REPAIR REPLACEMENT TO PLASTERING WORK PLINTH PROTECTION CHEMICAL PLASTERING KOTA STONE FLOORING AND TILLING AND REPAIR TO LEEKAGE SEEPAGE ROOFING SHEETS FALSE CEILING WATER PROOFING TO ROOF AND FACIAS ENDURATILES PLASTERING AND OTHER ASSOCIATED B R W

Amount

Taking down cement plaster of any description on bricks walls etc, including racking out joints, hacking for keys, scrubbing down with water etc all as specified.

M&L for 15mm thick rendering in CM (1:6) on fair faces of brick/concrete surfaces finished even and fair including necessary and steel scaffolding for working platform etc all as specified.

M&L for 15mm thick rendering in CM (1:4) on fair faces of brick/concrete surfaces finished even and fair including necessary and steel scaffolding for working platform etc complete all as specified.

M&L for 5mm thick rendering in CM (1:3) on fair faces of brick/concrete finished even and fair on ceiling without using extra cement including necessary and steel scaffolding for working platformm for four story building etc complete all as specified.

Demoltion of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified.

M&L brick work with sub class "B" bricks straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) all as specified.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper, over a coat of primer over 3mm thick wall care putty on walls complete all as specified

Preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified.

M&L two coats of cement base paint on newly plastered surfaces of walls over a coat of primer including preparation of surfaces all as specified.

Demolition of cement concrete unreinforced in floor incl tiles in ground floor and paving n.exc 15 CM thickness (below or above GL) all as specified.

M&L providing cement concrete type B-O (1:2:4), using 12.50mm graded stone aggregate as in roof kerbs, benching, rounded or chamfered on edges all as specified.

PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate in foundation/bed all as specified.

M&L for screed bed or bedding layer 15 mm thick in cement mortar 1:4 mixed with water proofing compound as per manufactoring instruction, finished even and smooth without using extra cement over cement slurry @ 3 Kg per sqm. Note:- WPC Shall be measured and paid seperatly

M&L Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the rati of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.

M&L for 10mm thick rendering in CM (1:3) as in old RCC roof surfaces and sunken or concrete surfaces mixed with water proofing compound finished fair and even complete all as specified.

Supply only water proofing compound ISI marked all as per specified.

S&F APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5 Kg/sqm , reinforced with polyster non-woven fabric (weighing not less than 150 gm/sqm and upper side of membrane thermally insulated with white mineral gravel finish, informaly embadded during manufacturing process shall only be used. It shall be laid by torch application,side overlaps shall be 75mm and the ends shall be 100mm and all over laps shall be sealed by torch application including applying a coat of cold applied bitumen primer conforming to IS:[email protected]/sqm & applied a Hot blown coat of bitumen layer spread over primer @ 2.0 Kg/Sqm complete all as specified.

M&L PCC (1:3:6) type C-2, using 40mm graded stone aggregate, 75mm thick finished even & smooth without using extra cement complete all as specified.

M & L for Endura Designer Collection Series of Jhonson Tiles ,Kajaria or somani tile of size 300x300x10 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 15mm thick base of cement mortar 1:4 in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete all as specified.

M&L for coloured/ matte finish Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , over and including 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L for Coloured/matt finish Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, over and including 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified.

M&L for Vitrified ceramic tiles 10 mm thick (Square / rectangular) area of each tile not exceeding 0.36 sqm , over 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiling to store and rubbish off the premises complete all as specified.

Dismantling of stone slab and tiles of any description or thickness in floors, etc laid beded and pointed in any mortar Complete all as specified.

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in over and including 15mm thick screed bed in cm 1:4 and pointing in white cement (1:2) us?ing marble dust with admix?ture of pigment to match with shade of granite complete all as specified.

M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed 20 mm thick in cement mortar 1:6, laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed 15 mm thick in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

Cutting, polishing to existing Kota/ marble flooring,mirror polishing including levelling certain places to Kota/ marble floor ,necessary repair work complete all as specified.

Demolition and breaking up drain pipes (SGSW, AC or reinforced cement) set in cement mortor internal dia of pipe 100mm complete all as specified.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified.

Dismantling of cast iron drain pipes & fittings, jointed in cement mortar and taking out of trench required internal dia of pipe 75 to 100mm complete all as specified.

