Upgradation/ Modernisation of existing parks under Nazul A/c-II.

Amount

SCHEDULE ‘A’ Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

(b) 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :

(a) White sand stone exposed face find dressed with rough base 30 mm thick fine

(b) 30 mm thick Red sand dressed stone flooring over 20 mm average thick of cement mortar 1:5 (1 Cement: 5 coarse sand with joint flush).

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing and fixing of 24 mm thick with interlocking type factory made SBR tile Styrene Butadiene Rubber) in single color, Tile should highly compressed with best quality binder, SBR tile pasted on smooth concrete surface with the held of good quality rubber adhesive.

Schedule 'B' Providing & Installing the Mini Play House of make ARIHANT//KOMPAN/LANSCAPE STRUCTURES/OKPLAY/LEO/KAALIA. Of size 6.0x1.80 mtr with Slide. Main Frame made of Round 80 NB pipe having min ‘B’ class G.I. pipe. All the pipes should ISI Marked (as per the IS 1293/2004) & of reputed brand. Ensuring the strength, durability, stability & long life to the kids structures with safety as paramount. Deck having 1035mm x750mm with collar of 65 mm size made of perforated sheet. Hydraulic Precision punched holes made of min 10mm NB with sheet thickness of approx. 2.5mm. Components:- FRP (Fiber Reinforced Plastic) Main Sunshine Line designer Roof having min 2-4 layers (approx. 4mm thickness) with bright colours being UV resistant ladder main frame made of round pipe 25mm NB pipe & Ladder rungs made of 15 mm N.B. pipe having width of 400mm x 70mm (approx..) All the pipes should be ISI marked (as per the IS1239/2004) & of reputed brand. Tree climber made of main frame pipe of 25mm NB round pipe & rungs made of 20mm NB round pipe. All the pipes should ben ISI marked (as per the IS 1239/2004) & of reputed brand. Spring coil climber : made of main frame pipe of 25mm NB round pipe & springs made of 20mm NB round pipe. All the pipes should be ISI marked (as per the IS1239/2004) & of reputed brand. A Rotomolded plastic LLDPE made Line panel with UV stabilized colour fading resistant. Having size of 1035mm x 750mm & thickness of 70mm heavy & strong for long term durability & great aesthetic look & finish. Safety panel fitted on M.S> round pipe 20mm NB with size of 1035mm(L)x750mm(W) having wall thickness 70m. Slide having height of 1220mm approx. & length approx. 2mtr made of metallic GI sheet of high strength having width of 400mm mounted on MS angle support of 40x40x4 mm & 5 nos. angle supports & 20mm NB round pipe hand rail. The ladder step of metallic side should made of MS rectangular pipe of 70x23mm in minimum thickness of 2mm with vertical hand rill support of size 20mm NB GI pipe with other necessary supporting pipes. The complete structure mini play house should be powder coated with minimum powder coating thickness of 60-80 microns.Safety panel/top canopy should also attached with help of colourful nylon clamps. Accessories : Nut bolts- All approved GI nut bolts Galvanized Iron with High tensile strength. Kid capacity 2-8 Nos. All complete as per drawings attached/as per the direction of Engineer-in-charge including maintenance cost for 1st year.

Providing 7 installing the Double Arch Swing of make ARIHANT/KOMPAN/LAND SCAPE STRUCTURES/ PLAY/LEO/KAALIA of size 3.10x1.50 mtr. Main frame :- Main Cross Bar made of round 75mm O.D. pipe and legs made of 50mm NB pipe legs. Arch shaped bended (Must be in in GI ‘B’ class pipe). T pipe will be required for the Cross bar. All the pipes should be ISI marked (as per the IS 1239/2004) & of reputed brand. Ensuring the Strength, durability, stability & long life to the kids structures with as paramount. Seats :- Belt Type Seats made of Synthetic Rubberized material/Fiber reinforced fabric materials of Virgin Reinforced material & also duly with UV resistant colors, Chain made of approx. 6mm thick GI chain with rubberized coating of with 3mm minimum thickness. Chorme plated supporting hook for belts hooks for convenience & height adjustment/Seat movement, self-lubricated council type bush baring clamps provided with rubber coated chain to be hang the complete belt assembly. The complete structure double arc swing should powder coated with minimum powder coating thickness of 60-80 microns Accessories : Nut bolts to be used all approved GI nut bolts Galvanized iron with High tensile strength. Kid capacity 2-4 Nos. All complete as per drawings attached/as per the direction of Engineer-in- Charge including maintenance cost for 1st year.

