Repairs/ Replacement of light fittings DBs Earthings and rewiring with connected accessories for units under HQ ACC and S including KK Ranges under GE (N) Ahmednagar

Amount

Taking down existing Tube light fittings of any type and any wattage for repair and re-fixing the same after repairs to its orginal position including replacement of cable PVC insulated unsheathed with copper conductor of size 1.5 Sqmm (2 runs) upto 0.5 mtr length from light fitting to Ceiling rose including connections all as directed.

Supply and fix Decorative ultra slim square profile LED lighting fixture with extruded metal batten with refreshing design, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 22 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including 2 core sheathed cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge Make:Phillips mirolta Essential or equvilanet Make

S&F Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 10 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with 2 core seathed copper conductor cable of size 0.5 Sqmm with etc complete all as specified and directed by Engineer-in-ChargeMake: Phillips Slim line Next or equvalent in Make .

Supply & fix in replacement energy saving and environmental friendly long life LED street light 30 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with & including twin core twisted flexible copper conductor cable of suitable size of 230V , 50 HZ etc complete all as specified and directed by Engineer-in-Charge .

S&F Decorative, wall mounting fixture, in durable plastic body & designer mesh in gold finish , suitable for 14 W retrofit CFL/LED (B-22 base) with and including lamp holders, connector block and retrofit type LED lamp 1 x 10 W (including suitable LED Lamp 9/10 W), complete with all accessories prewired and including connecting up with & including twin core, twisted flexible copper conductor cable of suitable size etc complete all as specified and directed by Engineer-in-Charge Make - Havell's Cat Part No: (GLAZE Upto 14 W Retrifit CFL (B22) LHFOECE1TZ1B014 or equivalent in make of Philips/ wipro

Supply and fix environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-light 10 W LED luminaire comprising of high brightness LEDs complete with all accessories prewired and including connecting up with and including twin core twisted flexible copper conductor cable all as specified & directed.

Supply & fix 36 Watt LED Panel 2X2 environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for armstrong/Grid ceiling, complete with separate electronic driver ceiling light 36 Watt with and including connecting up with & including twin core, twisted, flexible copper conductor cable of suitable size 230 Volt, 50 HZ etc complete all as specified and directed by Engineer-in-Charge Make: Bajaj/Crompton/Phillips

Supply & fix Round shape, 12 Watt LED downlighter with high efficacy LEDS, ideally suited for low ceiling areas to give glare free light, complete with and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size 230V , 50 HZ etc complete all as specified and directed by Engineer-in-Charge Make: Havell's Cat No: (EDGEPRO ROUND) EDGEPRORDDLR12WLED840S or equivalent in makes mentioned in list

Supply & fix Square shape 6 Watt LED downlighter with high efficiencey LEDS, ideally suited for low ceiling areas to give glare free light , complete with including connecting up with and including twin core twisted flexible copper conductor cable of suitable size of 230V, 50 HZ etc complete all as specified and directed by Engineer-in-Charge Make: Havell's Cat No: (EDGEPRO SQUARE) EDGEPROSQDLR6WLED840S or equivalent in makes mentioned in list of makes

Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors etc complete all as specified and directed Engineer-in-Chage

M&L for point wiring complete concealed type with two runs of 1.5 Sqmm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS stranded cable drawn through and including PVC rigid conduit not less than 20 mm dia with its accessories and provn of CI / pressed steel terminal switch box powder coated with and including 3mm thick white bakelite plastic laminated top sheet cover and fixed with brass screws, cup washer for fixing switches / socket / regulators etc with and including 1.5 Sqmm, Single Core, multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS stranded cable as earth continuity conductor to common earth & connecting to earth dolly for the following etc complete all as specified and directed by Engineer-in-Charge. Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Wiring shall be done as per complaints received from users. 3. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc

One light poin/Fan point/bell pointt controlled by switch 5 Amp single pole one way

One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch

One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board

All as per Item No 11 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase, Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 Sqmm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable drawn through and including PVC Casing and capping ISI Marked with its accessories and provn of CI/pressed steel terminal switch box powder coated and with and including 3mm thick white bakelite plastic laminated top sheet cover and fixed with brass screws cup washer for fixing switches/socket/regulators etc with and including 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable as earth continuity conductor to common earth & connecting to earth dolly for the following etc complete all as specified and directed by Engineer-in-Charge. Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2.Wiring shall be done as per complaints received from user 3. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc

One light poin/Fan point/bell point controlled by switch 5 Amp single pole one way

One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch

One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board

All as per Item No 16 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase, Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 Sqmm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable drawn through and including PVC Casing and capping ISI Marked with its accessories and provn of CI/pressed steel terminal switch box powder coated and with and including 3mm thick white bakelite plastic laminated top sheet cover and fixed with brass screws cup washer (upto 18 module suitble for Mylinc series of Legrand with and including white plates with frame upto 18 module of make suitable for Mylinc Series) for fixing switches/socket/regulators etc with and including 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable as earth continuity conductor to common earth & connecting to earth dolly for the following, etc complete all as specified and directed by Engineer-in-Charge. Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2.Wiring shall be done as per complaints received from user 3. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc

One light poin/Fan point/bell point controlled by switch 5 Amp single pole one way

One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch

One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board

One light point controlled by switch 5 Amp single pole two way

All as per Item No 21 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase , Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board

S&F switch piano flush type single pole, one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge

S&F Socket, 6 Amp,3 Pin 230V AC etc complete all as specified and directed by Engineer-in-Charge.

S &F Switch piano, flush type single pole, one way 16 Amps

S & F Socket outlet 2 in 1 3 pin, 6/16 Amp, flush type

S&F bell push piano flush, single pole, one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge

S&F bell ding dong elelctric 230V AC single pole etc complete all as specified and directed by Engineer-in-Charge

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required etc complete all as specified and directed by Engineer-in-Charge.

S & F electronic dimmers,as per existing wattage, 250V flush type on the exiting phenolic laminated sheet etc. as required etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 6 Amp, one way, one Module as per existing. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 6 Amp, two way, one Module. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 16 Amp, onw way, one Module as per existing. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Socket Outlet 6 Amp, 2/3 pin, combined two module etc as per existing complete all as specified and directed by Engineer-in-Charge.

S&F Modular Socket Outlet 6 Amp / 16 Amp - 2/3 pin combined two module as per existing etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Bell push, 6 Amp, one module etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Fan Regulator Fan step regulator, 120 Watt - two module etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge .

M&L ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge

S & F in replacement double door Sheet metal enclosures factory made Vertical DBs Concealed in wall 4 way TPN, 415 volts ,protection class IP-42, including 63 Amps MCCBs Input and suitable for fixing of outgoing MCBs, etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,or equivalent in Simens/ L&T

S & F in replacement double door Sheet metal enclosures factory made DBs 4 way TPN, 415 volts ,protection class IP-42, suitable for fixing of MCBs, etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,or equivalent in Simens/ L&T

S & F in replacement double door Sheet metal enclosures factory made DBs SPN, 8 way ,240 volts ,protection class IP-42,Concealed in wall suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand / Simens/ L&T

S & F in replacement double door Sheet metal enclosures factory made DBs 4 way SPN, 240 volts ,Concealed in wall protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand / Simens/ L&T/Havells

Supply & fixing MCB , SP, AC, 240 Volts of 06 to 40 Amp capacity 16KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge Make: Legrand / Havells/ L&T

Supply & fixing MCBs, TPN, AC, 415 volts of 63 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge Make: Legrand / Havells/ L&T

Supply & fixing MCBs, SPN, AC, 240 volts of 40 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge Make: Legrand / Havells/ L&T

Taking out old PVC/Wooden/metal switch board ,wire connection from the wall and fix new PVC Cutting sheet board box including connecting wire suitable for fixing switch/Socket/fan regulater of following sizes .(Note.Damaged Switch/Socket/regulator will be measured and paid Sepereately)

(a) 4x4 inches

(b) 4x6 inches

(c) 6x8 inches

(d) 8x10 inches

(e)10x12 inches

Supply & fix replacemnt industrial type switch socket for Geysers with 20 Amp MCB etc complete all as specified and directed by Engineer-in-Charge

S&F sub main wiring with two single core PVC insulated,unsheathed, FRLS stranded copper conductor cable 4 Sqmm with 4 Sqmm PVC insulated, unsheathed, FRLS stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 4 Sqmm cable i.e for one run for phase, one run for neutral with one run of 4 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit.

