SPECIAL REPAIRS TO OTM AND OFFICE COMPLEX OF ECSD BLDG NO H 42 H 46 H 54 H 57 AND H 60A AT BARANAGAR UNDER GE NORTH KOLKATA

Amount

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including rubbish off the premises complete all as specified and directed.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for keys, scrubbing down with water, etc.complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and Labour for 20 mm thick rendering in CM (1:4) in two layers, 10 mm thick in each layer and mixed with integral water proofing liquid admixture on top layer of external surfaces of brick work or concrete surfaces including finishing the surface even and smooth w/o using extra cement complete all as specified and directed. Note: ( Water proofing liquid admixture shall be measured and paid separately )

Supply only integral water proofing liquid admixture for cement mortar complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of newly plastered suface of walls and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and as directed.

Dismantling of Asbestos cement( Corrugated , semicorrugated etc.) sheets as in Roof covering , wall , ridge , hips valleys and flashings etc for the building structures not exceeding 10 m height from the average ground level complete all as specified and as directed .

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc. 15 cm thick (below or above ground level) complete all as specified and directed.

Material and labour for 75mm thick PCC (1:4:8) type D-2 (using 40mm garded stone aggragate) as in sub base of floors etc. complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, over 20 mm thick screed bed or bedding layer of mortar in CM (1:6) for laying floor finishes set, jointed with grey cement and pigment and pointed in neat cement slurry in floors complete all as specified and directed.

Material & labour for providing 40mm thick cement concrete (1:2:4) type B-1, (using 20mm graded stone aggregates) as in floor, laid in bays, finished the surface even and smooth using extra cement complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.

Supply and fix rolled mild steel Fe-410-w (grade E-250) quality A framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and directed.

Supply and fix steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars for glazed shutters, dovetailed or welded complete all as specified and directed.

Supply and fix steel ventilator with top hung shutter including hinges, steel peg stay etc. complete all as specified and directed.

Supply and fix in repairs 4 mm thick sheet glass of ordinary quality and glazing with oil putty in square n. exc 0.5 sq. m in each pane complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint on new steel surface exceeding 10 cm width or girth over a coat of red oxide primer including preparation complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint on old steel surface exceeding 10 cm width or girth including preparation complete all as specified and directed.

Material and labour for complete removal of existing treatment of old plastered surfaces of wall including washing, rubbing down and stopping of old treatment and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

Material and labour for preparation of old plastered surfaces of wall and applying one coat of white wash complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Supply and fix GI framework for seamless ceiling comprising for GI perimeter channel of 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleevless and screws at 450mm centre to centre /intermediate suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteness with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm including suspenders / hangers 6mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including taking down complete all as specified and directed.

Supply and fix 6mm thick high pressure steam cured non asbestos fibre cement designer ceiling board of size to suit grid mould (605 x 605mm as specified above) and fix in grid mould with necessary fixing arrangement as per manufacturer’s instruction complete all as specified and directed.

Supply and fix aluminium powder coated glazed or gauged shutter for sliding window (2 or 3 track) with aluminium channel section weighing not less than 0.55 kg per sqm including aluminium channel, including all necessary fittings such as roller, joining cleats, glazing clips, rubber packing aluminium screw as required etc. complete all as specified and directed. (Note:Wiremess/ glass shall be measured and paid separately)

Supply and fix powder coated anodised aluminium glass louver/ ventilators with blades of 10mm heavy duty with lever handle etc. complete all as specified and directed. (Note- Glass shall be measured and paid separately)

Supply and fix powder coated aluminium frame for doors, windows, ventilators (including 2/3 track) with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and directed.

Supply and fix 4mm thick sheet glass ordinary quality, glazing with aluminium beads in square/ rectangular exceeding 0.5 sqm in each pane fixed to aluminium frame complete all as specified and as directed.

Supply and fix 2nd class hard wood, plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003 (Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed.

Supply and fix 35mm thick 2nd class Hard wood factory made glazed and skeleton door shutters, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR Part-I, clause 8.24 (a) complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) for fixing of hold fasts block and similar work including necessary form work complete all as specified & directed.

Supply and fix mild steel work as in holdfast or similar article conforming to Fe-410-0 or Fe-310-0 including tarring and sanding complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and as directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing complete all as specified and as directed.