S&F 100mm bore cast iron soil waste and vent pipe (spun pipe) in any length with or without ears with cement joints fixed to walls/ceiling or laid in floor complete all as specified.

All as item No 32 abovebut 75mm dia complete all as specified.

M&L cast iron Nahani trap 75mm out let dia with grating incluiding jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate complete all as specified.

S&F in repair brass CP shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified.

S&F in repair vitreous china wash hand basin, white, of size 550x400mm flat back excluding taps, waste, chain and plug but including brackets, cutting for and pinning in ends of brackets complete all as specified.

Dismantling existing water tank of capacity exc 250 ltrs & n. exc. 500 ltrs and S&F tripple layer Rotational moulded polyethylene water storage tanks 500 Ltr (cylinderical vertical with closed top)with 20mm dia ball brass valves,high pressure , with polythene float and flynut complete, hoisted and fixed in position all as specified in SSR Part-I.

Dismantling existing water tank of capacity exc 500 ltrs & n. exc. 1000 ltrs and S&F tripple layer Rotational moulded polyethylene water storage tanks 1000 Ltr (cylinderical vertical with closed top)with 20mm dia ball brass valves,high pressure , with polythene float and flynut complete, hoisted and fixed in position all as specified in SSR Part-I.

S & F in repair of vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, 'P' or 'S' trap, including connection to trap, and to flushing pipe, anti-syphonage pipe etc. complete including making good to floor matching with existing complete all as specified.

S&F in repair of pillar tap, cast copper alloy with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm borecomplete all as specified.

S&F in repair bib taps cast copper alloys with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule & fixed for 15mm bore GI pipe complete all as specified.

S&F in repair chromium plated15mm bore stop valve/Angle valve cast copper alloys, screwed down high pressure with crutch or butterfuly handle , screwed both ends for iron pipe or for unions and fixed complete all as specified.

S&F in repair of PVC low level flushing cistern 10 ltrs capacity with inlet ball valve float & handle, syphonic action type including brackets & flush pipe of polythelene 32mm dia complete all as specified.

M&L 15mm bore GI tubing medium grade ISI marked with all fittings and fixed complete to walls, ceiling or laid in floor including taking down existing pipe complete all as specified.

All as per item 44 above but 20mm bore tubing complete all as specified.

S & F powder coated Anodised Aluminium frame for door,windows,vantilators with one or more rebates including joining cleats for fixing etc complete all as specified.

S & F powder coated Aluminium door shutter, aluminium section weighing 0.55kg/m including necessary joining cleats glazing clips,rubber neoprene packing handles, 2 Nos in each door,hinges (03 Nos) anodized aluminium, snap beading screw in each shutter etc complete all as specified.

S&F powder coated Anodised aluminium window and ventilators shutters,side hung type without sash bars,aluminium section weighting 0.55 kg/m including necessary joining cleats,glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long 1 nos ,hinges type B-21 100 mm long 02Nos suitable handle 01Nos in each shutter complete all as specified.

S&F in Replacement double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as specified.

S&F in repair Aluminium extruded section body door closer hydraulically regulated designation no 3 universal type suitable for door shutter up to 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation, boards/slabs/blankets, any thickness, including cover fillets and frame work Complete all as specified.

S&F PVC wall panelling with panel of 300 mm x 4 mm Hollow section of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC angle fixed with solvent cement complete all as specified.

M&L for providing and fixing Gypsum Board 12 mm thick in ceiling fixed with screws Complete all as specified.

S&F anodised aluminium snap grid frame work of size 605x605mm for false ceiling Complete all as specified.

S&F hangers 6mm dia. G.i. (up to 1200 mm length ) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long and hold fasterners 12.5mm dia 40mm long.complete all as specified.

M&L for greasing and easing of rolling shutter of size not exc 18 sqm alongith the guide channel, spring,anchoring and all other as to work the shutter in easy way and complete all as specified.

S&F in repair Safety lever locks mild steel with 4 levers for rolling shutters all as specified.

S&F in repair Ball bearing for rolling shutters all as specified.

Taking down chowkats or frames n. exc 1.5 sqm each with shutters (without taking off shutters from the frame) Complete all as specified.

Taking down shutter of any description area exc 1 sqm and n. exc 2 Sqm each Complete all as specified.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete all as specified. Note:- Rate of Door Handle ,Lock & floor spring etc deemed to be in included in quoted rate )

S & F colour powder coated mild steel continuous (piano) hinge, width of flaps(when open) 30mm complete all as specified.

