REPAIRS TO KITCHEN CABINET, IRON DOOR, INTERNAL FINISHES,

Amount

Taking down of old /unserviceable kitchen cabinet / Cupboard incl all fixture and fittings. Note :- For measurement superficial area in elevation will be measured only.

S&F factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.One side prelam and other side plain 18mm thick Celuka PVC ply for kitchen cabinet and cupboards shutter and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing.

S&F factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 18mm thick Celuka PVC Ply for Shelf/Partitions/Drawer and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing.

S&F factory made 5mm thik PVC sheet of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 5mm thick PVC sheet paneling for back side(wall side) and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing.

S&F continous piano hinges,stainless steel, bright finish or electrogalvanised of width of flap 30mm

M &L for 50 mm magnetic catches and fixed complete all as specified and directed by Engr-in- Charge.

S&F 100mm Hasp and staple, safety type, with mild steel hinges pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr In Charge.

S&F 100 mm size Stainless Steel handle complete all as specified and as directed by Engr -in - Charge.

S & F in repair 25 mm dia anodised aluminium alloy with powder coated curtain rod complete all as specified and directed by Engr In Charge.

S&F for aluminium powder coated fancy type side bracket (Lattoo) for curtain rod complete all as specified and directed.

S&F wall bracket for drapery rod as per sample approved by Engr-in-Charge.

S&F stainless steel knobs complete all as specified and as directed

S & Fin repairs galvanised Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.

M&L framed work of Fe-410W (Gde E-250) quality B as in doors or gates of angle or other section wwith gusset plate, rails, braces etc, complete drilled for fixing of steel sheeting or other covering, door etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of stee, sheeting or other coverings, running rails and guides) and hanging: also fastening and fixing and making good the disturbed surface with PCC 1:2:4 incld dismantling complete all as specified and as directed by the Engr-in-Charge.

S&F mild steel, 1.00mm thick plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

Welding in repairs not exceeding 2.5 cm in length thickness of metal to be welded exceeding 6 mm but not exceeding 9 mm. Note:- Rate including taking down steel window or door chowkhat , ventilator frame and welded with Angel iron /MS Flat as required length and refix the same and making good disturbed area all as specified and directed by Engr-in Charge

Welding in repairs of ventilator window or other opening up to 4 Sqm including taking down steel window or door chowkhat , ventilator frame and welded with Angel iron /MS Flat with wire mesh complete up to 4 story as required length and refix the same and making good disturbed area all as specified and directed by Engr-in Charge

M&L for 18mm to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of stone slab complete all as specified and directed by Engr-in-charge.Note : Debris removed from site upto 20 Km outside of MOD land

Demolition reinforced cement concrete of roofs, floors (other than ground floors), beams, staircases, landing, chajjas, RCC Jali and similar suspended work (reinforcement cut as required to facilitate demolition) up to forth story Bldgs incl removingfrom site to out of defence land complete all as specified and directed by Engineer-in-Charge.

M&L Reinforced cement concrete nominal mix 1:2:4, type B-1 using (20mm graded aggreate) in slabs supported on walls, beams and column in floors,roofs,landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-In-Charge.

M & L formwork to chullah hoods, chajjas, slab, trough and similar items including edges finished rough surfaces of concrete complete all as specified and directed by Engr-In-Charge.

S& F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire(annealed) not less than 0.9mm dia complete all as specified.

Taking down steel tubing or removing from site of 15mm bore pipe all as specified and directed by Engineer-in-charge.

All as above item no. 23 but 20mm bore.

Demolition of brick work built in CM incl all quoins, pillars etc but excl ashlar facings, dressed stone work and precast concrete

M&L brick work with old size sub class B brick straight or curved on plan exc 6 m mean radius in half brick thick wall built in cement mortar in CM 1:4 complete all as specified and directed.

M&L for brick work with subclass B bricks, straight or curved on plan to any radius built in CM 1:6 complete all as specified and directed.

M&L for rendering CM (1:6) 10 mm thick on other than fair faces of brick work or concrete surfaces etc including finished even and smooth without using extra cement up to four storey height bldg complete all as specified and directed by Engr In Charge.

M&L rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth with using extra cement up to four storey height bldg complete all as specified and directed by Engr In Charge.

