SPL REPAIR TO BLDG NO T-101, T-102, T-71 , T-174(B) AT GRTE AND PROVN OF APPROACH ROADS FROM LEFT CORNER OF GOLF COURSE AT BENGDUBI MIL STN UNDER GE BENGDUBI.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including disposing off the retrieved debris outside the premises, complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust etc and brushing neat cement slury with 3kg/sqm, complete all as specified and as directed..

MM & L for Vitrified Ceramic Tiles (Light Shade) 8 to10 mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed dbe in CM (1:6) etc complete all as specified and as directed .

M & L for Vitrified Ceramic Tiles (Light Shade) 8 to10 mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in vertical surfaces, dado, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick back coat in CM (1:4) complete all as specified and as directed

M & L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tiles, over and including 15mm thick screed bed in CM (1:6), complete all as specified and as directed.

M&L for coloured Glazed ceramic tiles of size 300mmx 450mm , 6 to 7 mm thick on the vertical surfaces such as in skirting / dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the shade of the tiles, over and including 10mm thick cement mortal backing coat in CM (1:4), complete all as specified and and as directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for granite (of any type) 18-20mm thick (Table rubbled and mirror polished ) in steps, jambs, pillars, window-cills, cooking platform etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 20mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L for P.C.C (1:2:4) type B-1, (using 20mm graded aggregate)25 mm thick in flooring finishing cement concrete surface even and fair to receive tiles etc complete all as specified and as directed.

Taking down chowkats or frames with Wooden/PVC/Flush shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc, disposing off the retrieved debris outsite the premises, complete all as specified and as directed.

Taking down chowkats or frames with Wooden/PVC/Flush shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc, disposing off the debris outsite the premises, complete all as specified and as directed.

S&F factory made 1.25 mm thick pressed steel frame of size 165 X 60 mm for doors with one or more rebates including necessary provision of lugs, locks strike plate, hinges etc, applying one shop coat of Zinc Chromate primer after preparation of the surfaces, complete all as specified and as directed.

S&F factory made 1.25 mm thick pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary provision of lugs, locks strike plate, hinges etc, applying one shop coat of Zinc Chromate primer after preparation of the surfaces, complete all as specified and as directed.

M&L for cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in coping, bed block for filling hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones bed plates,water troughs and the like including weathering, slightly rounded or chamfered angles & throating as including form work as required complete all as specified and as directed.

S&F Solid PVC frame (Single Rebated) of size 50mm x 47mm made out of 5mm plain colour PVC sheet, re-inforced with mild steel square tube screws complete all as specified and as shown on drawing and as directed. Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & show on drawing for SI NO 8101 on Sr. Page No181 of SSR Part -II and as directed.

S&F Factory made 35mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.

S&F 35 mm thick factory made Prelam wire mesh multipanel solid PVC Door Shutter consisting of framemade out of M.S. Tubes of 19 guage thickness and size of 25 mm x 25mm for stiles as well as for top and bottom rails M.S. frame shall have a coat of metal primer of approved make and manufacturer. 25 mmx 25 mm M.S. square tubes shall be lipped with plain PVC sheet made from 5 mm (0.25) thick PVC Sheet with 15mm (5nmm x 3 nos) thickness and 25mm width, of Density 600 Kg/Cbm Manufactured by an ISO-9001-2015 certified company 5mm thick single sideprelam with 2,4,6 or 8 panel to be pasted on both sides of M.S. welded frame. Inside hollow area of MS Frame to be filled with suitable thickness solid PVC Sheet, multipanel of Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. Door to be fixed to frame with 3 Nos. M.S. power coated butt hinges size 100mm x 25mmx 2mm and 32 mm long steel screws drilled suitable to pass through both the walls of the M.S. tube. Other hardwares should be fixed with 19x6mm size steel screws etc. complete all as specified and directed.

M&L for the Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165, complete all as specified and as directed.

S&F 4mm thick plain sheet glass of ordinary quality and glazing for Aluminium Joinery, in squares n.exc 0.50 sqm in each pane, complete all as specified and as directed.

