Rerouting of sewage network connecting Workshop, change room, Canteen and PMR at MCHP area along with construction of public wash room near Fire Station inside Harbour area.

Earthwork excavation in all kind of soil from the existing ground level, levelling, ramming as per requirement etc. with all leads and lift, disposing the excavated material within initial lead at locations as directed, with supply of all labour, materials, T&P, hire & running charges of all machineries, all taxes etc. all complete excluding GST and as per direction of Engineer-in-charge.

Labour charges for Laying in trenches Centrifugally Cast (Spun), socket and spigot pipes Class K9, conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete. (Earthwork in trenches, pipes, specials and fittings to be measured and paid for separately) including cost of all labour, plumber, T&P etc. all complete excluding GST and as per direction of Engineer-in-Charge. 150mm dia CI Spigot socket pipe

Providing push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes using Rubber Gaskets Conforming to I.S 5382 of S.B.R quality including supply of rubber gasket and lubricants alongwith testing of joints as per specification etc. all complete excluding GST and as per direction of Engineer-in-Charge. 150mm Dia

Supplying, mixing, transporting, laying in proper level & grade Cement Concrete 1:4:8 (1 Cement : 4 Coarse Sand : 8 hard granite metal of 40mm & below size Crusher Broken) for Plain Cement Concrete (PCC) including form works made of ply/ steel shutters, hoisting, laying over compacted surface, compacting by any approved means, finished smooth to the exposed surface to proper level & gradient, barricading the work site, curing etc. with supply of all materials, labour, T&P, all taxes, royalties, hire & running charges of all machineries, transportation charges, Port entry fees, cost of water, testing charges of materials, excluding GST etc. all complete as per direction of Engineer-in-charge.

Cement concrete (1:1.5:3) using 12mm to 20mm size C.B.G. chips for all floors, foundation & plinth etc. of approved quality mixing, hoisting, laying, compacting, curing with cost and supply of all materials, labour, T&P, taxes, tollage, royalties, etc. all complete but excluding GST as directed by Engineer-in-charge.

Supplying, cutting, straightening, bending, binding, tying the grills hoisting and placing in position the reinforcement of Fe-500 steel confirming to I.S. specifications of any approved make with supply of binding wire 18 to 20 gauge as required for the work with supply of all labour, materials, T&P, all taxes, etc. excluding GST all complete including cost of reinforcement steel and as per direction of Engineer-in-charge NB: (i) No wastage shall be paid. (ii) Steel coefficient shall be considered as per IS 1786 for payment purpose with bar bending schedule.

Providing rigid, smooth, leak proof good quality centering & shuttering with formworks made out of new ply / Steel shutters, providing openings on walls as per requirement, maintaining proper alignment etc. in both horizontal and vertical plane, chipping & coaltaring after each use of shuttering materials, dismantling the same after stripping off period including supply of all materials, labour, T&P, tollage, all transportation charges, royalties, all taxes, excluding GST, etc all complete as directed by the Engineer in charge.

Foundation & Plinth

Roof Slab & chajja

Column

Lintel

Supplying of following Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes & fittings of good quality ….etc. with supply of all materials, labour, T&P, transportation charges, hire & running charges of all equipments, port entry fees, excluding GST, etc. all complete as per direction of Engineer-in-Charge.

Centrifugally Cast (spun) Iron S/S Pressure Pipes Class-LA, conforming to IA:1536-2001 150 mm dia.

150mm CI Spigot Tail Piece

150mm CI Socket Tail Piece

150mm 22⅟₂ CI Bend

150mm 11⅟₂ CI Bend

150mm 45 degree CI Bend

150mm 90 degree CI Bend

Brick work in Fly Ash Bricks of size 25cmx 12cm x 8cm and having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) including splay/cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour, T&P, taxes, royalties, transportation charges, curing, testing charges etc. all complete but excluding GST as per direction of Engineer-in-charge (for all floors).