M&L for 15 mm thick cement plaster in cement mortar 1:6 on Bk surfaces on fair face of brick work and finished even and smooth w/o using extra cement including taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. raking out joints ,hacking for key and scrubbing down with water upto 4 storeys building complete all as specified & Directed by Engr-in-Charge.

M&L for 10 mm thick cement plaster in cement mortar 1:3 on concrete or brick surface and finished even and smooth w/o using extra cement as in ceiling including taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. raking out joints ,hacking for key and scrubbing down with water upto 4 storeys building complete all as specified & Directed by Engr-in-Charge.

M&L for preparation of new surface and applying two coat of white wash on ceiling all as specified and directed.

M&L for preparation of new surface and applying two coat of distemper on wall including 3 mm wall care putty complete all as specified and directed.

S&F 15mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.

All as per item no.34 above but 20mm bore

S&F in repairs pillar tap, fancy type,cast copper alloy, chromium plated, with capston heads screwed down, high pressure with or without lettered hot or cold with long screwed shames and fly nuts, screwed for 15mm bore pipe

M&L for Non-skid coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floors/wall etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over including 15 mm thick screed bead in CM 1:4, including dismantling of tiles complete all as specified and directed by Engr-in-Charge. Note : Debris removed from site upto 20 Km outside of MOD land

M & L for Glazed ceramic coloured tiles of size 350x 250x 7mm/ 450X 350X 7 thick on vertical surface such as in dado/skirting/risers to steps etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles and including 10 mm thick backing coat in CM (1:4) including dismantling of tiles complete all as specified and directed by Engr-in-Charge. Note : Debris removed from site upto 20 Km outside of MOD land

M&L for vitrified coloured ceramic tiles, 9 to 10 mm thick (Square/rectangular) area of each tile n.exceeding 0.36 sqm in floors/wall etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over 15 mm thick screed bead in CM 1:4, and including dismantling of tiles complete all as specified and directed by Engr-in-Charge. Note : Debris removed from site upto 20 Km outside of MOD land

All as per item No. 39 above but as in skirting/ dado etc with and including 10mm thick backing coat in cement mortar 1:4 an wall and including dismantling of tiles complete all as specified and as directed.Note : Debris removed from site upto 20 Km outside of MOD land

S&F in repair stainless steel sink with drainage board made out of 1mm thick sheet for kitchen or laboratory with plug, washer, waste pipe etc including cast iron brackets, connecting union over all size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete..

S&F in repairs vitreous china wash hand basin of size 550mm x 400mm white, flat back including angle iron brackets with two coats of synthetic enamel paints including PVC waste pipe of 32mm dia of suitable length, PVC connection of 15mm dia & 450mm long with PTMT nuts, and 32mm dia brass waste fitting complete all as specified.

S&F in repair vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, ‘P’ trap 110mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-charge.

S&F in repairs viterious china wash down water closet pan (Pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe)incl P or S trap etc all as specified.

S&F in repair PVC flushing cistern of 10 ltr capacity valveless, symphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including flush pipe of 32mm bore PVC and connection to pipes etc and taking down existing flushing cistern complete all as specified and as directed by Engineer-in-Charge.

S&F of plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete

S&F in repair 32mm bore PTMT waste coupling fixed to waste pipe and wash hand basin complete all as specified and as directed by Engineer-in-Charge.

S&F for 15mm bore PVC connection 450mm long with brass nuts on both ends complete all as spd

S&F in repair chromium plated shower rose 150 mm size with or without swivel joint and fixed for 15mm bore pipe.

S&F steel in repairs Grating doom 125 mm dia with waste hole or without hole complete all as specified and directed by EIC

S&F in repair 100mm bore PTMT sink waste coupling fixed to waste pipe and wash hand basin complete all as specified and as directed by Engineer-in-Charge.

M&L in replacement of PVC waste pipe 75mm long, 32/40 mm bore complete all as specified

S & F in repair PTMT long body bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe and fixed make - Polytuff /Paryag

M&L for prepration of old plastered or unplastered surfaces of walls and applying two coat of approved shade of oil emulsion distemper, including repairing of pot holes and cracks with putty,complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated surfaces of ceiling including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and two coat of approved shade of oil emulsion distemper, including repairing of pot holes and cracks with putty complete all as specified and directed.

M&L for prepation of old painted wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

Taking down frame or Chowkhats with shutters (without taking off shutters from the frames) of any description not exc. 1.50 Sqm each incl necessary repair to opening with CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

Taking down frame or Chowkhats with shutters (without taking off shutters from the frames) of any description exc. 1.50 Sqm not exc. 4.0 Sqm each incl necessary repair to opening with CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

Taking down Door shutter of any description exc. 1.0 Sqm but n exc 2.0 Sqm each incl necessary repair to opening with CM 1:4 complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides, complete as specified and as directed.

S & F for 35 mm thick factory made, 2nd class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, with out sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and as directed.

S&F for size 105x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, hold fast, lock strike plate, PCC 1:3:6 in side hollow section & hold fast etc., complete as specified,complete all as specified and directed by Engr In Charge.

S&F for size 125 x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, hold fast, lock strike plate, PCC 1:3:6 in side hollow section & hold fast etc. complete all as specified and directed by Engr In Charge.

M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide/ zinc chromate complete all as specified and directed by Engr In Charge.

M&L for preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, complete all as specified.

S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, complete all as specified and directed by Engr -in-Charge

S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 150 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.

S&F 100 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.

S&F aluminum alloy handles fabricated anodised of 150 mm long complete all as specified and directed. .

S&F aluminum alloy handles fabricated anodised of 100 mm long complete all as specified and directed. .

S&F aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed

S & F galvanised Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.

Supply and fixing windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513"D" quality) galvanised as per IS-277 with ZINC of 120GM/SQM . Windows /ventilators having frame suitable for dual shutter i.e. inner and outer shutter with grill, glazed shutter with 4.0mm thick glass, mesh shutter with 32 gauge stainless steel mesh, 6mmx12mm flat iron with 10mm square bar M.S. grill and all fitting, fixtures accessories complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(4000 series), complete all as specified and direted by Engr-in-Charge.Note : (i) Glazed shutter with 4.00mm thick glass, Mesh shutter with 32 gauge stainless mesh and M.S. grill as per Note above mentioned drawing deemed to be inclusive in the rate quoted for unit.(ii) Glass, stainless steel mesh will be fixed to window by authorised rep of manufacture of window only.(iii) Including 2 coats of synthetic enamel paint over a coat of red oxide complete.

Demolition of cement concrete in sunken portion in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-Charge. Note : Debris removed from site upto 20 Km outside of MOD land

M&L for providing and making fillet of cement concrete in 1:2:4 in sunken portion to maintain the slope towards the spout including applying the under mentioned course of sunkan treatement complete all as specified and directed by Engineer-in-Charge.:- (a) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply two coats of acrylic polymer modified elastomeric water proofing coating (mixture of liquid plymer component and a cementitous powder) as per manufacturers instruction to bottom and vertical sides up to finished floor level + 100mm height , the thicknes of each layer shall be 1 mm . when the second lyaer is still, sticky, coarse sand spray shall be carrried for the vertical and bottom surface. Plaster the bottom and sides up to bottom of the sunken slab portion with minimum 10mm thick cement mortar 1 : 4 mixed with integral water proofing compound as per manufacturers specifications including rounding of corners and junctions slopping towards spout. Note:- This treatement shall be done by the approved authorized applicators and guarantee of treatement shall be minimum 10 years complete all as specified and directed by Engr In Charge.

Refilling PCC 1:5:10 type E2 using 40mm stone aggregate, 300mm thick in the sunken with the help of proper tools & equipments & plants complete all as specified and as directed by Engineer-in-Charge.

Providing and making cement concrete in 40mm thickness in 1:2:4 type B0 (12.5mm graded aggregate) including mixing of Dr Fixit Pidiproof LW+. Complete in sunken upto the below level of tiling complete all as specified and as directed by Engineer-in-Charge.

Spply and fix 40mm dia GI pipe as spout in sunkan floors, medium grade etc complete all as specified and as directed.

Dismantling existing tanks capacity exc. 250 ltr but n.exc 500 ltr,and removing.

S&F rotational moulded vertical water storage tanks triple layers with closed tops ( cylinderical ) fix hoisted and in position 500 ltr capacity incl disconnecting and refixing the existing GI fitting and pipe complete all as specified and as directed.

