REPAIRS/ CLEANING SEWAGE LINE, PATH, HARDSTANDING, CULVERT DRAIN, FENCING , BOUNDRY WALL AND MISC WORK AT MH AREA UNDER AGE (B/R) AT GE(U) E/M MEERUT CANTT.

Amount

Dewatering of soakage well or septic tanks/ manholes and sewage line by arranging mechanical sewage machine (sucking machine capacity 8000 ltr in each trip) of any size & capacity including removing the blockage of sewage line through mechanical/hydraulic pressure and removing waste material, sludge etc from out side the MOD land and dispose off at appropriate place all as directed.

Cleaning the blockage of P trap/S Trap of WC , gully trap, floor traps, Nahani trap completely enable the sewage to flow freely to 1st manholes, by taking off the grating for removal of sludge and burrying in the ground etc. and resetting the grating after cleaning and removing the sludge and other materials from the manholes/FT/NT and GT by suitable means and removing all the materials obtained from the manholes outside MD land and clearing the complete area including making good any damages to the line or manhols complete all as specified and directed.

Cleaning of septic tank of any size & capacity including inlet and outlet chamber, removing the waste material, sludge etc to out side the MOD land and burying in pits complete all as specified and directed. Note : i) Unit rate quoted shall include the cost of digging out pits, burying the waste material, sludge etc in pit and covering the same with earth. ii) Qty of sludge only shall be measured and paid for after , dewatering of septic tank.

Cleaning of horizontal sewage line of any dia upto 150mm bore dia drain pipes by roding from manhole to manhole and well flushing with water after cleaning including cleaning of manholes by taking off manhole cover and placing in position the same after cleaning and removing the waste material . sludge etc from manholes, burying in pits out side the MOD land complete all as specified and as directed. NOTES:- i) Unit rate quoted shall include the cost of digging out pits burying the waste material, sludge etc in pit, and covering the same with earth. ii) For the purpose of making payments length of drain pipe from manhole to manhole shall be measured .

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs deep and getting out in any type of soil for foundation of manholes etc complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers soil not exceeding 25 cm thick complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point, spreading and leveling complete all as specified and directed.

M&L PCC 1:4:8,Type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engineer -in-Charge.

Demolition and breaking up drain pipes (salt glazed stone ware) set in cement mortar in 150 mm dia including concrete bed & haunching where required and removing away as directed and specified.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in bed of drain pipes 150mm bore, laid to falls including packing under and haunching against the sides of pipes after they are laid and tested as specified and shown on drgs.

M&L 150mm bore salt glazed stone ware grade ‘A’ drain pipes, jointed on concrete bed complete including testing all as specified and directed by Engineer-in-Charge.

Cutting into existing manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round to ¾ sections) in cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) smooth finished and reforming benching as required internal dia of pipe 150mm complete all as specified and directed.

Demolition of reinforcement cement concrete in ground floor and paving n, exc 15 cm thick ( below or above ground level)

S&F factory made Pre cast reinforced cement concrete manhole cover ( medium duty) at size 1000mmX500mm X70mm thick confirming to IS 12592 with MS flat of 2 mm thick on permeter of manhole cover complete inclu demolirion of old RCC cover work complete all as specified and directed

S&F Pre cast reinforced cement concrete 1:2:4 , type B-1 (using 20mm graded crushed stone aggregate) factory made as in manhole cover slabs including necessary form work complete all as directed by Engineer-in-Charge (Reanforment shall be measured and paid sperately)

M&L for TMT round bars 10mm dia and over cut to length bent to shape required cranking bending hooking and as required for link in chain link fencing

Dismantling of 100/110mm dia of pipes PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed by Engr-in-charge following bore of pipe

Dismantling of 75mm dia of pipes PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed by Engr-in-charge following bore of pipe

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring jointed fixed to walls including all fitting and fixter complete all as specified and directed.

S&F PVC (SWR) pipes complete all as specified and directed.) pipes 75mm bore single socketed in any length with rubber ring jointed fixed to walls including all fitting and fixter

S&F PVC (SWR) 110 mm bends any radius complete all as specified and directed.

S&F PVC (SWR) 75 mm bends any radius complete all as specified and directed.

S&F ,Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays , including bolts and nuts and securing ends of stays to wall in 75mm

Taking down existing unserviceable water closet and S&F Vitreous china, white, Squatting pan ,'Orrisa' pattern size 580x440mm with integral footrests water closet) , front or back inlet complete , connection to drain pipe and to flushing pipe , antisyphonage pipe etc complete including making good to floor to match with the exisitng all as specified and directed by Engr-In-Charge

Taking down of existing unserviceable wash down water closet with seat cover and S&F Vitreous China white wash down water closet ( padestal pattern) , including fixing bolts, plastic closet seat, black, closed pattern with recessed bottom and cover and mild steel CP hinging device, including connection to drain pipe, and to flushing pipe and anti syphonic pipe and EWC seat cover flat bac including hinges device etc. complete all as specified and directed by Engr-In-Charge

Dismantling post or struts ( wood steel, RCC ) any section including taking out embeded portion in concrete etc and making good disturbed ground.

Excavation in any type of soil as in post holes ( or similar holes) getting out and removing surplus soil to a distance n.exc 1.50 m making good disturbed portion of the surfaces complete all as specified and directed.

