REPLACEMENT OF VINTAGE ALUMINIUM WIRING WITH NEW COPPER WIRING IN COMCEN AT ADMIN BUILDING AT INS CHILKA UNDER GE CHILKA

Amount

Taking down carefully copper/ aluminium point wiring for light, fan, socket or power point complete with fittings such as switches, fan regulators, light fittings, tube light fittings, bracket light fittings and ceilling rose, holders etc including making good the disturbed surface of walls, complete all as specified and as directed.

M & L for point wiring with PVC FRLS insulated unsheathed multi stranded copper conductor cable of size 1.5 Sqmm drawn through in including surface PVC casing and caping (ISI Marked) not less than 20mm wide with existing sunken box including 3 mm thick laminated sheets for mounting switches/sockets with all accessories as required including 1.5 Sqmm copper conductor FRLS cable for earth continuity conductor of green colour for one light point/ fan point/ bell point/ one 5/6 Amp socket outlet controlled by one 5/6 Amps one way switch complete all as specified and as directed.

All as per item No 2 above but, one socket outlet, three pin, 5/6 Amp on the same board with other switches complete all as specified and as directed.

All as per item No 2 above but for staircase light point controlled by 02 Nos two way switch complete all as specified and as directed.

All as per item No. 2 here-in-before but for 15/16Amp socket out let, independent with 4.0 Sqmm copper cable of PVC FRLS insulated, unsheathed, multi stranded and 4.0 Sqmm copper conductor cable FRLS as earth continuity conductor of green colour complete all as specified and as directed.

Taking down carefully sub main wiring including batten/ conduit by unscrewing from wall,ceiling and making good surfaces to match with existing complete all as specified and as directed.

M&L sub main wiring with 4 runs of 10 Sqmm PVC FRLS insulated unsheathed copper cable multistand 1100 Volt and two runs of copper earth wire 6 Sqmm PVC FRLS drawn in and including surface PVC casing caping PVC not less than 32 mm wide including making good to existing surface complete all as specified and as directed. Note:- 4 runs of 10 Sqmm copper cable, 2 run of 6 Sqmm copper earth wire and one run of PVC casing caping shall be measured as one unit length.

M&L sub main wiring with two runs of 10 sqmm PVC FRLS insulated unsheathed copper cable multistand 1100 Volt and one run of copper earth wire 6.0 sqmm PVC FRLS drawn in and including surface casing and caping not less than 25mm wide including making good to existing surface complete all as specified and as directed. Note:- 2 runs of 10 sqmm copper cable, one run of 6.0 sqmm copper earth wire and one run of casing andcaping shall be measured as one unit length.

M&L sub main wiring with two runs of 6 sqmm PVC FRLS insulated unsheathed copper cable multistand 1100 Volt and one run of copper earth wire 6 sqmm PVC FRLS drawn in and including surface casing and caping not less than 25mm wide including making good to existing surface complete all as specified and as directed. Note:- 2 runs of 6 sqmm copper cable, one run of 6 sqmm copper earth wire and one run of casing and caping shall be measured as one unit length.

M&L sub main wiring with two runs of 4 sqmm PVC FRLS insulated unsheathed copper cable multistand 1100 Volt and one run of copper earth wire 4 sqmm PVC FRLS drawn in and including surface casing and caping not less than 25mm wide including making good to existing surface complete all as specified and as directed. Note:- 2 runs of 4 sqmm copper cable, one run of 4 sqmm copper earth wire and one run of casing and caping shall be measured as one unit length.

S&F switch piano, flush type, single pole, one way, 5/6 Amp, complete all as specified and as directed.

S&F switch piano, flush type, single pole, two way, 5/6 Amp, complete all as specified and as directed.

S&F switch socket combination 3 pin 5 Amp, 230 volt complete all as specified and as directed.

S&F switch socket combination 2 in 1, 3 pin 5/15 Amp, 230 volt, multipurpose, complete all as specified and as directed.

S&F ceiling rose, surface bakelite 65 x 30mm, three terminals including PVC box of size 3"x3" round type complete all as specified and as directed.

S&F five stepped socket type electronic fan regulator for ceiling fan of any sweep including necessary connection complete all as specified and as directed.

S&F10 Watt LED Bulk Head fitting Enviromenatal friendly, ultra morden, energy saving, surface mounted, decorative oval bulk head edge- lit LED luminaries comprising of high brightness LEDs complete all as specified and as directed. Make:- Bajaj Cat No BIBWP10WLED (Product code 112334) or Havells Cat Part No. HEXAFT10WLED857SSYMBOPC or Philips Cat Part No. WT202WLED6SCWPSUSIPC as approved.

S&F 1X18 Watt indoor type retrofit batten type luminaries complete with LED retrofit T8 polycarbonate tube of capacity 18 Watt with decorative holder including connection with three core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and as directed. Make:- Havells Cat Part No. REGALBATTENT8UPTO1X22WDSBSWH (Batten) and PHOTONULTRA18W LED865G13(LHLDCLXNUL8X018)(LED Lamp)or Wipro Cat Part No. W10921208 (Batten / Channel ) & LL13-181-65SE(LED Lamp) or Bajaj Cat part No for Batten : BLRB-DB118 &Tube : BLRB 18W CW or Philips Cat Part No.BN550WLED20-3000 as approved.