S&F of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 20mm bore having weight not less than 210 gms complete all as specified.

Dismantling to brick tiles or terracing tiles single layers laid on roof including removing the mudfaska or any type upto 4 storeys building treatment including demolished materials removed from out side defence land complete all as specified and directed by Engineer-in-charge. Note : Debris removed from site upto 20 Km outside of MOD land

M&L for Cement Concrete 1:2:4 Type B-0 (using 12.5 mm graded stone aggregate) as in roof kerb or mud stops rounded of chamfered on edge complete upto 4 storeys building all as specified & Directed by Engr-in-Charge.

M&L for 55mm thick PCC 1:2:4, type B-1 using 20 mm graded stone aggregate laid as in roof padding without using extra cement complete upto 4 storeys building all as specified & Directed by Engr-in-Charge.

M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatement complete all as specified and directed by Engineer-in-Charge.:-(a) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface.(b) Applying evenly a tack coat of bitumen 85/25 grade @1.20 kg/ sqm.(c) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves up to 150mm ht of parapet wall etc. (d) Membrane bonded completely to the substrate & the over laps are then scaled/fused by flame. (e) Including taking down of existing roof treatment in any description i.e mud faska,bricks tiles ,APP etc. (f) including removing of all demolished material from out of MOD land.(g) including cement concrete tiles 20cmX20cmX20mm with over 15mm screed bed in CM(1:4) Note:- This treatement shall be done by the approved authorized applicators and guarantee of treatement shall be minimum 10 years complete all as specified and directed by Engr In Charge.

M&L for removing rotational moulded polyethylene water storage tanks any size or shape or capacity hoisted and refixed in same position including necessary fittings with 20 mm dia Ball brass valves, high pressure, with polythene float and flynut including other fittings complete all as specified and directed by Engr In Charge.

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engr In Charge.

S&F for 75 mm dia pvc pipe Stack clamps out of 50 mm by 5mm flat iron and 16mm dia round iron stays,enlcuding bolts and nuts and securing ends of stays to wall or roof as percomplete all as complete all as specified and directed by Engr In Charge.

S&F for 110 mm dia pvc pipe Stack clamps out of 50 mm by 5mm flat iron and 16mm dia round iron stays,enlcuding bolts and nuts and securing ends of stays to wall or roof as per complete all as specified and directed by Engr In Charge.

S&F for PVC SWR bends 110 mm complete all as specified and directed by Engr In Charge.

S&F PVC SWR bends 75 mm complete all as specified and directed by Engr In Charge.

S&F for PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts etc complete all as specified and directed by Engr In Charge.

All as per item no.95 above but 75 mm dia..

Taking down carefully copper/aluminium point wiring( light ,fan, socket or power) complete, fitting such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. Complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with single core of FRLS PVC insulated unsheathed ISI marked 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC conduit size of not less than 20 mm including conduit fittings and accessories concealed in wall / ceiling wiring on ceiling /wall terminated in flush metal box alongwith outer cover plate for mounting modular/piano switch, socket and electronic regulator along with provn of earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded FRLS ISI marked copper conductor of size 1.5 sqmm all as specified and directed by Engr-in-Charge. For One light point/fan point/bell Point controlled by one switch one way.

All as per item No 98 above but for one 3 pin 5 amps socket outlet on indipendent board with switchs.

All as per item No 98 above but for one 3 pin 5 amps socket outlet on the same board with switchs.

All as per item No 98 above but with 2.5 Sq mm cable for Independent one 3 pin 15 Amps socket outlet In and including S/C 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR cable for continuous earth wire.

M&L for point wiring for one light / one fan / one bell controled by one switch with 1.5 Sq mm PVC insulated copper conductor cable drawing in and including PVC Casing/capping or surface conduit with 1.5 Sq mm PVC insulated copper conductor cable for continuous earth wire connected to main earth dolly with 3mm thick plastic laminated sheet cover complete as specified and directed by Engineer in Charge.

All as per srl item 102 above but for one 5 pin 5 amps socket outlet on the independent board.

All as per item No 102 above but for one 3 pin 5 amps socket outlet on the same board with other switchs.

All as per item No102 above but with 2.5 Sqmm PVC insulated stranded copper conductor cable for one 3 pin 15 Amps socket outlet. In and including S/C 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR cable for continuous earth wire.

