Repair/Renovation of Govt. Qtr no.52-C at Gandhi Nagar Jammu. CNO- 646 NP

Providing and fixing of Pre Fabricted Structure with following specifications. Providing and fixing of wall and roofs. The roofs shall be provided 30mm thick puff insulated panel make Sintex or 0.50mm thick precoated /precoloured sheets. The sheets are laid over a frame work of truss, purlins and rafters fixed using suitable fastners. (DETAILED EXPALANATION OF THIS ITEM EXPLAINED AT PAGE NO. 15 OF NIT) A 0.50mm precoated /precoloured steel sheets ridge cover of 0.40m from the eaves wall and 0.30m from the gable wall. the wall shall be made in sandwich panel system using 2nos of precoated /precoloured sheets of 0.50mm thick filled with 50mm thick puff with bulk density of 40kg/cum. the puff panels shall be make Sintex/Llyod/ Jindal continuous panel system. the panels shall be inserted one by one in to "U" shaped ground track of size 52.5 x 35 x 1.25mm thick made GI sheet/Sheet coil. The bottom track shall be fixed to the concrete platform level by suitable fastners screwed on to PVC expandable screw cap. Roof slope shall be 1:4 approx. as per seismic zone-iv. the walls height shall be 3Mtrs. At eaves and 3.36 mtrs at central gable, complete job in all respect incl below sub items. Demolishing brickwork manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead in cement mortar. Providing and laying in position reinforced cement concrete of specified grade excluding the cost of centering and shuttering.All work upto plinth level.1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) (Crushed). Centering and shuttering including Strutting propping etc and removal of form work for walls any thickness. Structural steel work riveted or bolted in built up section trusses; and frame work Including cutting hoisting fixing ln Position applying a priming coat of approved steel primer and two coats of enamel paint. Structural steel work riveted or bolted in built up section trusses; and frame work Including cutting hoisting fixing ln Position applying a priming coat of approved steel primer and two coats of enamel paint. Providing and fixing aluminium work for doors, Windows ventilators and partions with extruded built up standard tubular section/appropriate Z sections and other sections 3.25x1.5mm thick of approved make conforming to I5: 733 and 15: 1285, fixed with dash fastener of required dia and size including necessary filling up of gaps at junctions at top, bottom and sides with EPOM rubber/nerupren gasket fell etc aluminium sections shall be smooth rust free straight mitred jointed mechanically wherever required including snap beading glazing panelling C.P brass Stainless steel screws including door closers, stopper and all accessories required as per architectural drawing and direction of Engineer In Charge. Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm. (DETAILED EXPALANATION OF THIS ITEM EXPLAINED AT PAGE NO. 15 OF NIT) Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. Finishing walls with oil bound distemper in interior side and exterior weather shield paint in the outer side complete job two or more coats. Disposal of dismentled mulba etc by MT incl loading and unloading complete

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge

Providing & fixing 4mm thickness APP superthermoly stp sheet polyester based sheet black finishing( including 2 coats of silver colour paint) with hot torch treatment over RCC /cemented surface by following methods (i)applying with shalitex stp primer for bitumen membrane @0.40 liters/Sqm (ii) Mt. by the 4mm thickness APP superthermoly stp sheet polyester based sheet black finishing manufacturerer of density at@25*C ,0.87-0.89 kg/ liter over primer coated layer shall be laid using butane torch and sealing all the joints longitudinal as well as transverse prepare the surface complete. (iii) cut 1"deep grove above the roof surface on the parapet wall and seal edge of APP superthermoly stp polyester sheet into the groove with polymer modified mortar .(iv)Incase of low height parapets ,terminate APP superthermoly stp polyester sheet over the parapet. (v) For overlapping of joints, rub the polythylene side of membrane by wire brush,apply shali bond APP over the rubbed area ,allow it to the tacky and then fix the bituminous side of APP superthermoly stp sheet polyester with hot application (vi) For longitudinal and transverse joints overlap of 75mm and 100mm respectively is desired. The vital physical and chemical parameter of the membrane shall be as under:- Softening point of membrane not less than 150*C & cold flexibility shall be upto 0*C when tested in accordance with ASTM ,Joint strength in longitudinal amd transverse direction at 23*C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. in 4mm thick , the weight of Roll (40 kg for 1meter by 10 meter) complete job as per the direction of E.I.C

providing &fixing of ply 19mm thick ply including cutting wasteage fevicol carriage etc c LMR

providing &fixing of ply 6mm thick ply including cutting wasteage fevicol carriage etc complete item of superior make LMR

providing and fixing of 1mm thick sunmica including cutting ,wastage,fevicols nails etc.complete (LMR

providing and fixing of 0.85mm thick sunmica including cutting ,wastage,fevicols nails etc.complete (green,amulya,vigro) LMR

providing and fixing ACP sheet 4mm thick LMR

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Second class D- wood : 35mm thick

providing and fixing glazed shutter for doors,windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S pressed butt hinges finished of required size with necessary screws 30 mm second class deodar wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class deodar wood : 30mm thick

