SPECIAL REPAIR TO BUILDING NO T 07 AND ADJACENT ROOM AT CQA A KIRKEE.

Amount

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

Plain, galvanised, mild steel sheeting 1mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.

Aluminium powder coated framed work for false ceiling with angle 40mmx 40mm x16 gauge at wall side and intermediate rectangular tube 38mm x 24mm x 20 gauge including necessary suporting hangers comprising og MS rods/ aluminium strips or angles / GI wires for securing frame work to ceiling etc and 3mm thick aluminium composite panel (ACP) of approved quality and colour of size 600mm x 600mm and joint to be filled by sealant complete all as specified and as directed.

Preparation of new plastered surface of wall and applying 3mm thick wall care putty, to make wall surface smooth and even and applying two coats of plastic emulsion paint of desired colour and pattern over a coat of primer on wall/ceiling using roller/brush complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Preparation of new plasterd surfaces of wall and applying two coats of water proofing exterior acrylic emulsion paint over coats of primer/Base coat as per manufacturers instruction complete all as speicifed and as directed by Engineer-in-Charge.(Make:- Apex Ultima Protek Asian paints, Nerolac exel top guard, berger weateher coat long life 10 yrs) Note:-(i) filling of cracks, holes and dents if any on the plastered surfaces are includes in the same rates.(iii) Paint shall be carried out through authorised applicator only and certificate of authorised applicator shall be submitted by contractor before commencement of work.

Double charged light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade and including screed or bedding of layer 15mm thick in CM 1:6 for laying of floor finish complete all as specified and as directed.

Machine cut kota stone slab flooring 20-25mm thick over and including 15mm thick cement screed base in CM (1:6) with roughening of surface, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

20-25mm thick Machine cut kota stone on verticle surface as riser of steps, skirting, dado over and including 10mm thick cement plaster CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete including taking old existing collapsible steel gate complete all as specified and as directed.

1.00mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: , but gear operated type with bevel gear box and crank handle including taking down complete all as specified and as directed.

Demolition Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of rubbish from site complete all as specified and as directed

75mm thick PCC type C-2, 1:3:6 (using 40mm graded stone aggregate) as in paving, footpath etc and finished the surface even and smooth without using extra cement complete all as specified and as directed.

110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

110mm PVC (SWR) bends any radius complete all as specified and as directed.

Precast cement concrete block masonry of grade C-5 having density not less than 1800 kg/cum and 28 days average minimum compressive strngth of block should be 5 N/sqmm as in walling set in cement mortar 1:6 complete all as specified and as directed.

10 mm thick cement plaster in cement mortar (1:6) on brick or concrete surface mixed with water proofing compound as per manufactures instructions, finishing the surface even and smooth without using extra cement including taking down of existing plaster complete all as specified and as directed.

Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces including finishing the surface fair and even using water proofing compound including taking down of existing plaster complete all as specified and as directed. (Note: Water proofing compound paid and measured separately)

Supply only Liquid water proofing compound complete all as specified and as directed.

Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing tiles. Including dismantlingof old granite of any size and type complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, partitions, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Powder coated aluminium door shutters single or double leaf door in two panels with standard aluminium section weighing 0.55kg per meter including rough cost wired figured glass 5mm thick fitted including necessary joining fillets, glazing clips rubbers neoprene packing handles to snap beeding screw etc in partition of partly glazed (5mm thick rough cast wired figured glass) and partly prelaminated board 15mm thick (both side) including arrangments and hinges complete all as specified and as directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x 17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc complete all as specified and as directed.

Frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

Stainless steeel railing of height of 1.1m with top rail pipe 50mm bore (16 gauge), verticle pipe 30mm bore 16 gauge at the 1.0 m c/c and to longitudinal paralel pipe of size 20mm bore (16 gauge ) incl T cross bend base coupling fixed with necessary fasteners for anchoring in floor and walls etc including dismantling of existing railing complete all as specified and as directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sqm of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulatos, sockets etc to be measured separately), and making good disturbed surfaces of walls, floors etc to match with existing surfaces complete all as specified and as directed.

Taking down MCB with sheet metal enclosure, main switch, DB etc and making good disturbed surfaces to match with existing surfaces complete all as specified and as directed.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces.

