Construction of Administrative-cum-Academic Block for the College of Horticulture at Morena (M.P.), under RLBCAU Jhansi- Sub Pkg-2

Sl. No. DSR-2023 DESCRIPTION DSR Amount MR Amount

B 4.0 CONCRETE WORKS ₹ 3,077,639.00 ₹ 0.00

C 5.0 REINFORCED CEMENT CONCRETE WORKS ₹ 93,484,749.00 ₹ 0.00

E 8.0 MARBLE & GRANITE WORKS ₹ 2,678,403.00 ₹ 339,921.00

K 21.0 ALUMINIUM & STRUCTURAL GLAZING WORK ₹ 3,757,904.00 ₹ 5,214,830.00

L 22.0 WATER PROOFING WORKS ₹ 353,810.00 ₹ 0.00

Add: Impact of Multiplying factor on DSR 2023 ₹ 191,961,952.78

GRAND TOTAL ₹ 220,879,129.78

GRAND TOTAL ₹ 220,879,129.78

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Name of Project: Development of Administrative-cum-Academic Block for the College of Horticulture at Morena (M.P.), under RLBCAU.

ESTIMATE CIVIL WORKS_ADMIN CUM ACADEMIC BUILDING

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

A 2.0 EARTH WORKS

Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m

1 2.6 in width as well as 10 sqm on plan) including getting out and disposal of

excavated earth lead upto 50 m and for all lift, as directed by Engineer-

Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m

3 2.7 in width as well as 10 sqm on plan) including getting out and disposal of ₹ 0.00

excavated earth lead upto 50 m and lift upto 1.5 m, as directed by

Engineer-incharge.

Extra for every additional lift of 1.5 m or part thereof in excavation /

banking excavated or stacked materials.

ii 2.26.2 Ordinary or hard rock Cum 2739.15 ₹ 227.40 ₹ 622,883.00

Excavating trenches by mechanical / manual means of required width

for pipes, cables, etc including excavation for sockets, and dressing of

sides, ramming of bottoms, for all depth, including getting out the

excavated soil, and then returning the soil as required, in layers not

exceeding 20 cm in depth, including consolidating each deposited layer

by ramming, watering, etc. and disposing of surplus excavated soil as

directed, within a lead of 50 m :

a) 2.10.1 All kinds of soil ₹ 0.00

Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia

Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations etc. in layers not exceeding 20cm in depth,

consolidating each deposited layer by ramming and watering, lead up

to 50 m and lift upto 1.5 m.

Carriage of Earth by mechanical transport including loading, unloading

8 1.1.2 and Stacking including royalty & carriage up to 5 KM complete. Cum 312.86 ₹ 326.68 ₹ 102,205.00

Carriage of Excavated rock by mechanical transport including loading,

9 1.1.4 unloading and Stacking including royalty & carriage up to 5 KM Cum 2739.15 ₹ 522.70 ₹ 1,431,754.00

Supplying and filling in plinth with sand under floors including, watering,

ramming consolidating and dressing complete.

Surface dressing of the ground including removing vegetation and

11 2.28.1 inequalities not exceeding 15 cm deep and disposal of rubbish, lead up Sqm 2904.93 ₹ 34.15 ₹ 99,203.00

to 50 m and lift up to 1.5 m. All kinds of soil.

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

Supplying chemical emulsion in sealed containers including delivery as

i 2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% litre 309.41 ₹ 234.75 ₹ 72,634.00

Anti termite treatment ₹ 0.00

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL

14 2.35 anti-termite treatment (excluding the cost of chemical emulsion) : ₹ 0.00

Treatment of soil under existing floors using chemical emulsion @ one

litre per hole, 300 mm apart including drilling 12 mm diameter holes

and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to

match the existing floor :

i 2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. Sqm 2320.57 ₹ 310.05 ₹ 719,494.00

TOTAL (Carried Over to Summary of Civil Works) ₹ 6,563,657.00 ₹ 0.00

B 4.0 CONCRETE WORKS

Providing and laying in position cement concrete of specified grade

1 4.1 excluding the cost of centering and shuttering - All work up to plinth

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources :

i 4.1.5 6 graded stone aggregate 20 mm nominal size derived from natural Cum 4.60 ₹ 7,294.70 ₹ 33,545.00

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources :

ii 4.1.8 8 graded stone aggregate 40 mm nominal size derived from natural Cum 369.18 ₹ 6,812.00 ₹ 2,514,836.00

Centering and shuttering including strutting, propping etc. and removal

of form work for :

i 4.3.1 Foundations, footings, bases for columns Cum 426.35 ₹ 392.15 ₹ 167,195.00

Providing and laying damp-proof course 50mm thick with cement

concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural

sources : 4 graded stone aggregate 20mm nominal size derived from

natural sources).

Extra for providing and mixing water proofing material in cement

4 4.12 concrete work in doses by weight of cement as per manufacturer's per 50 kg cement 29.69 ₹ 18.15 ₹ 539.00

Providing & applying a coat of residual petroleum bitumen of grade of

VG-10 of approved quality using 1.7kg per square metre on damp proof

course after cleaning the surface with brushes and finally with apiece of

cloth lightly soaked in kerosene oil.

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

Making plinth protection 50mm thick of cement concrete 1:3:6 (1

cement : 3 coarse sand (zone-III) derived from natural sources : 6

graded stone aggregate 20 mm nominal size derived from natural

6 4.17 sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, Sqm 383.13 ₹ 749.30 ₹ 287,079.00

well rammed and consolidated and grouted with fine sand, including

necessary excavation, levelling & dressing & finishing the top smooth.

TOTAL (Carried Over to Summary of Civil Works) ₹ 3,077,639.00 ₹ 0.00

C 5.0 REINFORCED CEMENT CONCRETE WORK

Centering and shuttering including strutting, propping etc. and removal

a 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 769.08 ₹ 392.15 ₹ 301,595.00

Walls (any thickness) including attached pilasters, butteresses, plinth

and string courses etc.

c 5.9.3 Suspended floors, roofs, landings, balconies and access platform. Sqm 8157.41 ₹ 927.25 ₹ 7,563,959.00

d 5.9.4 Shelves (Cast in situ) Sqm 65.13 ₹ 927.25 ₹ 60,390.00

e 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 6882.72 ₹ 736.40 ₹ 5,068,437.00

f 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. Sqm 4963.95 ₹ 961.30 ₹ 4,771,845.00

g 5.9.7 Stairs, (excluding landings) except spiral-staircases. Sqm 432.44 ₹ 764.95 ₹ 330,793.00

Small lintels not exceeding 1.5m clear span, moulding as in cornices,

i 5.9.15 window sills, string courses, bands, copings, bed plates, anchor blocks Sqm 110.82 ₹ 392.15 ₹ 43,459.00

j 5.9.16 Edges of slabs and breaks in floors and walls ₹ 0.00

k 5.9.19 Weather shade, Chajjas, corbels etc., including edges. Sqm 50.00 ₹ 951.10 ₹ 47,555.00

Extra for additional height in centering, shuttering where ever required

with adequate bracing, propping etc., including cost of de-shuttering

2 5.11 and decentering at all levels, over a height of 3.5 m, for every additional ₹ 0.00

height of 1 metre or part thereof (Plan area to be measured).

Suspended floors, roofs, landing, beams and balconies (Plan area to be

Steel reinforcement for R.C.C. work including straightening, cutting,

3 5.22 bending, placing in position and binding all complete upto plinth level. ₹ 0.00

i 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 96250.72 ₹ 107.85 ₹ 10,380,640.00

Steel reinforcement for R.C.C. work including straightening, cutting,

4 5.22A bending, placing in position and binding all complete above plinth level. ₹ 0.00

i 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 277025.10 ₹ 107.85 ₹ 29,877,157.00

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

Providing and laying in position ready mixed or site batched design mix

cement concrete for reinforced cement concrete work; using coarse

aggregate and fine aggregate derived from natural sources, Portland

Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting

of concrete, to improve durability and workability without impairing

strength; including pumping of concrete to site of laying, curing,

carriage for all leads; but excluding the cost of centering, shuttering,

finishing and reinforcement as per direction of the engineer-in-charge;

for the following grades of concrete. Note: Extra cement up to 10% of

the minimum specified cement content in design mix shall be payable

separately. In case the cement content in design mix is more than 110%

of the specified minimum cement content, the contractor shall have

discretion to either re-design the mix or bear the cost of extra cement.

a) 5.33.1 All works upto plinth level ₹ 0.00

Concrete of M25 grade with minimum cement content of 330 kg /cum

Concrete of M30 grade with minimum cement content of 350 kg /cum

b) 5.33.2 All works above plinth level upto floor V level ₹ 0.00

Concrete of M25 grade with minimum cement content of 330 kg /cum

Concrete of M30 grade with minimum cement content of 350 kg /cum

Add for using extra cement in the items of design mix over and above

the specified cement content therein.

Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four

floors or part thereof.

Providing and fixing of expansion joint system related with floor

location as per drawings and direction of Engineer-In-Charge. The joints

system will be of extruded aluminum base members, self aligning / self

centering arrangement and support plates etc. as per ASTM B221-02.

The system shall be such that it provides floor to floor /floor to wall

expansion control system for various vertical localtion in load

application areas that accommodates multi directional seismic

movement without stress to it's components. System shall consist of

metal profiles with a universal aluminum base member designed to

accommodate various project conditions and finish floor treatments.

The cover plate shall be designed of width and

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

thickness required to satisfy projects movement and loading

requirements and secured to base members by utilizing manufacturer’s

pre-engineered self-centering arrangement that freely rotates / moves

in all directions. The Self – centering arrangement shall exhibit circular

sphere ends that lock and slide inside the corresponding aluminum

extrusion cavity to allow freedom of movement and flexure in all ₹ 0.00

directions including vertical displacement. Provision of Moisture Barrier

Membrane in the Joint System to have watertight joint is mandatory

requirement all as per the manufactures design and as approved by

Engineer -in- Charge . (Material shall confirm to ASTM 6063.)

Providing and fixing of expansion joint system related with wall joint

(internal/external) location as per drawings and direction of Engineer-In-

Charge. The joints shall be of extruded aluminum base members, self

aligning / centering arrangement and support plates as per ASTM B221-

02. The material shall be such that it provides an Expansion Joints

System suitable for vertical wall to wall/ wall to corner application, both

9 5.45 new and existing construction in office Buildings & complexes with no ₹ 0.00

slipping down tendency amongst the components of the Joint System.

The Joint System shall utilize light weight aluminum profiles exhibiting

minimal exposed aluminum surfaces mechanically snap locking the

multicellular to facilitate movement. (Material shall confirm to ASTM

Providing and fixing of expansion joint system of approved make and

manufactures for various roof locations as per approved drawings and

direction of Engineer-In-Charge. The joints shall be of extruded

aluminum base members with, self aligning and self centering

arragement support plates asper ASTM B221-02. The system shall be

10 5.46 such that it provides watertight roof to roof/roof to corner joint cover ₹ 0.00

expansion control system that is capable of accommodating

multidirectional seismic movement without stress to its components.

System shall consist of metal profile that incorporates a universal

aluminum base member designed to accommodate various project

conditions and roof treatments.

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

The cover plate shall be designed of width and thickness required to

satisfy movement and loading requirements and secured to base

members by utilizing manufacturer’s pre-engineered self-centering

arrangement that freely rotates / moves in all directions. The Self

centering arrangement shall exhibit circular sphere ends that lock and

slide inside the corresponding aluminum extrusion cavity to allow

freedom of movement and flexure in all directions including vertical ₹ 0.00

displacement. The Joint System shall resists damage or deterioration

from the impact of falling ice, exposure to UV, airborne contaminants

and occasional foot traffic from maintenance personnel. Provision of

Moisture Barrier Membrane in the Joint System to have water tight

joint is mandatory requirement. Material shall confirm to ASTM 6063.

TOTAL (Carried Over to Summary of Civil Works) ₹ 93,484,749.00 ₹ 0.00

D 6.0 BRICK WORK ₹ 0.00

Brick work with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in foundation and plinth in:

i 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 4.03 ₹ 7,132.25 ₹ 28,757.00

Providing and laying autoclaved aerated cement blocks masonry with

150mm/230mm/300 mm thick AAC blocks in super structure above

plinth level up to floor V level with RCC band at sill level and lintel level

2 6.47 with approved block laying polymer modified adhesive mortar all Cum 1468.43 ₹ 8,333.65 ₹ 12,237,374.00

complete as per direction of Engineer-in-Charge. (The payment of RCC

band and reinforcement shall be made for seperately).

Extra for brick work / AAC block masonry / Tile brick masonry in

3 6.5 superstructure above floor V level, for each four floors or part thereof Cum 40.01 ₹ 169.45 ₹ 6,779.00

by mechanical means.

Extra for half brick masonry in superstructure, above floor V level for

every four floors or part thereof by mechanical means.

Providing and laying autoclaved aerated cement blocks masonry with

100 mm thick AAC blocks in super structure above plinth level up to

5 6.38 floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate Cum 400.45 ₹ 10,195.45 ₹ 4,082,806.00

includes providing and placing in position 2 Nos 6 mm dia M.S. bars at

every third course of masonry work.

TOTAL (Carried Over to Summary of Civil Works) ₹ 16,355,785.00 ₹ 0.00

E 8.0 MARBLE & GRANITE WORK

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms, vanity

counters, window sills, facias and similar locations of required size,

approved shade, colour and texture laid over 20 mm thick base cement

mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,

mixed with matching pigment, epoxy touch ups, including rubbing,

curing, moulding and polishing to edges to give high gloss finish etc.

complete at all levels.

a) 8.2.2 Granite stone slab colour black, Cherry/Ruby red

Providing edge moulding to 18 mm thick marble stone counters,

Vanities etc., including machine polishing to edge to give high gloss

finish etc. complete as per design approved by Engineer-in-Charge.

Extra for providing opening of required size & shape for wash basins/

kitchen sink in kitchen platform, vanity counters and similar location in

3 8.5 marble/Granite/Stone work including necessary holes for pillar taps etc. Each 99.00 ₹ 978.70 ₹ 96,891.00

including rubbing and polishing of cut edge etc. complete.

Providing and fixing stone slab with table rubbed, edges rounded and

polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal

partitions by cutting a chase of appropriate width with chase cutter and

4 8.10 embedding the stone in the chase with epoxy grout or with cement ₹ 0.00

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6

mm nominal size) as per direction of Engineer-in-charge and finished

i 8.10.2 Granite Stone of approved shade Sqm 15.30 ₹ 4,051.85 ₹ 61,993.00

Providing and fixing machine cut, mirror/ eggshell polished, Granite

stone work for wall lining (veneer work) including dado, skirting, risers

of steps etc., in required design and pattern wherever required, stones

of different finished surface texture, on 12mm (average) thick cement

mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white

5 cement slurry @ 3.3 kg/sqm including pointing with white cement slurry Sqm 40.50 ₹ 8,393.10 ₹ 339,921.00

admixed with pigment of matching shade, including rubbing, curing,

polishing etc. all complete as per Architectural drawings, and as

directed by the Engineer-in-Charge. Granite of colour black,

cherry/ruby red 18-20mm thick (slab area above 0.50 sqm)

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

Providing and fixing Ist quality ceramic glazed wall tiles conforming to

IS: 15622 (thickness to be specified by the manufacturer), of approved

make, in all colours, shades except burgundy, bottle green, black of any

size as approved by Engineer-in-Charge, in skirting, risers of steps and

dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse

sand) and jointing with grey cement slurry @ 3.3kg per sqm, including

pointing in white cement mixed with pigment of matching shade

Designing, fabricating, testing, installing and fixing in position Curtain

Wall with Aluminium Composite Panel Cladding, with open grooves for

linear as well as curvilinear portions of the building , for all heights and

all levels etc. including: (a) Structural analysis & design and preparation

of shop drawings for pressure equalisation or rain screen principle as

required, proper drainage of water to make it watertight including

checking of all the structural and functional design. (b) Providing,

fabricating and supplying and fixing panels of aluminium composite

panel cladding in pan shape in metalic colour of approved shades made

out of 4mm thick aluminium composite panel material consisting of

3mm thick FR grade mineral core sandwiched between two Aluminium

sheets (each 0.5mm thick). The aluminium composite panel cladding

sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based

fluoropolymer resin coating of approved colour and shade on face # 1

and polymer (Service) coating on face # 2 as specified using stainless

steel screws, nuts, bolts, washers, cleats, weather silicone sealant,

backer rods etc.

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip

Galvanised with serrations and serrated washers to arrest the wind load

movement, fasteners, SS 316 Pins and anchor bolts of approved make in

SS 316, Nylon separators to prevent bi-metallic contacts all complete

required to perform as per specification and drawing The item includes

cost of all material & labour component, the cost of all mock ups at site,

cost of all samples of the individual components for testing in an

approved laboratory, field tests on the assembled working curtain wall

with aluminium composite panel cladding, cleaning and protection of

the curtain wall with aluminium composite panel cladding till the

i i handing over of the building for occupation. The Contractor shall Sqm. 50.00 ₹ 5,015.05 ₹ 250,753.00

provide curtain wall with aluminium composite panel cladding,and

including base frame work for ACP having all the performance

characteristics all complete , as per the Architectural drawings, as per

item description, as specified, as per the approved shop drawings and

as directed by the Engineer-in-Charge. However, for the purpose of

payment, only the actual area on the external face of the curtain wall

with Aluminum Composite Panel Cladding (including width of groove)

shall be measured in sqm. up to two decimal places.