S&F 9 W tubelight fitting with LED lamp of capacity 9 Watt , Endura linear LED Wall mounted LED batten with polycarbonate housing & intergated driver for efficient heat dissipation with including connection with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make:- Havells Cat part No: LUMILINEBS 9 W LED865SPCWH or Bajaj Cat part No: BCLSB 10 WH or equivalent in Philips

S&F of LED street light 25W, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compartment with IP 66 protection and impact resistance of IK07 including necessary connection complete all as specified and as directed . Make :- Bajaj Cat Part No. ENXTP30LWHCRPCSD 25 W or Havells Cat Part No : VILUMINASL25WLED757SASYB OPC as approved.

S&F 1x28/30 watt indoor type 2x2 recess mounted LED luminaries with high brightness including necessary connection with twin core twisted flexible copper conductor cable of suitable size upto ceiling rose and ncessary checking of the earthing neutral and phase at fixture complete all as specified and as directed . Make :- Bajaj Cat Part No.BZRSQL 30WGZi WH or Havells Cat Part No : PLUTONEO2X2PLR28WLED857S as approved.

S&F of LED street light 45W, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compartment with IP 66 protection and impact resistance of IK07 including necessary connection complete all as specified and as directed . Make :- Bajaj Cat Part No.BRTFG 45W LED or Havells Cat Part No : ENDURAPEARLNEOL45WLED757SASYTOPC as approved.

S&F Ceiling fan 1200 mm sweep , white/ivory in colour , AC single phase,230 V with down rod including necessary connection with multistanded copper conductor flexible copper wire of suitable size from ceiling rose to connector of fan complete all as specified and as directed . Make :- Bajaj /Havells/Crompton Greaves /Khaitan as approved.

S&F Exhaust fan 300 mm sweep, 1400 rpm,heavy duty, AC single phase,230 V including necessary connection with multistanded copper conductor flexible copper wire of suitable size from ceiling rose to connector of fan and necessary fixing arrangement ie anchor bolts,nuts, washers and making good to the disturbed surfaces to match with the existing complete all as specified and as directed . Make :- Bajaj /Havells/Crompton Greaves /Khaitan/Usha as approved.

Taking down defective ceiling fan from its position and refixing the same after necessary minor repair to make its functional complete all as specified and as directed.

M&L for spray painting with white synthetic enamel paint including preparation of old surface of the ceiling fan of any make/model/sweep, filling cavities with filler after cleaning dust in situ or in other position complete all as specified and as directed. Make :- Berger paint(Luxol)/Asian paint (Apcolite) / Jenson & Nicholson paint Ltd (Brolac)

M&L for rewinding of ceiling fan motor of 1200 mm sweep of any make with super enameled copper wire of existing gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts and washers, split pins etc complete all as specified and as directed

S&F in repair capacitor/ condenser of ceiling fan 2.5 mfd of approved make complete all as specified and as directed. Make :- Nicco/Havells/Universal

S&F in replacement of ball bearing 6201 / 6202 / 6203 including metal filling, machining if required complete all as specified and as directed. Make :- SKF/NBC as approved

S&F in replacement of clamp with nuts , bolts and rubber bush suitable for ceiling fan of any sweep and make as per existing size and shape complete all as specified and as directed

Taking down carefully existing unserviceable MCB DBs with MCBs any type by unscrewing from wall,ceiling and making good surfaces to match with the existing complete all as specified and as directed.

S&F factory made sheet metal enclosure for DBs double door fixed flush to the wall, SPN, 240 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd /Standard/Havells

S&F factory made sheet metal enclosure for DBs double door fixed flush to the wall, SPN, 240 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd /Standard/Havells

S&F sheet metal enclosure single pole and neutral with two pin and earth plug and socket complete with on single pole MCB 20 Amp complete complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F MCB 6 to 32 Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F 40 Amp, RCCB,Double pole,30mA, complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F Factory made sheet metal enclosure for DBs double door (fixed flush to the wall), TPN, 415 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 6.0 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F MCB four pole 63 Amps 415 volt 50 Hz ciomplete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

M&L Chemical earthing complete with copper earth bonded rod electrode 50 mm dia wall thickness 16 gauge and 2 m length, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate including copper strip of size 25mmx3mm along with 60 Kg bag of back fill compound (highly conductive, non corrosive moisture retaining chemical) complete including necessary excavation and earth work with top 300 mm deep having one brick thick masonry chamber of suitable size as per standard Engineering Practice with cast iron cover. The voltage between Neutral and earth not to exceed 2 Volts and IR value less than 1 ohm. The earth resistance shall be as per IS 3043 complete all as specified and testing on completion. Note:- Copper strip beyond 7.5 m length shall be measured and paid seperately.

M&L copper strip of size 25mmx3mm with necessary fixing arrangement complete all as specified and testing on completion.

PABITRA MOHAN PARIDA

BHARAT KUMAR BALL

ANTARYAMI PANDA AND COMPANY

PRADIPTA KUMAR PANI