Supply and fixing of Doors window screen and platform for council hall in new office building at ward no 18 in Thirumuruganpoondi Municipality

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Supplying and laying in flooring with fully polished Sinthetic Grey colour Granite stone of 20mm thick (average) of 4' X 2' in size laid over base layer of cementmortar 1:3 (one cement and three Plastering sand) - 20 mm thick and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers

Supply of Curtains Work with Curtain Deluxe Track Channel & Using 100 % polyster,300 cm /200 G/ M+5% +(B-7 Grade Material )(10x6 cm) Thickness Including Cost & Conveyance Etc size= 6 x 5 = 30 sqft, rate.290 = 8700

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supplying and fixing of cubicle partition walls, with cubicle sizes as per measurements and the required colour of 12mm compact laminate HPL boards. The door size is 600mm x 1785mm, and the panel width is 1700mm. The overall height is 1995mm (including 150mm ground clearance), with the following accessories: Stainless steel (Grade-316) and aluminium, SS gravity hinges, SS adjustable legs, SS coat hooks, SS door knobs, aluminium U-channels, SS locksets with indicators, anodized aluminium top rails, aluminium door stopper channels, screws (SS Grade-304) and wall plugs, and noise-deafening tapes for grooves in doors and pilasters. The work shall be complete and as directed by the departmental officers.(Suitable for Toilet Portion)

Manufacturing, supplying and fixing of Teakwood ornamental Entrance door of size 1.20x2.10m with the following specification. The outer frame of ornamental Entrance Door of size 150x100mm Teak wood scantling. The door consists of openable area 1.06x2.03m with single leaf. The each openable shutter consists of Top Panel for 1.10m height and bottom vertical panel for a height of 1.00m. The Shutter bottom rail is of 200x50mm size and middle,top and side rails are of size 150x50mm with corner designed beading works. The shutter pannel is of 50mm thick T.W.planks with special curving works.The outer frames corners are designed border works single side for entrance outer frame and on both sides for middle frame. The cost includes all kinds of furniture fittings, such as special type heavy Brass Aldrop 300x20mm 1 No, special type heavy Brass tower bolt 300mm length 1 No and 200mm length 1 no, special type heavy brass hinges 200mm length 4Nos, special type door stopper 1 No, special type Ornamental door handles 2 Nos, Door bush and Door stopper etc., All the members are finshed with two coats of melamine polish outer the priming coat complete and as directed by the departmental engineers.M-2953

GST 18%