TOTAL (Carried Over to Summary of Civil Works) ₹ 2,678,403.00 ₹ 339,921.00

F 9.0 WOOD & PVC WORK ₹ 0.00

Providing wood work in frames of doors, windows, clerestory windows

and other frames, wrought framed and fixed in position with hold fast

lugs or with dash fasteners of required dia & length ( hold fast lugs or

dash fastener shall be paid for separately).

i 9.1.1 Second class teak wood Cum 3.15 ₹ 142,949.70 ₹ 450,347.00

Providing and fixing ISI marked flush door shutters conforming to IS :

2202 (Part I) non-decorative type, core of block board construction with

2 9.21 frame of 1st class hard wood and well matched commercial 3 ply ₹ 0.00

veneering with vertical grains or cross bands and face veneers on both

faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm

3 9.23 minimum depth on all edges of flush door shutters (over all area of door Sqm 112.17 ₹ 462.35 ₹ 51,862.00

shutter to be measured).

Providing and fixing wooden moulded beading to door and window

4 9.40.1 frames with iron screws, plugs and priming coat on unexposed surface ₹ 0.00

etc. complete : 2nd class teak wood

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

Providing and fixing M.S. grills of required pattern in frames of windows

5 9.48 etc. with M.S. flats, square or round bars etc. including priming coat ₹ 0.00

with approved steel primer all complete.

i 9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. kg 6847.74 ₹ 238.35 ₹ 1,632,159.00

Providing and fixing curtain rods of 1.25 mm thick chromium plated

brass plate, with two chromium plated brass brackets fixed with C.P.

brass screws and wooden plugs, etc., wherever necessary complete :

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to

frame with 10 mm diameter bolts, nuts and wooden plugs and

7 9.53 embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : Each 978.00 ₹ 228.85 ₹ 223,815.00

3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing aluminium tower bolts ISI marked anodised (anodic

coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed

to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium pull bolt lock, ISI marked, anodised

(anodic coating not less than grade AC 10 as per IS : 1868) transparent

or dyed to required colour and shade, with necessary screws bolts, nut

and washers etc. complete.

Providing and fixing aluminium handles of approved make anodized

(anodic coating not less than grade AC 10 as per IS : 1868) transparent

or dyed to required colour or shade with necessry screws etc. complete.

Providing & Fixing decorative high pressure laminated sheet of plain /

wood grain in gloss / matt / suede finish with high density protective

14 9.127 surface layer and reverse side of adhesive bonding quality conforming ₹ 0.00

to IS : 2046 Type S, including cost of adhesive of approved quality.

Providing and fixing factory made uPVC door frame made of uPVC

extruded sections having an overall dimension as below (tolerance

±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door

frame to be Jointed with galvanized brackets and stainless steel screws,

15 9.117 joints mitred and Plastic welded. The hinge side vertical of the frames ₹ 0.00

reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1

mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame

complete as per manufacturer’s specification and direction of

Engineerin-charge

i 9.117.2 Extruded section profile size 42x50 mm Rmt 574.20 ₹ 331.35 ₹ 190,261.00

16 9.118 Providing and fixing to existing door frames. ₹ 0.00

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made

of styles and rails of a uPVC hollow section of size 60x30 mm and wall

thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on

one side. The styles and rails mitred and joint at the corners by means

of M.S. galvanised/ plastic brackets of size 75x220 mm having wall

thickness 1.0 mm and stainless steel screws. The styles of the shutter

reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1

mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a

uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall

thickness fixed to the shutter styles by means of plastic/ galvanised M.S.

'U' cleats. The shutter frame filled with a uPVC multi-chambered single

panel of size not less than 620 mm, having over all thickness of 20 mm

and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie

bar at two places by inserting horizontally 6 mm galvanised M.S. rod

and fastened with nuts and washers, complete as per manufacturer's

specification and direction of Engineer-in-charge.

Providing and fixing partition upto ceiling height consisting of G.I. frame

and required board, including providing and fixing of frame work made

of special section power pressed/ roll form G.I. sheet with zinc coating

of 120 gms/sqm(both side inclusive), consisting of floor and ceiling

channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick,

fixed to the floor and ceiling at the spacing of 610 mm centre to centre

with dash fastener of 12.5 mm dia meter 50 mm length or suitable

anchor fastener or metal screws with nylon plugs and the studs 48 mm

wide having one flange of 34 mm and other flange 36 mm and 0.50 mm

17 9.105 thick fixed vertically within flanges of floor and ceiling channel and ₹ 0.00

placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and

nuts, including fixing of studs along both ends of partition fixed flush to

wall with suitable anchor fastener or metal screws with nylon plugs at

spacing of 450 mm centre to centre, and fixing of boards to both side of

frame work by 25 mm long dry wall screws on studs, floor and ceiling

channels at the spacing of 300 mm centre to centre. The boards are to

be fixed to the frame work with joints staggered to avoid through

M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of

9.5 mm each) to be provided at the horizontal joints of two boards,

fixed to the studs using metal to metal flat head screws, including

jointing and finishing to a flush finish with recommended jointing

compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5

mm), joint finisher and two coats of primer suitable for board as per

manufacture’s specification and direction of engineer in charge all

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

75 mm overall thickness partition with 12.5 mm thick double skin fire

i 9.105.1 rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: Sqm 314.34 ₹ 2,131.10 ₹ 669,892.00

2095: part 3 (Board with BIS certification marks)

Providing and fixing factory made uPVC glazed/ wire mesh

windows/ doors comprising of lead free uPVC multichambered frame,

sash and mullion/ coupler (wherever required) extruded profiles having

minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and

2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any

shape, colour and design duly reinforced with galvanized mild steel

section made of required shape & size as per CPWD Specification, uPVC

extruded glazing beads, interlocks and Inline sash adaptor (whereever

required) of appropriate dimension, EPDM gasket, hardware, SS 304

grade fasteners of minimum 8 mm dia. with countersunk head,

comprising of matching polyamide PA6 grade sleeve for fixing frame to

18 9.147.a finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps ₹ 0.00

and necessary stainless steel screws etc. Profile of frame, sash &

mullion (if required) shall be mitred cut and fusion

welded/mechanically jointed duly sealed at all corners, including drilling

of holes for fixing hardware and drainage of water etc. After fixing

frame the gap between frame and adjacent finished wall shall be filled

with weather proof silicon sealant over backer rod of approved size and

quality, all complete as per approved drawing conforming to CPWD

specification & direction of Engineer-in-Charge. Section of steel

reinforcement and cross sections of uPVC profiles to be as per design

approved by Engineer-in-Charge.

Wire mesh/ Glazing of plain/ toughened/ laminated/ double glass unit

with/ without high performance coatings as per design requirements

and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:-

Structural design proof checked from a Government Engineering

Institute, to be provided by the manufacturer for : (iii) Sites with basic

wind speed > 45 m/sec as per IS 875 –Part 3 (iv) Sites with structure

height more than 20m for all wind speeds

Two and half track three panels sliding window with two glazed & one

a) 9.147.A3 wire mesh panels with Aluminium channel for roller track, wool pile, ₹ 0.00

nylon rollers with SS 304 body.

Using R3 series with frame (85mm & above) x (40mm & above) & glazed

sash (30mm & above) x (55mm & above) & fly screen sash (20mm &

i 9.147.A3.2 above) x (50mm & above) with zinc alloy (zamak) powder coated Sqm 33.25 ₹ 9,968.70 ₹ 331,464.00

handle on every glazed panel along with multi-point locking system.

(Height upto 1.8 meter).

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

Three track three panels sliding window with two glazed & one wire

b) 9.147.A4 mesh panels with Aluminium channel for roller track, wool pile, nylon ₹ 0.00

rollers with SS 304 body.

Using R4 series with frame (115mm & above) x (45mm & above) & both

glazed and fly screen sash (44mm & above) x (55mm & above) with zinc

alloy (zamak) powder coated touch locks with hook. (Height upto 1.8

c) 9.147.C1 Fixed window / ventilator without mullion / transom. ₹ 0.00

Using R1 series with frame (33mm & above ) x (35mm & above). (Height

upto 0.90 metre)

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid door/ window/ Ceosetory windows & other Frames/

Chowkhat comprising of virgin PVC polymer of K value 58-60

(Suspension Grade), calcium carbonate and natural fibers (wood

powder/ rice husk/ wheat husk) and non toxic additives (maximum

toxicity index of 12 for 100 gms) fabricated with miter joints after

applying PVC solvent cement and screwed with full body threaded star

headed SS screws having minimum frame density of 750 kg/cum, screw

withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum

compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2

and resistance to spread of flame of Class A category with property of

being termite/ borer proof, water/ moisture proof and fire retardant

and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of

required dia and length complete as per direction of Engineer-In-

(M.S hold fast/ lugs or SS dash fasteners shall be paid for separately).

Note: For WPC solid door/ window frames, minus 5mm tolerance in

dimensions i.e depth and width of profile shall be acceptable.

Variationin profile dimensions on plus side shall be acceptable but no

extra payment on this account shall be made.

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid decorative type flush door shutter of required size

comprising of virgin polymer of K value 58-60 (Suspension Grade),

calcium carbonate and natural fibers (wood powder/ rice husk/wheat

husk) and non toxic additives (maximum toxicity index of 12 for 100

gms) having minimum density of 650 kg/cum and screw withdrawal

strength of 1800 N (Face) & 900 N (Edge), minimum compressive

strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to

20 26.88 spread of flame of Class A category with property of being ₹ 0.00

termite/borer proof, water/moisture proof and fire retardant. WPC to

be laminated with PVC foil of minimum 14 microns thick of approved

design pasted with hot melt adhesive on both faces of shutter and fixing

with stainless steel butt hinges of required size with necessary full body

threaded star headed counter sunk S.S screws, all as per direction of

Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S

screws shall be paid separately)

Providing and fixing IS : 12817 marked stainless steel butt hinges with

stainless steel screws etc. complete :

SS Hardware ₹ 0.00

Providing and fixing bright /matt finished Stainless Steel handles of

22 9.165 approved quality & make with necessary screws etc all complete. ₹ 0.00

Providing and fixing Stainless Steel tower bolts of approved make with

necessary screws etc. complete :

Providing and fixing Stainless Steel hanging floor door stopper of

approved make with necessary screws etc. complete.

i i Single rubber stopper Each 275.00 ₹ 219.30 ₹ 60,308.00

Providing and fixing Concealed Door Closer With Track Arm (SS Finish),

Slide in SS Cover Stainless Steel door closer, door weight upto 80 kg and

25 MR-3 door width from 701 mm to 1000 mm), with double speed adjustment Each 275.00 ₹ 2,626.15 ₹ 722,191.00

with necessary accessories and screws etc. complete.

Providing and fixing of Mortise Lock with Handles Stainless Steel Finish

26 MR-4 (Solid Casted) with necessary screws etc. complete as per design & Each 158.00 ₹ 5,070.35 ₹ 801,115.00

approved by Engineer in Charge.

Providing and fixing stainless steel sliding door bolts, ISI marked

anodised (anodic coating not less than grade AC 10 as per IS : 1868),

transparent or dyed to required colour or shade, with nuts and screws

etc. complete : 300x16 mm

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

28 MR-6 Providing and fixing Stainless steel Al-drop Each 116.00 ₹ 363.80 ₹ 42,201.00

Providing and fixing fire resistant door frame of section 50 x 60 mm on

horizontal side & 35 x 60 mm on vertical sides having built in rebate

made out of 1.6 mm thick GI sheet ( Zinc coating not less than

120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door

Shutters. The frame shall be filled with Mineral wool Insulation having

density min 96Kg/m³ . The frame will have a provision of G.I. Anchor

fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size

M10 x 80 ) suitable for fixing in the opening along with Factory made

Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of

fire rated glazed shutter . The frame shall be finished with a approved

fire resistant primer or Powder coating of not less than 30 micron in

desired shade as per the directions of Engineer - in- charge . (Cost of SS

ball bearing hinges is excluded).

Providing and fixing 60 mm thick glazed fire resistant door shutters of

120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999,

tested and certified as per laboratory approved by Engineer-in-charge,

with suitable mounting on door frame, consisting of vertical styles, top

rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60mm

made out of 1.6mm thick G.I. sheet (zinc coating not less than

120gm/m²) duly filled mineral wool insulation having density min 96 kg/

m³ and fixing with necessary stainless steel ball bearing hinges of size

100x89x3mm of approved make, including applying a coat of approved

fire resistant primer or powder coating not less than 30 micron etc all

complete as per direction of Engineer-in-charge (panelling to be paid for

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

Providing and fixing glazing in fire resistant door shutters, fixed panels &

partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet

(zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with

M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm

c/c , including applying a coat of approved fire resistant primer/powder

coating of not less than 30 micron on G.I. beading, & special ceramic

tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS

16231 (Part 3):2016 and as per direction of Engineer-in-charge with

glass of required thickness having 120 minutes of fire resistance both

31 9.164 integrity & radiation control (EW120) and minimum 20 minutes of Sqm 11.88 ₹ 43,677.65 ₹ 518,890.00

insulation (EI20). The manufacturer have to give test

report/certification of fire glass and the glass should have the stamp

showing the value of E, EW & EI. The glass shall be tested in approved

NABL accredited lab or by any other accreditation body which operates

in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC

17025 for testing and calibration scopes shall be eligible. The maximum

glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm.

Providing and fixing panic bar / latch (Double point) fitted with a single

body, Trim Latch & Lock on back side of the Panic Latch of reputed

brand and manufacture to be approved by the Engineer- in- charge, all

Providing and fixing certified restroom cubicle system of approved

make comprising of green guard certified solid compact laminated

water proof board, minimum 18 mm thick made as per IS: 2046

(phenolic core board) and as per BS-476/97 for fire retardant for toilet

showers, water closet etc . The board shall be manufactured under high

pressure and temperature by impregnating kraft papers and outer

decorative papers with thermosetting phenolic/ melamine resins (low

VOC). The cubicle system shall be resistant towards water, chemical,

33 MR-7 scratch, impact and heat and shall be anti bacterial, colour fast and shall ₹ 0.00

have accessories like door knob, Gravity/ auto return hinges, privacy

thumb turn with occupancy indicator, coat Hook, etc all in SS 304. The

hardware and fixings includes anchoring of all fixed front panel to floor

with SS 316 L brackets/ base plates with a clearance height upto 110

mm, and covered with SS 316 Shoe box plates, wall and corner joineries

(brackets and channels) shall be SS 304 grade, SS 304 sr ISO/IEC 17025

for testing and calib

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

The cubicle unit shall be installed in approved finish, shades and colours

as per specifications and directions of Engineer-In-Charge, including

minimum 5 (five) years warranty against any moisture related damages

to all intermediate panels, doors, hardqwares etc. Standard dimension ₹ 0.00

of the cubicle system shall be of approx. 2100 mm Height(overall) x

1500mm Depth and 1200 mm Width which includes 600mm door size

I shaped Cubicle System consisting of front face panel including door

and all necessary accessories, fittings and hardware etc.

L shaped Cubicle System consisting of front face panel including door,

ii ii intermediate panel and all necessary accessories, fittings and hardware Each 72.00 ₹ 48,468.85 ₹ 3,489,757.00

TOTAL (Carried Over to Summary of Civil Works) ₹ 16,170,871.00 ₹ 6,413,816.00

G 10.0 STEEL WORK ₹ 0.00

Structural steel work riveted, bolted or welded in built up sections,

1 10.2 trusses and framed work, including cutting, hoisting, fixing in position Kg 250.00 ₹ 133.70 ₹ 33,425.00

and applying a priming coat of approved steel primer all complete.

Providing and fixing 1mm thick M.S. sheet door with frame of

40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions

2 10.5 and corners, all necessary fittings complete, including applying a ₹ 0.00

priming coat of approved steel primer.

i 10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces Sqm 5.04 ₹ 5,804.35 ₹ 29,254.00

Steel work in built up tubular ( round, square or rectangular hollow

tubes etc.) trusses etc., including cutting, hoisting, fixing in position and

4 10.16 applying a priming coat of approved steel primer, including welding and ₹ 0.00

bolted with special shaped washers etc. complete.

i 10.16.2 Hot finished seamless type tubes Kg 16849.00 ₹ 206.35 ₹ 3,476,791.00

5 10.20 Providing and fixing bolts including nuts and washers complete kg 842.45 ₹ 159.35 ₹ 134,244.00

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for

ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5

mm thick M.S. sheet with its top surface hacked for proper bonding, top

6 10.18 lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 each 200.00 ₹ 220.65 ₹ 44,130.00

mm dia round headed screws, one lock at the corners. Clamp shall be

made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Steel work welded in built up sections/ framed work including cutting,

7 10.25 hoisting, fixing in position and applying a priming coat of approved steel ₹ 0.00

primer using structural steel etc. as required

In stringers, treads, landings etc. of stair cases including use of

chequered plate wherever required, all complete.

