Construction of building of Govt. College Jassia (Rohtak) (Pdg. LAN System only)

Amount

Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work. (Based on HSR)

S/E/T/C of 6 Core optical fibre cable with GI Wire for support, it is an assembly similar to an electrical cable, but containing one or more optical fibers that are used to carry light. The optical fiber elements are typically individually coated with plastic layers and contained in a protective tube suitable for the environment where the cable will be deployed complete in all respect. Make:- Reliance/Ericsson/Molex/ Beldon

S/E/T/C of optical fibre patch cord Easy-to-use clips for easier polarity management Size: 2 mtr. Make: R&M/Simon/Molex

S/E/T/C of single phase 240 volt AC 2 KVA online UPS with batteries back, APC / Luminous / Albert/ Microtek make, with 3 no.s 26 Amph. Battery Exide/Okaya/ Sukam make along with stand to Complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work

S/E/T/C of UTP Cat-6 cable in existing pipe / channel complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work Make: AMP / D-link/ Schnieder

S/E/T/C of PVC Industrial Channel 45mm*45mm Size complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work Make: DLINK / AMP/SGI/

S/E/T/C of UTP Cat-6 information outlet complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work. Make: AMP/ D-link/ Lucent

S/E/T/C of Face plate (Single / Dual) complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work. Make:AMP/ D-link/ Lucent

S/E/T/C of UTP Cat-6 Mounting Patch Cords complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work. Make: AMP/I-Ball/ Dlink

a) 3 ft length

b) 5 ft length

Supply of Switch with 24 port 10/100/1000 POE Mbps+2 combo 1000 Mbps switch with minimum 130 watts power budget and all ports should have inbuilt 6 KV surge protection. The switch should have IGMP Snooping v1,v2 and MLD Snooping, The switch should have spanning tree 802.1d, 802.1w Support, Loopback detection and G8032 ERPS, Operating Temprature-5 to 500C (23 to 1220F) Switch should be CE,FCC,UL,BSMI,VCCI,cUL,LVD,CB,CCC Complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. Make: Juniper / Cisco/ Ericsson/ D-link).

Port standard IEEE 802.3 10BASE Ethernet (twisted pair copper) IEEE 802.3U 100 BASE - TX fast Ethernet (Twisted pair copper), IEEE 802AB 1000 BASE T Giga bit Ethernet (Twisted pair copper), IEEE 802.3Z Giga bit Ethernet (Fibre) ANSI / IEEE 802.3 auto negotiation, IEEE 802.3X flow control, interface: 24 10/100/1000 mbps base Tx-4 SFP combo and 4 SFP + UL, CE/IC,FCC, ROHS II. Protocol SNMP V1/V2/V3, IGMP V1/MLD V2, DHCP Safety client / Relay, Layer 2 and layer 3 ACL, Surge protection, Internal/external Redundant Power supply , SD card slot/ USB / External flash for easy file store and restoration like firmware, configuration file, Boot image, syslog, 1 GB DRAM AND 1GB flash, management port and alarm port protocol; ARP Gratutious ARP, 802.1 Q VLAN encapsulation 802.1v Protocol base VLAN and MAC Based VLANS, GVRP, QinQ Multivcast VLAN, 802.1D STP, MSTP, RSTP and LOOP Back detection layer 3 Routing features should support static routing for Ipv4 and Ipv6 for IPV4 and RIPng for IPV6 OSPF, OSPF v3, BGP4, BGP4+ IS-ISV4/V6 and MPLS from day 1, PIM-SM/PIM-DM/PIM-SDM/PIM-SMv6,DVMRP v3 and MSDP, VRRP v2 &v3 should support 802.1p priority queuing with 8 queues per port. Non Blocking Architecture of minimum 128 GBPS Backplane & 94 MPPS throuput. Make: Juniper / Cisco/ Ericsson/ D-link).

S/E/T/C 12 U rack including power distribution kit, cable Manager complete in all respect HCL/ Comrack / PRESIDENT make with fan to Complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. .

S/E/T/C of 24 port Cat-6 jack patch panel complete as per specification up to the entire satisfaction of Engineer-in-Charge of the work. Make: AMP/D-link/ Panduit/ Lucent

S/E/T/C of Cable manager complete as per specification up to the entire satisfaction of Engineer-in-Charge of the work. Make: AMP/D-link/ Panduit/ Lucent