S&F sub main wiring three phase with 6 Sqmm single core,4 Run PVC insulated,unsheathed, FRLSH stranded copper conductor cable with 6 Sqmm,one Run PVC insulated, unsheathed, FRLSH stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge Note : 1. Proper colour coding must be utilize for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Three run of 6 sq.mm cable i.e for three run for phase, one run for neutral with one run of 6 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit

S&F sub main wiring with two single core PVC insulated,unsheathed, FRLSH stranded copper conductor cable 6 Sqmm with 6 Sqmm PVC insulated, unsheathed, FRLSH stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge . Note : 1. Proper colour coding must be utilize for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 6 sq.mm cable i.e for one run for phase, one run for neutral with one run of 6 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit

S&F service cable 1100V grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended with insulating hanger not more than 1 m apart including 4 mm dia suspension wire alongwith 4 Sqmm twin core flat cable etc complete all as specified and directed by Engineer-in-Charge

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. Earth pit not less than 2.25 m depth and top edge of the earth plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts & washer etc. Earth wire connected upto main earth point / DBs alongwith 15mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 using granded stone aggregate and RCC pit cover 50 mm thick precost RCC (1:2:4) mix type B1 duly reinforced with 8 mm dia of TMT bar @ 100 mm CIC, both way, lifting arrangement complete including all necessary earth work etc complete all as specified and directed by Engineer-in-Charge

Taking out/down carefully and opening of existing water Geysers of 25 Ltrs capacity,from any position, of any make etc & refixing after reassembling and after repair /replacement of spare parts/ material/items ( such as outer and inner tank) at the desired location and making necessary water inlet, outlet & electric connections to make it functional with including using material/parts of minor nature such as screws, insulation tape, nuts, bolts, washers etc including cleaning complete all as specified and directed by Engineer-in-Charge.Note: Replacement of spare parts will be measured and paid seperetely.

Supply and fixing in replacement of base assembly suitable for 25 ltrs capacity geyser with inlet and outlet pipe made out of steel base plate with gasket , proper size of nuts, bolts & washers etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement element 1.5 KW/2 KW, rubber gasket type with & including rubber gasket complete suitable for 25 Ltrs Geysers of any Make as installed at site etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement PVC insulated cable 40/0.0076, 3 core copper conductor cable for connection from geyser to top plug etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement safety valve(pressure release valve) suitable for 25/50 ltrs capacity vertical type geyser etc complete all as specified and directed by Engineer-in-Charge.

Taking out Geyser from site ,and spray painting of complete geyser and writing the MES No with black complete all as specified and directed

Supply and fix steel tank sheet suitable for 25 ltrs geyser capacity of any Make as installed at site etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement brass, non return valve 15 mm bore suitable for 25/50 ltrs capacity vertical type geyser of any make as installed at site etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement indicator lamps(set of two -green & red) AC, 220 volts suitable for 25/50 ltrs capacity vertical type geyser etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement thermostat switch , pointer type with adjustable knob, suitable for 25/50 ltrs capacity vertical type geyser & etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix PVC connection pipe complete with brass end terminal size 300 mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix PVC connection pipe complete with brass end terminal size 450 mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement thermal cut out suitable for 25/50 ltrs capacity vertical type geyser etc complete all as specified and directed by Engineer-in-Charge.

S & F for plastic body exhaust fan, AC single phase, 240 V of size 150 mm sweep with louvers (as per Cat Part No -698500 Ivory new of Make- Indo Asian or Bajaj Maxima DX/ Usha Striker) including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed

S & F for plastic body exhaust fan, AC single phase, 240 V of size 200 mm sweep with louvers (as per Cat Part No -698501 of Make Indo Asian or equivalent Make- of crompton/Havells/Bajaj)including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed

Taking out/down and opening of existing ceiling fans upto 1400 mm sweep,from any position, of any make etc & refixing at the desired location after reassembling and after servicing/overhauling by thouroghly cleaning the shaft,rotor,stator and applying lubricant/grease to bearings and appllying one coat of super enamelled varnish over winding to improve the insulation resistance including repair /replacement of spare parts/ material/items, (such as bearing & conopy) making electric connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.50 Sqmm upto 0.50 Mtr length with & including using material/parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, washers etc after cleaning the metal surface, greasing/lubricant etc to make it functional etc complete all as specified and directed by Engineer-in-Charge. Note:- (i) Bearing & Canopy will be measured and paid separated as supply only under relevant item of this BOQ

