Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.0 LAccepted-AOC | L1 | Accepted-AOC Lowest tenderer | |
| 2 | L2₹9.0 L+₹1,400 (0.16%)Rejected-Finance 0 MANPUR CHITBARAGAON CHITBARAGAON BALLIA UTTAR PRADESH 221713 | BALLIA | UTTAR PRADESH | 221713 | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹9.2 L+₹24,663 (2.75%)Rejected-Finance | L3 | Rejected-Finance Other than lowest tenderer | |
| 4 | L4₹10.0 L+₹99,040 (11.0%)Rejected-Finance | L4 | Rejected-Finance Other than lowest tenderer | |
| 5 | L5₹11.2 L+₹2.3 L (25.4%)Rejected-Finance | L5 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹9.7 L
EMD Value
₹19,400
Closing Date
11 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) CIF (R)
AGE (I) CIF (R) C/O 56 APO
PROVN OF BRICKS SECURITY WALL AT THANAMANDI UNDER AGE (I) CIF (R).
2023_MES_585458_1
AGE(I)/R-01/2023-24
Open Tender
Civil Works
Item Rate
120 days
THANAMANDI
Class E and above and category a (i)
8 documents required · 8 mandatory
₹500
AGE (I) CIF (R)
₹19,400
Yes
29 Apr 2023
11 Mar 2023
15 Apr 2023
11 Mar 2023
11 Apr 2023
27 Mar 2023
Amount
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and directed.
M & L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate for base foundation of pole all as specified and as directed by Engineer-in-Charge.
Mild Steel TMT bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.
Mild Steel TMT bars 6 to 8 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.
Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, contilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough furnished surface of concrete complete flat, all as specified.
Reinforced cement concrete M-25 (Design Mix) ( using 20 mm graded aggregate) as in roof beams, cantilevers, bressummers, lintel over 1.5m clear span complete , all as specified.
M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4, complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and smooth complete all as specified and directed by engr-in-charge.
Rendering 15mm thick cement plaster on stone masonry surfaces or other than fair faces of brick work CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.
Mild steel work as in posts and struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire , etc., including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe-290 Gde E-165 complete, all as specified .
S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provison of galvanised mild steel wire, staples or steel pins (each line of wire to be measured), complete all as specified and directed.
S&F punched tape concertina coil 600 mm dia of short profile with hot dip galvanized steel spring core coil shall be strength as per AGE (I), etc all as directed complete all as specified and directed Make of concertina coil shall be approved by AGE (I).
Prepration of new or previously steel surfaces any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed by engr-in-charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm in any type of soil complete all as specified and directed.
Removing surplus spoil to a distance not exceeding 50m and deposited where directed at a level not exceeding 1.50m from the starting point., all as specified .
Broken glass coping on top of walls in cement mortar 1:3 with 25 mm thick layer of cement mortar, broken glass of 63 mm gauge @ 10 Kg/Sqm be embeded on rendered surfaces, complete all as specified .
Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ Nil during AOC Note:- Tenderers shall not quote for this Schedule
NATIONAL TRADING COMPANY
M/S KHAN ENTERPRISES
Modh Hafiz Khan
M/S ARSHID AJAZ KHAN CONTRACTOR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .