REPAIR/MAINT OF MISC FURNITURE FOR OFFICERS MD ACCN SHANKAR VIHAR UNDER BSO OF GE (SOUTH) DELHI CANTT-10

Amount

A) Removal of following existing unserviceable wooden components of various MES F/DB/FD/MAP furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing everypart in-tact the disturbed portion, as applicable as per drgs and as directed by EIC. B) Work will be executed where the furniture exist in different User Units of GE (South) Delhi Cantt including BSO's Furniture Yard as directed by Engineer-in-Charge. C) Timber shall be of 2nd class HW for frames and teak wood for beading. CRCA section/CRCA sheet shall be used in repair/maint of steel furniture.

Drg No.FD-277/384, FD-273/376/ MAP-II/03, FD/MAP-II/01, FD-274, FD-275, FD/E6/MAP/ 09, FD-1112, FD-382 and similar drgs

Top/sides all type made of 16 mm thick MDF Board (Exterior Grade) with 0.8 mm thick laminate in colour/shade as approved by EIC/GE and balancing white laminate 0.8 mm thick with 2 mm thick PVC edging all around fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg or as directed by EIC.

Table dinning 06/08/04 person (Drg No. FD-376,273, FD/MAP-II/03 & similar type)

Teak wood corners for legs as per sample rest all as directed by EIC/GE. Note : Each corner shall be measured seperately.

Top long rail as per drg

Top short rail as per drg

Legs as per drg

Shoe as per sample

Table writing : (Drg No.FD-33, 275, DB-3982 or similar type)

Teak wood corner for legs as per sample rest all as directed by EIC/GE. Note : Each corner shall be measured seperately.

Legs as per drg complete with shoes

Foot rest as per drg

Stiffener side as per drg

Complete cabinet body except drawer /shutter with 18 mm thick prelaminated MDF Board (Exterior Grade) colour as approved by EIC/GE with PVC edging all as per drg and specified.

Back of table writing made out of 12 mm thick prelaminated MDF (Exterior Grade) OSL colour as approved by EIC/GE all as per drg and specified.

Drawer made of 18 mm thick prelaminated MDF (Exterior Grade) OSL with 0.8 mm thick PVC edging through edge bander machine of shade as approved by EIC/GE and bottom of drawer made out of 12 mm thick pre-laminated MDF Board (Exterior Grade) complete with knobs & telescopic channelcomplete. Rest all as per drg.

18 mm thick prelaminated MDF (Exterior Grade) OSL of shade as approved by EIC/GE for Cabinet door/shutter along with knobs, magnetic catcher & SS Piano type hinge complete rest all as per drg and as directed by EIC.

Peg Table : (Drg No.FD-277/384, DB-3973)

Legs as per drg.

Top long rail as per drg.

Center stiffener as per drg.

Teak wood corner for legs as per sample rest all as directed by EIC/GE.

Shoe as per sample

Table Centre : (Drg No.FD-274/235)

Legs as per drg

Top long rail as per drg.

Center stiffener as per drg.

Teak wood corner for legs as per sample.

Shoe as per sample.

Teapoy : (Drg No.FD-278, 34, 382)

Center Stiffener as per drg.

Legs as per drg

Teak wood corners as per drg.

Shoe as per sample

Hat stand : (Drg No.FD-233 & Similar drg.)

S&F 35mm wide and 6mm thick teakwood beading all round.

S&F 4mm teak ply on front and 4mm commercial ply on back side of hat stand

Mirror with other components as per drg.

Brass pegs as per sample

Sofa set 4/5 seater : (Drg No.FD-281, 373, FD/MAP-II/02)

Legs as per drg

Arm rest as per drg

Seating Frame members front, back sides as per drg for single seater sofa

Seating Frame members front, back sides as per drg for three seater sofa

Wooden batten as per drg

Cushion complete as per shape and size ref in drg with 40 dennsity PU foam of size 22”X21”X4" with upholstery of suede tapestry cloth of range not less than Rs. 350/mtr (make-as per sample) colur and shade & quality and providing a chain best quality (at either of 21" side) as approved by EIC/GE.