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

In gratings, frames, guard bar, ladder, railings, brackets, gates and

Providing and fixing carbon steel galvanised ( minimum coating 5

micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield

strength 480 N/mm2), counter sunk head, comprising of 10 m dia

polyamide PA 6 grade sleeve, including drilling of hole in frame ,

concrete/ masonry, etc. as per direction of Engineer-in-charge.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing,

polishing and making curvature (wherever required) and fitting the

same with necessary stainless steel nuts and bolts complete, i/c fixing

the railing with necessary accessories & stainless steel dash fasteners ,

9 10.28 stainless steel bolts etc., of required size, on the top of the floor or the kg 3983.25 ₹ 772.40 ₹ 3,076,662.00

side of waist slab with suitable arrangement as per approval of Engineer-

in-charge, (for payment purpose only weight of stainless steel members

shall be considered excluding fixing accessories such as nuts, bolts,

fasteners etc.).

TOTAL (Carried Over to Summary of Civil Works) ₹ 7,646,207.00 ₹ 0.00

H 11.0 FLOORING WORK ₹ 0.00

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate) finished with a floating coat of neat cement, including

cement slurry, but excluding the cost of nosing of steps etc. complete.

i 11.3.1 40 mm thick with 20 mm nominal size stone aggregate Sqm 58.26 ₹ 614.20 ₹ 35,781.00

Chequerred precast cement concrete tiles 22 mm thick in footpath

&courtyard, jointed with neat cement slurry mixed with pigment to

2 11.20 match the shade of tiles, including rubbing and cleaning etc. complete, ₹ 0.00

on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).

i 11.20.1 Light shade pigment using white cement. Sqm 25.00 ₹ 1,402.00 ₹ 35,050.00

Kota stone slab flooring over 20 mm (average) thick base laid over and

jointed with grey cement slurry mixed with pigment to match the shade

3 11.26 of the slab including rubbing and polishing complete with base of ₹ 0.00

cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars

laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse

4 11.27 sand) and jointed with grey cement slurry mixed with pigment to match Sqm 24.17 ₹ 2,354.70 ₹ 56,904.00

the shade of the slabs, including rubbing and polishing complete.

Extra for pre finished nosing to treads of steps of marble / granite stone.

Extra for marble / granite stone flooring in treads of steps and risers

using single length up to 2.00 metre.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm

(thickness to be specified by the manufacturer), of 1st quality

conforming to IS : 15622, of approved make, in all colours, shades,

except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of

cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey

cement slurry @ 3.3 kg/ sq.m including pointing the joints with white

cement and matching pigments etc., complete.

Providing & Laying vitrified floor tiles in different sizes ( thickness to be

specified by the manufacturer) with water absorption's less than 0.08%

and confirming to IS : 15622 of approved make in all colours and

shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse

sand) including grouting the joints with white cement and matching

pigments etc, complete.

Providing and laying Vitrified tiles in different sizes (thickness to be

specified by manufacturer), with water absorption less than 0.08 % and

conforming to I.S. 15622, of approved make, in all colours & shade, in

11 11.46 skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 ₹ 0.00

cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm

including grouting the joint with white cement & matching pigments

Providing and laying Polished Granite stone flooring in required design

and patterns, in linear as well as curvilinear portions of the building all

complete as per the architectural drawings with 18 mm thick stone slab

over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4

12 11.56 coarse sand) laid and jointed with cement slurry and pointing with ₹ 0.00

white cement slurry admixed with pigment of matching shade including

rubbing, curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge.

Polished Granite stone slab colour of Black, Cherry/Ruby Red or

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

Providing and laying Laminate wooden

flooring (Grade AC6 or AC6+ laminates) 6 mm to 12 mm thick, having a

good backing layer made up of plastic laminate or melamine, core

made up of medium-density fibreboard (MDF),which is less resistant to

impact damage and less resistant to being dented by heavy furniture,

having a décor layer to give each floor its appearance and consisting of

13 MR-8 one or more sheets of paper impregnated with melamine resin and Sqm 61.00 ₹ 2,619.50 ₹ 159,792.00

top wear layer having clear aluminium oxide finish that protects

the decorative layer & imparts the desired level of sheen, from full

gloss to low gloss, duly fixed to the base floor using adhesive as

approved by the manufacturer.

Providing and fixing Engineered Wooden finish flooring designed to be

installed as a floating floor not nailed or glued to the subfloor. planks

are fastened together utilizing unique tongues and grooves to create a

durable, easy-to-maintain floor surface. 1⁄4" be left around the floor’s

perimeter shall be left as expansion space.before installing a sound

underlayment and/or 6-mil(.15mm) non-recycled (100% virgin) resin

polyethylene film as a moisture barrier beneath the wooden floor.

Providing & fixing High Definition Chromo- Jet printed carpet tufted,

1/10 gauge, 100% type 6 nylon cut pile roll type carpet, which is

suitable & recommended to be used in an Auditorium application.. It

should have a standard length & width of 25m and 3.66m or4m

respectively. The carpet should have a minimum pile height of 6mm,

with a total height of 8mm, and it should also have a minimum pile

13 MR-10 weight of 800g/m² and a minimum total weight of 1810 g/m², to ensure Sqm 310.04 ₹ 3,267.60 ₹ 1,013,070.00

adequate quality for the said usage. The carpet should ensure good

density to perform under heavy traffic usage. Primary backing should be

P.P. woven cloth and action back second backing. The carpet must

have green label CRI+PLUS—GLP 1350. The color fastness standard of

minimum 4 or more for rubbing (wet or dry), water or light. Equivalent

to CCIL carpet.

TOTAL (Carried Over to Summary of Civil Works) ₹ 19,856,780.00 ₹ 1,448,827.00

I 12.0 ROOFING ₹ 0.00

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse

sand : 4 stone aggregate 10 mm and down gauge), including finishing

with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

In 75x75 mm deep chase

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

Making khurras 45x45 cm with average minimum thickness of 5 cm

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400

micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse

sand) and a coat of neat cement, rounding the edges and making and

finishing the outlet complete.

Providing and fixing false ceiling at all height including providing and

fixing of frame work made of special sections, power pressed from M.S.

sheets and galvanized with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm

wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm

centre to centre, one flange fixed to the ceiling with dash fastener 12.5

mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to

the angle hangers of 25x10x0.50 mm of required length with nuts &

bolts of required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the spacing of

3 12.45 1200 mm centre to centre, to which the ceiling section 0.5 mm thick ₹ 0.00

bottom wedge of 80 mm with tapered flanges of 26 mm each having

lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with connecting clips made

out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including

fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20

mm and 30 mm long, the perimeter of ceiling fixed to wall/partition

with the help of rawl plugs at 450 mm centre, with 25mm long dry wall

screws @ 230 mm interval,

including fixing of gypsum board to ceiling section and perimeter

channel with the help of dry wall screws of size 3.5 x 25 mm edges of

the board with recommended jointing compound , jointing tapes ,

finishing with jointing compound in 3 layers covering upto 150 mm on

both sides of joint and two coats of primer suitable for board, all as per

manufacturer's specification and also including the cost of making

openings for light fittings, grills, diffusers, cutouts made with frame of

perimeter channels suitably fixed, all complete as per drawings,

specification and direction of the Engineer in Charge but excluding the

cost of painting with : at 230 mm c/c, including jointing and finishing to

a flush finish of tapered and square

i 12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board. Sqm 1853.80 ₹ 1,529.10 ₹ 2,834,645.00

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

Supply of 80/115 mm PUF insulated thick roof panel with 0.5 mm PGPI

sheet both sides in 40+_2 kg/m3 density. The PU panel shall be CFC free

and Zero Ozone depleting panel made out of continous line running on

uninterrupted power supply.Panel shall have pre coated GI sheet on

both side of Polyurethane Foam confirming to IS 12436:1988. The pre

coated sheet shall be of minimum 240 Mpa steel grade confirming to

4 MR-11 IS:277:1992, 5_7 microns epoxy primer on both sides of the sheet and Sqm 481.40 ₹ 2,838.00 ₹ 1,366,213.00

polyester top coat 15_18 micron. The PPGL sheet shall have plastic

protective gaurd film of minimum 25 Microns to avoid scratches during

transportation. The panels shall be vertically joined together by tongue

and groove joints. The PU Foam shall be self extinguishing having

standard density of 40 kg/m3 with thermal conductivity K value

Providing and fixing tiled false ceiling of specified materials of size

595x595 mm in true horizontal level, suspended on inter locking metal

grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/

sqm, both side inclusive) consisting of main "T" runner with suitably

spaced joints to get required length and of size 24x38 mm made from

0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center

and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum)

sheet, 1200 mm long spaced between main "T" at 600 mm center to

center to form a grid of 1200x600 mm and secondary cross "T" of length

600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to

be interlocked at middle of the 1200x600 mm panel to form grids of

600x600 mm and wall angle of size 24x24x0.3 mm and laying false

ceiling tiles of approved texture in the grid including, required

cutting/making, opening for services like diffusers, grills, light fittings,

fixtures, smoke detectors etc. Main "T" runners to be suspended from

ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to

ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI

adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8

mm spaced at 1200 mm center to center along main T, bottom exposed

width of 24 mm of all T-sections shall be pre-painted with polyester

paint, all complete for all heights as per specifications, drawings and as

directed by Engineer-in-charge.

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles

of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI

sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20%

perforation area with 1.8 mm dia holes and having NRC (Noise

Reduction Coefficient ) of 0.5, electro statically polyester powder

coated of thickness 60 microns (minimum), including factory painted

after bending and perforation, and backed with a black Glass fiber

acoustical fleece.

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300mm x 20

mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and

initial emittance > 0.75 on waterproof and sloped surface of terrace,

laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4

6 12.55 coarse sand) and grouting the joints with mix of white cement & marble Sq.Mt. 1731.28 ₹ 1,703.95 ₹ 2,950,015.00

powder in ratio of 1:1, including rubbing and polishing of the surface

upto 3 cuts complete, including providing skirting upto 150 mm height

along the parapet walls in the same manner.

Acostical False Ceiling ₹ 0.00

Providing & Fixing of BOLLARD PHONIC SOFT FIBRE Ceiling Tiles With

15mm GRID. The tiles should have NRC 0.9, Light Reflectance ≥88%,

Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, in module

size of 600 x 600 x 15mm. The tile shall be installed with 15*35(web

hight) wide T - section flanges colour white having rotary stitching on all

T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a

web height of 35mm and need to be installed with Suspension system

of manufacturer. The Tile & Grid system used together should carry a 10

year warranty.INSTALLATION: The grid should be of “BOLLARD” make

with 15mm wide T - section flanges color white. The main T runner with

7 MR-12 length and size of 15X38mm made from .30mm thick sheet spaced at ₹ 0.00

1200mm Centre to Centre and cross T of size 15X38mm made of .3mm

thick of 1200mm long spaced between main T at 600mm center to

centre to form a grid of 1200X600mm and second cross T of length

600mm and size 15X38mm made of 0.30mm sheet to be interlocked at

middle of the 1200X600 mm panel to form grid of 600X600mm and wall

angle of size 19X19 Installation should be carried out as per Bollard

recommended procedure. The grid frame should be suspended from

ceiling using M-6 fastener, L Cleat, 4mm GI wire with Stainless steel

level adjustible clip which will be attached to Main Runner at spaced of

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

INSTALLATION: To comprise main runner spaced at 1200mm centres

securely fixed to the structural soffit using Armstrong suspension

system (specifications below) at 1200mm maximum centre. The

First/Last Armstrong suspension system at the end of each main runner

should not be greater than 450mm from the adjacent wall. The

orientation of the first tile should be such that the tegular edge side of

the plank should be placed on the wall angle and the flange of the

1200mm long special cross tees to be inserted in the grooved edge side

of the plank. The groove will occupy only half of the T section but would

cover the face of the flange. On the other half of the T section the

tegular edge of the subsequent plank would rest and the special cross

tee would be placed in grooved edge and this would be repeated thus

forming a semi concealed system. A stabilizer bar of 1200 mm to be

placed on the bulb of the main

Providing and Fixing 15 mm thick densified tegular edged eco friendly

light weight calcium silicate false ceiling tiles of approved texture of size

595 x 595 mm in true horizontal level, suspended on inter locking metal

grid of hot dipped galvanised steel sections (galvanising @ 120 grams

per sqm including both side) consisting of main ‘T’ runner suitably

spaced at joints to get required length and of size 24x38 mm made from

0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and

cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet,

1200 mm long spaced between main’T’ at 600 mm centre to centre to

form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm

and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter

locked at middle of the 1200x 600 mm panel to from grid of size

8 12.53 600x600 mm, resting on periphery walls /partitions on a Perimeter wall Sq.Mt. 10.00 ₹ 2,158.15 ₹ 21,582.00

angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick

(minimum) sheet with the help of rawl plugs at 450 mm centre to

centre with 25 mm long dry wall screws @ 230 mm interval and laying

15 mm thick densified edges calicum silicate ceiling tiles of approved

texture in the grid, including, cutting/ making opening for services like

diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever

required. Main ‘T’ runners to be suspended from ceiling using G.I.

slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia

and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with

galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm

centre to centre along main ‘T’, bottom exposed with 24 mm of all

Tsections shall be pre-painted with polyster baked paint, for all heights,

as per specifications, drawings and as directed by Engineer-in-Charge.

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

Providing and Fixing of 16mm Thick sky lights consisting of Multi

cell/tight cell Polycarbonate Panel System of approved colour, 16 mm

thick (minimum) having uniform in color with an integral Tight-Cell core

constructed not to exceed 4mmx4mm in a cross section, Vertical

Standing Seam manufactured at both sides of the panel. Snap-on

connector to interlock the panels shall have a grip-lock double tooth

locking mechanism to ensure maximum uplift capability and shall be of

9 MR-13 same color as that of panel. Panel shall be factory sealed/end welded Sq.Mt. 10.00 ₹ 2,780.00 ₹ 27,800.00

panels with additional End-cap/Aluminium U-Profile (mill finish) for

ends. Panel shall be co-extruded with special anti glare compound and

UV protected. The full system shall be fitted on MS purlins

perpendicular to direction of sheeting with purlin spacing as specified

by Manufacturer. The rate includes cost of all the operations, labour

and all materials and tests (as applicable) involved such as bolts nuts

and screws etc. and labour for cutting bending to required profile,

Providing and fixing stretch ceiling at all heights and levels and of any

shape including wall coveing wherever shown on dawing as pe detailed

specifications: Detailed Description Features: System comprises of two

components - A perimeter track and lightweight fabric membrane.

Ceiling manufactured from roll material bespoke to ceilings height and

shape. it shall have povision of multiple ceiling removal and re-

installation for access. it shall include Incorporatiing of all types of light

10 MR-14 fixtures, grilles and fixing points including Transmittance for Light Sq.Mt. 10.00 ₹ 16,768.00 ₹ 167,680.00

Diffusion, Backlighting (LED) and projection. System shall be entirely

waterproof, washable. membane shall be 0.2mm thick PVC (Polyvinyl

Chloride) based membrane and shall be connected through Membranes

by Micro-Seams (Factory Welded). Semi-Concealed Perimeter Track

Matt White/Black PVC mateial fo fixing or Anodised Aluminium as per

Acostical Wall Paneling ₹ 0.00

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

Providing and Fixing of Channeled Woodworks perforated panels

Custom Perforated of width 192mm, thickness of 17mm and length

2440 mm , made of a HDHMR FR Grade board with minimum 860

Kg/M3 density substrate with a laminated facing as per the approved

shade & finish (Khaya Mahagony/Fusion Mapple/ Bavarian Beech) and

a melamine balancing layer on the reverse side. The boards shall have a

special perforation pattern of 3mm width Custom Perforaton of visible

panel each. The edges of the panels shall be “tongue-and-grooved” to

receive special clips for installation. The back of the perforated panel

shall have sound absorbing non-woven acoustical fleece having NRC of

11 MR-15 0.60. The panels shall be mounted on special aluminium splines (keel) Sq.Mt. 351.21 ₹ 5,326.40 ₹ 1,870,685.00

using clips provided by manufacturer.INSTALLATION: Screw the

aluminium extruded keel for channelled woodworks provided by

manufacturer over the solid wall/ surface an on-centre distance of

600mm. Place the inside clip on the groove end of the panel along the

Al keel and then place the tongue end of the next panel. Continue

installing rows of panels by inserting the tongue into the groove of the

earlier inserted panel and progressively installing inside clips into the

next keel till the actual height is achieved. Installation to be carried out

by Trained Installation team & Installation should be carried out as per

manufacturer recommended procedure.

