Supply and Erection of Light Fittings and Switch Boards in Various MCC Centre at Pollachi Municipality

Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLScopper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator)

Wiring with 2 x1.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non interlocking Wall socket with 5A flushtype switch with painting of suitable colour with continuous earth wire connection of 1.5sq.mm copper wire for open PVC plug point

Supply and fixing of 4 Feet LED 18W Fitting with LED 18W tube(HigherEnd) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting

Supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting .

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting .

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb

Carefully remove the existing wall-mounting fan from the Kottur Road library premises.Take out the damaged/old motor assembly .Supply & Replacement Supply a new suitable motor assembly compatible with the existing wall-mounting fan model.Install the new motor assembly with proper alignment and fittings.Servicing Clean the fan blades, guards, and body.Lubricate bearings/necessary moving parts.Check and tighten all fasteners.Ensure proper electrical insulation and wiring.Re-fix the wall-mounting fan at the same location using standard mounting hardware. Connect electrical wiring and test the fan for smooth operation.Ensure the fan runs without vibration and noise

Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of 120W LED street light fitting with LED (Lower end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting.

Miniature Circuit Breakers 240 V / 415v 50hz - Ac Supply Suitable For Both Lighting And Motor Circuits - Higher End

Four Pole 6 A to 32A, 10KA

Double Pole 6A to 32A, 10KA

Single Pole 6A to 32A, 10KA