M&L for point wiring with 1.5sqmm PVC insulated unsheathed multi stranded copper conductor cable drawing in existing steel/PVC conduit with 1.5 Sq mm PVC insulated copper conductor cable for continuous earth wire connected to main earth dolly excluding 3mm sheet metal box and hylam sheet complete for light point/fan point/bell point controlled by one switch complete all as specified and directed by Engineer in Charge.

All as per srl item 106 above but for one 5 pin 5 amps socket outlet on the independent board.

All as per item No 106 above but for one 3 pin 5 amps socket outlet on the same board with other switchs.

All as per item No 106 above but with 2.5 Sq mm PVC insulated stranded copper conductor cable for one 3 pin 15 Amps socket outlet. In and including S/C 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR cable for continuous earth wire.

S&F in replacement switch piano, flush type single pole, one way, 6 Amps, 240 volts all as specified and directed by Eng-in-charge.

S&F in replacement Socket outlet 2 in 1, 5 pin,6 A, 240 volts all as specified and directed by Eng-in-charge.

S&F in replacement switch piano, flush type single pole, one way, 16 Amps, 240 volts all as specified and directed by Eng-in-charge.

S&F in replacement socket 16 Amps, 2 in 1, flush type all as specified and directed by Eng-in-charge.

Supply & fix in replacement bell push, flush type, 5 Amps, 240 volts all as specified and directed by Eng-in-charge. .

S&F in replacement Fan Regulator step type 120 watt, 240 volt complete.

S&F in replacement Modular Fan step regulator, 120W step type 120 watt, 240 volt complete.

S & F Modular switch 1 way 6A, 1 modules suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S & F Modular Socket, 6A - 2/3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S&F Modular switch 1 way 16A, 1 modules suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S & F Modular Socket, 16A 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply and fix Modular bell push 1 Module 5 Amps suitable for 240 volt Complete all as specified and directed by Engineer-in-Charge.

Supply and fix White cover plate with frame,2 module Complete all as specified and directed by Engineer-in-Charge.

Supply and fix White cover plate with frame,3 module Complete all as specified and directed by Engineer-in-Charge.

Supply and fix White cover plate with frame,4 module Complete all as specified and directed by Engineer-in-Charge.

Supply and fix White cover plate with frame,6 module Complete all as specified and directed by Engineer-in-Charge.

Supply and fix White cover plate with frame,8 module Complete all as specified and directed by Engineer-in-Charge.

S & F Modular metal flush box 3 module Complete all as specified and directed by Engineer-in-Charge.

S & F Modular metal flush box 4 module Complete all as specified and directed by Engineer-in-Charge.

S & F Modular metal flush box 6 module Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement ceiling roses, surface bakelite 65x50mm ,3 terminals 3 phase, PVC/Polycarbonate, isolated body all as specified and directed by Eng-in charge

Taking down the old white hylium sheet from the existing flash metal box and replacing new supper quality white hylium sheet of size 9" x 13" complete all as specified and as directed by Engineer-in-Charge.

All as per srl item 131above but of size 8" x 5" complete all as specified and as directed by Engineer-in-Charge.

All as per srl item 131 above but of size 7" x 5" complete all as specified and as directed by Engineer-in-Charge.

All as per srl item 131 above but of size 5" x 5" complete all as specified and as directed by Engineer-in-Charge.

Taking down rusted sunkan metal box and fixing new metal box of 3 mm thick of size 9''x13'' with finishig of disturbed surfaced as directed by Engineer in charge.

All as per srl item 135 above but of size 8''x5'' with finishing of disturbed surfaced as directed by Engineer in charge.

All as per srl item 135 above but size 7" x 5" with finishing of disturbed surfaced as directed by Engineer in charge.

All as per srl item 135 above but size 5" x 5" with finishing of disturbed surfaced as directed by Engineer in charge.