M&L PCC 1:3:6 type C-2 ( using 40mm graded crushed stone aggregate) as in foundation filling sub base and mass concrete all as specified.

Supply only Chain link MS galvanisd fencing of dia2.5 mm and any mesh size made into mattresses laped wired laid in position all as specified and as directed by Engr in Charge.(Note :-Weight decided by BOO)

Fixing only chain link fencing including line wires, any mesh size and any type of standards rails straining bolts etc including provision of binding wireany size or type (weight n exc 4 Kg per Sqm metre) as approved by Engineer- in-Charge including taking out old chain link fencing

M&L Steel screw bolt (machine made) with hexagonal or square head at one end and screwed other end to be fitted with with washeres and one hexagonal head nut 5 to 10mm dia and n,exc 10cm long.

M&L MS round bars 10mm dia and over cut to length bent to shape required cranking bending hooking and as required for link in chain link fencing

S&F Hand rail, half round or other section or core for wooden hand rail straight portion drilled and countershunk for baluster,nosing to steps including embeding in concrete and screwing etc,wind ties for roof including screwing bolts,post and struts running bars for doors, post and strut in fencing including cutting top to shape as directed, drilling hole for wire etc, Flat iron fillet for wire mess and similar work, confirming to Fe-290 Grade E -165

S&F in repair galvanized two strand steel barded wire 2.24 mm dia barbed with 2mm dia barbs of 75mm specing and straining and fixing to any type of standard rails standing bolt including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc complete all as specified and directed ( Each line measured separately)

Materials & Labour for preparation of new steel surface of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamels paints over a coat of red oxide primer all as specified.

Demolition of brick work or stone/boulder masonry laid in cement mortar in any description as directed.

M&L for brick work with burnt bricks straight or curved on plan to any radius built in CM 1:6 all as specified and directed by Engr -in-Charge

Ditto as per srl item 37 but except brick.

Taking down cement plaster on brick or concrete or stone walls surface including racking out joints, hacking for keys, scrubbing down with water etc complete all as spd and directed.

Materials & labour for applying 15mm thick in cm 1:4 on brick walls or concrete surface of finished even and fair all as specified and directed.

M&L for preparing new plastered surface of wall and applying two coat of cement base paint over a coat of primer etc all as specified and directed by Engr -in-Charge

M&L for preparing new plastered surface of wall and applying one coat of primer and two coat of weather proof exterior grade emulsion complete all as specified and directed

Material and labour for greasing the steel rolliing shutter including opening top cover,removing spring etc and supply and fixing new spring, greasing the anchoring rod, refixing the top cover etc complete making the rolling shutter duly functional complete all as directed by Engr in charge(Area exceeding 4 Sqm and not exceeding 7.5 Sqm of each shutter)

Material and labour for greasing the steel rolliing shutter including opening top cover,removing spring etc and supply and fixing new spring, greasing the anchoring rod, refixing the top cover etc complete making the rolling shutter duly functional complete all as directed by Engr in harge(Area exceeding 8 Sqm and not exceeding 15 Sqm of each shutter)

Demolition of cement concrete of any description in ground floors and paving n exc exc 15 cm thickness,complete all as specified.

M & L for 75 mm thick PCC type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete.

M&L for coloured Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 grade over and inclding 30 mm thick sand coushing compacted thickness concrete all as specified and directed

M&L coloured chequered cement concrete tiles 30X30X25 mmm thick jointed and pointed in neat cement slurry in with grey pigmenet and pigment over and including screed bed in cm 1:6 complete all as specified and directed

M&L cement concrete in roof kerbs or muds stops rounded or chamfered typeB1 1:2:4 ( 20 mm graded aggregate )

Dismantling of stone slabs and tiles of any description or thickness in floors,aprons etc laid bedded and pointed in any mortor,complete all as specified and directed.

M&L for Granite (of any type) 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and including 10mm thick backing coat in CM (1:4).complete all as specified and directed as approved shape

Dismantling of structural steel work including doors,gates but excluding framed truss etc, complete all as specified.

S&F framed work of rolled mild steel conforming to Gde Fe 410-0 or Fe 310-0 as in gates of angle or other section with gusset plates, rails, braces, etc, to be prepared for hanging with and including either hooks & hinges or steel hanging door fittings and hanging, fastening & fixing including drilling & welding complete.

Dismantling plain or corrugated asbestos cement ( corrugated semi-corrugated etc) sheets in roof covering complete.

Dismantling wall and ceiling boards ( fibre pulp insullation Etc) or insullation boards/ slabs blankets any thickness including cover fillets

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick ( AZ 150) of an colour having tensile strength of 550 Mpa as in roof covering / clading to wall fixed self tapping screwe/ J or L type cranked hook bolts complete all as specified and directed

Ditto as per above item but plain sheet as in ridge all as specified and directed

S&F MS wind tie for roof including securing bolt etc omplete

S&F powder coated aluminium snap grid size 605X605 mm frame work for false ceiling including 4 mm dia GI hanger up to 2.0 m hight all as specified

M&L perforated particle board/ tiles for E board false ceiling 60X60 cm in size fixed with on frame work or with staple on snap grid as in ceiling flat or sloping all as specified and directed.

S&F In repair punched tape concertina coil 1A specification in 500 mm dia entaglments and 150 mm pitch ( Weight not less than 2 kg per rm ) all as specified and directed

AEGIS INTERNATIONAL (BID ID -3378935)