Supply and fix factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on back face, with particle board core, supply and fixing in frame at site as per specification and drawing complete all as specified and directed.

Supply and fix 100 mm size butt hinges, medium weight, stainless steel and fixed complete all as specified and as directed.

Supply and fix 100 mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and directed.

Material and labour for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed.

Supply and fix in repair 25mm dia powder coated aluminium curtain rod fancy type ( length from 0.90m to 1.8m) with fancy type end side brackets and fancy type hanging brackets complete all as specified and directed.

M&L for roughnening surface of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust, etc. complete all as specified and directed.

Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed

Material and labour for Light shade Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exc. 0.18 sqm but n.exc. 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for Light shade Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exc. 0.18 sqm but n.exc. 0.36 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering as backing coat in CM(1:4) complete all as specified and as directed.

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for coloured Glazed ceramic tiles in vertical surface 350x250x7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in skirting/ dados etc. over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed.

Demolition of reinforced cement concrete of roofs, floors , staircases, landing, chajjas and similar suspended works in ground floors beams(reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Material and labour for RCC (1:1.5:3) type A1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies canopies, deck slabs and in shelves and the like complete all as specified and directed. (Note: Reinforcement and formwork shall be measured and paid separately)

Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and as directed

Material and labour for TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and as directed.

M&L for kota stone slab 20-25mm thick in riser of step, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shed of the slab including rubbing and mirror polishing on marble/ granite / kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window -cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Formwork to soffits of concrete roof slabs and chajjas n exc 20cm wide complete all as specified and directed.

Suply and fix stainless steel sink made out of 1.00 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 495 X 420 mm with bowl size 410x330x160mm complete all as specified and as directed.

Supply and fix stainless steel kitchen Plate Rack of size 24''x30''x10'' complete all as specified and as directed.

Material and labour for 5 mm thick plastering in CM (1:3) on concrete surfaces as in sides of column, lintel, beam, chajja, facia, railing, RCC wardrobe etc including finishing the surface even and smooth without using extra cement complete all as specified and as directed

Material and labour for rendering 05mm thick in cement mortar (1:3) on concrete surfaces in ceiling and finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of wall by vaccum based sanding machine, applying wall care putty upto 1.50mm thick (Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of emulsion distemper white or coloured by Auto Roller over a coat of primer complete all as specified and as directed and as per manufacturers instructions.

Material and labour for complete removal of existing treatment from old plastered surfaces of wall by Vaccum based sanding machine, removal of nails etc & filling cracks/ hole with putty, applying wall care putty upto 1.5mm thick as required ( Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of emulsion distemper white or coloured by Auto Roller over a coat of primer complete all as specified and as directed and as per manufacturers instructions.

Material and labour for preparation of newly plastred surfaces of wall by vaccum based sanding machine and applying two coats of Anti Fungal paint white or coloured by Auto Roller over a coat of primer, including necessary scaffoldings complete all as specified and directed and as per manufacturers instructions.

Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall by Vaccum based sanding machine, removal of nails etc & filling cracks/hole with putty, and applying two coats of Anti Fungal paint white or coloured by Auto Roller over a coat of primer, including necessary scffoldings complete all as specified and as directed and as per manufacturers instructions.

M&L for applying 3mm thick wall care putty and applying two coats of oil bound distemper over a coat of alkali resistant primer of ceiling to newly plastered surface complete all as specified and directed.

M&L for complete removal of existing treatment of ceiling including washing, rubbing down and stopping of old treatement and applying 3mm thick birla wall care putty and applying two coats of oil bound distemper over a coat of alkali resistant primer to wall complete all as specified and as directed.

Supply and fix in repair pre laminated particle board 18/19 mm thick, interior grade one side decorative choice lamination and other side balancing white lamination fixed in cup boards shutters with 6mm thick teak wood lipping/edging all round complete all as specified and as directed.

Supply and fix in repair pre laminated particle board 18/19 mm thick, interior grade one side decorative choice lamination & other side balancing white lamination fixed in cup boards shelves with front side 6mm thick teak wood lipping/edging complete all as specified and as directed.

Supply and fix 100mm long hasp and staple, safety type, brass with mild steel hinges pin including bolt to hinge plate and fixed with brass screw complete all as specified and as directed.

Supply and fix Rotational moulded polyethylene water storage tanks (multi layer) 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Taking up or down 15mm dia steel tubing and connections, segregating serviceable pipe for reuse complete all as specified and directed.