S&F in repair of sub main wiring with 2 single core 04 Sq mm PVC insulated unsheathed 1100 V grade copper conductor cable drawing in existing rigid non- metallic PVC/metallic conduit incl 4.0 Sq mm PVC insulated single core copper conductor cable for continuous earth wire. Note: 3 runs of 4 Sqmm wire will be measure one unit

S&F in repair of sub main wiring with 2 single core 06 Sq mm PVC insulated unsheathed 1100 V grade copper conductor cable drawing in existing rigid non metallic PVC conduit incl 6.0 Sq mm PVC insulated single core copper conductor cable for continuous earth wire. Note: 3 runs of 6 Sqmm wire will be measure one unit

S&F in repair of sub main wiring with 2 single core 04 Sq mm PVC insulated unsheathed 1100 V grade copper conductor cable drawing in and incl rigid non metallic PVC conduit 25 mm dia incl 04 Sq mm PVC insulated single core copper conductor cable for continuous earth wire. Note: 3 runs of 4 Sqmm wire and 1 run of PVC condiut will be measure one unit

S&F in repair of sub main wiring with 2 single core 06 Sq mm PVC insulated unsheathed 1100 V grade copper conductor cable drawing in and incl rigid non metallic PVC conduit 25 mm dia incl 6.0 Sq mm PVC insulated single core copper conductor cable for continuous earth wire.Note: 3 runs of 6 Sqmm wire and 1 run of PVC condiut will be measure one unit

S&F in repair of sub main wiring with 2 single core 10 Sq mm PVC insulated unsheathed 1100 V grade copper conductor cable drawing in existing rigid non metallic PVC conduit 32 mm dia incl 10 Sq mm PVC insulated single core copper conductor cable for continuous earth wire. Note: 3 runs of 10 Sqmm wire will be measure one unit

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete.

Supply and fixing decorative LED wall light for reduced glare designed for use with energy saving LED light bulbs with 100 lumen/watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to terminal block, and testing complete all as specified and directed by the Engineer-In- Charge.

Supply and fixing round/square shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up core flexible copper conductor cable of suitable size complete.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up driver with flexible copper conductor cases of suitable size complete.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.

S&F in replacement electronic driver suitable for 24 to 48 watt suitable for 30 to 60 w street lights/flood lights Complete all as specified and directed by Engineer-in-Charge. .

All as per item No 150 above but Suitable for 70 to 150 W complete all as directed by Engr-in-charge.

Supply and fix in replacement lamp holder PVC/Poly Carbonate type suitable for LED Bulb with ISI mark complete all as specified and as directed by Eng-in-charge.

Supply and fixing in repairs bell, AC, 230 volts, single pole

Supply and fixing in replacement load line vertical distribution board 'A' frame made out of CRCA sheet,double door, surface mounting TPN 4 way 415 volts 200 Amps rated bus bar and stove enamels dust and vermin proof suitable forTP/FP 'A' frame MCCB of 100 Amps =01 No MCCB for outgoing comlete all as specified and as directed by Engineer-in-Charge. Note :- MCB shall be measured and paid seperately.

Supply and fixing in replacement load line vertical distribution board 'A' frame made out of CRCA sheet,double door, surface mounting TPN 6 way 415 volts 200 Amps rated bus bar and stove enamels dust and vermin proof suitable forTP/FP 'A' frame MCCB of 100 Amps =01 No MCCB for outgoing comlete all as specified and as directed by Engineer-in-Charge. Note :- MCB shall be measured and paid seperately.

S & F in replacement of Timelite distribution boards 32A, 3 pole, 240V digital switch complete all as specified and as directed.

S&F in replacement of fan capacitor with copper wire plastic body 2.5 mfd.

S&F in replacement of fan capacitor with copper wire plastic body 3.15 mfd.

S&F in replacement of rubber seal for ceiling fan complete all as specified and directed by Engineer in Charge.

S&F in replacement of mild steel U clamps including 10 mm dia but, nuts, washers and split pin for ceiling fan complete all as specified and directed by Engineer in Charge.

S&F in replacement of mild steel fan hook made out of 12 mm dia mild steel round bar of suitable size as per existing hook as directed by Engineerin Charge.

S&F in replacement of upper louver conopy of ceiling fan of any sweep, make, modles & size as per existing complete as specified and directed by Engineer in Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Taking down carefully Exhaust fans after disconnecting all electrical connections of any size for minor repair/service/rewinding/greasing as directed by Engineer in Charge.

M & L for repair to exhaust fan/ of of any size ( 200 to 600 mm sweep) by replacing unserviceable ball bearing No 6201/6202/6203 including neccessary greasing complete all as specified and directed by Engineer-in-Charge.

