Philips,Bajaj,polycab, Syska etc and existing light make to serviceable with 01 years replacement warranty complete all as specified and directed by Engineer-in-Charge.

Supply and fixing on existing taking down Security light fitting from pole with replacement of New suitable LED plate module capacity 60 to 75 watt and support to existing light ie Havells,crompton,Philips,Bajaj, polycab, Syska etc and existing light make to serviceable with 01 years replacement warranty complete all as specified and directed by Engineer-in-Charge..

Supply and fixing on existing taking down Security light fitting from pole with replacement of New suitable LED plate module capacity 120 to 180 watt and support to existing light ie Havells,crompton,Philips,Bajaj,Syska , polycab etc and existing light make to serviceable with 01 years replacement warranty complete all as specified and directed by Engineer-in-Charge..

Supply and fixing on existing taking down Security light fitting from pole with replacement of New LED Security light driver capacity 40 to 50 watt and support to existing light circuit/ luminius ie Havells,crompton,Philips,Bajaj, polycab,Syska etc and existing light make to serviceable with 01 years replacement warranty.Note-LED driver to be measured as per light wattage description not as per light compartment complete all as specified and directed by Engineer-in-Charge..

Supply and fixing on existing taking down Security light fitting with replacement of New LED Security light driver capacity 60 to 75 watt and support to existing light circuit/ luminius ie Havells,crompton,Philips,Bajaj, Syska, polycab etc and existing matched LED light make to serviceablto requirye with 01 years replacement warranty. Note :- If LED driver to be fitted in lieu of ovr driver not deemed to be queted. Note-LED driver to be measured as per light wattage description not as per light compartment complete all as specified and directed by Engineer-in-Charge.

Supply and fixing on existing pole from Security light fitting from pole with replacement of New LED Security light driver capacity 120 to 180 watt and support to existing light circuit/ luminius ie Havells,crompton,Philips,Bajaj, Syska, polycab etc and existing light make to serviceable with 01 years replacement warranty.Note-LED driver to be measured as per light wattage description not as per light compartment complete all as specified and directed by Engineer-in-Charge.

S & F in replacement, new generation energy saving & environmental friendly long life versatile pressure die cast aluminium IP67 roadway luminaire 45 watt with high power LEDs as light source and electric driver including PVC insulated three core 1.5 Sqmm FRLS multistranded Al conductor cable with connector for connection complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Endura Highbrite Energy saving, environmental friendly, long life exclusive innovative die- cast aluminium IP67 LED fiood light with high power LEDs as light source, suitable for highlighting architectural features 200 W LED complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Endura Highbrite Energy saving, environmental friendly, long life exclusive innovative die- cast aluminium IP67 LED fiood light with high power LEDs as light source, suitable for highlighting architectural features150 W LED complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement new genenation energy saving & enviormental friendly long life versatile pressure die cast aluminium IP-67 road way luminare 120 watts LED with high power LEDs as light source and electronic driver including testing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement new genenation energy saving & enviormental friendly long life versatile pressure die cast aluminium IP-67 road way luminare 70 or 72watts LED with high power LEDs as light source and electronic driver including testing complete all as specified and directed by Engineer-in-Charge.

M & L in replacement PVC insulated, PVC sheathed Aluminium conductor electric cable 2.5 Sq mm 3Core 1100 volts grade for existing Security light fitting on pole all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of GI pipe 50 mm bore light grade for protection of cable including provision of clamps, nut, bolts etc required for fixing pipe along pole / wall / laid under the road / laid under the floor or in trenches complete all as specified and directred by Engineer-in-Charge.

M&L for boring of holes 50 mm under road/pavement/hard standing or any other situation by manual mean and making good both the ends complete all as specified and directed by Engineer-in-Charge. . Note : Pipe and cable will be measured and paid separately

M&L for preparation of old surface of steel tubular pole any size and type of poles and applying two coat aluminium paint over red oxide primer and applying two coats of synthetic enamel paint with black & white or yellow colour strips 30cm each up to 1.5 mtr height from top of PCC foundation block and numbering of poles with synthetic enamel paint white in 80 mm high letters 150 mm above the top strip complete all as specified and directed by Engineer-in-Charge.. Note :- Numbering of pole should be match with Security light record register

S& F Security light bracket made out of 32/40 mm dia GI tubing medium grade made to Shape 1.5 mtr long with fixing arrangement for LED fitting duly painted with two coats of synthetic enamel paint over a coat of primer zink MS clamp and back plates fabricated from steel section and nuts , bots washers etc complete all as specified and directed by Engineer-in-Charge.