All as per item No. 76 above but 20mm dia complete all as specified and directed.

M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth in brick wall complete all as specified and directed.

Supply and fix 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall or in floors etc complete all as specified and as directed.

All as per item No. 79 above but 20mm dia complete all as specified and directed.

S&F Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and fix in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P'or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed.

S&F in repair vitreous china EWC P & S Trap of size 400 x 365 x 540mm, white including plastic water closet seat,white closed pattern with flat bottom, and cover and mild steel chromium plated oraluminised hinging devicesuitable for EWC (excl flushing cistern and flush pipe) complete all as specified and as directed.

Supply and fix one pieced-white wash basin with pedestal 550 X 400 (oval/square pan) a/w brackets / MS nuts and bolts for fixing; fixed with CP waste coupling and connecting waste pipe etc. complete all as specified and directed.

S&F waste fittings, 32mm brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F 15mm bore pillar taps with aerator (Green water rating WEP-1) fancy type ,cast copper alloy ,with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for Iron pipe and fixed complete all as specified and directed. (Make: Prayag Cat No- 9302/ Equivalent model of Makes specified in PS)

S&F 15mm bore Bib taps with aerator (Green water rating WEP-1) , chromium plated fancy type bib taps with crutch or butterfly handle, screwed down, screwed down, screwed for iron pipe or for brass ferrule and fixed.(Make: Prayag Cat No- 9306/ Equivalent model of Makes specified in PS)

S&F 15mm bore single lever wall mixture (Green water rating WEP-1) , chromium plated wall with provision for overhead shower with flange screwed down, high pressure with crutch or butterfly handle screwed both ends for Iron pipe or for unions and fixed.(Make: Prayag Cat No- 9956 / Equivalent model of Makes specified in PS)

Supply and fix in repair brass chromium plated shower rose of 125mm size fixed including 15 mm dia CP arm complete all as specified and directed.

S&F in repair stop valve/angular stop valves fancy type chromium plated 15 mm dia screwed down, high pressure with crutch or butter fly handle, screwed both ends, fixed complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

Supply and fix in repair stop cock concealed type of 15mm bore fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.

Supply and fix 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 600mm complete all as specified and directed.

Supply and fix chromium plated towel rail of 20 mm dia, D type, 600mm long between flanges fixed with chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.

Supply and fix shower arm 15mm size , 195mm long with bend 45 degree with flange of PTMT any colour complete all as specified and directed.

Supply and fix grating doom 125mm dia of PTMT (Minimum wt 25 Gms) complete all as specified and directed.

Dismantling cast iron drain pipes 100mm, jointed in cement mortar obtained either from trenches/ wall as required complete all as specified and as directed. (Note : Excavation if required, shall be measured and paid separately)

Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.

Supply and fix 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured)/Tee complete all as specified and as directed.

Supply and fix 100mm bore cast iron cowls complete all as specified and as directed.

Supply and fix in PVC (SWR) pipe 110mm bore, type A, single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip complete all as specified and as directed.

Supply and fix PVC (SWR) bend/ shoe 110mm dia complete all as specified and as directed.

S&F High Density Moisture Resistant (HDMR) premium board ,one side decorative lamination and other side balancing white,100% termite proof,18mm thick heavy density,exterior grade cutting, fabricating and suitable fixing for kitchen cabinets and shelves of any size darwers openable leaf complete including fixing only accessories such as Italian stainless steel hinges,handles,magnets as required etc complete all as specified and directed as under:- (a) Stainless steel handle fancy type 100mm size. (b) Stainless steel hinge Italian pattern suitable for cabinet and shelves opening/closing operation. (c) Magnet of suitable size fixed for cabinet leafs, drawers. Make: Century Ply board . Note :- The rate includes BWP Ply board and all connecting items mentioned above and the design and pattern should be approved by GE prior incorporation.

Supply only stainless steel handle fancy type 100mm size and complete all as specified and directed.

Supply only stainless steel hinge Italian pattern suitable for cabinet and shelves opening/closing operation complete all as specified and directed.

Supply only magnet catchers suitable size for cabinet leafs and drawers complete all as specified and directed.

Taking down carefully copper / aluminium point wiring any type complete, including fixture and fittings any type removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. surfaces, complete all as specified and directed.