Cement plaster with Cement Mortar of following proportion over brick work and concrete surface including chipping the concrete surface, watering the wall surface before plastering, with supply of all materials, labour, curing, taxes, tollage, royalties, T&P, scaffolding excluding GST etc. all complete as per direction of Engineer-in-charge. (For all floor).

16 mm thick cement plaster in CM (1:6) (inside)

12 mm thick cement plaster in CM (1:6) (outside)

12 mm thick cement plaster in CM (1:4) (ceiling plaster)

40 mm thick graded concrete with C.C(1:2:4) by using C.B.H.G chips of 6mm and down grade of approved quality adding 2% WPC of approved brand as suggested by department ,chipping the roof surface preparing the surface before concrete work, laying concrete to required slope & level, compacting etc. all complete with supply of all materials, labour T&P, taxes royalties, curing, , as per requirement excluding GST etc all complete as per direction of Engineer in-charge.

Supplying fitting fixing of Vitrified floor tiles ( premium Quality 600 x600 mm size)in floors, treads or steps and landing on 20 mm thick bed of cement mortar 1:4(1cement: 4 sand) jointed with white cement including rubbing and cleaning complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge.( New work).

Supplying fitting fixing of 6.5mm to 6.7mm thick ceramic wall tiles (premium Quality 200 x300 mm or 200 x200 mm size)as approved by EIC in floors, treads or steps and landing on 12mm thick bed of cement mortar 1:3(1cement: 3 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and cleaning complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge.

Exterior painting two coats to wall surface with acrylic based weather coat paint of approved quality & shade having resistance to Fungus, Fading, including scraping, cleaning, brushing, washing the old paint, as and when required, removing the flakes applying uniformly two coats including cost and supply of all materials, labour, T&P, taxes, transportation, staging, scaffolding, etc. complete but excluding GST as directed by the Engineer-in-charge.

Painting two coats of Plastic emulsion Paint over a coat of primer of any approved quality and shade including cleaning the wall surface and dadoes filling the holes, cuts and depressions with plaster of Paris, sand papering to give an even surface up to the satisfaction of Engineer-in-charge with supply of all materials, labour, T&P, taxes, scaffolding charges excluding GST etc. all complete as per direction of Engineer-in-charge.

Supplying, fitting & fixing of WPC door and window frames of required size as per requirement. The Door Frame should high screw holding capacity & fixing the metallic hold fast & shall be consolidated by filling of Plaster of Paris with supply of all labour, material, T& P , all Taxes, transportation, Port Entry fees, Staging etc. all complete but excluding cost of GST as directed by Engineer In-Charge.

32mm thick flush door shutter made out of 32mm B.W.R. block board and with 1mm thick sunmica to both side pasted with adhesive including fixing fixtures like Godrej make Mortice Lock , Godrej make Door closure having 100mm Aluminium heavy hinges with cutting grooves in chaukaths mending good the damages etc. all complete including cost of all materials, labour, T&P, taxes, all transportation, staging, scaffolding, etc. complete by excluding GST & as per direction of the Engineer-in-charge.

Supplying, fitting & fixing of factory made uPVC glazed/sliding glazed window, Door or ventilator with single/ double glass panes for windows & ventilators and Doors with the following specification. Frame : Made from the Extruded Lead Free (RoHS Compliance) uPVC Window Profile Section of size 60 x60mm (+/-2 mm) having outer wall thickness of 2.5mm (+/-0.2 mm) and multi-chambered, White in finish, duly reinforced with 1.2mm (+/-0.1 mm) thick galvanized U or Box type GI section. All the four corners shall be metered cut & thermal welded so as to form window or Door frame. Frame shall be milled with drain and air equalizer hole in order to be water tightness and for drainage of accumulated water ,if any ,to outer side. Specified hinges fix to the frame complete as per manufactures specification and direction of Engineer in charge. Shutter : The shutter of window or Door shall be made of 78 x 60 mm (+/-2mm)Extruded Lead Free (RoHS Compliance) uPVC Window Profile Section of white colour having outer wall thickness of 2.5mm (+/-0.2 mm) provided with reinforcement of 1.2mm(+/-0.1mm) thick welded at all corners and fitted with uPVC glazing bead suitable according to the glass with K & O type inner and outer EPDM weather seal gaskets along with glass. The rate should include cost of all materials,labour,fittings & fixtures, T&P,all taxes,electricity expenses if any,all transportation,all leads & lifts,safety arrangements,Port Entry Fees etc all complete as directed by E-I-C but excluding GST.

