Estimate for Laying UPVC U/G Pipeline for outlet RD 16900/R of Kunjar Disty.

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

First class brick masonary 229 mm thick laid in cement sand mortar 1.6 in foundation and plinth

10mm thick cement plaster 1.4 on sides walls

10mm thick cement plaster 1:4 on bed and top

Reinforced cement concrete 1:2:4 hand mixed but including steel reinforcement

Cement Conc.1:2:4 including supply, carriage & with stone ballast or shingle

Cement concrete 1:4:8 with brick ballast 40mm gauge

Laying and jointing of UPVC pipe315 mm dia of 2.5 kg/ sq cm pressure ISI Marked UPVC Pipes as per ISI- 4985 along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointingand testing complete as per specifications

providing, laying, fixing, testing andcommissioning of ‘C‘ Class heavy duty MSPipe conforming to Indian Standard IS :1239/3589 including fittings liketees,bends ,sockets,elbows,flanges, tapers, nuts bolts,gaskets etc. fixing the pipe on the wall /ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete in all respects.(d) 50 mm dia

Wrought Iron and mild steel ladders, framed grills, grating etc. complete fixed in position in D-tank

Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm

Providing and fixing of Alfa Alfa Valve315 mm dia fitted on riser pipe to act as Nakka (D regulators)

Centering and Shuttering for Concrete faces

Providing & Fixing of Steel Shutter Gate Assembly in Main Pipeline complete in all respect

Providing and fixing 315 mm Elbow/bends of 90 degree 6kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge

Providing and fixing 315 mm Elbow/bends of 45 degree 6kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge

Providing and fixing 315 mm equal Tee of 6kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge

Providing and fixing MS service saddle 315 x 50mm as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge

Providing and fixing Tail end piece 315 mm of 6 kg/cm2 pressure as per IS 4985 i/c testing commisioning complete in all respect to the satisfaction of engineer in charge

Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing all carriages complete .C.I Single air valve (Size 50mm)

Excavation by mechanical means (JCB or hydraulic excavation) in trenches for pipeline with straight or open cutting in streets or open area including dressing sides levelling of beds of tranches to correct grade, cutting joint holy, refiling consolidation including the cost of diversion for traffic crossing over trenches for across to houses watching fencing etc. and removal of surplus soil outside inside the town involving lead up to 15 m complete in all respect.

Any Other

# of occurrences