Extra for using stainless steel grade 304 wire gauge with wire of dia. 0.5 mm instead of Galvanized M.S. Wire gauge with wire of dia. 0.63 mm for doors, windows and clerestory windows with necessary screws: (shutter area to be measured)

Renewing glass panes, with wooden fillets wherever necessary 14.7.1Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm.

providing and fixing PVC pipe including / jointing with seal ring (Finolex / Supreme) of pressure @ 5.5 kg/Cm2 for100 mm dia. 4'' DIA PIPE

6'' DIA PIPE

providing and fixing of sliding channel 20cm

providing and fixing Auto hinges

providing and fixing steel pawa 4''

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

"Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Khajaria, Somany)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Providing and laying anti skid tile 300x300 of specified size having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge.

Providing and laying in position Cement Concrete of specified grade excluding the cost of centring and shuttering, all work ypto plinth level (1:3:6) 1 cement:3 coarse sand:6 graded stone aggreagate 20mm nominal size (crusher)

Providing / fixing polycorbonate sheet including wastage of 5mm thick (50 Micron) complete job

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

providing and fixing of PVC panelling on walls 8 to 10 mm thick inc, all fitting and fixtures complete

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

p/fixing of Water flush door 34mm with 1.0mm th. sunmica(GREEN,CENTURY,or Eq. make)on both sides incl. lipping, all accessories like hinges, tower bolts, lok harrisin, godrej) handle complete

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1MM THICK PUTTY

2MM THICK PUTTY

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

providing and fixing of wall bend mixer of jaquar, cera or essco

central hole basin mixer of jaquar, cera or essco

Sink Mixer of jaquar, cera or essco

Short nose bib cock of jaquar, cera or essco

Long nose bib cock of jaquar, cera or essco

Angle valve of jaquar, cera or essco

Towel Ring Square of jaquar, cera or essco

Shower with arm of jaquar, cera or essco

Hand shower of jaquar, cera or essco

Health Faucet of jaquar, cera or essco

Soap Dish holder of jaquar, cera or essco

Pillar cock of jaquar, cera or essco

Providing and fixing CP Brass Single lever telephonic wall mixer of Quality & make as approved by Engineer in charge.(a) 15 mm nominal dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete 32mm

Providing and fixing uplasticized PVC connection pipe with brass unions 30 cm length 15 mm nominal bore

Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length 15 mm nominal bore

Providing and fixing toilet paper holder C.P. brass

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc.complete

Providing and fixing floor mounted, white vitreous china single piece, water closet of approved brand/make, shape,size and pattern , including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. Flat back wash basin of size 630x450 mm.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

engage unkilled labour

carpenter skilled for carrying out repair

Engage welder for carrying out repair work at site including charges of welding set and helper

Engage mason

providing and fixing of wooden flooring of specified shade and brand as per direction of engineer in charge including base coat of foam complete job.

C.P gratings 4"

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Arer of slab over 0.5 sqm. Granite of any colour or shade (Area of slab over 0.5 sqm)

hardware items. SS Handels 12''

SS handels 8''

SS Handels 6"

Providing and fixing of modular kitchen accessorles of of approved specification incl carriage and fixing complete. SS Multi purpose basket 15''x20''x4''

SS Multi purpose basket 15''20''x6''

SS Multi purpose basket 15''x20''x8''

SS Multi purpose basket 15''x20''x12''

SS masnal pullout 15''x18''x18''

SS Cuttlery basket 15''x20''x4''

SS double sink 48"x18"x12"

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 150x10 mm

SS Hinges 3''

SS Hinges 4''

mortice latch and lock

Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete :

providing and fixing nickel plated m.s pipe curtain rods ,with nickel plated brackets including fittings 25mm dia

engage trolley for shifting of mulba froim site to outer area of municipality

Please Enable Macros to View BoQ information