Providing & installing the SEA SAW DOUBLE of make ARIHANT//KOMPAN/LANSCAPE STRUCTURES/OKPLAY/LEO/KAALIA of sixe 2.0x2.50 mtr main frame : made of see saw made of 50mm NB pipe with planks made of 40mm NB pipe and supports made of 20mm NB pipe, all the GI pipes should be “B” class & ISI marked (as per the IS 1239/2004) & of reputed brand make & Ensuring the strength, durability, stability & long life to the kids structure with safety as paramount. Seats – Seat made of FRP (Fiber Reinforced Plastic) duly UV resistant colors, all chemical in the FRP material should best quality, the fiber Mat of 450GSM to be used for strength & stability with supporting frame, FRP Seat size (approx..) 10”(L)x8”(W) with back rest. The complete structure see saw double should be powder coated with minimum powder coating thickness of 60-80 microns Accessories Nut bolts All approved GI nut bolts Galvanized Iron with High tensile Strength Kid capacity 4 Nos. Complete as per drawings attached. All complete as per drawings attached/as per the direction of Engineer-in-charge including maintenance cost for 1st year.

Providing & installing the SINGLE WAVE CLIMBER of make ARIHANT//KOMPAN/LANSCAPE STRUCTURES/OKPLAY/LEO/KAALIA of size 1.75x0.80mtr. Main Frame : Main frame of single wave climber pipe made of round 32mm NB pipe (Must be min in GI “B” class pipe) and rungs made of 20 mm NB pipe – ‘U’ Shaped bended (will thickness approx.. min 1.5mm – 2.2 mm only), All the pipes should be ISI marked (as per the IS 1239/2004 & of reputed brand & Ensuring the strength, durability stability & long life to the kids structure with safety as paramount. The complete structure single wave climber should be powder coated with minimum powder coating thickness of 60-80 microns. Accessories : Nut bolts – All approved GI nut bolts Galvanized Iron with High tensile strength Kid capacity – 2 to 4 Nos. All complete as per drawings attached/as per the direction of Engineer-in-charge including maintenance cost for 1st year.

Providing & installing the TODDLER SWING of make ARIHANT//KOMPAN/LANSCAPE STRUCTURES/OKPLAY/LEO/KAALIA of size 2.40x1.50mtr. Main frame : Main Cross Bar of toddler swing made of round 65mm NB pipe and supporting T Bar made of 50mm NB pipe (main cross bar & T supporting Bar should be in GI ‘B’ class pipe all the pipes should be ISI marked (As per the IS 129/2004) & of reputed brand make with goo wall thickness. Ensuring the strength, durability stability & long life to the kids structures with safety as paramount. Seats – Bucket Type Seat made of Synthetic Rubberized material or Virgin Plastic material & also duly with UV resistant colors, Chain made of approx. 6mm thick GI chain with rubberized coating of with 3mm minimum thickness Chorme plated supporting hook for belts Hooks for convenience & height adjustment/Seat Movement, self-lubricated council type bush baring clamps provided with rubber coated chain Toddler Swing to hang the complete bucket assebbly. The complete structure should powder coated with minimum powder coating thickness of 60-80 microns. Accessories : Nut bolts to be used all approved GI nut bolts Galvanized Iron with High tensile Strength.Kid capacity 2 & Recommended Age Group – 2 to 8 yrs. All complete as per the drawings attached/as per the direction of Engineer-in-charge including maintenance cost for 1st year.