TOTAL (Carried Over to Summary of Civil Works) ₹ 7,242,808.00 ₹ 5,235,009.00

J 13.0 FINISHING WORK

1 13.4 12 mm cement plaster of mix :

15 mm cement plaster on rough side of single or half brick wall of mix :

3 13.6 20 mm cement plaster of mix : ₹ 0.00

4 13.16 6 mm cement plaster of mix : ₹ 0.00

Extra for providing and mixing water proofing material in cement per bag of 50KG

5 13.21 plaster work in proportion recommended by the manufacturers. Cement Used in 3863.30 ₹ 22.10 ₹ 85,379.00

Extra for plastering exterior walls of height more than 10 m from

ground level for every additional height of 3 m or part thereof.

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

Providing and applying plaster of paris putty of 2 mm thickness over

7 13.26 plastered surface to prepare the surface even and smooth complete. Sqm 5281.53 ₹ 262.70 ₹ 1,387,457.00

Distempering with 1st quality acrylic distemper, having VOC (Volatile

Organic Compound ) content less than 50 grams/ litre, of approved

brand and manufacture, including applying additional coats wherever

required, to achieve even shade and colour.

New work (two or more coats) over and including water

i 13.41.1 thinnable priming coat with cement primer having VOC content Sqm 7135.33 ₹ 185.65 ₹ 1,324,674.00

less than 50 gram/litre

Applying one coat of water thinnable cement primer of approved brand

and manufacture on wall surface :

With water thinnable cement primer on wall surface having

VOC content less than 50 grams/litre

Wall painting with acrylic emulsion paint of approved brand and

manufacture to give an even shade :

i 13.82.2 Two or more coats on new work Sqm 12427.01 ₹ 137.45 ₹ 1,708,093.00

Finishing walls with water proofing cement paint of required shade :

i 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm) Sqm 50.00 ₹ 116.90 ₹ 5,845.00

13 13.45 Finishing walls with textured exterior paint of required shade : ₹ 0.00

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and

i 13.45.1 including priming coat of exterior primer applied @ 2.20kg/10 sqm Sqm 1840.38 ₹ 223.60 ₹ 411,508.00

Finishing exterior walls with Ceramic textured finish with protection

coating by Texture Paints Natural - Ceramic/ Stony of approved shade

or approved equivalent make) to external wall surfaces comprising of

water-borne, penetrating, water repellent EM- primer & super durable

water based acrylic silicon resin clear and super durable dirt and dust

resistant protection coat of FSI Clear coat, which shall be highly water

repellant, Anti-algae & anti-fungal in nature. The coating shall also

cover hairline cracks with application method which includes 2 coats of

14 MR-16 E M Primer, 2 coats (Silmultaneouly) of 100% natural Ceramic & granite Sqm 2605.00 ₹ 2,831.00 ₹ 7,374,755.00

crushed stone , all in approved colour and texture including preparation

of surface, appropriate primer coat etc. applied as per manufacturer's

instructions complete & project consultant instructions, allow for

scaffolding, staging as required. The finish shall be natural colour/ non

pigmented, water repellant, resistant to condensate formation, cover

hairline cracks/ crazing, UV & alkali resistant & ensure good

breathability for the substrate all to complete as per direction of

Engineer-in-charge.

Finishing walls with Multi surface paint system for interiors and

15 13.48 exteriors using Primer as per manufacturers specifications : ₹ 0.00

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

Painting wood work with Multi Surface Paint of required shade. Two or

more coat applied @0.90 ltr/10 sqm over an under coat of primer

applied @0.75 ltr/ 10 sqm of approved brand or manufacture

Applying priming coat : Applying priming coats with primer of approved

16 13.85 brand and manufacture, ₹ 0.00

having low VOC (Volatile Organic Compound ) content.

With ready mixed pink or Grey primer of approved brand and

manufacture on wood work (hard and soft wood)

With ready mixed red oxide zinc chromate primer of approved brand

and manufacture on steel galvanised iron/ steel works

Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade :

i 13.62.1 Two or more coats on new work Sqm 2929.91 ₹ 226.25 ₹ 662,892.00

Add for plaster drip course/ groove in plastered surface or moulding to

R.C.C. projections.

Providing and applying white cement based putty of average thickness

1 mm, of approved brand and manufacturer, over the plastered wall

surface to prepare the surface even and smooth complete

(Providing and fixing Glass Reinforced Concrete (G.R.C) Jali in approved

size, pattern, design, thickness and color. The Screens should be made

from ‘53 grade’White Portland Cement manufactured by ‘JK Cement’ or

equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber

manufactured by ‘Saint Gobain’ or equivalent, Super Plasticizers

manufactured by ‘BASF’ or equivalent, Polymers manufactured by

20 MR-17 ‘BASF’ or equivalent and U.V resistant Synthetic inorganic pigments Sqm 374.22 ₹ 6,208.00 ₹ 2,323,158.00

should be used for pigmentation manufactured by ‘BAYFERROX

(Germany)’ or equivalent. The material casting should take place in

Synthetic Rubber / FRP Mould manufactured by ‘Reckli’ or equivalent.

The fixing of Jali should be ‘Dry fixing’ i.e. to be done with MS/SS ‘L’

shaped Clamps, dash fasteners and pins etc as per site requirment.)

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

Supply and Installation of 6mm thick FR Grade Aluminium Composite

HPL Composite Panel Cladding of approved color, made out of 5.5mm

thick FR grade mineral core sandwiched between two aluminium sheets

(each 0.25mm thick). The Aluminium HPL Composite Panel Cladding

shall be coil coated with High Durable resin coating of approved colour

with 10 years exterior warranty and shade on face #1 and polymer

(service) coating on face #2. Installation of panels will be done by MBE

Rivets (with Fixed and Sliding Points) with recommended Aluminum T

section of 75x37x2.8 mm thick and L section 38x38x2.8mm thick held by

Aluminum Wall Bracket with Wind load and Dead load slot, anchored

by standard anchor fasteners along with Thermal Separator. Installation

of Panels will be done using Rear Ventilated Principles only, which is

ensured by providing ventilation gap minimum 200 cm2/ per Meter (for

free flow of air behind the façade) for the façade and using the

framework with no horizontal section. (for all levels and all height e

tongue end of the next panel. Cont

TOTAL (Carried Over to Summary of Civil Works) ₹ 20,100,136.00 ₹ 10,264,774.00

M 21.0 ALUMINIUM & STRUCTURAL GLAZING WORK

Providing and fixing aluminium work for doors, windows, ventilators

and partitions with extruded built up standard tubular

sections/appropriate Z sections and other sections of approved make

conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or

with fixing clips, or with expansion hold fasteners including necessary

filling up of gaps at junctions, at top, bottom and sides with required

PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free,

straight, mitred and jointed echanically wherever required including

cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass /

stainless steel screws, all complete as per architectural drawings and

the directions of Engineer-in-charge. Glazing and paneling to be paid

for separately) :

a) 21.1.1 For fixed portion.

Powder coated aluminium (minimum thickness of powder coating 50

For shutters of doors, windows & ventilators including providing and

fixing hinges/ pivots and making provision for fixing of fittings wherever

required including the cost of EPDM rubber / neoprene gasket required

(Fittings shall be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

Providing and fixing 12 mm thick prelaminated particle board flat

pressed three layer or graded wood particle board conforming to IS:

12823 Grade l Type ll, in panelling fixed in aluminum doors, windows

shutters and partition frames with C.P. brass / stainless steel screws etc.

complete as per architectural drawings and directions of engineerin-

Pre-laminated particle board with decorative lamination on both sides

Providing and fixing glazing in aluminium door, window, ventilator

shutters and partitions etc. with EPDM rubber / neoprene gasket etc.

3 21.3 complete as per the architectural drawings and the directions of ₹ 0.00

engineer-in-charge . (Cost of aluminium snap beading shall be paid in

With float glass panes of 5 mm thickness (weight not less than 12.50

With float glass panes of 8 mm thickness (weight not less than 20

Filling the gap in between aluminium frame and adjacent

RCC/Brickwork/ Stone Work by providing weather silicon sealant over

backer rod of approved quality as per architectural drawings and

direction of Engineer-in-charge

i 21.8.1 Upto 5mm depth and 5mm width metre 2094.14 ₹ 96.75 ₹ 202,608.00

Providing and supplying aluminium extruded tubular and other

aluminium sections as per the architectural drawings and approved

shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per

BS 1474,including super durable powder coating of 60-80 microns

conforming to AAMA 2604 of required colour and shade as approved by

5 25.1 the Engineer-in-Charge. ( The item includes cost of material such as kg 1094.00 ₹ 414.30 ₹ 453,244.00

cleats, sleeves, screws etc. necessary for fabrication of extruded

aluminium frame work. Nothing extra shall be paid on this account).

The weight of aluminium extruded section shall be taken for purpose of

Designing, fabricating, testing, protection, installing and fixing in

position semi (grid) unitized system of structural/ curtain wall glazing

(with open joints) for linear as well as curvilinear portions of the

building for all heights and all levels, including :

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

a) Structural analysis & design and preparation of shop drawings for the

specified design loads conforming to IS 875 part III (the system must

passed the proof test at 1.5 times design wind pressure without any

failure), including functional design of the aluminum sections for fixing

glazing panels of various thicknesses, aluminium cleats, sleeves and

splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., ₹ 0.00

structural and weather silicone sealants, flashings, fire stop (barrier)-

cum-smoke seals, microwave cured EPDM gaskets for water tightness,

pressure equalization & drainage and protection against fire hazard

b) Fabricating and supplying serrated M.S. hot dip galvanized /

Aluminium alloy of 6005 T5 brackets of required sizes, sections and

profiles etc. to accommodate 3 Dimensional movement for achieving

perfect verticality and fixing structural glazing system rigidly to the RCC/

masonry/structural steel framework of building structure using stainless ₹ 0.00

steel anchor fasteners/ bolts, nylon separator to prevent bimetallic

contacts with nuts and washers etc. of stainless steel grade 316, of the

required capacity and in required numbers..

c) Providing and filling, two part pump filled, structural silicone sealant

and one part weather silicone sealant compatible with the structural

silicone sealant of required bite size in a clean and controlled factory /

work shop environment , including double sided spacer tape, setting ₹ 0.00

blocks and backer rod, all of approved grade, brand and manufacture,

as per the approved sealant design, within and all around the perimeter

for holding glass

d) Providing and fixing in position flashings of solid aluminium sheet 1

mm thick and of sizes, shapes and profiles, as required as per the site

conditions, to seal the gap between the building structure and all its ₹ 0.00

interfaces with curtain glazing to make it watertight.

e) Making provision for drainage of moisture/ water that enters the

curtain glazing system to make it watertight, by incorporating principles

of pressure equalization, providing suitable gutter profiles at bottom (if

required), making necessary holes of required sizes and of required

numbers etc. complete. This item includes cost of all inputs of

designing, labour for fabricating and installation of aluminium grid,

installation of glazed units, T&P, scaffolding and other incidental ₹ 0.00

charges including wastages etc., enabling temporary structures and

services, cranes or cradles etc. as described above and as specified. The

item includes the cost of getting all the structural and functional design

including shop drawings checked by a structural designer, dully

approved by Engineer-in-charge.

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

The item also includes the cost of all mock ups at site, cost of all

samples of the individual components for testing in an approved

laboratory, field tests on the assembled working structural glazing as

specified, cleaning and protection till the handing over of the building

for occupation. In the end, the Contractor shall provide a water tight

structural glazing having all the performance characteristics etc. all

complete as required, as per the Architectural drawings, as per item

description, as specified, as per the approved shop drawings and as

directed by the Engineer in-Charge.

Note:- 1. The cost of providing extruded aluminium frames, shadow

boxes, extruded aluminium section capping for fixing in the grooves of

the curtain glazing and vermin proof stainless steel wire mesh shall be

paid for separately under relevant items under this subhead. However,

for the purpose of payment, only the actual area of structural/ curtain

wall glazing (including width of grooves ) on the external face shall be

measured in sqm. up to two decimal places.

Providing, assembling and supplying vision glass panels (IGUs)

comprising of hermetically-sealed 6-12- 6 mm insulated glass (double

glazed) vision panel units of size and shape as required and specified,

comprising of an outer heat strengthened (as approved) glass 6mm

thick, of approved colour and shade with reflective soft coating on

surface # 2 of approved colour and shade, an inner heat strengthened

(as approved) clear float glass 6mm thick, spacer tube 12mm wide,

desiccants, including primary seal and secondary seal (structural silicone

sealant) etc. all complete for the required performances, as per the

Architectural drawings, as per the approved shop drawings, as specified

and as directed by the Engineer-in-Charge. The IGUs shall be assembled

in the factory/ workshop of the glass processor. (Payment for fixing of

IGU Panels in the curtain glazing is included in cost of item No.1.8.16

above). For payment, only the actual area of glass on face # 1 of the

glass panels (excluding the areas of the grooves and weather silicone

sealant) provided and fixed in position, shall be measured in sqm. (To

be fixed on extruded aluminium sections. and cost of aluminium

sections to be paid in relevant item)

(i) Coloured tinted float glass 6mm thick Heat Strengthened substrate

with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat

Strengthened clear Glass of approved make having properties as visible

i i Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to Sqm 59.40 ₹ 3,718.70 ₹ 220,891.00

15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28)

and U value of 3.0 to 3.3 W/m2 degree K etc.

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

Extra for openable side / top hung vision glass panels (IGUs/laminated

glass) including providing and supplying at site all accessories and

hardware for the openable panels as specified and of the approved

make such as heavy duty stainless steel friction hinges, min 4 -point

cremone locking sets with stainless steel plates, handles, buffers etc.

including necessary stainless steel screws/ fasteners, nuts, bolts,

washers etc. all complete as per the Architectural drawings, as per the

approved shop drawings, as specified and as directed by the Engineer in-

Providing and fixing 12 mm thick frameless toughened glass door

shutter of approved brand and manufacture, including providing and

fixing top & bottom pivot & double acting hydraulic floor spring type

9 21.18 fixing arrangement and making necessary holes etc. for fixing required Sqm 136.32 ₹ 5,325.90 ₹ 726,027.00

door fittings, all complete as per direction of Engineer-in-charge (Door

handle, lock and stopper etc.to be paid separately).

Providing and fixing Pull Handle back to Back Approved makes of Fixing

10 MR-19 25mm dia x300mm c/c, SS Matt with necessary screws etc. complete as Each 114.00 ₹ 2,616.05 ₹ 298,230.00

per direction of Engineer-in-Charge.

Providing and fixing Corner Patch Lock With Cylinder Approved makes,

11 MR-20 SS Matt with necessary screws etc. complete as per direction of Each 57.00 ₹ 3,899.50 ₹ 222,272.00

Engineer-in-Charge.

Providing and fixing 12mm thk. Toughened float glass glazing cut and

fixed in openings of desired shape as per drawing with 3/4" beveling all

around, fixed with the help of SS patch fittings, with top and bottom 'C'

12 MR-21 channels, fixed firmly to the slab/ MS Structure ,as directed by Engineer Sqm 629.19 ₹ 5,804.95 ₹ 3,652,428.00

in Charge. Area of openings to be measured). Assume frameless glass.

Rate of above item to include P/F of : 20x20mm "C" channel SS patch

Aluminium Louver ₹ 0.00

Supply and installation of Exterior Aluminium Vertical Louvers ARF200

Vertical Fin System, in different sizes as per drawing. Louvers to be

made with Aluminium Box Tube sections and covered with Solid

Aluminium Sheet pre-coated on a continuous reverse roller colour

coating line with high durable paint in approved colour. The top coated

surface shall be pre coated. Post painting by way of powder coating or

11 MR-22 spray coating is not allowed. Colour consistency with pre coating is Rmt. 75.00 ₹ 13,892.00 ₹ 1,041,900.00

desired. Welding is not acceptable. Blades to be mechanically secured

to allow for replacement in case of damage. Fasteners to be hex head.

All the fasteners should be mechanically fastened. Louvers must be

factory fabricated and finished so that only assembly / installation will

be done at the site.

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Sl. No. DSR-2023 DESCRIPTION UNIT Admin, Qty. RATE DSR Amount NDSR Amount

TOTAL (Carried Over to Summary of Civil Works) ₹ 3,757,904.00 ₹ 5,214,830.00

N 22.0 WATER PROOFING

Providing and laying water proofing treatment to vertical and horizontal

1 22.3 surfaces of depressed portions of W.C., kitchen and the like consisting

(i) Ist course of applying cement slurry @ 4.4 Kg/Sqm mixed with water

proofing compound conforming to IS 2645 in recommended

proportions including rounding off junction of vertical and horizontal

surface. (ii) IInd course of 20mm cement plaster 1:3 (1 cement : 3

coarse sand) mixed with water proofing compound in recommended

proportion including rounding off junction of vertical and horizontal sqm 459.73 ₹ 769.60 ₹ 353,810.00

surface. (iii) IIIrd course of applying blown or residual bitumen applied

hot at 1.7 Kg. per Sqm of area. (iv) IVth course of 400 micron thick PVC

sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and

pasted to each other with bitumen @ 1.7 Kg/Sqm.)

TOTAL (Carried Over to Summary of Civil Works) ₹ 353,810.00 ₹ 0.00

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Name of Project: Development of Administrative-cum-Academic Block for the College of Horticulture at Morena

(M.P.), under RLBCAU.