Material and labour for concealed point wiring with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm for phase,1.5 sqmm for neutral and 1.5 sqmm for earth continuty conductor drawn through and including PVC conduit medium grade with accessories of suitable size but not less than 20 mm and including suitable size of pressed steel sunken terminal box duly painted MS sheet and covered with suitable size thick insulated hylum sheet cover for fixing of switches, sockets etc. for one light point controlled by one switch complete all as specified and directed. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose,and PVC conduit for wiring etc and also making good the disturbed surfaces are deemed to be included in unit rate.

All as per Item No. 33 above but for one fan point controlled by one 5 Amp switch complete all as specified and directed.

All as per Item No. 33 above but for one 3/5 pin 5/6 Amp Socket outlet on the independent board complete all as specified and directed.

All as per Item No. 33 above but for one 3/5 pin 5/6 Amp Socket outlet on the same board complete all as specified and directed.

All as per item no 33 above but for FRLS PVC insulated 1100 volts grade unsheathed single core multistranded copper conductors 2.5 sqmm for fixing of 15/16 A switches, sockets, etc complete all as specified and directed.

M & L for concealed sub main wiring complete with 2 runs of 6 sq mm FRLSH,single core,PVC insulated,unsheathed cable,1100 volts grade,multi standard with copper conductor drawn through and including PVC conduit pipe and accessories on surface wall/floors/concealed etc. with one run of PVC insulated 6 sq mm copper conductor for earth continuity conductor including taking down old U/S wiring complete all as specified and directed. Note :- Two runs of cable one run of conduit and one run of copper wire shall be measured as one unit length.

Supply and fix switch piano flush button 5 Amp single pole one way 240 volt complete all as specified and directed.

Supply and fix socket out let 3/5 pin 5 Amp 240 volt complete all as specified and directed.

Supply and fix switch socket combination 3/5 pin 5 Amp 240 volt complete all as specified and directed.

Supply and fix switch socket combination 3/6 pin 15 Amp flush type 240 volt complete all as specified and directed.

Supply and fix ceiling fan regulator, electronic type, step type, 5 speed, AC, 230 Volts on the existing laminated sheet complete all as specified and directed.

Supply and fix celling rose surface,3 terminal of min da 63.5mm and ISI marked complete all as specified and directed.

S&F single pole and neutral DB wall mounting type,240 Volts,4 Way with 200 Amps rated bus bar,double door suitable for fixing MCB's including connecting etc and taking down U/S DB ,main switch complete all as specified and directed.

S&F single pole and neutral DB wall mounting type,240 Volts,8 Way with 200 Amps rated bus bar,double door suitable for fixing MCB's including connecting etc and taking down U/S DB ,main switch complete all as specified and as directed.

Supply and fix MCB SPN 40 Amps to 63 Amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified and directed.

Supply and fix MCB single pole 6 to 32 Amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified and directed.

Supply and fix air circulator metallic body heavy duty 600mm sweep complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S & F parabola ultra plus LED light 100 watt, new generation energy saving and environmental friendly long life made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having seperate driver compartment with IP66 protection and impact resistancevery high efficiency round highbay light in PDC housing sutiable for industrial application having efficacy > 140lm/W with 10kv SPD and ingress protection of IP 66 with additional safety chain, complete all as specified and directed.

Supply and fix in repair vertical TPN DB with MCCB incomer of 4 way in double door suitable for four pole MCCB (63A/100 A)as incomer including MCCB+12 modules incoming and outgoing make good of damaged surface/wall including re-connection with existing earth wire to DB complete all as specified and directed. Note:- MCCB shall be measured and paid seperatly.

Supply and fix MCB single pole 40 Amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified and directed.

Supply and fix in repair MCCB triple pole & neutral 40-100 amps,,16 KA, with all incoming / outgoing connections suitable for fix 6 way vertical type TPN DB in double door twith proper size of aluminium lugs complete all as specified and directed.

M&L for cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cils, sunshades sheleves, lintels, etc and cutting chases for concealed water tubing or concealed conduict wiring etc and making good cutting not exc 10 cm grith complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (1991) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways complete all as specified and directed.

RADHA ENTERPRISE

PODDAR SALES CORPORATION

SEN ELECTRIC WORKS

SHRI MILAN CHANDRA DAS

NUPUR CONSTRUCTION

S C ROY AND CO

SPECIAL CONCRETE AND CONSTRUCTION CO.