S&F 4mm thick one side frosted glass of ordinary quality and glazing for Aluminium Joinery, in squares n.exc 0.50 sqm in each pane, complete all as specified and as directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolt, 200 mm long of extruded section, complete all as specified and as directed.

S&F Toughned glass 10mm thickness as in hinged door,partition glass and similar work incl cutting to shape drilling holes incl all necessary fittings item complete all as specified and as directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and as directed.

S&F 75mm size stainless steel butt hinges, medium weight, cold rolled, mild steel, complete all as specified and as directed.

S&F 150 mm size aluminium handle, cast type, anodised, complete all as specified and as directed

Dismantling of Plain sheet (corrugated , semi corrugated, etc.) steel sheets in roof coverings including ridges etc complete all as specified and as directed .

S&F pre-painted colored trapezoidal profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating, 550 MPA yield stress as per AS-1397), colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, as in roof covering/ cladding to wall, fixed with and including Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals), complete all as specified and directed.

S&F of GI frame work (with size of grid 605mmx605mm) for seamless ceiling comprising GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including provision of hangers (length of hangers as required at site) made of 4mm dia GI wire and other accessories and including 10 mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet, complete all as specified and as directed.

S&F anodised aluminium snap grid of size 605x605mm frame work for false ceiling hangers 4mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out GI flat iron 40x3mm size 60mm long and fixed expansion hold fasteners 12.5mm dia and 40mm long,complete all as specified and as directed.

S & F 4mm thick Non-asbestos fibre cement decorative/designer building boards to steel frame work with screws in ceiling (flat and/or slopping) and including jointless finish with & also including joining compound and tape as per manufacturer instructions, including dismantling of wall and ceiling boards complete all as specified and as directed. Notes :- (i) The board shall be confirming to IS-14862 and shall be manufactured from the homogeneious mixture of cement, quartz and cellulose and shall be curred with high pressure steam using auto claving process.(ii) Aluminium frame work shall be measured and paid for separately.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed .

S&F mild steel rolled sections [Fe 410-W (Gde E-250) quality - B] as in roof trusses (framed), trussed, main and cross beams, hip and jack rafters, purlins, Gusset plate and base plates, where connected to common rafters and running rails, distance pieces, cleats, guides for sliding doors; fixed with angle cleats or other connecting plates, framing for cladding, staging for water tanks, nuts, bolts, washers etc,includng welding or riveting etc, complete all as specified and as directed.

Taking down cement plaster on brick or concrete surfaces etc, including raking out joints, hacking for key, scrubbing down with water etc, and also including removal of rubbish off the premises, complete all as specified and directed..

M&L for rendering 15 mm thick in cement mortar (1:6), on other than fair faces of brick work or concrete surfaces, finished even and fair without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair face of brick work or concrete surfaces finished even and fair (without using extra cement) mixed with water proofing compound as per manufacturer instructions, complete all as specified and as directed. Note:- WPC shall be measured and paaid seperately.

Supply only integral water proofing compound, complete all as specified and as directed.

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm dia bore complete all as specified and as directed

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 20 mm dia bore complete all as specified and as directed

S&F laying of CPVC pipes SDR 11& plain CPVC SDR 11 20mm outer dia laid in trenches/wall complete all as specifed

S&F 20mm bore medium grade, galvanized steel tubing (including in short lengths) with and including all fittings, complete all as specified and as directed.

S&F in repair Vitreous china wash down water closet pan (Padestal Pattern), including connection to flush pipe, 'P' or 'S' trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device (excluding flushing cistern and flush pipe), and making good to dismantled/damaged tiling floor complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank 1000ltrs capacity, ISI marked, (cylindrical vertical type double-layered) with closed top including inlet,outlet and wash out holes, provision of G.I Fittings for fixing of the inlet, outlet and washout pipes, hoisted in position, including dismantling of existing water tank complete all as specified and as directed.

S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe of 20mm bore (Minimum weight 210 grms), complete all as specified and as directed.