BUILDING NAME : ADMIN CUM ACDEMIC BLOCK

ELECTRICAL WORKS (AS PER DSR 2025)

S.NO NAME OF SUB-HEAD

DSR 2025 items Non Scheduled items

1 SUBHEAD- I: DISTRIBUTION BOARD ₹ 721,815.00 ₹ 0.00

2 SUB-HEAD - II : INTERNAL WIRING ₹ 14,921,160.00 ₹ 0.00

3 SUB-HEAD III - FANS & LIGHT FIXTURES: ₹ 2,167,989.00 ₹ 371,029.63

4 SUB HEAD - IV : LIGHTNING PROTECTION SYSTEM ₹ 413,490.00 ₹ 0.00

6 SUB HEAD -VI : RACEWAY AND CABLE TRAY ₹ 677,170.00 ₹ 1,567,250.23

7 SUB HEAD-VII : LIFT ₹ 3,368,451.44 ₹ 0.00

8 SUB HEAD-VIII :SOLAR DSR-2019 ₹ 2,171,200.00 ₹ 0.00

9 SUB HEAD-IX :Panels ₹ 0.00 ₹ 2,918,523.83

10 SUB HEAD-X :Earthing ₹ 1,007,691.00 ₹ 0.00

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Name of Project: Development of Administrative-cum-Academic Block for the College of Horticulture at Morena (M.P.), under RLBCAU.

BUILDING NAME : ADMIN CUM ACDEMIC BLOCK

SCHEDULE OF QUANTITIES FOR SUPPLY, ERECTION, TESTING AND COMMISSIONING

ELECTRICAL WORKS (AS PER DSR 2025)

As Per DSR AS PER MARKET RATE

S.NO DSR ITEMS DESCRIPTION OF ITEM UNIT

Rate DSR 2025 AMOUNT (RS.) RATE (RS.) AMOUNT (RS.)

1 SUBHEAD- I: DISTRIBUTION BOARD

Supplying and fixing following way, single pole and neutral, sheet

steel, MCB distribution board, 240 V, on surface/ recess complete

1 2.3 with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator)

Supplying and fixing following way, horizontal type three pole and

neutral, sheet steel, MCB distribution board, 415 V, on surface/

recess, complete with tinned copper bus bar, neutral bus bar, earth

2 2.4 bar, din bar, interconnections, powder painted including earthing etc.

as required. (But without MCB/RCCB/ Isolator)

Supplying and fixing of following ways surface/ recess mounting,

vertical type, 415 V, TPN MCB distribution board of sheet steel, dust

protected, duly powder painted, inclusive of 200 A, tinned copper bus

bar, common neutral link, earth bar, din bar for mounting MCBs (but

3 2.5 without MCBs and incomer) as required.Make:BS,Havells,Legrand

(Note : Vertical type MCB TPDB is normally used where 3 phase

outlets are required.)

Supplying and fixing following rating, double pole, 240 volts, isolator

4 2.12 in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in

5 2.13 the existing MCB DB complete with connections, testing and

commissioning etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C"

curve, miniature circuit breaker suitable for inductive load of

following poles in the existing MCB DB complete with connections,

testing and commissioning etc. as required.

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

As Per DSR AS PER MARKET RATE

S.NO DSR ITEMS DESCRIPTION OF ITEM UNIT

Rate DSR 2025 AMOUNT (RS.) RATE (RS.) AMOUNT (RS.)

Supplying and fixing single pole blanking plate in the existing MCB

e) DB complete etc. as required.

Supplying and fixing following rating, double pole, single phase and

neutral, 240 volts, residual current circuit breaker ( RCCB), having a

7 2.14 sensitivity current upto 30 milliamperes in the existing MCB DB

complete with connections, testing and commissioning etc as required.

Supplying and fixing following rating, four pole, three phase and

neutral, 415 volts, residual current circuit breaker ( RCCB), having a

8 2.15 sensitivity current upto 30 milliamperes in the existing MCB DB

complete with connections, testing and commissioning etc as required.

Total carried over to Summary 721,815.00 0.00

2 SUB-HEAD - II : INTERNAL WIRING

1 Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable in surface / recessed steel conduit, with modular

1.30 switch, modular plate, suitable GI box and earthing the

point with 1.5 sq.mm FRLS PVC insulated copper conductor single

core cable etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan

point/ call bell point (without independent

switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor

2 1.54 single core cable in surface/ recessed steel conduit, and earthing the

point with 1.5 sq. mm FRLS PVC insulated copper conductor single

core cable etc. as required

3 Wiring for circuit/ submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated copper conductor, single core

cable in surface/ recessed steel conduit as required.

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

As Per DSR AS PER MARKET RATE

S.NO DSR ITEMS DESCRIPTION OF ITEM UNIT

Rate DSR 2025 AMOUNT (RS.) RATE (RS.) AMOUNT (RS.)

Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providing and fixing

4 1.31 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, Each 570.00 545.00 310,650.00

connection etc. as required. (For light plugs to be used in residential

Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providing and fixing

6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps

modular switch, connection etc. as required.

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket

outlet, with 2 pole and earth, metal enclosed plug top along with 20

amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in

6 2.18 recess, with chained metal cover for the socket out let and complete Each 25.00 1,806.00 45,150.00

with connections, testing and commissioning etc. as required.

3 SUB-HEAD III - FANS & LIGHT FIXTURES:

LED Down lighter (SMD Type) (System lumen efficacy ≥120 <135 lm/Watt )

Supplying, installation, Testing & Commissioning of LED Recessed /

surface Down lighter (Round / square/ Rectangular) SMD type of following

body material with PMMA and prismatic diffuser and construction as per IS :

10322 with driver as per the requirement with Driver efficiency >85%,

Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range

-15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with

Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 ,

UGR (Unified Glare Rating) < 19, Flicker free (flicker should

be below 5 %), life time (LED,Driver & electrical circuitry), life time of

minimum 50000 Burning Hours with , 70% of initial Lumen maintained

till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per

ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum

power consumption should not more than the specified rating and Fixture

shall be of relevant BIS standard and trade mark certificate ( T.C.).

Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on

housing. OEM must have its own in house NABL lab setup for all

testing facilities for LED fixtures. "complete in all respect i/c

connections with 1.5 sq mm FRLS, PVC insulated copper conductor

single core cable and earthing etc. as required with Minimum 5 year OEM

warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80

Test report from NABL lab for all testing required for LED fixtures as

per BIS shall be submitted. Shape size and CCT shall be as approved by

Engineer-in-Charge as per requirement. (Thermal management: heat sink

of aluminum housing such that LED junction temperature shall not rise

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

As Per DSR AS PER MARKET RATE

S.NO DSR ITEMS DESCRIPTION OF ITEM UNIT

Rate DSR 2025 AMOUNT (RS.) RATE (RS.) AMOUNT (RS.)

Powder coated die cast /Extruded aluminum Body including trim .

2 DSR2025-8.5 LED Down lighter (COB Type) (System lumen efficacy ≥120 lm/Watt )

Supplying, installation, Testing & Commissioning of LED Recessed /

surface Down lighter (Round / square/ Rectangular) COB Type of

following body material and construction as per IS : 10322 with driver as per

the requirement with Driver efficiency >85%, Operating voltage AC 140-

270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg

centigrade, internal surge protection of 2.5 KV with Short & Open

circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified

Glare Rating) < 19, Flicker free (flicker should be below 5 %), life time

(LED,Driver & electrical circuitry), life time of minimum 50000 Burning Hours

with , 70% of initial Lumen maintained till life ends , CCT 3000°K /

4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard

Deviation Color Matching) <3, Maximum power consumption should not

more than the specified rating and Fixture shall be of relevant BIS standard

and trade mark certificate ( T.C.). Manufactures Word Mark/ Name

Engraved/ Embossing/ Screen printing on housing. OEM must have its

own in house NABL lab setup for all testing facilities for LED fixtures.

complete in all respect i/c connections with 1.5 sq mm FRLS, PVC

insulated copper conductor single core cable and earthing etc. as required

with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135

lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing

required for LED fixtures as per BIS shall be submitted. Shape size and

CCT shall be as approved by Engineer-in-Charge as per requirement.

(Thermal management: heat sink of aluminum housing such that LED

junction temperature shall not rise above 90°C).

Powder coated die cast /Extruded aluminium Body including trim with

Aluminium Reflector

Supply, Installation, testing & commissioning of LED Bulkhead

Luminaries, made of high-pressure die-cast Aluminium body with

polycarbonate diffuser. Luminaries should be with minimum system

efficacy of 110Lumen/Watt and minimum system lumen output of

1100lm.LED used shall have life of 50000Hrs @ L70B50, CCT of

6500°K, SDCM≤5 & CRI≥80. The luminaire driver shall comply to

following parameters at 220V to 240V: PF≥0.90 (@full load), THD ≤

NDSR-1.1 10% (@full load) & in-built surge protection of 2.5KV. The input Each 24.00 1,386.63 33,279.10

voltage range shall be 140V to 270V. The fixture should comply with

the parameters as per IS10322. The luminaire shall have class C

serviceability. The luminaire shall be IP66 & IK09 compliant. The

luminaire brand name shall be embossed/engraved on the

luminaire/accessory/Endplate & not screen printed or put using

sticker. Luminaire manufacturer must have In-house NABL

accredited lab to conduct LM79 as per 2019 Standard, Type test as

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

As Per DSR AS PER MARKET RATE

S.NO DSR ITEMS DESCRIPTION OF ITEM UNIT

Rate DSR 2025 AMOUNT (RS.) RATE (RS.) AMOUNT (RS.)

4 DSR2025-9.2 Brush Less Direct Current (BLDC) Motor

Supply, Installation, Testing and Commissioning of ceiling fan with Brush

Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal

( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit,

safety rope, copper winding, steel/Al body Power Factor not less than 0.9,

Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS :

374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for

operation with regulator for speed control and all remaining accessories

including safety pin, nut bolts, washers, temperature rise=75 degree C

(max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50

Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply,

earthing etc. complete as req

Brush Less Direct Current (BLDC) Motor, 1200mm, service value ≥

6.0 CM/Min/Watt, air delivery 210 CM/Min

5 Supply installation testing and comissioning 4ft LED (Light Emitting

Diode) tube light system power: 20W, luminous flux of luminaire

NDSR-1.2 2000lm or more, colour temperature of min 5700K , CRI>80, 230V Each 2 1145 2,289.04

constant current driver, luminaire profile powder coated in white.

Protection class I, L = 1175 mm (min),

6 Supply installation testing and comissioning LED Tube, Wall /

Surface / Celling Mounted, 10W(MIRROR LIGHT), luminous flux

of luminaire 900lm, IP 20,1200mm, Direct light emission, 230V,

NDSR-1.3 Electronic Control Gear, 5700K, Satin Diffuser, L=600mm (Min) Each 98 1321 129,418.70

7 DSR2025-8.7 LED Panel light 2x2 ft. (System lumen efficacy ≥120 <135 lm/Watt)

Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of

following body material and construction as per IS : 10322 with driver as per

the requirement with Driver efficiency >85%, Operating voltage AC 140-

270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg

centigrade, internal surge protection of 2.5 KV with Short & Open circuit

protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare

Rating) < 19, Flicker free, (flicker should be below 5 %), life time

(LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with ,

70% of initial Lumen maintained till life ends,CCT 3000°K / 4000°K

/ 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard

Deviation Color Matching) <3, Maximum power consumption should not

more than the specified rating and Fixture shall be of relevant BIS standard

and trade mark certificate ( T.C.). Manufactures Word Mark/ Name

Engraved/ Embossing/ Screen printing on housing. complete in all respect

i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor

single core cable and earthing etc. as required with Minimum 5 year OEM

warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80

Test report from NABL lab for all testing required for LED fixtures as

per BIS shall be submitted. Shape size and CCT shall be as approved by

Engineer-in-Charge as per requirement. (Thermal management: heat sink

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

As Per DSR AS PER MARKET RATE

S.NO DSR ITEMS DESCRIPTION OF ITEM UNIT

Rate DSR 2025 AMOUNT (RS.) RATE (RS.) AMOUNT (RS.)

of aluminium housing such that LED junction temperature shall not rise

Powder coated die cast / Extruded aluminium Body (Thickness

LED Panel light 2x2 ft. (System lumen efficacy ≥120 <135

lm/Watt), 36 Watt

8 NDSR-1.4 SITC Fresh air exhaust fan with louvers 300 mm sweep Each 44 2,201.00 96,843.93

9 NDSR-1.5 SITC of wall fan Each 2 2,509.14 5,018.28

10 Supplying of MS Body Exhaust Fan heavy duty 230V A.C 50 cycles,

600 mm sweep, 900 rpm, energy efficient, complete erected in

NDSR-1.6 position with 16A 3 Pin Plug Top in the existing opening, including Each 4 13,205.99 52,823.96

making good the damage, connection, testing, commissioning etc. as

NDSR -1.7 SITC of Warm fight focus light, not less than 60W Each 10 5,135.66 51,356.63

LIGHT FIXTURES: to summary sheet 2,167,989.00 371,029.63

SUB HEAD - IV : LIGHTNING PROTECTION SYSTEM

1 Providing and fixing of lightning conductor finial, made of 25mm dia

300mm long, copper tube, having single prong at top, with 85mm dia

6 mm thick copper base plate including holes etc. complete as

2 Jointing copper / G.I. tape (with another copper/ G I tape, base of the

6.3 finial or any other metallic object) by riveting / nut bolting/ sweating Each 250.00 139.00 34,750.00

and soldering etc as required.

3 Providing and fixing GI tape 20mm x 3mm thick on parapet or

6.6 surface of wall for lightning conductor as required. (for horizontal Metre 550.00 148.00 81,400.00

6.7 Providing and fixing G.I. tape 20mm x 3mm thick on parapet or Metre 450.00 238.00 107,100.00

surface of wall for lightning conductor as required. (For vertical run.)

5 Providing and fixing testing joint, made of 20mm x 3mm thick G.I.

6.10 strip, 125mm long with 4 Nos. of G.I. bolts, nuts, check nuts and Each 20.0 140.00 2,800.00

spring washers etc. complete as required.

6 Providing and laying G.I. tape, 32mm x 6mm thick, from earth

electrode directly in ground as required.

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

As Per DSR AS PER MARKET RATE

S.NO DSR ITEMS DESCRIPTION OF ITEM UNIT

Rate DSR 2025 AMOUNT (RS.) RATE (RS.) AMOUNT (RS.)

7 Earthing with G.I. earth pipe 4.5 metre long, 40mm dia including

accessories, and providing masonry enclosure with cover plate having

locking arrangement etc. with charcoal or coke and salt complete as

Total of Sub-Head - IV 413490 0.00

SUB HEAD - V: UPS

26.2 Online UPS- Input supply: Three Phase, Output supply: Three

Supplying, installation, Testing & Commissioning of of following

full load (Unity Power Factor) at operating temperature 0 to 40 deg C,

Relative humidity 0 to 95%, Online double conversion true sine wave

Uninterrupted hot swappable (allow for the replacement or addition of

battery modules without shutting down the entire system) modular

Supply (UPS) system with N+1 modules (N denotes total number of

requird for rated capacity). The UPS shall include a Rectifier, inverter,

battery bank suitable for 30 minutes back up (Battery VAH capacity

be less than 1600 VAH per KVA of UPS rating per Hour backup

load (Battery shall be VRLA, SMF in ABS Container) and Static

switch alongwith provision for manual bypass, suitable isolation

for additional protection against neutral faults etc. UPS shall have

phase sequence correction. The UPS systems offered are to be of the

technology with Digital Control Microprocessor based for reliable

using Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier

inverter (3 Level) with PWM (Pulse Width Modulation). The quality

manufacturing and inspection process should confirm to the relevant

standards such as IEC/EN/VDE. The operating efficiency of the

UPS systems shall be >96% while operating on battery mode and

quality power to the 100% non-linear loads. Current total harmonic

effect(ITHD) on the input grid shall be < 5% at 50 %load. (The

inductor (L) and a capacitor (C)) filters shall be included in UPS cost),

extreme power factor kit to be included to limit the input power factor

0.99 and output power factor shall be unity (i.e. kw rating of the UPS

kva rating x 1 ), however UPS shall be suitable to take load at 0.7

leading power factor loads. UPS shall be suitable for incoming supply

3Phase 400V +/-20%, 50 Hz +/-5 Hz, AC Output voltage: 3Phase

50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins, Sine wave

Non condensing, noise level less than 60db at 1 meter distance,

Input Under voltage over voltage, abnormal out voltage, battery over

charging, output over current, short circuit protection, battery deep

discharge protection, 10KV surge. UPS must comply with low voltage

electromagnetic compatibility (EMC) achieved as per EN 6204,

I and Part 2, it shall be a Voltage and Frequency Independent (VFI)-

UPS. Communication RS232/RS485/SNMP port open protocol for

integration, all hardware & software for iOT Communication as per

by Engineering in charge. Required battery racks and interconnecting

copper conductor cables of suitable size and connectors and all

accoseries are inclusive of the cost). This system must provide a

logging and alarming of all monitored points plus email notification.

air-cooling with integral inbuilt fans with redundancy (if one fan fail

should be able to handle at least 80% of the load, Noise Level 65 DB

meter distance. The system shall be in compliance IEC 62040- 1,2 &

16242 and CPWD Specification. Display Panel (minimum) (In-build

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

As Per DSR AS PER MARKET RATE

S.NO DSR ITEMS DESCRIPTION OF ITEM UNIT

Rate DSR 2025 AMOUNT (RS.) RATE (RS.) AMOUNT (RS.)

more LC Display / LED ) to display : a) Input: Voltage, current,

Bypass: Voltage, Frequency. c) Output: Voltage, frequency, Current.

d) Battery: Voltage, Capacity. e) Load: KVA, KW, Percentage.

f)Temperature: STS, Inverter, PFC. g) Event Logging & Statistical

LCD/LED): UPS should capture and display up to 3000 events like:

temperature / DC Bus Fail / Fan Fail / Fuse Fail / Overload / Short-

Device Fail / Inverter Fail / Rectifier Fail / Bypass Fail, etc. h)

No. of power failures / Transfers to Bypass / Total Running time, etc.