Providing 2000ltr capacity PVC syntax tank pure white colour -3 core water tank, Supplying & laying of glazed stone ware pipe of approved make and alignment to requisite gradient including jointing with tared gasket & cement mortar (1:1) encasing the pipe with C.C (1:3:6), curing the concrete work etc. all complete with supply of all materials, labour, T&P, taxes etc. excluding GST all complete as per direction of Engineer-in-charge. (including installation charges)

Supplying, fitting and fixing the following sanitary, CP and porcelain fittings of approved make & quality with all accessories & fittings etc. with supply of all labour materials, T&P, transportation, taxes, staging, scaffolding, etc.excluding cost of GST all complete as per direction of Engineer-in-charge

Commode With Cover Vitrious china Colour -White

Low level Cistern 10 ltr Capacity

CP health faucet with 1.00 m long flexible tube with PRV

CP 15 cm Pillar cock

CP angular stop cock 15 mm

CP waste coupling 32mm size

CP towel rail 600mm long

CP glass shelf 600mm long

600mmx450mm fancy glass mirror

CP bibcock

CP floor grating of size 125mm

Wash hand basin of size 530mmx425mm (white) vitrious china with half pedestal

Standing Urinal Vitrious China with Half Padestal

CP toilet paper holder with flap (Cover) 300 mm

32mm PVC waste pipe 600 mm length

25 to 40mm CP extension nipple

12 to 25mm CP extension nipple

Supplying, fitting and fixing & laying of following PVC grey pipes of type-B schedule-40 conforming to IS-13592 with all accessories & fittings conforming to IS-14735 & all related accessories fittings for laying of Pipe line for water supply & sanitary works with supply all accessories fittings, labour, material, T&P, transportation, taxes, staging, scaffolding, but excluding GST etc all complete as per direction of Engineer-in-charge. * 150mm PVC Pipe of Type-B class for Sewarage line.

Supplying, fitting and fixing & laying of following Un plasticized C -PVC pipes & fittings including all cpvc plain & brass threaded fittings & all related accessories fittings for laying of Pipe line including fixing the pipe with clamps including jointing of pipe and fittings with one step cpvc solvent cement of approved make conforming to schedule-40 standard of ASTMD-1785 and fittings of ASTMD-2467 for water supply & sanitary works with PTMT Nuts collar & bush of approved quality and colour with supply all accessories fittings ,labour, material, T&P, transportation, taxes, staging, scaffolding etc. excluding cost of GST all complete as per direction of Engineer-in-charge. * 32mm dia pipe of min. wall thickness 4.85mm

Back filling in foundation trenches by using the excavated material through the water pipe foundation as per requirement within initial lead and lift, leveling, dressing with cost of all labour, T&P, transportation, hire and running charges of all equipments/ machineries, POL, all taxes etc all complete excluding GST as per direction of Engineer-in-Charge.

Dismantling Old Brick Work/ RCC Structure in F & P and super structure at any height, any floor including stacking the useful materials for reuse and removing the debris & disposing the same at specified place as directed with supply of all labour, T&P, staging, scaffolding, etc. complete with all taxes, including leads & lifts, transportation but excluding GST etc. all complete as per direction of Engineer-in-charge.