S&F in repair Vitreous china squatting pan 'Orrisa' patterns of size 580mm x 440mm white, (excluding flushing cisterns and flush pipe), including brass chromium plated trap 'P' or 'S' pattern with inlet and outlet integral foot rests, complete all as specified

S&F in repair of Vitreous china WHB 550x400mm size white flat back with brackets incl cutting or pinning ends of brackets (including waste pipe) incl Waste coupling of PTMT (32 mm dia) (half or full threaded) (Minimum weight 32mm 45gms/40mm-60 gm complete all as specified and directed.

S & Fin repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe etc complete all as specified and as directed

S&F in repairs of 600 x 450 mm bevelled edge mirror of seleceted quality glass mounted on 6mm thick AC building board or ply board and fixed to wooden plug with CP brass screw and cup washer.

Demolition of brick work or rubbled stone masonry including all quoins, arches , pillars etc built in cement mortar including disposing off the retrieved debris outside the premises, complete all as specified and as directed.

M&L for Brickwork with fly ash Bricks(old size), straight or curved on plan to any radius in half brick walls built in Cement mortar (1:4), complete all as specified and directed

M&L for Brickwork with fly ash Bricks(old size), straight or curved on plan exc 6m mean radius built in Cement morter (1:6), complete all as specified and directed

S&F Basin Mixer chromium plated without popup waste with 450mm long braided houses screwed down for iron pipe, 15 mm, and fixed incl taking down complete all as specified and as directed

S&F of 15 mm bore single lever walll mixer 3-in-1 system chromium plated with provision for both hand shower & overhead shower complete with 115mm long bend pipe, connection gegs & wall flange (without hand & overhead shower) screwed one ends for iron pipes (concealed type) incl taking down complete all as specified

S&F Vitreous china wash down water closet pan (Padestal Pattern), 'P' trap, with fixing bolts UF soft close slim seat cover, hinges, dual flush cistern fiting and fixing acesssories incl taking down complete all as specified and directed

S&F Over head shower 150x150mm square shape single flow (ABS body chrome plated) with grey face plate)with rubit cleaning system etc all necessery fittings incl taking down complete all as specified

S&F counter top wash hand basin white flat of size 560X430X195mm excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed

S&F as in repair 15mm bore Pillar taps fancy type, with long swan neck , chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed

S&F for angular stop cock 15 mm bore chromioum plated with wall flange incl taking down complete all as specified

S&F Looking mirror swivel mirror 630x445mm rectangular shape incl taking down complete all as specified

S&F in repair tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed

S&F hand shower (Health Faucet) ABS Body with 8 mm dia, 1.25 mtr long flexible tube & wall hook etc complete all as specified and as specifed and as directed.

S&F in repair bib tap (Long body) fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed.

S&F in repair 15 mm Stop valves/ angle valve fancy (concealed), type cast copper alloy with chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed.complete all as specified and as directed.

S&F in repair 15 mm dia 450 mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washercomplete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors all or fixed to wall vertical complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints laid in trenches or in floorscomplete all as specified and as directed.

S&F PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified and as directed.

S&F PVC (SWR) junction single, Single T equal or unequal for 110 mm bore of pipe as specified.

S&F PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 110mm, complete all as spcified

S & F 110 mm dia PVC (SWR`) pipes single socketed in any length with rubber rings joints fixed to walls with suitable clamps complete all as specified

S&F PVC (SWR) vent Cowl for 110 mm bore pipe as specified.

S&F PVC (SWR) floor trap, plain with grating 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) ,in repairs and including waterleak proof treatment complete all as spcified.

Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically provided for complete etc all as specified and as directed.

M&L for providing 75mm thick PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate), as in plinth protection, surface finished even & smooth without using extra cement including provision of 10 mm joints (at an interval of 3 metre and turnings) duly filled with fine sand and bitumen in the ratio of (3.1) complete all as specified

M&L for 75mm thick pcc (1:3:6) type C-2, (using40 mm graded aggregrate) as in sub base of flooring . Complete all as specified and directed

Providing and laying 60 mm thick factorymade chamfered edge cement concrete paverblock of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method usingPU mould, laid in required colour & patternover and including 50mm thick compactedbed of fine sand, compacting and properembedding/ laying of inter locking paverblocks into the sand bedding layerthroughvibratory compaction by using platevibrator, fillingthe joints with sand andcutting of paver blocks as per required sizeand pattern, finishing and sweeping extra Complete all as specified and directed

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends and edges of landing ,steps,cills,sunshade,shelves,lintel,etc and cutting chases for concealed water tubing or concealed conduit wiring etc, making good, cutting not exc 10cm girth.