Maintenance charges for children play equipment

a) For 2nd year

b) For 3rd year

Schedule 'C' Providing and fixing of MULTI ACTIVITY PLAY SYSTEM of Make ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/OK PLAY/LEO/ KAALIA with consist of various activity like Roller slide, Wave slide, Spiral Slide, Net Clamber, Spiral Climber, Bridge Connector/Tunnel, Bubble panels, along with brail panels for blind childrens. The structure of complete MAPS made with B-class GI Pipes with powder coating process of 60-80 Microns. a) 3 Nos. Hex Deck with Canopy: The platform shall be made of Fiber Reinforced Plastic with anti-skid surface. The platform will be powder coated. The platform should be of regular Hexagonal shape. The top canopy shall be made of Fiber Reinforced Plastic with a minimum thickness of 2-3 mm. Canopy is assembled from six modules and at the top of its dome is fixed. b) FRP Ladder: The ladder shall be made up of Fiber Reinforced Plastic with a conservative thickness of 4 mm. Ladder should have reinforcement to maintain strength and avoid bending. The top surface of the ladder should be such that it should not deserve any kind of kiddy movement. c) FRP Roller Slide: In the roller slide the rollers are made up of HDPE with UV stabilized pigments of 2.5 mm thickness provided with Nylon bush and are mounted on 12 mm Dia. rod and fix in slide chute. The frame of the slide is made from 50x50x5 ms angle and handrail is 25 NB GI pipes. The landing support is made from 25 NB pipes. d) Spiral Slide: Spiral slide chute is made of fiber reinforced plastic having shell thickness of 4 mm. The back side of the slides is at surface matel with platform effect slide is supported on 80 NB center GI pipe. Landing module is supported by 20 NB pipe. Railing is made up of LLDPE in roto mould process. It is support by 20 NB GI pipes. The support pipe is powder coated to avoid rusting of the pipe. e) Roto Railing: Railing is provided for all the decks for safety purpose. It is made up to low-density polyethylene plastic in rotational mould process and has a support of 20 NB powder coated GI pipes. The railing is attached to the support pipe using a nylon clamp. f) Spiral Climber: It is fabricated out of 25 NB GI pipes. The spiral structure is suitably bent and is kept standing with vertical 40 NB GI pipe support. g)Rope Net Climber: It is made out with powder coated 20mm O.D. and 25mm O.D. GI Pipe Frame having nylon clamps in PP Rope. h) Bridge Connector/Tunnel : It is made out 5mm thick FRP sheet in appropriate shape & color having connecting arrangement at both ends. i) Tactile Panel: Tactile panels to be provided at site of MAPS for the blind children. j) Bubble panel: olorful bubble panel provided around the MAPS for the more fun.k) Wave slide 1.5 Mtr. : This FRP wave slide consists of ISI marked structure. The attractive FRP wave slide chute is made up of 4 mm thick fiber reinforced plastic. The structure is made up of 20 NB and 25 NB powder coated GI pipes. The slide is supported on 80 NB powder coated GI pipes. The ladder cum railing is made 20 NB and 25 NB GI pipes respectively. The platform of the slide is made up of 14 SWG GI sheet with anti-skid for firm foot grip. There are triangular steps 16 SWG GI sheet. The slide chute has its end such as it causes safe landing of the child. The play area of complete MAPS is 10 Mtr. x 7.5 Mtr. Appox. and required safe play area 12x9.5 Mtr. Appox. The manufacturing of play equipment as per the All international standards (ASTM/ F1487/ F1292/F2223/ BS/EN/1176).

Providing & Fixing of WHEEL CHAIR SWING for physical disable person of The arc shaped powder coated main frame of B-Class GI Pipe connected with swinging clamps, Rubber coated chain and specially design handicap swinging seat along with height adjustment feature & supporting clamps hooks etc. A suitable GI platform to be provided at bottom side of swing for easy movement of disable person to use the play equipment at site. The play area of complete Wheel Chair Swing is 2.0 Mtr. x 3.0 Mtr. Appox. and required safe play area 5x5.5 Mtr. Appox. The manufacturing of play equipment as per the All international standards (ASTM/ F1487/ F1292/F2223/ BS/EN/1176) including maintenenace cost for 1st year.