Opening of ceiling fans upto 1400 mm sweep, of any make and old type pattern ceiling fan etc from the store yard of AGE E/M , removing burnt out defective unserviceable winding & rewinding with approopriate size of super enamelled copper wire including applying super enamelled varnishing over winding, drying etc, reassembling and fixing after repair /replacement of spare parts/ material/items (such as bearing and Canopy) at the desired location including making electric connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.50 Sqmm upto 0.50 Mtr length with & including using material/parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, clamps, washers etc including painting and cleaning the metal surface, greasing/lubricant etc to make it functional etc complete all as specified and directed by Engineer-in-Charge. Note:- (i) Quotated rates include cost for transportation from AGE E/M Store to Worksp & Back. (ii) Bearing & Canopy will be measured and paid separated as supply only under relevant item of this BOQ

Supply only Ball bearing No 6201 etc complete all as specified and directed by Engineer-in-Charge.

Supply only Ball bearing No 6202 etc complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement capacitor 2.5 mfd, 240 volts , AC etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of rubber reel, bolt, nut including pin etc complete all as specified and directed by Engineer-in-Charge.

S & F Fan regulator 100 W with 360° rotation 2 module etc complete all as specified and directed by Engineer-in-Charge.

Supply only conopy (top and bottom) of ceiling fan , of any sweep, any make etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of set of blades (set of three) made of aluminium suitable for 1200 mm sweep ceiling fans , of any tint, including provision of brass screws for fixing etc complete all as specified and directed by Engineer-in-Charge Make:- Bajaj/Crompton Greaves/Havells/Khetan

Supply and fixing in replacement of down rod 0.60 Mtr long made out of 15 mm bore medium grade GI pipe with & including clamp, nuts , bolts, split pins , washers , threading etc and making connections to make it functional etc complete all as specified and directed by Engineer-in-Charge.

Taking down/out and Opening of existing exhaust fans of 300/450 mm sweep, of any make etc., refixing at the desired location after reassembling and after servicing/overhauling by thouroghly cleaning the shaft,rotor,stator and applying lubricant/grease to bearings and one coat of super enamelled varnish over winding to improve the insulation resistance including repair /replacement of spare parts/ material/items,making electric connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.50 Sqmm upto 0.50 Mtr length with & including using material/parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, clamps, washers etc after cleaning the metal surface, greasing/lubricant etc to make it functional etc complete all as specified and directed by Engineer-in-Charge. Note:- (i) The connected items required like capacitor,Bearings,Bush, etc will be measured and paid sperately under respective items

Supply & fixing in replacement capacitor 3.5 mfd, 250 volts , AC etc complete all as specified and directed by Engineer-in-Charge.

Taking out and Opening of existing exhaust fans 300 mm size, of any make etc from the store yard of AGE E/M , removing burnt out defective unserviceable winding & rewinding with appropriate size of super enamelled copper wire including varnishing, drying etc , reassembling and fixing at the desired location after replacing items/ material including making electric connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.50 Sqmm upto 0.50 Mtr length with & including using material/parts of minor nature such as screws, nuts, bolts, washers etc including cleaning the metal surface, lubricant/greasing etc to make it functional etc complete all as specified and directed by Engineer-in-Charge. Note:- (i) Quotated rates inclues cost for transportation from AGE E/M Store to Worksp & Back. (ii) The connected items required like capacitor,Bearings,Bush,etc will be measured and paid sperately under respective item of this BOQ

All as per item no. 90 (here-in-before) but of 450 mm size etc complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement Bearing of exhaust fan 450 mm AC etc complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement Bearing of exhaust fan 300 mm AC etc complete all as specified and directed by Engineer-in-Charge.

An amount of Rs 79,690.00 shall be deducted from BOQ on account of schedule of credit

vedant engineering enterprises

Ms. S.K. ASSOCIATES

KESARI AND SONS

VAIBHAVI ELECTRICALS