PROVISION OF ANTI BIRD STEEL NET AND SPIKES TO PROTECT FROM PEGION ENTRANCE FROM VARIOUS LOCATIONS AT SHED NO T-79 AT COAST GUARD STORE DEPOT (MBI), MANKHURD

Amount

Note - (i) Work to be carried out on GL to 5th floor (Including terrace of building) from ground levels (ii) Rate for scaffolding and safety system for labour are included in quoted rates by contracter. (iii) Safety Net and Water proofing covering materials shall be arrange by contracter while working at site and it will be deem fit in quoted rates by contracter.

M & L for expanded metal, wt exc 4.00 kg/sqm cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed.

M & L framed work such as grills, grating etc. with ends of bars shoulded and /or riveted or forget into spikes framed gurd bars barred iron doors, ladders framed balusters, walk way, railings frame work of water tanks and similar work and for portions framed and hung as gates inclubing pintle hinges, stops, hand-made sliding bolts, etc conforming to Fe 290 Gde-165, moulded in any shape and size complete all as specified and directed.

S & F M.S Plates Fe 410W Gde E-250 quality A (Plain or chequered) channels, squre cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

M&L for preparation of new steel surfaces of any descriptrion over 10 cm width or girth and applying two coat of synthetic enamel painting over one coat of red oxide zinc chrome primer to steel surface complete all as specified and directed.

M&L for preparation of old painted Steel surfaces of any descriptrion over 10 cm width or girth and applying one coat of synthetic enamel painting to steel surface as specified and as directed.

M & L for running welding 6mm but n.exc 9 mm in repair to existing members complete all as specified and directed.

Providing and fixing punched tape concertina coil 450mm dia made with high tensile strength galvanized mild steel wire 2.60mm dia as per IS 4454 strip material (galvanized MS strip as per IS-1730) upto 3 metre height of wall with angle iron 'Y' shaped placed 3.00 apart and with 9 horizontal R.B.T stud tied with G.I staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron with reinforced barbed tape (RBT)/ spring core (2.6mm dia) wire minimum barb 9mm width,loop spacing 250 ± 20mm,coil length 9m and fixing and laid in position etc of make as approved by GE confirming to the specification and fixing with Y shape angle iron with 6 Nos horizontal R.B.T (Reinforced Barbed Tape) wire,stud tied with GI staple or GI clips to retain horizontal (not allow sagging) complete all as specified and directed. . Note:-M.S frame required to protect coil will be measured and paid under Serial item No 3 here-in-before.

BA Enterprises (BID ID -3162175)

SHRI SIDHI VINAYAK ENTERPRISES (BID ID -3154637)

M/s Himanshu Tyagi (BID ID -3167056)