S & F in replacement pole box with fuse/MCB provision and suitable connector for single phase connections loop in and out 10 to 16 Sqmm 2 core/4 core aluminium armoured cable branch out 2.5 Sqmm single core copper PVC insulated cable enclosed in a thermoplastic polysterene/polycarbonate enclosure which shcould be shock proof safe IP 66/67 weather proof, rust proof, dust proof, water proof, flame retradant glow wire test at min 750 C internally embeded gasket with provision for cable entry through IP 66/67 thermoplastic metric size glands and / or grommets enxlosure size (155 mm x 210 mm x 92 mm) including taking down the old unsv pole mounting box.complete all as specified and directed by Engineer-in-Charge.

S&F in replacement motor for high mast light of suitable cap in 1 HP including repair to which to lift and lower the high mast light including arrangement for replacement of pinion/gear box, chain etc to make the high mast light servicable complete all as specified and directed by Engineer-in-Charge.

S&F in replacement steel wire rope min 6 mm dia for high mast light to make the high mast light servicable complete all as specified and directed by Engineer-in-Charge.

M & L in replacement PVC insulated, PVC sheathed copper conductor electric cable 2.5 Sq mm 5 core 1100 volts grade for existing high mast light fitting all as specified and directed by Engineer-in-Charge.

Supply and fixing pole mounting box of size 205 x255x112 mm, shockproof, dustproof, wheatherproof, including pole mounting arrangement such as clamp made of MS flat 3x25mm size & nut bolts and washer, four way connector suitable for three phase supply, MCB SP 2.5A B cure, as per IS 10192 including taking down the old unservicable pole mounting box complete all as specified and directed by Engineer-in-Charge.

S & F in replacement Security light timer, Three phase for 5 KW light load comprising of nature switch, contactor and MCB housed in a pole mountable enclosure complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old surfaces of GI poles of any length and applying two coat of aluminium paint complete, including scrapping of old painted surface and one coat of red oxide paint all as specified and directed by Engineer-in-Charge. Note :- Numbering of pole should be match with Security light record register

M & L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried in ground (earth pit not less than 2.25 Mtr deep below normal ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level, connecting to the Galvanised iron earth lead 32 x 6 mm size by means of bolts, nuts check nuts and washers of galvanised iron and 32 x 6 mm GI earth lead protection by provision of GI medium grade pipe 40 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20mm graded stone aggregate with 40mm thick cover of RCC (1:2:4) reinforced with XPM (wieght not less than 4gs/Sqm) and frame of angle iron 25mm x 25mm x 6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm x 8 mm FI with fixing arrangements, funnel, wire mesh and earth work in hard dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 Mtrs all as per electrical Plate No.3 of SSR Part I and connecting to earth test point all as specified or indicated including testing on completion complete all as specified and directed by Engineer-in-Charge.

M & L for sand cushioning with dry coarse sand to under ground cable 23 cm thick, 8 cm thick below the cable and 15 cm thick after laying the cable complete all as specified and directed by Engineer-in-Charge. Note : Thickness after punning shall be considered for payment.

M & L for brick protection with old size sub class 'B' bricks laid flat , length of bricks across the route of underground cable complete all as specified and directed by Engineer-in-Charge.

M & L in replacement PVC insulated, armoured heavy duty electric cable with multi-stranded aluminium conductor 1100 volts grade cross sectional area 10 sqmm 2 core complete all as specified and directed by Engineer-in-Charge.

M & L in replacement PVC insulated, armoured heavy duty electric cable with multi-stranded aluminium conductor 1100 volts grade cross sectional area 10 sqmm 4 core complete all as specified and directed by Engineer-in-Charge.

M & L in replacement PVC insulated, armoured heavy duty electric cable with multi-stranded aluminium conductor 1100 volts grade cross sectional area 16 sqmm 4 core complete all as specified and directed by Engineer-in-Charge.