S&F decorative stainless steel curtain rod of wooden finish 20mm dia thickness not less than 0.75mm fixed with curtain rod holder fixed in walls wih screws and finials caps with 06 Nos of curtain ring per Rm complete all as specified and directed.

M&L for preparing new plastered surface of walls with applying one coat of primer and applying two coat of oil bond distemper white or any tint etc over 1mm thick wall care putty complete as specified and directed

M&L for complete removal of existing treatement of internal wall and appying two coat of oil bound distemper over 1 mm thick wall care putty including a coat of alkali resistant priming paint etc complete all as specified and as directed.

M&L for preparing newly plastered surface of wall applying wall care putty 1mm thick and applying two coats of 100% premium acrylic smooth exterior paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004 alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ (Two or more coat applied @ 1.43 ltr/10 Sqm over and including priming coat of exterior primer applied @ 0.90 ltr /10 sqm etc complete all as specified

M&L for complete removing of existing treatment on wall applying priming and finishing walls with acrylic smooth exterior paint of required shade: (Two or more coat applied @ 1.43 ltr/10 Sqm over and including priming coat of exterior primer applied @ 0.90 ltr /10 sqm etc complete all as specified

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

M&L for preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M&L for Exterior grade(Lequre coated), coloured glossy finish rubber pressed, cement concrete designer chequred tile of approved quality and size 300X300X 25mm thick set, jointed and pointed in neat cement slurry with grey cement with colour to match the shade of colour incl 15mm thick screed bed in CM 1:6 complete all as specified

Excavation in trenches n exc 1.5 m deep and n exc 1.5 m width and getting out in soft/loose soil complete all as specified and as directed

Returning filling in including spreading watering well ramming in layers n exc 25 cm thick complete all as specified and as directed

Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.50 m above the starting point.complete all as specified and as directed

M&L for PCC 1:4:8 type D2 (using 40mm graded aggregates) in foundation filling and mass concrete as in lean concrete complete all as specified and as directed

Surface excavation not exc 30cm deep and averaging 15cm deep in soft/loose soil, getting out, removing of vegetation, surplus soil etc to a distance not exceeding 50 metre and depositing at a level not exceeding 1.5 metre above the starting point, complete all as specified and directed.

M & L for rolling and consolidating formation surfaces in cutting with power roller exc 08 tonne and not exc 12 tonne, complete all as specified and directed.

M & L for 100 mm thick (spread thickness) Soling (or sub base)with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller to a uniform smooth surface, complete all as specified and directed.

M&L for laying 150mm thick (compacted thickness) WBM in two layers [each layer comprising of 75mm thick (compacted thickness)] with coarse aggregate of grading 2 (63 to 40 mm size) (lime stone, sand stone, flint or Quartzite), blinded with screening of hard stone of grading 'A', spread, rolled with power roller 8 to12 tonnes & consolidated to gradient/camber required etc, complete all as specified and directed.

M&L for preparation of unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc., sweeping with brooms & finally fanning the cleaned surface with gunny bags to remove all loose dirt and applying evenly a priming /tack coat with cationic bitumen emulsion SS-1 confirming to IS 8887 @ 0.70-1.00 kg/sqm on surface of WBM as specified in table 500-5 of MoRTH specification for road and bridge work 2013, using mechanical sprayer complete all as specified and directed.

M&L for applying evenly a priming /tack coat with cationic bitumen emulsion RS-1 confirming to IS 8887 @ 0.20-0.30 kg/sqm on bituminous surface as specified in Table 500-5 of MORTH specification for road and bridge work 2013, using mechanical sprayr, complete all as specified and directed.