Providing and fixing of TODDLER SWING make ARIHANT/KOMPAN/LANDSCAPE STRUCTURE/OK PLAY/LEO/KAALIA. In the toddler swing the center support is made up of 80 NB GI pipes. The horizontal bars are made up of 50 NB powder coated GI pipes. The bucket seats of the toddler swing are made of rubber with anti-skid. The ball bearings are mounted inside specially designed nylon balls. The rubber seat is affixed on 6 mm thick GI chain. The seats are made with full care so that the child does not fall from it while swinging. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st Year.

Providing and fixing of MULTI SEATER SEE SAW make ARIHANT/KOMPAN/LANDSCAPE STRUCTURE/OK PLAY/ LEO/ KAALIA. The Multi Seater See saw comprises four Rotational seats. The lever consists of 20 NB and 80 NB powder coated GI pipes. The bearing used in this product is heavy duty nylon bush type. The stand for see saw is made using 50 NB GI pipe. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st Year.

Providing and fixing of Double Arch swing make ARIHANT/KOMPAN/LANDSCAPE STRUCTURE/OK PLAY/ LEO/ KAALIA. The arch shaped side frame of the double arch swing is made up of 80 NB GI pipe and top pipe is made up of 50 NB GI pipe. The frame is powder coated to give an esthetic look. Seates - Belt Type Seats made of Synthetic Rubberized material/Fiber reinforced fabric materials of Virgin Reinforced material. The belt seat is suspended on 6 mm rubber coated GI chain. The ball bearings are mounted inside a specially designed nylon clamp. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st year.

Providing & fixing of SPRING RIDER BIKE (RACER) make ARIHANT/KOMPAN/LANDSCAPE STRUCTURE/ OK PLAY/ LEO/ KAALIA. The typical Spring Rider is comprises of Flexible Spring & HDPE sheets of high quality. It’s specially made for kids in between 3 to 8 yrs. It’s designed specially keeping in mind growing kid’s mental development aspects & safety aspects. Playing on this spring rider will enable the kids to develop coordination between force & balance which is required for proper mental development. It also enhances griping power of children which will in turn strengthen growing bones. The rest is only fun that’s required for emotional development of a children. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st year.

Providing & fixing of SPRING RIDER DUCK make ARIHANT/KOMPAN/LANDSCAPE STRUCTURE/OK PLAY/ LEO/ KAALIA. The spring rider being a whale/pony or bike rider provides an unlimited fun to the children riding on it. The whale/pony or bike is made out from fiber reinforced plastic (FRP). The handles of duck & pony provided for gripping is made up of 15 NB GI pipes, whereas the duck is made out of LLDPE in rotational molding. The duck is mounted on a pair of heavy-duty compression spring. Also a GI flat is provided for footrest. The spring is mounted on 5mm thick plate. And the stand for support is made out of 40 NB pipe. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st year

Providing & fixing of LOOP RUNG SCRAMBLER make ARIHANT/KOMPAN/LANDSCAPE STRUCTURE/OK PLAY/ LEO/ KAALIA. This loop rung provides hanging experience to the children. The frame is fabricated out of 40 NB and 25 NB powder coated GI pipes. There are nine triangular loops made from 15 NB, which are welded to the top pipe of the frame. The top pipe is made out of 80 NB GI pipes. The ladder used is designed to the side support pipe itself. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st year.

Providing & fixing of MINI SLIDE make ARIHANT/KOMPAN/LANDSCAPE STRUCTURE/OK PLAY/ LEO/ KAALIA. , The center support of the Mini Slide is made up of 50 NB GI pipe. The slide is made from Fiberglass reinforced plastic (FRP). The thickness of the mini slide is 3-4 mm with proper reinforcement to support the module. The triangular steps of 16 SWG are provided and the ladder frame is made in 20 NB and 25 NB powder coated GI pipe. The landing support is made up of 25 NB GI pipes. The ladder is designed in such a way there won’t entrap child’s foot while playing. The pure polyester powder coating done on the pipes extends the life of equipment. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st year.

Maintenance charges for children play equipment

a) For 2nd year

b) For 3rd year

HIRAVATI ENTERPRISES