Constuction of main gate wrok from ward office and utsav house under zone-5 ward-81

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by Engineer-in-charge within a distance of 60 meters (200 feet).

Dismantling of girder, trusses and other steel work including stacking of dismantled materials as directed by Engineer-in-charge with in a distance of 60 meters (200 feet).

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m as directed by engineer- in- charge; 2.1.1 all kinds of soil.

1:6:12 (1 cement 6 coarse sand (zone-III): 12 graded Brick aggregate 40 mm (nominal size)

Brick work with common burnt clay (non modular) bricks of class 150 in foundation and plinth in: Cement mortar 1:4 (1Cement: 4 C-Sand

Providing and laying damp proof course 25mm thick with cernent concrete 1:2:4 (1 cement: 2 coarse sand (zonelll): 4 graded stone aggregate 12.5mm nominal size)

Brick work with common burnt clay (non modular) bricks of class-150 in superstrutre above plinth level up to floor V level in all shapes and sizes Cement mortar 1:4 (1 cement: 4 coarse sand)

12 mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand)

Finishing walls with putty approved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all materials, labour, T&P etc. required for proper completion of work.

Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undacorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat of primer applied @ 0.75Ltr/10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work. for two coat.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 15: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete.

Supply and fixing of anodized aluminium partition having 2mm thick section partly glazed and partly 12mm thick laminated board. With all fitting, glass panes of4mm thick handle and locks complete.

Providing and toxing partition upto ceming regnty consisting of G.l. frame and required board, including providing and fixing of frame work made of special section power pressed/roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metall screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including joining and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and tun coats of primer suitable for

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including:

supply of 1.80x0.90m size table of apporoved quality with toughen all charges

suppy of 1.50x0.90m size table of quality with toughen all charges

supply of black genuine leather writing desk laether table top elevotar with abjustable height for easy reading & writing work etc all complete

supply of visitor chairs of apporoved quality (neelkamaal) with all charge complwtw

supply of revolving executive chair of approved quality with all charges complete

Lenovo CPU 12th Gen 8 GB Ram 512 GB SSD with windows 11 and 20 inch Led Monitor Lenovo with Keyboard and Mouse inci etc all complete.

Add GST