M & L for thermoplastic road marking paint, white or golden yellow @ 5kg/Sqm, conforming to BS-3262 applied on road/pavement as in lines, dashes, arrows, letters etc, exc 10 cm in width & of thickness not less than 2mm, with and including combination of retro-reflective glass beads 300 gm/ Sqm all as per manufacturer's instructions, using special applicator machine etc, complete all as specified & directed.

Taking down carefully existing aluminium point wiring (light / fan / socket or power point) complete, with all fittings such as switch socket combination, switches, sockets, regulator, ceiling rose, utility light fittings and lamp holders etc and making good the disturbed surfaces of walls, roof and floor etc to match with the existing specification, complete all as specified and as directed.

Taking down old/unsv distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/Main Switch including old Unsv MCCBs/MCBs, isloators , etc and making good to disturbed surface complete all as specified and as directed.

M&L for concealed point wiring for one light point/ one fan point/ one exhaust fan controlled by 1 one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia, (also including conduit fittings, along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable for earth continuity wire, connected to earth dolly and to be terminated in and including factory made anodized pressed steel sunken boxes (Having wall thickness not less than 1.22 mm for boxes suitable size and beyond that the wall thickness shall be not less than 1.63 mm), concealed type with and including 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc, testing on completion also including cutting chases for concealed conduit, steel boxes etc, pinning in, making good the surfaces in CM (1:3) to for One light /Fan point controlled by one, one way switch match with the adjoining surfaces , complete all as specified and as directed.

All as per item No 106 here-in-before but for one fan point/exhaust fan point controlled by one way switch 5/6 Amp on the same board complete all as specified and as directed.

All as per item No 106 here-in-before but for one 3pin 5 Amp switch socket outlet,same board complete all as specified and as directed.

All as per item No 106 here-in-before but for one 3pin 5 Amp switch socket outlet, independent board complete all as specified and as directed.

All as per item No 106 here-in-before but for one 5/15 Amp switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLSH) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable for earth continuity wire, complete all as specified and as directed.

S&F Modular switch 1 way 6A, 1 module 230 volts , 50 Hz , complete all as specified and directed.

S&F Modular switch 1 way 16A, 1 module 230 volts , 50 Hz , complete all as specified and directed.

S & F for 2 module socket with shutter 25 Amps 240 volts including modular Metal flush box and cover Plate complete all as specified and directed

S & F for 2 module starter switch 25 Amps 240 volts including modular Metal flush box and cover Plate complete all as specified and directed

S & F Modular socket, 6A, 2/3 pin combined with shutter 2 module 230 volts , 50 Hz , complete all as specified and directed

S & F Modular socket, 6A/16A ,2/3 pin combined with shutter 2 module 230 volts , 50 Hz , complete all as specified and directed

S&F ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and as directed.

S & F Modular Regulator step type 120 watt, 2 module complete all as specified and directed.

S & F in repair of 36W LED square Type 2'x2' recessed mounted downlighter white powder coated CRCA housing high translucent frosted diffuser, efficacy.100lm /Watt, high performance electronic integral driver , THD,10%, PF.0.95 (warm,white/natural white Colour) & all accessories etc complete all as specified and as directed.

M & L for sand cushioning for protection of undergound cable consolidated and compacted with clean dry sand complete all as specified and as directed.

S & F MCB three pole and neutral rated capacity 40-100 Amps , 415 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Material and labour for sub main wiring with 2 run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 4sqmm and one single core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 4sqmm as in continuous earth wire drawn into and including concealed PVC conduit, medium grade of 20mm bore complete with fittings, PVC Junction Boxes, fixings accessories, also including cutting chases, pinning in, making good to facing and pointing in using cement mortar 1:3 and making good disturbed surfaces to match with the adjoining surfaces, including taking down existing sub main wiring complete all as specified and as directed. Note:- For payment purposes, 2 runs of main cable (each of 1RM) 1 run of earth continuity cable (1RM) and one run of conduit (1RM) all together shall be considered as "1RM".

S&F for sheet metal enclosure MCB, TPN, DB, 4 ways, in 200A rated bus bar 415 Volts double door, with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc, assembly complete including provision of blanking plates as required & fixed flush to wall and making good the disturbed surfaces in CM 1:3, complete all as specified and directed.