Mode of Operation /Battery Mode of Operation / Bypass feeding the

UPS Fault /Battery charging and discharging, overload, battery

battery capacity. j) Audible Alarms : Mains Failure, Battery Low

Overload, Fault, Shutdown, Input Over, Under Voltage, Output Over,

Voltage, Battery Over, Under Voltage, Over Load and short circuit,

Temperature. The UPS should have QR code which should contain

drawing, test report OEM manual,Geo- Tag of manufacturing

26.2.5 60KVA (Each Power module shall be < =10 KVA) Each 1 913,600.00 913,600.00

Total of Sub-Head - V 913,600.00 0.00

SUB HEAD -VI : RACEWAY AND CABLE TRAY

1 Metal Partition Raceways : Floors

Supply and fixing in position of following size of under floor GI

raceways [consists of body & cover] for distributing cabling in

screed floor installations. Raceway should be made up of Pre

galvanized sheet conforming to IS 277 with thickness of

1.6mm consists of Body and Openable cover with 275 GSM

coating. Raceway should be supplied with required

accessories such as fixing brackets and coupling plates as

required. Raceway should be confirmed with the standard EN

60-670 and EN 50085-2-2, IP 20 & IK08 in recess / on surface

including chasing the wall/floor complete as required of

following configurations:

Partition Metal Junction Box : Floors

Supply and fixing in position height adjustable under floor

crossover Junction box for Raceways for direct access to

cables at the intersection of Raceways supplied completely

with base and cover plate [lid]. Junction box should be made

of Pre galvanized sheet consist of body and cover. Height of

the junction box should be adjustable from minimum 65mm.

Junction box should be supplied with the metal cover for

protecting the junction box during constructions at site. It

should be confirmed with the standard EN 50085-2-2 including

all accessories complete as required of following sizes:

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

As Per DSR AS PER MARKET RATE

S.NO DSR ITEMS DESCRIPTION OF ITEM UNIT

Rate DSR 2025 AMOUNT (RS.) RATE (RS.) AMOUNT (RS.)

NDSR-10 Box : 400 x 400 x 65-90mm [1mm base & 3mm lid] Nos 1,556.84 0.00

Cover Plate : 400 x 400mm

Cover Plate : 300 x 300mm

NDSR-12 Box : 225 x 225 x 65-90mm [1mm base & 3mm lid] Nos 45 983.11 44,240.07

Cover Plate : 225 x 225mm

NDSR-13 Box : 150 x 150 x 65-90mm [1mm base & 3mm lid] Nos 80 783.56 62,684.43

Cover Plate : 150 x 150mm

3.0 Cable Tray

3.1 4.1 Supplying and installing following size of perforated pre-

painted M.S cable trays with perforation not more than 17.5%,

inconvenient sections, joined with connectors, suspended from

the ceiling with M.S. suspenders including bolts&nuts, painting

suspenders etc as required.

a 4.1.1 100 mm width X 50 mm depth X 1.6mm thickness Meter 350 623.00 218,050.00

b 4.1.2 150 mm width X 50 mm depth X 1.6mm thickness Meter 200 686.00 137,200.00

c 4.1.4 300 mm width X 50 mm depth X 1.6mm thickness Meter 100 866.00 86,600.00

3.2 4.2 Supplying and installing following size of perforated pre-

painted M.S cable trays bends with perforation not more than

17.5%, inconvenient sections, joined with connectors,

suspended from the ceiling with M.S. suspenders including

bolts&nuts, painting suspenders etc as required.

a 4.2.1 100 mm width X 50 mm depth X 1.6mm thickness Each 20 948.00 18,960.00

b 4.2.2 150 mm width X 50 mm depth X 1.6mm thickness Each 20 1,105.00 22,100.00

c 4.2.4 300 mm width X 50 mm depth X 1.6mm thickness Each 5 1,544.00 7,720.00

3.3 4.3 Supplying and installing following size of perforated pre-

painted M.S cable trays reducers with perforation not more

than 17.5%, inconvenient sections, joined with connectors,

suspended from the ceiling with M.S. suspenders including

bolts&nuts, painting suspenders etc as required.

a 4.3.1 100 mm width X 50 mm depth X 1.6mm thickness Each 15 1,089.00 16,335.00

b 4.3.2 150 mm width X 50 mm depth X 1.6mm thickness Each 10 1,281.00 12,810.00

c 4.3.4 300 mm width X 50 mm depth X 1.6mm thickness Each 5 1,826.00 9,130.00

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

As Per DSR AS PER MARKET RATE

S.NO DSR ITEMS DESCRIPTION OF ITEM UNIT

Rate DSR 2025 AMOUNT (RS.) RATE (RS.) AMOUNT (RS.)

3.4 4.4 Supplying and installing following size of perforated pre-

painted M.S cable trays Tee's with perforation not more than

a 4.4.1 100 mm width X 50 mm depth X 1.6mm thickness Each 5 1,231.00 6,155.00

b 4.4.2 150 mm width X 50 mm depth X 1.6mm thickness Each 5 1,498.00 7,490.00

c 4.4.4 300 mm width X 50 mm depth X 1.6mm thickness Each 2 2,110.00 4,220.00

3.5 4.5 Supplying and installing following size of perforated pre-

painted M.S cable trays Cross members with perforation not

more than 17.5%, inconvenient sections, joined with

connectors, suspended from the ceiling with M.S. suspenders

including bolts&nuts, painting suspenders etc as required.

a 4.5.1 100 mm width X 50 mm depth X 1.6mm thickness Each 50 1,089.00 54,450.00

b 4.5.2 150 mm width X 50 mm depth X 1.6mm thickness Each 30 1,281.00 38,430.00

c 4.5.4 300 mm width X 50 mm depth X 1.6mm thickness Each 20 1,876.00 37,520.00

Total of Sub-Head - VI 677,170.00 1,567,250.23

SUB HEAD-VII : LIFT

1 21.1 Passenger Lift

Supplying, Installation, Testing & Commissioning of

following capacity passenger Machine room less

(MRL) lift with regenerative drive as per CPWD

General Specification for Electrical Works (Part-III Lift

& Escalator) 2003, BIS Codes, NBC 2016 as

amended upto date having provision for barrier free

access as per Harmonised Guidelines & Standards for

Universal Accessibility in India - 2021 of MoHUA,

serving different floors in the lift shaft as per detailed

specifications enclosed and as under including all

other equipment and accessories complete as

(i) Speed-1 MPS

(ii) Floors-5 (G+4)

(iii) Travel -17 Meters (approx.)

(iv) Stops & opening- 5 stops and 5 openings

(v) Controller: A.C. variable voltage & variable

(vi) Automatic rescue device (ARD) complete with dry

maintenance free batteries as required.

vii) Operation: Microprocessor based single automatic

push button/simplex selective collective/duplex

collective selective with/without attendant

(viii) Power-415 Volts+10%, 3 phase, 50 Hz, 4 wires

(ix) Car Enclosure: Stainless steel scratch proof

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

As Per DSR AS PER MARKET RATE

S.NO DSR ITEMS DESCRIPTION OF ITEM UNIT

Rate DSR 2025 AMOUNT (RS.) RATE (RS.) AMOUNT (RS.)

(Moon Rock/Honeycomb/ Hairline Finish) on all sides

and stainless steel decorative ceiling with fans (indirect

throw) and LED fitting.

(x) The car flooring should be smooth and antiskid as

approved by engineer-in-charge.

(xi) Type of doors

(a) Car: Power operated, centre opening horizontal

sliding stainless steel scratch proof (Moon

Rock/Honeycomb/ Hairline Finish).

(b) Landing doors: stainless steel scratch proof .

(xii) A hand rail not less that 600mm long at 900mm

above floor level to be fixed adjacent to control panel

in the lift car.

(xiii)Voice announcement system in the car to

announce the position of the elevator in the hoist

way as the car passes or stops at floor served by the

(xiv) Closed loop Control System, protection against

power fluctuation, self diagnostic control, Landing

doors 2 hours Fire rated, Overload detection and

protection, Overspeed Governer, Dot Matrix LED D &

P Indicators In Car & Landings, BMS Compatibility,

tamper proof infrared curtain covering almost the entire

height of the lift car door, Alarm horn, Anti Nuisance

Operation, CCTV camera system with 4 MP IP

camera, suitable NVR and HDD for 30 days storage

backup , Firemen switch, 2/3 way intercom,

Emergency Stop Switch with battery backup for fan

and light fitting for 1 hour, pit ladder.

(xv) The lift doors shall have a vision panel to enable

persons with hearing impairment to

signal for help or assistance in the event of an

(xvi) An appropriate technological support be provided

emergency messaging |services or alarms etc.) to

respond to the emergency requirements of person with

hearing impairment or deafness.

(xvii) In case of failure of ARD or other electronic

devices, a provision of manual rescue be provided

Total of Sub-Head 3368451 0

SUB HEAD-VIII : SOLAR

17.1 Supplying Installation, Testing and Commissioning of

on-grid Solar Photovoltaic Power Plant conforming to

various applicable standards BIS, IEC, MNRE

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

As Per DSR AS PER MARKET RATE

S.NO DSR ITEMS DESCRIPTION OF ITEM UNIT

Rate DSR 2025 AMOUNT (RS.) RATE (RS.) AMOUNT (RS.)

guidelines, the Central Electricity Authority

Regulations and CPWD Specifications as amended up

to date, consisting of Mono/Poly Crystalline silicon

solar cells module, net metering facility, necessary

control, protections, earthing, cabling, mounting

structure, junction boxes, power conditioning units,

Real time online web interfaced Data Monitoring

System, Distribution panels, grid connecting

arrangement, conduits, pipes, cable trays and other

accessories etc. as required.

a) High Energy Efficiency Solar Photovoltaic Module of

capacity 330 Wp or above, manufactured in India,

conforming to IS 14286/IEC 61215, IS/IEC 61730-

Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic

Module conversion efficiency shall not be less than

23% at STC with temperature coefficient of Pmax

better than -0.30% per 0C. PV modules used in solar

power plants/ systems must be warranted for their

output peak watt capacity, which should not be less

than 90% at the end of 10 years and 80% at the end of

25 years. Solar Modules shall be designed to operate

in relative humidity upto 100% with temperature

between -10 0C and +85 0C. Further, each PV module

used in any solar power project must have Radio

frequency identification tag with information such as

name of manufacturer, month and year of

manufacturing, country of origin (separately for Solar

cell and module), I-V curve, Unique Serial No and

Model No of the module, Wattage, Im, Vm and FF,

name of test lab issuing IEC certificate.

b)Power Conditioning Unit (PCU) of 350-800 V DC

Input voltage range and 415 V AC, three phase, 4

wire, 50Hz +/- 2.5 Hz, output voltage suitable to

generate AC with a variation of 10% at nominal

voltage. Power with efficiency not less than 97%, total

harmonic distortion less than 3% and suitable for

ambient temperature from 0 to 50 0C, Minimum IP-65

for outdoor and Minimum IP 21 for indoor, Built-in

meter and data logger, MPPT, switching devices

IGBT/MOSFETs and controller Microprocessor /DSP.

PCU/inverter shall be capable of complete automatic

operation including wake-up, synchronization &

shutdown. The PCU shall be able to withstand

unbalanced load conforming to IEC standard with

shutdown/standby mode. It must be provided with grid

islanding along with manual disconnect pole isolation

switch besides automatic disconnection. Minimum

protections: Mains Under / Over Voltage, Over current,

Over/Under grid frequency, Over temperature, Surge

voltage induced at output due to external source,

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

As Per DSR AS PER MARKET RATE

S.NO DSR ITEMS DESCRIPTION OF ITEM UNIT

Rate DSR 2025 AMOUNT (RS.) RATE (RS.) AMOUNT (RS.)

Short-circuit, Lightening, Anti Islanding (for grid synch.

Mode) and other protections as per applicable

standards. LCD/LED display of minimum parameters:

DC input voltage, DC current, AC Voltage and current

(all 3 phases, in case of 3 phase), Instantaneous &

cumulative AC output power, Daily DC energy

produced and other parameters applicable standard.

Communication interface RS 485 / RS 232.

c) Module mounting structure: The roof top solar plant

generation units shall be installed by using supporting

Aluminium/Galvanized MS structure (mass of zinc

coating shall be as per IS4759 ) having minimum head

room clearance of 2.4 meter above the terrace level /

ground level. The mounting structure would be

designed to sustain wind load and seismic parameter

of the site of installation. All the structure shall be

design as per applicable BIS code and the material

shall also confirm the applicable BIS Code. Structural

material shall be corrosion resistant and electrolytically

compatible with the materials used in the module

frame, its fasteners, nuts and bolts. The suitable

arrangements for maintenance and cleaning shall be

d) Real time online web interfaced Data Monitoring

System complete with accessories for various

parameters such as Solar Irradiance, temperature, AC

Output Voltage and current, Output Power, Power

factor, DC Input Voltage and Current, Time Active,

Time disabled, Time Idle, Power produced and other

parameters as per standard practices.

e) Array junction box & Main junction box with IP 65

protection and termination arrangement for incoming

and outgoing cable along with glands, lugs and other

accessories etc. as required. Each junction box shall

be made of GRP/FRP/Powder Coated Aluminium /cast

aluminium alloy with full dust, water & vermin proof

arrangement with High quality Suitable capacity Metal

Oxide Varistors(MOVs) (semiconductor diode with

resistant applied voltage)/ surge arrestors and suitable

Reverse Blocking Diodes, isolation switches isolate

the DC input to Inverter, copper bus bar etc.

f) Lightning, surge voltage protection, earthing

protection and grid islanding.

g) Cables: Connections & Interconnections by

required size IR/UV protected XLPE insulated copper

conductor 1.1 kV grade armored power and control

cables(ISI Marked) along with supplying & fixing of

necessary channel/conduit, GI cable trays, supports,

lugs, thimble and other accessories etc. as required.

h) DC Distribution Board And AC Distribution Panel

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

As Per DSR AS PER MARKET RATE

S.NO DSR ITEMS DESCRIPTION OF ITEM UNIT

Rate DSR 2025 AMOUNT (RS.) RATE (RS.) AMOUNT (RS.)

Board: IP65, free standing, metal cladded, having

copper bus bar, having required protection and control

gears, connection-interconnection, etc. as required.

Total of Sub-Head 2171200 0

SUB HEAD-IX : Panels

NDSR-14 LIFT PANEL

LIFT PANEL FOR ADMIN BUILDING

1 No. 100amps 4P MCCB(16KA) with thermal Magnetic release

(PRTM) with Class-C transient voltage surge suppression device

suitable for 3 phases as per specifications.

1 No.100 amps ATS

METERING & INDICATION for each Incomer

1 set of R,Y,B phase indicating lamps

Multifunction digital meter (consisting of Voltage, Current,

Frequency, PF, kWh, kVA, harmonics upto 15th order & %THD)

with RS-485 Port.

Sets of 100/5A, CL-1, 15VA CTs for measuring.

Sets of phase indicating lamp with 2A control MCBs.

150 A TPN Aluminium Bus Bar with colour coded PVC Sleeves

3 Nos. 63 Amp TP MPCB

3 Nos. 63 Amp TP MCB

1 Nos.40 Amp DP MCB

Lift Panel admin building as described above Set 1 165,074.88 165,074.88

NDSR-15 MAIN BUILDING PANEL FOR ADMIN BUILDING

1 No. 500amps 4P MCCB(25KA) with thermal Magnetic release

(PRTM) with Class-C transient voltage surge suppression device

suitable for 3 phases as per specifications.

METERING & INDICATION for each Incomer

1 set of R,Y,B phase indicating lamps

Multifunction digital meter (consisting of Voltage, Current,

Frequency, PF, kWh, kVA, harmonics upto 15th order & %THD)

with RS-485 Port.

Sets of 500/5A, CL-1, 15VA CTs for measuring.

Sets of phase indicating lamp with 2A control MCBs.

