Special repair /renovation of Canal Rest House, B.M.L.colony Patiala

Amount

Dismantling cement conglomerate floors (25mm to 50mm) thick including concrete base.

Dismantling glazed tiles (to be carefully removed).

Dismantling plank ceiling and supporting timber.

Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing unserviceable tiles, or bricks with new over and disposal of unserviceable material to the dumping ground within 50 m lead (The cost of new tiles or bricks excluded).

Scraping of White wash and colour wash & snowcwm

Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two coats to give an even shade.

Providing and laying vitrified floor tiles 600x600mm size premium quality, manufactured using Soluble Salt Technology, with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 fine sand ) for new flooring laid with cement based high polymer modified quick set tile adhesive (water based) of approved make IS 15477 marked using 5 Kg adhesive per sqm of tile area in average 3mm thickness over existing base etc., complete

Providing & fixing Ist quality cermaic glazed wall tiles confirming to IS:15622 ( thickness to be specified by the manufacture of approved make in all colours, shades except burrgundy, bottle green, blackottle green, black of size 300x600 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:4 ( 1 cement:4 coarse sand ) and joining with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed withpigment of matching shade complete.

Anti-skid floor tiles 10mm thick in flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with white cement slurry in joints including corners angles and beading.

Preparation of plastered or concrete surfaces for painting (including sand papering the surface using ready mixed cement based wall putty by applying two coats to get required finish.

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats)

Providing and fixing of false celling at all heights of 600x600x0.5mm metel ceiling perforated tiles with fleece powder coated of 60 to 70 microne type OREO GI laid in grid system The frame work cpmprise of made of GI 120 GSM coating with minimum 0.3mm thickness main runner spaced at 1200mm centres securely fixed to be structrual soffit by approved hangers at 1200mm maximum centres. Hangers(GI) wire of 4mm dia) to be fixed by approved roof plug, level adjusters and screw etc. The last hanger at the end of each main runner should not be greater than 450mm from the adjscent wall. Flush fitting 1200mm long cross tees(with double stiching) to be interlocked between main runners at 600mm centre to form 1200x600mm modules. Cut across tees longer than 600 mm to be supported independantly. 600x600 mm modules to be formed by fitting 600 mm long flush fitting cross tees centerally between the 1200 mm cross tees. Perimeter trim to be wall angle secured to walls at 450 mm maximum centres. Wall height of cross toe 24 mmx26mmx32mm and Main Runner 24mmx38mmx32mm complete in all respects as per specifications.

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. Glass panes 4mm thick above 0.40 sqm area.

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.

Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS:13592 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item)

Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Centring and Shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete

Black Granite stone tiles 15 mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps

Providing and fixing in position stainless steel sinks of approved make ( to the approval of Engineer-in-charge) 1mm thick , grade-304(18/8) with waste coupling complete in all respectsfitting.size 600x450x225mm ( Net size excluding flat edge)

Providing & placing in position on terrace ( at all floor levels) HDPE water storage tanks of approved make ( to the approval of Engineer-in-Charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Triple layer tanks.

Providing and fixing in position automatic brass ball cocks in tanks. Plastic ball cock with rod and plastic ball 25 mm i/d.

Providing, laying, jointing, fixing and testing ISI marked G.I.pipe(as per IS 1239) B-CLASS pemium make such as(Jindal Hisar)including cost of specials (such as tees, bends, sockets, elbows etc. ) painting with anti corrosive bitumastic paint, testing, cutting, threading inside building complete. 20 mm i/d.

Providing and fixing in position H.C.I. soil waste vent or antisyphonage pipes to I.S.I. specification (IS:1729) of approved make ( to the approval of Engineer-in-charge) including cutting, jointing, wastage, but excluding cost of lead jointing. 100 mm i/d hci pipe line laid complete.

Providing and fixing in position Centrifugally cast iron special for soil waste vent or anti syphonage pipes to I.S.I specifications (IS:3989) of approved make ( to the approval of Engineer-in-charge) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 100 mm i/d pipes. Heal rest bend.

Providing and fixing in position Centrifugally cast iron special for soil waste vent or anti syphonage pipes to I.S.I specifications (IS:3989) of approved make ( to the approval of Engineer-in-charge) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 100 mm i/d pipes. Collars.

Providing lead caulked joints to H.C.I. pipes and specials conforming to I.S.I. Specification (IS:1729) of approved make ( to the approval of Engineer-in-charge) including cost of lead yarn, fuel and tools etc. 100 mm dia i/d(1.36kg).

Providing lead caulked joints to H.C.I. pipes and specials conforming to I.S.I. Specification (IS:1729) of approved make ( to the approval of Engineer-in-charge) including cost of lead yarn, fuel and tools etc. 75mm i/d (1.13 kg.)

Providing and fixing in position H.C.I. soil waste vent or antisyphonage pipes to I.S.I. specification (IS:1729) of approved make ( to the approval of Engineer-in-charge) including cutting, jointing, wastage, but excluding cost of lead jointing. 75mm i/d H.C.I. pipe line laid complete.

Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications (IS:1729) of approved make ( to the approval of Engineer-in-charge) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 75mm i/d pipes Heal rest bend.

Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications (IS:1729) of approved make ( to the approval of Engineer-in-charge) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 75mm i/d pipes Collars.

Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification (IS:1729) of approved make ( to the approval of Engineer-in-charge) of the self cleaning design with C.P. brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. minimum depth of water should be 150mm with a minimum seal 50mm. With 75mm i/d outlet deep seal.

Providing and fixing in position Chinaware European type water closet Suit syphonic type with P trap or S trap (to the approval of the Engineer-in-charge) suite-consisting of 10 ltr. PVC flushing cistern including cost of solid white cover complete in all respect and to the entire satisfaction of engineer in charge. China ware extended wall mounted H.W.C. with matching chinaware cistern and seat cover cokplete in all respects.

Providing and fixing in position vitreous chinaware white lavatory suites of approved make ( to the approval of Engineer-in-charge)consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap complete in all respect. Size 630 mm x 450 mm.

Providing and fixing vitreous chinaware standard pedestal of approved make ( to the approval of Engineer-in-charge)for wash basin complete in all respect. Vitreous chinaware standard white pedestal for wash basin.

Extra for providing and fixing PVC 32mm complete in all respect.

Providing & fixing in position best Indian make PVC flexible tube connection of approved make ( to the approval of Engineer-in-charge) complete in all respect. PVC tube connection of size 15 mm x 375 mm withPTMT nut.

Providing & Fixing in postion 15 mm i/d bib cock of approved make ( to the approval of Engineer-in-charge) complete in all respect. C.P. brass Bib cock long nose/long body without glange.

Providing and fixing jet spray with 2'-6" long PVC pipe. With C.P. Brass nut.

Providing & Fixing in postion stop cock / Angle valve of approved make ( to the approval of Engineer-in-charge)complete in all respect. C.P.brass 15mm Concealed stop cock with flange.

Providing and fixing in position towel rails / ring of approved make ( to the approval of Engineer-in-charge)fixed in with rawl plugs embedded in walls with brass screws, complete in all respects . C.P. brass towel Rails size 15 mm dia 600mm long.

Providing and fixing in position CP brass soap dish of approved make ( to the approval of Engineer-in-charge)fixed into wall with rawl plugs and C.P brass screws and complete in all respects.

Providing and fixing in position paper holder of approved make ( to the approval of Engineer-in-charge) fixed in to wall with C.P brass screws complete in all respect. CP brass toilet paper holder.

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass ( of approved make) complete with 4mm thick hardboard backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S studs on top complete in all respect (as required by the Engineer-in- Charge). Size 600mmx450mm.

Providing & Fixing in position C.P. Brass flange of approved make ( to the approval of Engineer-in-charge) under various fixtures complete in all respects.

Providing & Fixing in position C.P. Brass extension piece 25mm long to 50mm long of approved make ( to the approval of Engineer-in-charge) with various fixtures complete in all respects.

Providing and fixing in position CP brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make ( to the approval of Engineer-in-charge)complete in all respect.

Providing and fixing in position S.S.grating with frame of approved make ( to the approval of Engineer-in-charge)complete in all respect ( Previously item No. 30.104)

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.

12.5 mm thick cement plaster 1:4

Precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 with neat cement slurry between joints and over the base for floors, treads of steps and landings.

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked), 1100volts grade to be laid in heavy gauge, uPVC, fire retardant conduit pipe 20mm/25mm dia. (2mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules, for having electronic fan regulators, bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20Amp. Sockets and 6Amp. /16/20 Amp. Switches (Screw Type Modular Accessories) etc., and covered with Frame Plate etc., & including the cost of required number of modular switches /sockets, step type electronic fan regulator 100watts, PVC connector (For Fan Box and Electronic Buzzer), Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) UPVC conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:- Wiring fan point with sheet metal fan box (shape hexagonal & sheet thickness not less than 1.60 mm) in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts.

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked), 1100volts grade to be laid in heavy gauge, uPVC, fire retardant conduit pipe 20mm/25mm dia. (2mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules, for having electronic fan regulators, bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20Amp. Sockets and 6Amp. /16/20 Amp. Switches (Screw Type Modular Accessories) etc., and covered with Frame Plate etc., & including the cost of required number of modular switches /sockets, step type electronic fan regulator 100watts, PVC connector (For Fan Box and Electronic Buzzer), Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) UPVC conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:- Wiring light point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade.

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked), 1100volts grade to be laid in heavy gauge, uPVC, fire retardant conduit pipe 20mm/25mm dia. (2mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules, for having electronic fan regulators, bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20Amp. Sockets and 6Amp. /16/20 Amp. Switches (Screw Type Modular Accessories) etc., and covered with Frame Plate etc., & including the cost of required number of modular switches /sockets, step type electronic fan regulator 100watts, PVC connector (For Fan Box and Electronic Buzzer), Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) UPVC conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:- Wiring call-bell point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm,1100volts grade with bell push and electronic buzzer 230 volts AC (including the cost of bell push, electronic buzzer & powder coated concealed metal box for electronic buzzer).