Table Bed Side : (Drg No.FD-276/248//FD/E6/MAP/15 R)

Small Drawer made of 18 mm thick prelaminated MDF (Exterior Grade) OSL of shade as approved by EIC/GE with 0.8/2 mm thick PVC edging in front, back & sides and bottom of drawer made of 12mm thick prelaminated MDF (Exterior grade) OSL complete with Teliscopic Channel & SS Handle complete all as per drg.

Large Drawer made of 18 mm thick prelaminated MDF Board (Exterior Grade) OSL of shade as approved by EIC/GE with 0.8/2 mm thick PVC edging in front, back & sides and bottom of drawer made of 12mm thick prelaminated MDF Board (Exterior Grade) OSL complete with Teliscopic Channel & SS Handle complete all as per drg.

Frame painted with two coat of enamel paint including replacement of unsv shoes and welding wherever required complete and with both side bottom stiffner as per existing frame size irrespective of what is existing/drg and as directed by EIC

Back side of table bed side made of 12mm thick prelaminated MDF Board (Exterior Grade) as per drg.

Sides/Top/Shelves made of 18 mm thick prleminated MDF Board (Exterior Grade) of shade as approved by GE/EIC with 1.6 mm thick pvc edging through by hot pressed machine complete incl 12mm thick MDF (Exterior grade) OSL for back side of bed side table. All Fabrication arrangement of parts shall be with PVC/MS corner all as per drg FD-276 or as directed by EIC.

Table computer : (Drg. No. FD/E6/MAP/ 01/TP)

Complete key board with side board made of 18 mm thick Prelaminated MDF (Exterior Grade) OSL with telescopic channel with 2 mm thick PVC beading complete rest all as per drg & as directed by EIC

Complete mouse board made of 18 mm thick Prelaminated MDF (Exterior Grade) OSL with telescopic channel with 2 mm thick PVC beading complete all as per drg & as directed by EIC.

Complete drawer made of 18 mm thick Prelaminated MDF (Exterior Grade) OSL with telescopic channel and edges surrounded with 2 mm thick PVC beading complete rest all as per drg & as directed by EIC.

Stool dressing : (Drg No.MAP/FD)

Complete seat with 12mm thick Plywood BWR alongwith PU foam cushion having 40 Density and tapesrty cloth as approved by EIC/GE of rate not less than Rs 250/RM complete as per Drg and as directed by EIC.

Legs as per drg.

Bed Hard Steel : (Drg No.FD/E6/MAP/8(R)}

12mm thick plywood top BWR grade as per existing shape and size with complete rest all as per drg as directed.

Hard rubber shoe std quality as per drg

Welding work wherever required as directed by EIC

S&F 18 mm thick prelaminated MDF Board (Exterior Grade) on head rest & foot rest with PVC beading complete rest all as per drg and as directed by EIC. Note:- Board of head and foot rest shall be measured as one unit

Side Board/Binsoiled linen multipupose : (Drg No.FD-1112, 26/241/ FD/E6/MAP/ 09)

Back of side board/binsoiled linen made up with 12mm thick prelaminated MDF Board (Exterior Grade) OSL colour as approved by EIC/GE all as per drg and specified.

Door shutter made of with 18 mm thick prelaminated MDF Board (Exterior grade) OSL of shade as approved by EIC/GE with 2 mm thick PVC edging and fixed with sides of frame with suitable size piano type hinges including SS handle as approved by EIC.

Drawer made of 18 mm thick prelaminated MDF Board (Exterior Grade) OSL of shade as approved by EIC/GE with 0.8 mm thick PVC edging and bottom of drawer made up with 12 mm thick prelaminated MDF Board (Exterior grade) complete with telescopic channel & SS handle as per sample all as per drg.

Legs with frame complete as per drg or as directed by EIC

AlmirahLarge/Medium/Small Steel : {Drg No.FD-1031/1032/FD-104(m)}

6 lever locks as per drg.