Fixing only exhaust fan (M.D.supply) and connecting upincluding provision of cable from ceiling rose/connector to fan

S&F in replacement of exhaust fan heavy duty plastic body 200 mm sweep including necessary fixing arrangement for proper fixing in wall as per site requirement complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of exhaust fan heavy duty metal body type 225/230 mm sweep including necessary fixing arrangement for proper fixing in wall as per site requirement complete all as specified and as directed by Engineer-in-Charge.

All as per item No 168 above but size of exhaust fan 300 mm sweep complete all as directed by Engr-in-charge.

All as per item No 168 above but size of exhaust fan 450 mm sweep complete all as directed by Engr-in-charge.

S&F in replacement of wall mounting fan heavy duty 450 mm sweep including necessary fixing arrangement for proper fixing on wall as per site requirement complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of exhaust fan louvers fan suitable for 225/230/250 mm sweep including necessary fixing arrangement for proper fixing on wall as per site requirement complete all as specified and as directed by Engineer-in-Charge.

All as per item No 172 above but size of exhaust fan 300 mm sweep complete all as directed by Engr-in-charge.

Supply and fixing in replacement MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting SPN 8 way 230 volts double door. Note :- MCB shall be measured and paid seperately.

Supply and fixing in replacement MCBs 10 KA breaking capacity, single pole, 240 volts, 6 to 40 amps C Curve capacity.

Supply and fixing in replacement MCBs 10 KA breaking capacity, single pole, and neutral, 240 volts, 40 amps C Curve capacity.

S&F in replacement MCB TP 25 to 63 Amps 10 KA, 440 volt 50 Hz all as specified ans directed by engineer in- charge.

S&F in replacement MCCB FP 40 Amps 16 KA, 440/415 volt 50 Hz all as specified ans directed by engineer in- charge.

Supply and fixing in replacement MCCB four Pole 100 Amps, 415 volt thermal release bearing cap 16 KA suitable for the MCB DB above comlete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement MCCB four Pole 125 Amps, 415 volt thermal release bearing cap 16 KA suitable for the MCB DB above comlete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of MCCB 160 Amps FP 415 volts 3 phase 50 HZ with fixed/adjustable Thermal & adjustable Magnetic setting of rapturing capacity 35 KA.

S&F in replacement of MCCB 200 Amps FP 415 volts 3 phase 50 HZ with fixed/adjustable Thermal & adjustable Magnetic setting of rapturing capacity 35 KA.

S&F in replacement of MCCB 250 Amps FP 415 volts 3 phase 50 HZ with fixed/adjustable Thermal & adjustable Magnetic setting of rapturing capacity 35 KA.

S&F in replacement of MCCB 320 Amps FP 415 volts 3 phase 50 HZ with Fixed/adjustable Thermal & adjustable Magnetic setting of rapturing capacity 36 KA.

Excavation in trenches in hard and dense soil n exc 1.5 mtr wide and n.exc 1.5 mtr in depth for laying of pipe,foundation for poles, stay, laying cables etc and getting out complete all as directed by engineer-in-charge.

Returning filling in including spreading, leveling watering and well ramming in layers n. exc 25 cm in hard/dense soil complete all as directed by engineer-in-charge..

Removing excavated material n.exc 50 meters and depositing where directed at a level n.exc 1.5 meter above the starting point complete all as directed by engineer-in-charge.

M&L for Sand cushioning of cables provided with a layer of sand 8 cm deep before laying the cable and 15 cm depth after punning down and stretching the cable complete all as directed by engineer-in-charge.

Supply and laying well burnt sub class ‘B’ bricks old size as mechanical protection to under ground cables laying across the cable complete all as directed by engineer-in-charge.

laying of old bricks received during earth excavation after keeping safe as mechanical protection to under ground cables laying across the cable complete all as directed by engineer-in-charge.

M&L for precast cement concrete block masonry with solid blocks,exceeding 10 cm in width and setting in mortar type B1, 1:2:4 using 20 mm graded aggrigate complete all as specified and as directed.