S&F MCB, SPN, DB, 8 ways, in 200A protection double door, with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc, insulated busbar 240 volts assembly complete including provision of blanking plates as required & fixed flush to wall and making good the disturbed surfaces in CM 1:3, complete all as specified and directed.

S & F single pole and neutral rated capacity upto 40 Amps, 240 Volts breaking capacity 10KA, 'C' Curve complete all as specified and as directed.

S&F MCB, SPN, DB, 4 ways, in 240A protection double door, with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc, insulated busbar 240 volts assembly complete including provision of blanking plates as required & fixed flush to wall and making good the disturbed surfaces in CM 1:3, complete all as specified and directed.

S & F MCB single pole neutral rated capacity 40 to 63 amp rating 240V, breaking capacity 10KA 'C' curve and current indication for individual pole and designed based on advanced current limiting hammer trip mechanism ,complete all as specified and directed.

S & F MCB single pole rated capacity 5 to 32 amp rating 240V, breaking capacity 10KA 'C' curve and current indication for individual pole and designed based on advanced current limiting hammer trip mechanism ,complete all as specified and directed.

S & F Decorative wall light fixture, brushed nickel finish, suitable for 9 W LED lamp (B22) including 9/10 W LED Bulb etc, complete with all accessories internally pre-wired and including connecting up with twin core twisted fiexible copper conductor cable suitable size, complete all as specified and directed.

Supply and fixing LED tube light batten type made of CRCA sheet with decorative end caps suitable with ultra bright glass LED tube light 1x18/20 watt T8 type single side connection complete with both end bi-pin holder and all accessories internally prewired and fixed to wall/celling incl fittings accessories and connecting up with twin core fexible copper conductor cable suitable size all as specified.

S & F for wall mounted LED tube light fitting 10 watts batten for surface mounted, anodized extruded aluminium housing , high transmissitivity diffuser , high lumen output box type fitting , 230 volts and intregated electronic driver connector block etc , complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193from ceiling rose to fitting complete all as specified and as directed.

M & L for XLPE insulated GI/strip armoured electric power cable (Heavy duty) with stranded aluminium conductor 1100 volts grade , cross sectional area 16 Sqmm 4 core laid in trench /poles/on wall complete all as specified and as directed.

M & L for well burnt bricks Sub class 'B' Bricks best quality locally available laid flat, dry in trenches for FRLS cable protection complete all as specified and as directed.

S & F energy saving new generator enviromental friendly long life versatile presure die cast aluminium IP 66 for securty ligh fitting luminaire with high power LEDs as light source (100 Im/watt) with LDR sensor for automatic ON/OFF operation and electronic driver of capacity 25 watts with pre-wired and necessary mounting arrangements and provison of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut bolts including painting of mild steel flat iron surfaces with two coats of synthetic enamel paint over a coat of red oxide primer , complete all as directed by Engineer-in-charge.

Taking down ceiling fan/exhaust fan any sweep and depositing the same to MES store yard complete all as specified and directed

S&F energy saving BLDC ceiling fans 1200mm sweep 230 volts 50 Hz 5 star BEE rated with brushless direct current motor (BLDC) , energy saving, 100% copper wound motor with anti corrosive alluminium blades of minimum thickness 1.10mm powder coated finished , double bell bearing service value 6.00, BIS certified and on site 5 years of warranty, wattage range 26-32 watts, min air delivery 220 CFM (+/-2%) with service value 6.50 ; complete all as specified and as directed.

Supply and fixing GI pipe 40 mm bore medium grade with all fittings fixed to wall for hanging of ceiling fan only complete all as specified and as directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600 mm X 600 mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, connected to galvanised earth strip 25x4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, PCC (1:3:6) type C-1 with 50 mm thick Pre-cast RCC (1:2:4) type B-1 cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (Medium grade), wire mesh, aluminium lugs, complete in all respect, GI earth strip protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 m and necessary testing on completion, including dismantling old unsv ones complete all as specified . Note: GI earth strip 25x4mm dia and 40mm bore protection pipe upto 7.5m from earth plate is deemed to be included in the rate quoted be contrator.

Please Enable Macros to View BoQ information