M & L in replacement PVC insulated, armoured heavy duty electric cable with multi-stranded aluminium conductor 1100 volts grade cross sectional area 25 sqmm 4 core complete all as specified and directed by Engineer-in-Charge. (i) Excavation & earth work shall be measured and paid separately under respective item of this Schedule complete all as specified and directed by Engineer-in-Charge.

Taking down existing unserviceable gate light /garden light/GI pipe with post light fitting complete all as specified and directed by Engineer-in-Charge.

Supply and fixing on existing pole from LED garden light with replacement of New LED garden light capacity 08 watt and support to existing light ie Havells,crompton,Philips,Bajaj etc and existing light make to serviceable with 01 years replacement warranty complete all as specified and directed by Engineer-in-Charge.

Supply and fixing on existing pole from LED bollard light with replacement of New LED bollard light capacity 35 watt and support to existing light ie Havells,crompton,Philips,Bajaj etc and existing light make to serviceable with 01 years replacement warranty complete all as specified and directed by Engineer-in-Charge.

Comprehensive maintenance and servicing of 210 KW SPV plant at KSPR of solar module of capacity 330 wp each. The job includes as under;- (i) Checking, & replacement of faulty 4/6 Sqmm DC Cables. (ii) Checking & replacement of faulty MC4 connector and DC circuits. (iii) Checking & Replacement of Earthing Cable & LA, LA Wire- 4/6 Sqmm for the protection of plant from surges. (iv) Checking & replacement of communication cable connecting inverter, modules and DC circuits (v) DC cable dressing using UV Protect Cable Tie for the DC cable and Chemical Fasteners – FOSROC, PVC/GI Saddles. (vi) Checking and replacement or repairing of AC Cable from Inverter / ACDB to Control panel. (vii) Checking and tightening of Solar panels Structures. (viii) Checking and tightening of Solar panels (ix) Servicing and Cleaning of ACDB and DCDB and Control panels. (x) Checking and testing of earthing and earthing pits and top Note;-(a) Items reqd for replacement shall be measured and paid separately. (b) Servicing to be carried out by specialized agency of Solar critical installation.

Supply only 4/6 Sq MM DC Cable complete all as specified and directed by Engineer-in-Charge.

Supply only MC4 connector and DC circuit complete all as specified and directed by Engineer-in-Charge.

Supply only communication cable complete all as specified and directed by Engineer-in-Charge.

Supply only UV Protect Cable Tie complete all as specified and directed by Engineer-in-Charge.

Replacement of damaged modules of 325/330 wp of Indian reputed make, DCR and ALMN approved by MNRE (including Material & labor for dismantling of damaged module and installation and connecting, testing etc of new modules in the existing series.)

Comprehensive maintenance and servicing of 210 KW SPV plant at KSPR for inverter capacity 3 Nos 50 KW and 2 Nos 30 KW separately. The job includes as under;- i) inspection and cleaning of all terminals of Inverters. ii) Testing & examinations of all parameters like volt, DC AC Current at all strings. iii) Inspection of control panel to check for warning messages or error codes display to find problem with the system’s components or indicators of potential failure. iv) Cleaning of air intake Filter v) Checking & Inspection of the cooling fan to ensure working properly, removal of dust build-up on fan, Checking of malfunctioning such as noise, vibration or poor air flow from vents in the system’s housing unit etc vi) Adjustment of drive parameters vii) Examine / Inspection of wiring connections for any exposed wires that could lead to short circuits due to direct contact between conductors carrying different voltage levels in your system’s components. viii) Testing of proper installation / checking of brackets are securely fastened at all points and properly installed — including around frames, mounting posts and rails. ix) Testing and examinations of faulty or burned SPD/ IGBT/Mother Board etc. x) Updating of Software Note;-(a) Items reqd for replacement shall be measured and paid separately. (b) Job are separately for each inverter (c) Servicing to be carried out by specilized agency of Solar critical installation.

Supply and Installation of faulty / burnt SPD complete all as specified and directed by Engineer-in-Charge.

Supply and Installation of faulty/ burnt cooling fan complete all as specified and directed by Engineer-in-Charge.

Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

HARSH CONSTRUCTION CO.

Aggarwal brothers and company

AYUSH BUILDERS