Repair and Restoration of Putasingi to Nuagada 10.000 to 20.000 Km Road in the district of Rayagada for the year 2025 26

Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area, with all labour, T&P, taxes & cess etc complete as per direction of Engineer-in-charge.

Construction of enbankment with approved material obtained from borrow pit with lead and lift transporting to site by mechanical means within lead of 5kms, spreading grading to required slope and compacting to meet requirement of table 300-2 and clause 305 of MoSRT&H specification for road and bridge works etc complete as per direction of EIC.

Providing and laying including scraping, cleaning the road surface, applying tack coat using 3.0kg of bitumen for 10sqm and laying 37.5mm thick built up spray grouting in one layer, using 0.45cum of 25mm to 40mm size hard granite metal and 12.00kg penitration grade of bitumen for 10sqm in each layer with 0.12cum of 12mm size hard granite chips as key stone for 10sqm spreading over and laying including heating pouring and spreading over and spreading bitumen, metal and chips and rolling with P.R.R including hire and running charges of P.R.R and all other machineries with cost, conveyance, royalty, taxes, labour, T&P and cess etc complete as directed by the Engineer-in-charge.

Providing, laying, spreding and compacting stone aggregates of specific sizes to water bound macadam specification including spresding in uniform thickness, hand packing,rolling with three wheeled steel roller 8-10 tonnes in stage to proper grade and camber, applying and brooming requisite type of screenig/binding materials to fill up the interstices of coarse aggregates, watering and compacting to the required density as per clause 404 of MoSRT&H specifications for Road & Bridge works(4th Revision) with all labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge (measurement will not taken for quantity of filler material, compacted thickness to be measure as 75mm. thick) (WBM Grade-III)

Providing & applying primer coat with Bitumen emulsion on prepaired sueface of granular base including cleaning the road surface and spraying primer @ 0.60kg / sqm using mechanical means as per clause 502 of MoSRT & H specification for road & bridge works etc complete as per direction of EIC.

Providing and applying Tack coat with bitumen emulsion on prepared surface including clearing of road surfaces and spraying primer @ 0.20kg/ sqm using Mechanical means as per clause 502 of MoSRT&H Specifications of Road & Bridge work (04th Revision).

Providing , laying semi dence bituminious concrete with batch type hot mix plant using crushed aggregates of specified grading, primixed with bituminous binder of 60/70 penitration grade of bitumen, transporting the hot mix to work site, laying with hydrostaic paver finisher with sensor control to the required grade, level on the alignment, rolling with smooth wheeled, vibratory and tandem roller to the desired compaction as per clause 508 of MoSRT&H specification for road and bridge works etc.complete as per direction of EIC.

Finishing walls with water proofing cement paint (Weather coat) of approved shade two coats, to give an even shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Maintenace of road signs by way of cleaning and repainting of mandatory / requlatory / cutionary / informatory and place identifications sign board as perdrawings and technical specification Clause 1910.

Maintenance of 200 mtr, km stone & 5 th km stones by way of refiting of tited stones repairing with cement mortar, claning repairing and lettering on 200 mtrs km stone and 5 th km stone as per drawing and techincal specification Clause 1912.