630A TPN Aluminium Bus Bar with colour coded PVC Sleeves

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

As Per DSR AS PER MARKET RATE

S.NO DSR ITEMS DESCRIPTION OF ITEM UNIT

Rate DSR 2025 AMOUNT (RS.) RATE (RS.) AMOUNT (RS.)

8 No. 100amps 4P MCCB

3No. 63amps 4P MCCB

1 No. 40amps 4P MCB

MAIN PANEL DESCRIVED ABOVE Set 1 469,913.15 469,913.15

NDSR-16 ADMIN BUILDING GROUND FLOOR PANEL

1 No. 100amps 4P ACB(16KA) with thermal Magnetic release

(PRTM) with Class-C transient voltage surge suppression device

suitable for 3 phases as per specifications.

METERING & INDICATION for each Incomer

1 set of R,Y,B phase indicating lamps

Multifunction digital meter (consisting of Voltage, Current,

Frequency, PF, kWh, kVA, harmonics upto 15th order & %THD)

with RS-485 Port.

Sets of 100/5A, CL-1, 15VA CTs for measuring.

Sets of phase indicating lamp with 2A control MCBs.

125A TPN Aluminium Bus Bar with colour coded PVC Sleeves

3 No. 63amps 4P MCB

3 No. 40amps 4P MCB

14 No. 32amps DP MCB

ADMIN BUILDING GROUND FLOOR PANEL DESCRIVED

NDSR-17 ADMIN BUILDING FIRST FLOOR PANEL

1 No. 100amps 4P MCCB(25KA) with thermal Magnetic release

(PRTM) with Class-C transient voltage surge suppression device

suitable for 3 phases as per specifications.

1 No.100amps ATS

METERING & INDICATION for each Incomer

1 set of R,Y,B phase indicating lamps

Multifunction digital meter (consisting of Voltage, Current,

Frequency, PF, kWh, kVA, harmonics upto 15th order & %THD)

with RS-485 Port.

Sets of 100/5A, CL-1, 15VA CTs for measuring.

Sets of phase indicating lamp with 2A control MCBs.

125A TPN Aluminium Bus Bar with colour coded PVC Sleeves

3 No. 63amps 4P MCB

3 No. 40amps 4P MCB

14 No. 32amps DP MCB

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

As Per DSR AS PER MARKET RATE

S.NO DSR ITEMS DESCRIPTION OF ITEM UNIT

Rate DSR 2025 AMOUNT (RS.) RATE (RS.) AMOUNT (RS.)

ADMIN BUILDING FIRST FLOOR PANEL DESCRIVED

NDSR-18 ADMIN BUILDING SECOND FLOOR PANEL

1 No. 100amps 4P ACB(16KA) with thermal Magnetic release

(PRTM) with Class-C transient voltage surge suppression device

suitable for 3 phases as per specifications.

METERING & INDICATION for each Incomer

1 set of R,Y,B phase indicating lamps

Multifunction digital meter (consisting of Voltage, Current,

Frequency, PF, kWh, kVA, harmonics upto 15th order & %THD)

with RS-485 Port.

Sets of 100/5A, CL-1, 15VA CTs for measuring.

Sets of phase indicating lamp with 2A control MCBs.

125A TPN Aluminium Bus Bar with colour coded PVC Sleeves

2 No. 63amps 4P MCB

3 No. 40amps 4P MCB

3 No. 32amps DP MCB

ADMIN BUILDING SECOND FLOOR PANEL DESCRIVED

ADMIN BUILDING THIRD FLOOR PANEL/Raw Power Panel

1 No. 100amps 4P MCCB(16KA) with thermal Magnetic release

(PRTM) with Class-C transient voltage surge suppression device

suitable for 3 phases as per specifications.

1 No.100amps ATS

METERING & INDICATION for each Incomer

1 set of R,Y,B phase indicating lamps

Multifunction digital meter (consisting of Voltage, Current,

Frequency, PF, kWh, kVA, harmonics upto 15th order & %THD)

with RS-485 Port.

Sets of 100/5A, CL-1, 15VA CTs for measuring.

Sets of phase indicating lamp with 2A control MCBs.

125A TPN Aluminium Bus Bar with colour coded PVC Sleeves

6 No. 63amps 4P MCB

5 No. 40amps 4P MCB

MAIN BUILDING THIRD FLOOR PANEL DESCRIVED

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

As Per DSR AS PER MARKET RATE

S.NO DSR ITEMS DESCRIPTION OF ITEM UNIT

Rate DSR 2025 AMOUNT (RS.) RATE (RS.) AMOUNT (RS.)

NDSR-20 ADMIN BUILDING FOURTH FLOOR PANEL

1 No. 100amps 4P MCCB(16KA) with thermal Magnetic release

(PRTM) with Class-C transient voltage surge suppression device

suitable for 3 phases as per specifications.

1 No.100amps ATS

METERING & INDICATION for each Incomer

1 set of R,Y,B phase indicating lamps

Multifunction digital meter (consisting of Voltage, Current,

Frequency, PF, kWh, kVA, harmonics upto 15th order & %THD)

with RS-485 Port.

Sets of 100/5A, CL-1, 15VA CTs for measuring.

Sets of phase indicating lamp with 2A control MCBs.

125A TPN Aluminium Bus Bar with colour coded PVC Sleeves

2 No. 63amps 4P MCB

2 No. 40amps 4P MCB

8 No. 32amps DP MCB

ADMIN BUILDING FOURTH FLOOR PANEL DESCRIVED

NDSR-21 HVAC MAIN PANEL ADMIN BUILDING

1 No. 500amps 4P MCCB(25KA) with thermal Magnetic release

(PRTM) with Class-C transient voltage surge suppression device

suitable for 3 phases as per specifications.

1 No.400amps ATS

METERING & INDICATION for each Incomer

1 set of R,Y,B phase indicating lamps

Multifunction digital meter (consisting of Voltage, Current,

Frequency, PF, kWh, kVA, harmonics upto 15th order & %THD)

with RS-485 Port.

Sets of 400/5A, CL-1, 15VA CTs for measuring.

Sets of phase indicating lamp with 2A control MCBs.

630A TPN Aluminium Bus Bar with colour coded PVC Sleeves

2 No. 200amps 4P MCCB

2 No. 125amps 4P MCCB

8 No. 100amps 4P MCCB

AHU MAIN PANEL DESCRIVED ABOVE Set 1 346,657.24 346,657.24

NDSR-22 VTPN DB ADMIN BUILDING

1 No.100amps 4P MCCB(25KA) with thermal Magnetic release

(PRTM) with Class-C transient voltage surge suppression device

suitable for 3 phases as per specifications.

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

As Per DSR AS PER MARKET RATE

S.NO DSR ITEMS DESCRIPTION OF ITEM UNIT

Rate DSR 2025 AMOUNT (RS.) RATE (RS.) AMOUNT (RS.)

1 No.100amps ATS

METERING & INDICATION for each Incomer

1 set of R,Y,B phase indicating lamps

Multifunction digital meter (consisting of Voltage, Current,

Frequency, PF, kWh, kVA, harmonics upto 15th order & %THD)

with RS-485 Port.

Sets of 100/5A, CL-1, 15VA CTs for measuring.

Sets of phase indicating lamp with 2A control MCBs.

125A TPN Aluminium Bus Bar with colour coded PVC Sleeves

7 No.32amps 4P MCB

AHU GR. FLOOR VTPN DB DESCRIVED ABOVE Set 5 55,024.96 275,124.80

NDSR-23 UPS PANEL

1 No. 125amps 4P MCCB(25KA) with thermal Magnetic release

(PRTM) with Class-C transient voltage surge suppression device

suitable for 3 phases as per specifications.

1 No.125amps ATS

METERING & INDICATION for each Incomer

1 set of R,Y,B phase indicating lamps

Multifunction digital meter (consisting of Voltage, Current,

Frequency, PF, kWh, kVA, harmonics upto 15th order & %THD)

with RS-485 Port.

Sets of 125/5A, CL-1, 15VA CTs for measuring.

Sets of phase indicating lamp with 2A control MCBs.

160A TPN Aluminium Bus Bar with colour coded PVC Sleeves

4 No.63amps 4P MCB

4 No.40amps 4P MCB

UPS PANEL DESCRIVED ABOVE Set 1 176,079.87 176,079.87

Subhead-IX Total 0.00 2,918,523.83

SUB HEAD X: Earthing

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including Set

accessories, and providing masonry enclosure with cover plate having

locking arrangement and watering pipe etc. with charcoal/ coke and

salt as required.

5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick Set 11

including accessories, and providing masonry enclosure with cover

plate having locking arrangement and watering pipe of 2.7 metre long

etc. with charcoal/ coke and salt as required.

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

As Per DSR AS PER MARKET RATE

S.NO DSR ITEMS DESCRIPTION OF ITEM UNIT

Rate DSR 2025 AMOUNT (RS.) RATE (RS.) AMOUNT (RS.)

5.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick Set 10

including accessories, and providing masonry enclosure with cover

plate having locking arrangement and watering pipe of 2.7 metre long

etc. with charcoal/ coke and salt as required.

5.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground Metre 100

level for conductor earth electrode, including connection/ termination 62.00 6,200.00

with GI thimble etc. as required.

5.10 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. Metre 100

pipe FRLSom earth electrode including connection with brass nut,

bolt, spring, washer excavation and re-filling etc. as required.

5.11 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. Metre 150

pipe from earth electrode including connection with G.I. nut, bolt,

spring, washer excavation and re-filling etc. as required.

5.12 Providing and laying earth connection from earth electrode with 6 Metre 150

SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode

including connection with G.I. thimble excavation and re-filling as

5.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in Metre 200

recess for connections etc. as required.

5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess Metre 300

for connections etc. as required.

5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for Metre 130

loop earthing as required.

Sub Head X Total 1,007,691.00 0.00

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Name of Project: Development of Administrative-cum-Academic Block for the College of Horticulture at

Morena (M.P.), under RLBCAU.

BUILDING NAME : ADMIN CUM ACADEMIC BUILDING

Detailed estimate of Internal & External Plumbing Services

S. No. Description

Amount (in Rs.)

1 SANITARY FIXTURES & FITTINGS ₹ 3,362,455.20 ₹ 3,597,170.00

2 INTERNAL & EXTERNAL WATER SUPPLY ₹ 2,110,335.00 ₹ 307,597.50

3 SOIL, WASTE, VENT PIPES, RAIN WATER PIPES & FITTINGS. ₹ 5,647.20 ₹ 1,440,782.70

4 EXTERNAL SEWERAGE AND STORM WATER DRAINAGE ₹ 22,508.50

Add: Impact of Multiplying factor on DSR 2023 ₹ 5,352,420.36

GRAND TOTAL (DSR +NSR) ₹ 10,697,970.56

GRAND TOTAL (DSR +NSR) ₹ 10,697,970.56

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

Name of Project: Development of Administrative-cum-Academic Block for the College of Horticulture at Morena (M.P.), under

BUILDING NAME : ADMIN CUM ACADEMIC BUILDING

Schedule Of Quantity

TOTAL DSR Amount (in MR Rate MR Amount

DSR 2023 Description Unit DSR Rate (in Rs.)

QUANTITY Rs.) (in Rs.) (in Rs.)

SANITARY FIXTURES & FITTINGS

Providing and fixing white vitreous china extended wall mounting water

closet of size 780x370x690mm of approved shape including providing and

17.78 fixing white vitreous china cistern with dual flushing fitting,of flushing Each 116 ₹ 14,999.15 ₹ 1,739,901.40

capacity 3 litre/6 litre( adjustable to 4 litre/8 litres),including seat cover

and cistern fittings,nuts,bolts and gasket etc. complete.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass

single hole basin mixer of approved quality and make, including painting

of fittings and brackets, cutting and making good the walls wherever

a) White Vitreous China Wash basin size 630x450 mm with a 15 mm CP

Brass single hole basin mixer

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1

metre long with S.S. triangular plate to Eureopean type W.C. of quality and

make as approved by Engineer - in - charge.

Providing and fixing CP Brass 32mm size bottle trap of approved quality

& make and as per the direction of engineer in charge.

17.34 Providing and fixing toilet paper holder

Supply, Receiving, Storing & Fixing of C.P. brass twin coat hook with

PVC rawl plug & C.P. brass screw complete as required. Make :

Providing and fixing C.P. brass angle valve for basin mixer and geyser

18.53 points of approved quality conforming to IS:8931.

Providing and fixing unplasticised P.V.C. connection pipe with PTMT

18.74 Nuts, collar and bush of approved quality and colour.

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

TOTAL DSR Amount (in MR Rate MR Amount

DSR 2023 Description Unit DSR Rate (in Rs.)

QUANTITY Rs.) (in Rs.) (in Rs.)

18.74.2 15 mm nominal bore with 45 cm length Each 366 ₹ 121.90 ₹ 44,615.40

Providing and fixing Chromium Plated towel ring Rectangular shape with

concealed fittings arrangement of approved quality and colour, of

approved brand & manufacture complete as per direction of Engineer in

Providing and fixing Cp bras liquid soap container 109 mm wide, 125

mm high and 112 mm distance from wall of standard shape with bracket

of the same materials with snap fittings of approved quality and colour,

weighing not less than 105 gms.

Providing and fixing white vitreous china battery based infrared sensor

operated urinal of approx. size 610 x 390 x 370 mm having pre & post

flushing with water (250 ml & 500 ml consumption), having water inlet

from back side, including fixing to wall with suitable brackets all as per

manufacturers specification and direction of Engineer-in-charge.

Providing and fixing 75 mm high, 50 mm deep and 18 mm thick stone slab

table rubbed, edges rounded and polished, fixed in urinal partitions by

cutting a chase of appropriate width with chase cutter and embedding the

stone in the chase with epoxy grout or with cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as

per direction of Engineer-in-charge and finished smooth.

8.10.2 Granite Stone of approved shade Sqm 44 ₹ 4,051.85 ₹ 178,281.40

Supply and fixing of water cooler fully stainless steel of 60 litres cooling

capacity and 120 litres storage capacity to be operated on single phase

supply with ISI mark. Each Cooler shall be provide with 4 Nos pessmatic

tap for Drinking purpose.

Providing and fixing 600x450 mm beveled edge mirror of superior glass

17.31 (of approved quality) complete with 6 mm thick hard board ground fixed Each 98 ₹ 1,607.95 ₹ 157,579.10

to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 gms.

Providing and fixing low flow type two way bib tap as per approved

make complete in all respect as per engineer in the charge.

TOTAL CARRIED OVER TO SUMMARY ₹ 3,362,455.20 ₹ 3,597,170.00

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

TOTAL DSR Amount (in MR Rate MR Amount

DSR 2023 Description Unit DSR Rate (in Rs.)

QUANTITY Rs.) (in Rs.) (in Rs.)

INTERNAL & EXTERNAL WATER SUPPLY

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m

spacing. This includes jointing of pipes & fittings with one step CPVC

solvent cement and the cost of cutting chases and making good the same

including testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing the pipe with clamps at

1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as per direction of

Engineer in Charge.

Internal work - Exposed on wall

Derived 65mm nominal bore Mtr. 103.5 ₹ 1,125.00 ₹ 116,437.50

Derived 80mm nominal bore Mtr. 23 ₹ 1,467.00 ₹ 33,741.00

Derived 100mm nominal bore Mtr. 23 ₹ 1,990.00 ₹ 45,770.00

Providing and fixing gun metal gate valve with C.I. wheel of approved

quality (screwed end) :

Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete :

Derrived 32 mm nominal bore Each 12 ₹ 2,297.00 ₹ 27,564.00

Derrived 40 mm nominal bore Each 6 ₹ 2,297.00 ₹ 13,782.00

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

TOTAL DSR Amount (in MR Rate MR Amount

DSR 2023 Description Unit DSR Rate (in Rs.)

QUANTITY Rs.) (in Rs.) (in Rs.)

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6

rating with bronze/gunmetal seat duly ISI marked complete with nuts,

bolts, washers, gaskets conforming to IS 13095 of following sizes as

Providing and fixing motorized valve with sensor of approved quality, to

complete the work.

a) 40 mm dia ( Flushing Riser) Each 1 ₹ 34,879.00 ₹ 34,879.00

b) 50 mm dia ( Domestic Riser) Each 1 ₹ 35,424.00 ₹ 35,424.00

Providing and placing on terrace (at all floor levels) polyethylene water

storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet and overflow

pipes but without fittings and the base support for tank.

TOTAL CARRIED OVER TO SUMMARY ₹ 2,110,335.00 ₹ 307,597.50

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

TOTAL DSR Amount (in MR Rate MR Amount

DSR 2023 Description Unit DSR Rate (in Rs.)

QUANTITY Rs.) (in Rs.) (in Rs.)

SOIL, WASTE, VENT PIPES, RAIN WATER PIPES & FITTINGS.