S &F 18mm thick solid PVC ply of first quality of one side prelaminated of approved colour and one side white colour fixed with screw 'solvent cement/adhesive to make cupboard shutter complete all as specified.

S & F stainless steel handle of 110mm size of best quality complete all as specified.

S & F magnet catch for kitchen cabinet shutter as per approved sample complete all as specified.

M&L for two coat of exterior emulsion paint over a coat of primer , white or tinted including preparation of newly plastered surfaces all as specified .

M&L for three coats of white wash on new plastered or unplastered surfaces of wall including prepration of surfaces all as specified.

Taking down old existing unserviceable cement plaster, loose / unsound weaken cement concrete of any description and in any position from existing external / internal surfaces of RCC roof / slab / beams / columns / RCC facias, or any surface average depth 25mm (Approx height 15.0 m from natural ground level) with power driven of pneumatic chisel and and removal up to the approval municipal dumping grounds specified by the local bodies outside MOD land including cutting of all edges, making square shoulders of the cavities, roughening the smooth surfaces, scrapping out / removing corrosion all loose / scale / rust etc from the visible unplastered surface and applying one coat of styrene butadiene polymerized cement mortar Modifier TM-BOND® SBR or AR. Make of -Thermax/chemco system/webac chemicals. for B/P the surface before application of rheoplastic cementious based repair conforming to BS 6319. Ensuring no porosity in new surface.Complete all as specified . Note:- Item shall be carried out by authorised applicator of manufactuer.

M&L for providing 25 mm thick one COMPONENT BS 5F chloride free thixotropic fibre reinforced polymer modified repair mortar 5F complies with ASTM C 109 with flexural strength ASTM C 348 @ 7 days meeting 7N/mm2 and tensile strength @ 7 days (ASTM C 307) >3 N/mm2 at the outer or inner Brick or stone walls in cement mortar in the ratio 1:4 mixed with styrene butydiene polymerized cement mortar Modifier TM-BOND® SBR or AR for bonding with cementious mortar specially adhered to BS 6319 having specific gravity of 1.025 to 1.04, minimum 43% solid contents) not less than 2% by weight of cement and as per manufacturer,s instructions. for external or internal surface of RCC /slab /beam /columns/facias/any brick or stone wall surface etc. Make of -Thermax/chemco system/webac chemicals top surfaces of the plaster shall be finished even and smooth with using extra cement complete all as specifed. Note:- Item shall be carried out by authorised applicator of manufactuer.

M &L for curing of the surface using Maxcure CC 75 curing efficiency; Make of -Thermax/chemco system/webac chemicals. Maxcure CC 75 complies with the internationally recognized ASTM C309-90 standards incuding all tools and tackles complete all as specified. Note:- Item shall be carried out by authorised applicator of manufactuer.

All as per item No 06 but except bricks.

Demolition of RCC in ground floors and pavings not exc 15cm thickness ( below or above ground level ) Complete all as specified.

Providing precast cement concrete 1:2:4 type B1(using 20mm graded stone aggregte)landings, cover slabs chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain with plain fair faces, including chamfers weatherings throating etc. and set in CM1: 4 complee all as specified.

S&F Mild steel bars TMT 10 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for coh, .nns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in flooring 40mm thick finished even and smooth with using extra cement Complete all as specified .

M&L 100 mm thick PCC 1:4:8 type D-2 using 40mm graded aggregate sub basefilling and mass concreate complete all as specified.

M&L for 80mm thick( M-40) factory made chamfered edge Cement Concrete paver blocks and including 25mm thick compacted bed of sand complete all as specified.

M&L for factory made kerb stone of plain cement concrete (1:2:4) type B-1(using 20 mm graded stone aggregate) , of size depth 450mm , thickness 150 mm and length n.exc. 500 mm set and jointed in cement mortar (1:4) incl painting work complete all as specified .

M&L for Granite (of any type) tiles/slab in skirting/ dados 20 mm thick over baking coat 15 mm thick in cement mortar 1:4, laid and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including rubbing and polishing Complete all as specified and directed.

M/s Ranaji Construction Co (BID ID -3331756)

K P BUILDERS (BID ID -3331809)

Tulsi Enterprises (BID ID -3332322)