CP Handle as per sample/as per drg

Legs as per drg

Repairs to door as specified including replacement of hinges

Shelf as per drg

Bed Ply top : (Drg No.FD-246/247)

Teak face ply 3.5 mm thick on both side of head rest/foot rest with half round Tw beading and top beading complete as per drg

Long rail as per drg

Ply top 12 mm thick BWR Grade rest all as per drg.

Stiffner as per drg

Charpoy IP folding : {Drg No.FD-388 (R)}

08 mm thick plywood top BWR grade as per existing shape and size with shunken nut/bolts complete rest all as drg and as directed

Hard rubber shoe std quality as per drg

Welding work wherever required with FI as directed by EIC

Chair Dining officers/JCO/OR's : (Drg No.FD-279 MAP)

Rear legs as per drg

Front Leg as per drg

Seating Frame members front, back sides as per drg

Bottom/Centre stiffener as per drg

Back strip as per drg

Chair Writing : (Drg No.FD-20/202/280)

Rear legs as per drg

Front Leg as per drg

Seating Frame members front, back sides as per drg

Bottom/Centre stiffener as per drg

Arm rest as per drg

Back strip as per drg

Chair Easy : (Drg No.FD-229/201/17)

Rear legs as per drg

Front Leg as per drg

Seating/back Frame members front, back,side rail as per drg

Arm rest as per drg

(Drg No.FD/MAP-II/04, FD/MAP-II/10)

Complete seat by using 12mm thick Plywood BWR and PU foam cushion of 40 Density on top with tapesrty cloth as approved by EIC/GE of rate not less than Rs.350/RM complete as per Drg and as directed by EIC.

(Drg No.FD-279, FD-229/ 201/17, FD-20/202/280)

Re-canning of Chairs in Godrej pattern with oval shape 2 mm wide new off plastic cane and 4mm wide at the edge make as approved by GE including taking out old canning complete all as shown on drawing including S&F pvc shoe to each legs complete all as specified and as directed

Chair Verandah : (Drg No.FD-19, FD-256, FD-359/MAP/11/MAP-II/15)

Hard rubber shoes as per drg and as directed by EIC

Welding wherever required complete all as specified and as directed.

Recanning the chairs with approved plastic cane 4mm wide half round as per Matt Pattern all as specified. (colour of cane shall approved by EIC/GE)

A) M&L for French Polish with high glosy finish after removing of existing polish by scrapping and smothening of surface by grinder wherever required as shown on drgs and as directed by Engr-in-Charge for the under mentioned items as applicable. B) M&L for painting two coat of synthetic enamel paint with shade as approved by EIC/GE over a coat of primer through spray machine, both internally & externally including removing of dust, dirts,dents etc and removing of existing paint both internally & externally, applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engr-in-Charge for the under mentioned items as applicable.

Bed Hard Steel : (Drg No.FD/E6/MAP/R)

Chair Dining : (Drg No.FD/MAP)

Chair Easy : (Drg No.FD-229/ 201/17)

Chair Writing : (Drg No.FD-20/202/280)

Hat Stand with Mirror : (Drg No.FD-233)

Peg Table : (Drg No.FD-277/ 384, DB-3973)

Side board /Bin soliled linen multipurpose : (Drg No.FD-26/241/MAP)

Sofa Set 5 seater : (Drg No.FD-281/373/MAP)

Stool dressing : (Drg No.MAP/FD-374)

Table dining 6/8/4 pers : (Drg No.FD-273,376/MAP or similar type drg.)

Table Bed Side : (Drg No.FD-276/248/FD/E6/MAP/15R)

Table Centre : (Drg No.FD-274/235)

Table wrtiting : (Drg No.FD-33,275,DB-3982 or similsr type)

Teapoy : (Drg No.FD-278, 34, 382)

Almirah Large Steel 1/2HX1/2S : {Drg No.FD-103/1032 (M)}

Almirah med steel : {Drg No.FD-104(M)}

Ladder

Bed plywood top : (Drg No.FD-246/247)

Chair Verandah : (Drg No.FD-19, FD-256, FD-359/MAP/11/MAP-II/15)

Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender

M/s Kapil Furniture

M/S Malik Construction Corporation

M/S NEHAL ENTERPRISES