Providing and fixing soil, waste and vent pipes

Supplying, Installation, Testing and Commissioning of uPVC pipes type -

B conforming to IS 13592 (1992) for soil, waste and vent pipes including

all fittings rubber ring type (plain or with access door) e.g. bends,

junctions, cowls, offsets, access pieces, jointing with rubber ring joints

with lubricant etc. fixed with clamps to walls with cement concrete 1:2:4

blocks complete in all respects. (For Soil & Waste Pipe)

Providing, laying, Jointing, Testing and commissioning of uPVC pressure

pipes of 6Kg/Sqcm pressure rating class 5 (IS : 4985-2000) including

fittings, tees, bends, clamps, coupling and adaptors supports, and jointing

with solvent joint, testing and necessary earth work in excavation,

backfilling, disposal of surplus earth with a lead upto 50m complete,

compaction and consolidation Including laying cement concrete 1:2:4

alround UPVC pipe including bed concrete and thrust blocks at bends as

per standard design (For Soil & Waste Pipe)

Supplying, Installation, Testing and Commissioning of uPVC, P or S trap

of self cleansing design with / without vent. arm Setting in cement

concrete 1:2:4 mix complete including cost of cutting & making good the

Wall / Floors wherever required.

Providing and fixing floor drain with jali size 110X50 size inlet and

MR-10 outlet including cutting and making good the walls and floors wherever

required complete in all respects.

Providing and fixing 125 mm dia, 3 mm thick Stainless steel grating

MR-11 with frame for floor traps or drains of required pattern including cutting

and making good the floors complete.

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

TOTAL DSR Amount (in MR Rate MR Amount

DSR 2023 Description Unit DSR Rate (in Rs.)

QUANTITY Rs.) (in Rs.) (in Rs.)

Providing and fixing cast brass Cleanout plug with suitable insert keys

for opening in brass cap, male threaded joint/reducer with G.I. socket

caulked to Pipe/fittings of CI pipe including cost of lead joints etc.

complete in all respect.

Making khurras 45x45 cm with average minimum thickness of 5 cm

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate

of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished

with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of

neat cement, rounding the edges and making and finishing the outlet

complete.450 X 450mm -

Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)

Single socketed pipes.

Derived 160 mm diameter (with all fittings) Metre 324.3 ₹ 1,350.00 ₹ 437,805.00

Providing and fixing to the inlet mouth of rain water pipe cast iron grating

15 cm diameter and weighing not less than 440 grams.

TOTAL CARRIED OVER TO SUMMARY ₹ 5,647.20 ₹ 1,440,782.70

EXTERNAL SEWERAGE AND STORM WATER DRAINAGE

Making connection of drain or sewer line with existing manhole

including breaking into and making good the walls, floors with cement

concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size) cement plastered on both sides with cement mortar 1:3

(1 cement : 3 coarse sand), finished with a floating coat of neat cement and

making necessary channels for the drain etc. complete :

19.21.2 For pipes 250 to 300 mm diameter Each 10 ₹ 922.40 ₹ 9,224.00

19.21.3 For pipes 350 to 450 mm diameter Each 10 ₹ 1,328.45 ₹ 13,284.50

TOTAL CARRIED TO SUMMARY ₹ 22,508.50

Digitally signed by VARUN

NATIONAL LAW UNIVERSITY AT DWARKA

Project Name:-NEW CAMPUS OF COLLEGE OF HORTICULTURE AT MORENA

SUB HEAD DESCRIPTION AMOUNT DSR AMOUNT NDSR

SUB HEAD -1.0 PIPING, HYDRANT , SPRINKLER AND ACCESSORIES SYSTEM FOR

B SUB HEAD-2.0 FIRE FIGHTING PUMPS ₹ 1,075,869.00 ₹ 0.00

GRAND TOTAL FOR DSR AND NON DSR ₹ 7,582,877.13

GRAND TOTAL FOR DSR AND NON DSR ₹ 7,582,877.13

Digitally signed byFighting

NATIONAL LAW UNIVERSITY AT DWARKA

Project Name:-NEW CAMPUS OF COLLEGE OF HORTICULTURE AT MORENA

FIRE FIGHTING ESTIMATE

ITEM CODE NO. DSR 2025 FF

S.NO. DESCRIPTION OF ITEMS TOTAL QUANTITY UNIT

WORKS DSR 2025 NDSR DSR NDSR

A. SUB HEAD -1.0 PIPING, HYDRANT , SPRINKLER AND ACCESSORIES

SYSTEM FOR BUILDINGS

1 27.6 Providing Laying Testing and Commissioning of C class Heavy duty MS

Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees ,

flanges , tapers , nuts , bolts , gaskets etc in ground including welding

excavation and Providing cement concrete blocks as supports

anticorrosive treatment with coaltar / asphalts tape as per IS :10221

refilling the trench etc of following sizes complete as required .

2 27.7 Providing Laying Testing and Commissioning of C class Heavy duty MS

Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees ,

flanges , tapers , nuts , bolts , gaskets etc and fixing the pipe on the wall /

ceiling with suitable clamp / support frame and painting with two or more

coats of synthetic enamel paint of required shade complete as required .

3 27.9 Supplying and Fixing Single Headed Internal Hydrant Valve with

instantaneous gunmetal coupling of 63 mm dia with cast iron wheel ISI

marked conforming to IS : 5290 ( Type A ) with blank gunmetal material

cap and chain as required .

3.1 27.9.1 Single Headed Gunmetal Material 10 Set ₹ 8,208.00 ₹ 82,080.00

4 27.10 Supplying and Fixing Single Headed External Yard Hydrant Valve with 1

Nos 63 mm dia instantaneous female Gunmetal material Coupling and

cast iron wheel ISI marked Conforming to IS : 5290 ( Type A ) with blank

stainless steel cap and chain as required .

4.1 27.10.1 Single Headed Gunmetal Material 6 Set ₹ 8,208.00 ₹ 49,248.00

5 27.11 Supplying Fixing Testing and Commissioning of butterfly valve of PN 1.6

Rating with Bronze Gunmetal Sheet duly ISI marked complete with nuts ,

bolts , washers , gaskets conforming to IS : 13095 of following sizes as

SQ - 2 Digitally signed by VARUN

Fire Fighting - Internal

NATIONAL LAW UNIVERSITY AT DWARKA

ITEM CODE NO. DSR 2025 FF

S.NO. DESCRIPTION OF ITEMS TOTAL QUANTITY UNIT

WORKS DSR 2025 NDSR DSR NDSR

6 27.13 Supplying and Fixing orifice plate made out of 6 mm thick stainless steel (

Grade 304 ) with orifice of required size to be fitted between flange and

landing valve of external and internal hydrants to reduce pressure at the ₹ 14,360.00

outlet to the level of 3.5 kg / sqcm complete as required .

7 27.14 Providing Installation Testing and Commissioning of Non Return Valve of

following sizes conforming to IS : 5312 complete with rubber gasket , GI

Bolts , Nuts , washers etc as required .

8 27.15 Providing Installation Testing and Commissioning of stainless steel y-

strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet

with 3mm dia holes with stainless steel flange.

9 27.16 Supplying and Fixing 63 mm dia 15 m Long RRL Hose pipe with 63 mm dia

male and female coupling duly bound with GI wire , rivet etc . Conforming

to IS : 636 ( Type A ) as Required .

10 27.17 Supplying and Fixing First aid hose reel with MS Construction Spray

painted in Post office red conforming to IS : 884 complete with the

following as required

20 mm nominal internal dia water hose thermoplastic ( Textile Reinforced

) Type - 2 as per IS : 12585

20 mm nominal internal dia gunmetal globe valve and nozzle

Drum and Brackets for fixing the equipments on wall

Connections from Riser with 25 mm dia stop gunmetal valve and MS Pipe

11 27.18 Supplying and Fixing 63 mm dia Gunmetal Material Short Branch Pipe

with 20 mm nominal internal diameter size nozzle conforming to IS : 903

suitable for instantaneous connection to interconnect hose pipe coupling

12 27.19 Supplying and Fixing of Fire brigade connection of Cast iron body with

gunmetal male intantaneous inlet coupling complete with cap and chain

as required for suitable dia ms pipe connection conforming to IS : 904 as

SQ - 3 Digitally signed by VARUN

Fire Fighting - Internal

NATIONAL LAW UNIVERSITY AT DWARKA

ITEM CODE NO. DSR 2025 FF

S.NO. DESCRIPTION OF ITEMS TOTAL QUANTITY UNIT

WORKS DSR 2025 NDSR DSR NDSR

13 27.20 Supplying and Fixing Air Vessel made of 250 mm dia 8 mm thick ms sheet

1200 mm in height with air release valve on top and flanged connection to

riser drain arrangement with 25 mm dia gunmetal wheel valve with

required accessories pressure gauge and painting with synthetic enamel ₹ 19,402.00

paint of approved shade as required

14 27.21 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb

type sprinklers of rating 68 degree centigrade with required accessories :

14.1 27.21.1 Pendent Sprinkler 667 Each ₹ 599.00 ₹ 399,533.00

15 27.22 Providing and fixing of pressure switches in MS pipe line including connection extra as required.

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non

rising spindle, bronze/gun metal seat, ISI] marked complete with nuts, bolts, washers, gaskets and

conforming to IS 780 of following sizes as required :

27.25 Supplying, installation, testing & commissioning of sprinkler flexible pipe

stainless steel complete with 15 NPT on reducer thread with maximum

working pressure of

175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT

sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2

side brackets, center

bracket, stockbar of following sizes complete as required

27.29 Providing,installation,testing&commissioning of adjustable rosette plate 667 Each

for15mm dia in white finish UL Listed or FM approved complete as ₹ 264.00 ₹ 176,088.00

17 NS-1 Providing and fixing of Fire Hose Cabinet size not less than 2.1 x 1.2 x 0.90

mtr made out of M.S. sheet not less than 1.5 mm thick having central

opening and 4 mm thick glazed glass doors (Two nos.) suitably marked

on the outside 'with the letters "FIRE HOSE" including necessary locking

arrangement and painting in PO red colour suitable to accommodate,

internal hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe, nozzle

and fire man's axe. It shall be fixed inside the FHC Cabinet Complete as

18 NS-2 Providing and fixing standard firemans axe with heavy rubber handle.

SQ - 4 Digitally signed by VARUN

Fire Fighting - Internal

NATIONAL LAW UNIVERSITY AT DWARKA

ITEM CODE NO. DSR 2025 FF

S.NO. DESCRIPTION OF ITEMS TOTAL QUANTITY UNIT

WORKS DSR 2025 NDSR DSR NDSR

19 NS-3 Providing and fixing dial type pressure gauge with isolation cock and

copper pipe on main header Dial diameter 100 mm celebration 0-16 / sq.

20 NS-4 Providing and fixing Fire Extinguishers (CO2 type powder ) 4.5 Kg

Capacity complete with all accessories as per manufacturers

specifications. 20 Each ₹ 5,625.85 ₹ 112,516.94

21 NS-5 Providing and fixing Fire Extinguishers (A, B, C type powder ) 6 Kg

Capacity complete with all accessories as per manufacturers

specifications. 20 Each ₹ 2,649.65 ₹ 52,993.09

22 NS-6 Providing and fixing Fire Extinguishers (A, B, C type powder ) 9 Kg

Capacity complete with all accessories as per manufacturers

specifications. 20 Each ₹ 3,203.36 ₹ 64,067.29

24 NS-8 Providing and fixing Fe 36 modular Fire Extinguishers 10 Kg Capacity

complete with all accessories as per manufacturers specifications.

TOTAL CARRIED TO SUMMARY SHEET FOR SUB HEAD A ₹ 6,007,337.14 ₹ 499,670.99

SUB HEAD-2.0 FIRE FIGHTING PUMPS

1 27.1 Supplying, installation, testing and commissioning of Electric driven Main

Fire Pump suitable for automatic operation and consisting of following,

complete in all respects, as required :

(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron

body & bronze impeller with stainless steel shaft, mechanical seal

conforming to IS 1520.

(b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500

RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP

55 protection for enclosure, horizontal foot mounted type with Class-'F'

insulation, conforming to IS-325.

(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation

bolts etc. as required.

(d) Suitable cement concrete foundation duly plastered with anti vibration

Note: *The head of the pump is selected in a manner so as to give a

minimum 3.5kgf/cm2 pressure at the highest/farthest point.

2 27.2 Supplying, installation, testing and commissioning of diesel engine driven

main fire pump suitable for automatic operation and consisting of

following, complete in all respects, as required : (Diesel Driven Pump)

(a) Horizontal type, multistage, centrifugal pump of cast of iron body and

bronze impeller with stainless steel shaft, mechanical seal conforming to

(b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine

conforming to relevant IS standard complete with auto starting

mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust

pipe extended upto 10 m outside pump house duly insulated with 50 mm

thick glass wool with 1.0 mm thick aluminium sheet cladding, residential

silencer, instruments and protection as per standard specification, stop

solenoid for auto stop in the event of fault with audio indications, painted

with post office red colour etc. as required.

(c) M.S fabricated, common base plate, coupling, coupling guard, foundation

bolts etc. as required.

SQ - 5 Digitally signed by VARUN

Fire Fighting - Internal

NATIONAL LAW UNIVERSITY AT DWARKA

ITEM CODE NO. DSR 2025 FF

S.NO. DESCRIPTION OF ITEMS TOTAL QUANTITY UNIT

WORKS DSR 2025 NDSR DSR NDSR

Suitable cement concrete foundation duly plastered with anti vibration

Note: *The head of the pump is selected in a manner so as to give a

minimum 3.5kgf/cm2 pressure at the highest/farthest point.

3 27.3 Supplying, installation, testing and commissioning of electric driven

pressurisation pump suitable for automatic operation and consisting of

following, complete in all respects, as required : (Jockey Pump).

(a) Horizontal type, multistage, centrifugal split casing pump of cast iron

body and bronze impeller with stainless steel shaft, mechanical seal

conforming to IS : 1520.

(b) Suitable HP squirell cage induction motor TEFC type suitable for operation

on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for

enclosure, horizontal foot mounted type with Class-'F' insulation,

conforming to IS : 325.

(c) M.S.fabricated Common base plate, coupling, coupling guard, foundation

bolts etc. as required.

(d) Suitable cement concrete foundation duly plastered and with anti

vibration pads.

TOTAL CARRIED TO SUMMARY SHEET FOR SUB HEAD A ₹ 1,075,869.00 ₹ 0.00

SQ - 6 Digitally signed by VARUN

Fire Fighting - Internal

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

PROJECT :- PROPOSED COLLEGE OF HORTICULTURE AT MORENA (M.P.)

BUILDING NAME : ADMIN CUM ACDEMIC BLOCK

SUMMARY OF COST_HVAC WORKS

S. No. Description

1) Sub Head-'A'- HVAC EQUIPMENTS ₹ 2,590,462.00 ₹ 1,417,943.75

2) Total of Sub Head 'B'- Piping ₹ 394,825.00 ₹ 480,411.37

3) Total of Sub Head-'C'- Air Distribution ₹ 4,809,705.00 ₹ 1,305,722.85

4) Total of Sub-Head-'D'-"Electrical (In HVAC Scope)" ₹ 407,286.00 ₹ 1,238,814.84

5) Sub Head-'E'- Split AC ₹ 344,214.00 ₹ 0.00

TOTAL (HVAC ) ₹ 12,989,384.82

Digitally signed by VARUN

ADMIN CUM ACADEMIC BLOCK COLLEGE OF HORTICULTURE, MORENA

PROJECT :- PROPOSED COLLEGE OF HORTICULTURE AT MORENA (M.P.)

BUILDING NAME : ADMIN CUM ACDEMIC BLOCK

BILL OF QUATITIES_HVAC WORKS

DSR 2025 DSR AMOUNT NSR AMOUNT

S.NO. DESCRIPTION OF ITEM UNIT QUANTITY NS RATE

RATE (IN RS.) (IN RS.)

DSR-31.3 Variable Refrigerant Volume / Flow Air-conditioning System (Heating & Cooling both)

Supply, Installation, Testing & Commissioning of Modular type Variable Refrigerant

Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling/heating having

100% hermetically sealed inverter type Compressor(s),microprocessor based Controller, top

discharge type condensing unit(s), with R-410-A Refrigerant or equivalent, vibration Isolators with

suitable foundation etc. complete as required. To have better efficiency condenser fan shall be

capable to operate at different speed with respect to load. The unit shall deliver the rated

capacity and in confirmation as per IS 18728:2024 and CPWD Specifications and work even at

50°C ambient temperature without tripping. The system shall be able to deliver 100% of the rated

capacity upto 39 Degree Celcius.The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz

AC power supply and BMS compatible. The unit shall be filled with first charge of the refrigerant

and ready for use as required. The condenser should be coated with a hydrophilic film to prevent

water accumulation on the surface of the heat exchanger, enhance water dispersion, and reduce the

risk of degradation, thereby improving overall performance and durability and complete as per

CPWD specification, connections, inter connections etc. as required.

For Cooling or Heating Both

Supply, Installation, Testing and Commissioning of following minimum capacity 4 way Cassette Type

Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low

noise fan / dynamically balanced blower, multispeed motor, coil section with DX Copper coil,

electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration Isolation,

DSR-31.4 Corded remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply,

complete, as required. The Indoor units must shut down upon receiving a singal from the BMS

System/Fire Signals. The system shall be capable to adjust air flow as per room requirement in auto

mode. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19

Degree C WB temperature. (Make will be same as of Outdoor)