PROVN OF CHAIN LINK FENCING ALONGWITH GATE FOR PARK LOC AT JCOs/ORs GOVT MD ACCN AT DCN SUB GP DABATHWA UNDER GE(U) E/M MEERUT

Amount

Excavation in trenches n exc 1.5 m wide n exc 1.5 m deep in hard/ dense of soil for foundation etc or for shaft, wells, manholes etc n exc 10 sqm on plan and not exc 1.5 m in depth and getting out.

Returning ,filling in including spreading ,levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick

Excavation in post holes or similar holes nexc 05 cum each in soft/ loose soil , getting out returning filling in and ramming with earth or broken rubble around in layers not exc 25 cm watering etc and removing surplus soil to 50 m distance and making good surface.

Removing excavated soil not exceeding 50 m distance and depositing where directed at alevel n exc 1.5 metre above the starting point .

M& L Cement concrete 1:3:6 Type C 2 (using 40 mm graded aggregate ,in foundations, filling and mass concrete

M &L Brickwork with subclass 'B' old size bricks, straright or corved on plan exc 6m mean radius built in Cement mortar 1:6

S&F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) ., and similar work conforming to Fe 290 gde E 165

Supply only chainlink fencing 3.8 mm dia of wire and 50mm x 50mm size of mesh etc complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire.

S & F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails all as specified.

Mild steel round bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to conforming to Fe 250 gde E 165 or Fe 410W gde E 250.

Supplied and fixed mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed th eother, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut 12-20 mm dia of neck and exc 00cm and n exc 30 cm long,

Manufacturing of ornamental and decorative type steel gate with structural steel conforming to Fe 410-o or 310-O all as specified, revolving on bearing plate including pintal hinges fixed on pillar in PCC blocks of size as required as site , including all locking arrangement, all as per sample approved by the Engineer -in -Charge and dirceted and fixed in position Note :-1 . The weight of manufactured steel gate shall be decided by the BOO which will be convened by GE , before the same is fixed in position . Necessary arrangement for weighting the steel gate shall be made by the contractor at his own expense . The contractor shall quote the unit rate accordingly.2. Steel gate shall be manufactured as per sample approved by the Engineer -in - charge . Photographs for the samples shall have to be collected by the contractor from the manufacturer of the gates in the area or approval of the Engineer -in -charge.The cost of the same shall be deemed to be inclusive in unit rate accordingly.

M&L rendering 15 mm thick in cement mortar 1:4 on wall of brick work or concrete surface, finished fair and even all as specified and directed.

M&L for preparing the new plastered surfaces and applying three coats of white wash on walls all as specified and direcrted.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide all as specified and directed.

M&L for preparation of new steel surfaces of any description not exceeding 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide all as specified and directed.

Arun Construction Co.

Tridev Construction Company

Shri Kanchan Engineers

SHAKTI CONSTRUCTION CO

M/S AGARWAL CONSTRUCTION CO.