Point wiring with 1.5 sqmm (FRLSH) PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through and including casing and caping on ceiling/wall, with and including continuous 1.5 sqmm PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including PVC rectangular terminal boxes of suitable size and suitable for mounting modular switches, sockets etc complete all as specified and as directed. (Note - quoted rate shall include chase cutting, making good to the disturbed surfaces including plastering and painting to match with the existing colour.) a) One Light point controlled by one, one way switch.

b) One ceiling/exhaust fan point controlled by one switch and regulator complete all as specified and as directed.

d) One 3 pin switch socket outlet, 5 Amp on the same board with other switches complete all as specified and as directed.

e) One 3 pin 5 amps switch socket outlet point on independent board complete all as specified and as directed.

All as per item Sl. No.34 here in before but wiring with 2.5 sq.mm multistranded cable and earth wire with copper conductor of size 2.5 sq.mm for 15 amps power point complete all as specified and as directed.

Piano flush type switch 1 way 6 A, complete all as specified and as directed.

Supply and fix swich socket combination 5A complete all as specified and directed.

Swich socket combination 3 pin 16A complete all as specified and directed.

Step regulator for fan, 120W-2 module 230 Volts,50Hz, ISI marked all as specified and as directed.

Ceiling rose, three terminals,230 Volt (ISI marked) surface bakelite suitable for batten fitting complete all as specified and as directed.

Existing/new ceiling rose and testing batten with precoated CRCA body LED tube light fitting suitable for and including 1x20 W 4 feet long tube with polycarbonate diffuser ,LED lamp efficay -110 Lum/W ,THD ≤15% with operating voltage range 100-300V, driver efficency >85%, surge voltage withstand 2.5 KV , power factor ≥0.9 including connecting with copper conductor cable including all accessories for fixing on steel trusses / false ceiling including dismantling of old fittings complete all as specified and as directed. Make crompton are equivalent in Bajaj /philips

Existing/new ceiling rose and testing 36 W aesthetically designed 2x2 LED recess mounting in grid/armstrong type ceiling including suitable LED driver and connecting with copper conductor flexible twisted two core cable to existing/new ceiling rose and including mounting accessories complete all as specified and as directed. Make crompton are equivalent in bajaj/philips

8 way SPN DB double door 240 volts, complete all as specified and as directed.

MCB SPN 240 volt 40 amps 10 KA, complete all as specified and as directed.

MCB SPN 240 volt 6-32 amps 10 KA, complete all as specified and as directed.

MCB single pole 240 volt 5-32 amps 10 KA, complete all as specified and as directed.

Sub Main Wiring with two run single core 6 Sqmm PVC insulated unsheathed (FRLSH) cable with stranded copper conductor drawn in Casing and capping & accessories Suitable size with and including 6 Sqmm copper green colour earth wire complete all as specified and as directed. by Engineer-in-Charge. NOTE-three run of 6 sq.mm & One run of PVC Casing and caping with accessories shall be measured as One length.

Sub Main Wiring with two run single core 4 Sqmm PVC insulated unsheathed (FRLSH) cable with stranded copper conductor drawn in Casing and caping & accessories Suitable size with and including 4 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. NOTE-three run of 4 sq.mm & One run of PVC Casing and capingt with accessories shall be measured as One length.

Taking down ceiling fan/wall mounted/exhaust fan of any type from its location and kept in safe custody of MES store complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level connected with galvanised iron/steel earth wire of 4 mm dia by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I and earth wire protected by galvanized pipe light grade 15mm bore and connected to DB including necessary earthwork and excavation in any type of soil, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2:4 type B1 design mix cover slab with 6mm dia MS bars at 100mm c/c both ways with MS Hook 6mm dia MS bars etccomplete all as specified and as directed. including testing on completion.

Exhaust fan metallic body 300 mm sweep complete all as specified and directed.

Wall mounted fan acrylic blade high performance 400 mm sweep complete all as specified and directed.

Energy saving ceiling fans, 230 Volts, 26 Watts, single pole, 1200 mm sweep, high speed of approved colour with remote control and two years warranty certificate from the manufacturers, with latest BEE five star rating and BLDC technology all as per Havells Model No :- Efficiencia Neo (BLDC 26W) or techno commercially equivalent models specified in PS complete with down rod and GI hook with welding work, wire connections from ceiling rose to ceiling fans, with complete accessories including writing of MES No with unit name on ceiling fans using approved stencil with synthetic enamal paint complete all as specified and as directed.

greenstone construction

ANIL CONSTRUCTION CO.

ShreHari Civil Enginneering and Contractors

Vastushilpa Contrustion

Shri Sant Cosntruction

MAHESH DADAJI BACHHAV

M/S JAYCONSTRUCTION CO

DARSHAN ENTERPRISES