Annual electrical M & R to electrical crematorium including replacement of furnace coils, refractory materials and periodic cleaning of scrubbers using necessary spare parts, tools and skilled man power etc,complete at ward no 48 Panathur of Mahadevapura Zone 01

Annual electrical M & R to electrical crematorium including replacement of furnace coils, refractory materials and periodic cleaning of scrubbers using necessary spare parts, tools and skilled man power etc,complete at ward no 48 Panathur of Mahadevapura Zone 01

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300mm etc. as required. 25MM

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC ...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC ...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC ...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. Two module

Supplying and fixing HRC fuse units base on existing switch / panel board. 32 to 63A

Supplying and fixing HRC fuse units base on existing switch / panel board. 100 to 300A

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit break...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit break...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double b...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Supplying of 1 x4 feet - PVC Batten with integrated LED tube 20/22 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 2...

Supplying of ABC Powder Type Fire Extinguisher. 9 Litre

Supplying of ABC Powder Type Fire Extinguisher. 6 Litre

Safety helmet with rachet

Rubber hand gloves : 15 kV tested

Rechargeable 5 W LED Hand Torch

Supplying of Submersible Three phase (6 inch/150mm). 7.5HP/5.5kW DOL. KPWD Civil SR 2018-19

Supplying and drawing UTP-CAT 6E LAN cable.

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 95 Sqmm...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 70 Sqmm...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 10 Sqmm...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. LT Cable. 2.5 to 25 Sqmm

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. LT Cable. 35 to 95 Sqmm

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR 2019-20 KSRB I-2, P-7) In soil (ordinary)

KSRB 7.5 : Providing and fixing pull and push type rolling shutters of approved make out of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with in...

Supplying heavy gauge PVC conduit pipe 40 dia 2.5 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted ...

Crawler mounted crane 35 T capacity. Vol-1 Common SR 2023-24

Supply and fixing of 3-pole Capacitor switching contactor with NO/NCcontacts and inbuilt damping resistor to protect the contactor and capacitor from highest in rush current , fixed on existing wood/...

Supplying of on load change over switches 4 poles,AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 250 A

Fabricating supplying and mounting MS box made out 16 SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front ...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron and M.S. flat 40x40x6mm with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved pain...

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws.

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

Supplying, installation, testing & commissioning of 12V ..AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type. 150 AH capacity

Housekeeping workusing the following Cleaning materials. Soap oil / phenol. Common SR 2018-19

Bleaching powder. Common SR 2018-19

Bombay broom stic. Common SR 2018-19

Nitric Acid. Common SR 2018-19

coconut broom stic

Plastic bucket 20 ltr capacity

Supplying, fixing andwiring 1000/5A to 1600/5A15VABurden

class 1 Current Transformer

Supply of Air Freshner cakes

Supply of Room Refreshner

Supply of Urinal cakes

Supplying & fixing of Coil Holding Refractory Bricks suitable for vertical coil insertion system electrical crematorium furnace conforms to IS-2042. The bulk density of the brick will be max of 2.20gm...

Supplying & fixing of Insulation Refractory STANDARD bricks suitable for crematorium furnace having the bulk density of max of 0.60gm/cm2 and maximum working temperature of 13000c. the size of brick 7...

Supplying & fixing Body Laying With 70% aluminiumMoulded RefractoryBricks (MCL) suitable for electrical crematorium furnace having the required mechanical strength and chemical composition as per IS-2...

Supplying of refractory cement fine ACC-50 (25 kg/bag) for casting refractory bricks

Supplying of refractory cement FIRECRETE super (25 kg/bag) for casting refractory bricks

Supplying & fixing of Refractory cement white heat K ACC make for casting refractory bricks. 25 kgs bag

Supplying of Acoustic Set Thermotex Liquid Blinder suitable for casting refractory bricks. 40 kgs bucket

Supplying & fixing of FIBER blank kit 64 grade suitable for electrical crematorium furnace heat insulation- 7300 x 610 x 25mm

Supplying & fixing of FIBER blank kit 96 grade suitable for electrical crematorium furnace heat insulation- 7300 x 610 x 25mm

Supplying & fixing of FIBER blank kit 128 grade suitable for electrical crematorium furnace heat insulation- 7300 x 610 x 25mm

Supplying & fixing of FIRE clay cement (40 kg/bag) for casting refractory bricks.

Supplying & fixing of Refractory Slabs IS-8 high aluminium suitable for electrical crematorium furnace having the required mechanical strength and chemical composition as per IS 2042 and IS-1528, mx w...

Supply and fixing of VERTICAL heating element suitable to operate on 220 volts 50Hz (4.5 KW capacity of heating element) element shall be made out of 8 SWG 25mm dia 6 mm pitch total length 3100 mm su...

Providing servicing, repairing and overhauling of existing body charging trolley complete.

Servicing & cleaning of Scrubber, Tank,Scrubber duct,Exhaust Blower, Exhaust Duct Furnace to Chimny and cleaning of chimny (6 months once)

Furnace main door servicing include of bearing replacement 2 no’s and door lifting chain replacement

Supply & erection of SS310 pipe Thermocouple 19 mm OD & 700mm length, simplex

Supply & erection of 2 wire Temperature controller range 0 to 1200.c of size 99 x 99 MM,

Supply & erection of 311H sleeve (adopter)

Supply & erection of B-58 belt

Supply and fixing of VERTICAL furnace coil holding bricks (240 X 300 X 80mm) made out of refractory material to with stand a temperature of 1000 C using required refractory cement and other binding m...

Providing Door lifting mechanism set for manually operating made out by 2 bearings 30mm dia and 50mm dia bore shaft and 40*40*100mm shifting block with handle and mounting bracket

Supply and erection of 1/2HP 3phase 50 Hz, 1440 RPM flange mounting motor with gear output 10RPM with grounding frame, complete including loading, unloading and transportation to work site spare.