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked), 1100volts grade to be laid in heavy gauge, uPVC, fire retardant conduit pipe 20mm/25mm dia. (2mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules, for having electronic fan regulators, bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20Amp. Sockets and 6Amp. /16/20 Amp. Switches (Screw Type Modular Accessories) etc., and covered with Frame Plate etc., & including the cost of required number of modular switches /sockets, step type electronic fan regulator 100watts, PVC connector (For Fan Box and Electronic Buzzer), Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) UPVC conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:- Wiring 3 pin 6 Amp. wall socket (Shuttered) point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade complete with bonding to existing earth with PVC insulated copper conductor single core FR cable (ISI marked) overall 1 sq. mm, 1100volts grade.

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked), 1100volts grade to be laid in heavy gauge, uPVC, fire retardant conduit pipe 20mm/25mm dia. (2mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules, for having electronic fan regulators, bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20Amp. Sockets and 6Amp. /16/20 Amp. Switches (Screw Type Modular Accessories) etc., and covered with Frame Plate etc., & including the cost of required number of modular switches /sockets, step type electronic fan regulator 100watts, PVC connector (For Fan Box and Electronic Buzzer), Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) UPVC conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:- Wiring 3 Pin 6 Amp. Plug control comprising wall socket (shuttered) and switch including bonding to existing earth with PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1 sq. mm, 1100volts grade complete.

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked), 1100volts grade to be laid in heavy gauge, uPVC, fire retardant conduit pipe 20mm/25mm dia. (2mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules, for having electronic fan regulators, bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20Amp. Sockets and 6Amp. /16/20 Amp. Switches (Screw Type Modular Accessories) etc., and covered with Frame Plate etc., & including the cost of required number of modular switches /sockets, step type electronic fan regulator 100watts, PVC connector (For Fan Box and Electronic Buzzer), Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) UPVC conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:- Wiring 3 pin 16/20 amp. power plug control (shuttered) and switch.

PVC INSULATED SINGLE CORE FR COPPER CONDUTOR CABLE Supply and Errection of PVC insulated single core FR copper condutor cable ISI marked left bare in Pipe casing of suitable size excluding the cost of supply and erection of pipe or casing PVC insulated copper conductor single core FR cable (ISI ) marked overall 1 sq.mm , 1100 volts grade.

PVC INSULATED SINGLE CORE FR COPPER CONDUTOR CABLE Supply and Errection of PVC insulated single core FR copper condutor cable ISI marked left bare in Pipe casing of suitable size excluding the cost of supply and erection of pipe or casing PVC insulated copper conductor single core FR cable (ISI ) marked overall 1.5 sq.mm , 1100 volts grade.

PVC INSULATED SINGLE CORE FR COPPER CONDUTOR CABLE Supply and Errection of PVC insulated single core FR copper condutor cable ISI marked left bare in Pipe casing of suitable size excluding the cost of supply and erection of pipe or casing PVC insulated copper conductor single core FR cable (ISI ) marked overall 4 sq.mm , 1100 volts grade.

PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC pipes & HDPE pipes (fire retardant) for wiring purposes including bends, inspection boxes etc., where necessary including other petty material as per PWD General Specifications 2010:- Heavy gauge PVC conduit pipe 20mm dia. (ISI marked 2mm thick) Flushed.

PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC pipes & HDPE pipes (fire retardant) for wiring purposes including bends, inspection boxes etc., where necessary including other petty material as per PWD General Specifications 2010:- Heavy gauge PVC conduit pipe 25mm dia. (ISI marked 2mm thick) Flushed.

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's: Supply and erection of sheet metal double door distribution boards of suitable size and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles and bonding to existing earth etc. GROUP-A: (Siemens (Beta Guard/Minigard), Legrand (Ekinoxe) & Schneider (Neo Break), L&T (Hager vision+) Sheet metal double door T.P. & N. (vertical design)distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating FP/ TPN MCB's/ isolators for incoming and DP/ SP & N/ Single Pole MCB's/ RCBO/ RCCB's for outgoing 8 way each.

MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's: Supply and erection of Miniature Circuit Breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles/lugs. GROUP-A: (Siemens (Beta Guard/Minigard), Legrand (Ekinoxe) & Schneider (Neo Break), L&T, Hager Miniature circuit breaker single pole 6 to 32amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415volts 50cycles AC supply.

MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's: Supply and erection of Miniature Circuit Breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles/lugs. GROUP-A: (Siemens (Beta Guard/Minigard), Legrand (Ekinoxe) & Schneider (Neo Break), L&T, Hager Miniature circuit breaker four pole 50, 63amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply.

Prividing and fixing in position storage type automatic electric water heater pressure / non pressure type thermostatically controlled, single phase, verticle wall mounted of approved make ( to the approval of Engineer-in-charge) with thermoststs, inner container of stainless steel complete with 1 mtr. three core flexible cord with plug, non return valve and pressure release valve complete in all respects 25 litre capacity water heater.

SATISH KUMAR CONTRACTOR