Material and labour for cutting of road/ hard standing up to a size not exceeding 20cm width and not exceeding 60cm in depth for laying of cable protection pipe including making good the disturbed road/hard standing by providing PCC (1:2:4) type B1 and block top with black bituminous upto existing surface level complete all as specified and as directed by Engineer-in-charge.

Supply and laying GI pipe light grade galvanized with all fittings laid in trenches or fix on wall for cable protection of 80 mm bore complete all as directed by engineer-in-charge.Make-Jindal/Swastik/Tata

All as per srl item No 193 above but size 50 mm bore copmlete all as directed by engineer-in-charge.

Disconnecting,removing & taking out faulty U/G cable off sizes from trenches,wall and ducts complete all specified and as directed

Supply, Laying, Testing and connecting cable XLPE insulated armoured heavy duty electric cable with stranded aluminium conductor 1100 volts grade cross section area of 300 sqmm x 3.5 core copmlete all as directed by engineer-in-charge.

All as per srl item No 196 above but size 185 Sq mm x 3.5 core copmlete all as directed by engineer-in-charge.

All as per srl item No 196 above but size 70 Sq mm x 3.5 core copmlete all as directed by engineer-in-charge.

All as per srl item No 196 above but size 50 Sq mm x 3.5 core copmlete all as directed by engineer-in-charge.

All as per srl item No 196 above but size 35 Sq mm x 3.5 core copmlete all as directed by engineer-in-charge.

All as per srl item No 196 above but size 6 Sq mm x 4 core copmlete all as directed by engineer-in-charge.

All as per srl item No 196 above but size 10 Sq mm x 2 core copmlete all as directed by engineer-in-charge.

Supply and fixing in replacement of aluminium thimble stud type suitable for size of cable 240 to 400 sq mm all as specified and directed by engineer-in-charge.

Supply and fixing in replacement of aluminium thimble stud type suitable for size of cable 16 to 180 sq mm all as specified and directed by engineer-in-charge.

M & L in replacement FRP juction box including MCBs with front cover fixed with locking arrangement with suitable clamp/fixture on pole complete all as specified and directed by Engineer-in-Charge.

Material and labour for cleaning of Electric panel at rusted portion with sand paper and painting with synthetic enamel paint suaitable for metal complete all as specified and as directed by Engineer-in-Charge

Preparation of old painted surface of steel tubular swaged poles (9 to 11 meter long) and painting with one coat of aluminium paint including cleaning the acrylic cover and painting with black to 1.5 mtr height from top of PCC coping and marking pole numbers with one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement LED street light fitting 30/40 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

All as per srl item No 208 above but 60 watt

All as per srl item No 208 above but 80/90 watt

All as per srl item No 208 above but 120/150 watt

Supply and fixing LED flood light 50 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.

All as per srl item No 212 above but 150 watt

M&L for earthing complete with GI earth plate electrode 60cmx60cmx6.3mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with top edge of the plate not less than 1.5 meter below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of GI bolts, nuts, check nuts and washers earth pit surrounded by picked layer of coal dust and 15 mm thick mixture in equal ratio of magnesium sulphate & copper sulphate in all around bottom and top and watering pipe 20mm bore of GI medium grade with funnel all as shown in electrical plate NO 5 of SSR Part I (1991) and connecting to earthing test point, including CI cover, frame and PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in earthing pit with CI cover and framing including necessary earth work etc, complete all as specified Note :- PCC chamber shall be constructed at least one meter away from building shall be provided in slanting manner. Note :- PCC pit cover shall be precast of RCC 1:2:4 type B-I 80 mm thick reinforced with XPM weighting not less than 4 Kg (sqm in liew of CI)

All as per item no. 214 above, but using galvanised iron strip 25x4mm as earthhing lead

S&F in repairs 4mm dia GI wire

Material and labour in repairs galvanised iron strip 25 X 4 mm with saddles and fixing screws and connected as per site requirement comlete all as specified and as directed by Engineer-in-Charge.

S&F in replacement fixture arrangement for street light bracket i.e 1.5 mtr long made out of 40/50 mm dia medium grade GI pipe bend to shape at 120 degree & welded at required end including 02 Nos MS clamps of Flat iron 40x6mm complete all as directed by Engineer-in-Charge.

Hindustan Co.Co

Ashish Sehgal and Co.

shakti construction

Rishi Constructions

GIR RAJ BUILDERS

Laxmi traders