Constt of community hall at Mukdal Ward no 04 under B2V3

Amount

E/work in excavation in foundation trenches (Not exceeding 1.5 m in width as well as 10 sqm on plain) including dressing of sides & ramming of bottoms, lift up to 1.5m, including getting out the excavated soil. In all kinds of soil.

Providing and laying in position cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:5:10(1 cement:5 coarse sand:10 garded stone )40 mm nominal size (including carriage of material)

Providing and laying in position cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:3:6(1 cement:3 coarse sand:6 garded stone )40 mm nominal size ( including carriage of material)

Brick work witk common burnt clay ( non- modular) bricks of class designation 7.5 in foundation and plinth inclluding curing in cement mortar 1:6(1 cement: 6 coarse sand) (including carriage of material)

Extra for brick work withj commom burnt clay bricks / cememt concrete bricks in super structure above plinth level up to floor five level

Reinforced cement concrete work in beams, suspended floors , roofs havingslpoes up tp 15degree landing balconies shelves, chajjas ,lintels,bands,plain window sills , stair cases and spiral stair cases up to five level including curing but excluding the cost of centring, shuttering , finishing and reinforcement with 1:1.5:3(1 cement:1.5 coarse sand:3garded stone )20 mm nominal size (including carriage of material)

Steel reinforcement for RSS work including starighting, cutting, bending , placing in position and binding all complete (including carriage of material)

cold twisted bars

Providing and laying in position cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:2:4 (1 cement:2 coarse sand:4 garded stone )40 mm nominal size ( including carriage of material)

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand: 6 graded stone agg.) 20 mm nominal size over 75 mm bed of dry brick blast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth

Filling available exacvated earth ( excluding rock) in trenches , plinth, sides of foundation etc not exceeding 20 cm in depth , consloidation each deposited layer by ramming and watering lead up to 50 m and lift up to 1.5 m

Supplying and filling in plinth with fine sand under floors including watering , ramming , consolidating and dressing complete

12 mm cement plaster of mix1:6(1 cement :6 coarse sand)

15 mm cement plaster of mix1:4(1 cement :4 coarse sand)

6 mm cement plaster of mix1:3(1 cement :3 coarse sand)

Centring and shuttermg including strutting, propping etc. and removal of formwork for·

Foundations, footings, bases of columns etc. for mass concrete.

Suspended floors, roofs , landing , balconies and access platfarm

columns, pillars, ,piers, abutments, posts and struts

Lintel, Beams, plinth beams girders, bressumers and cantiliver

Edges of slab below 20 mm size

Providing wood work in frame of doors, windows,clerestory windows and other frames rot framed and fixed in position with hold fast lugsare with dash fasteners of required dia and length ( hold fast lugs are dash fastener shall be paid for seperately)

2nd class deodar wood

Providing and fixing 30 mm thick panelled or panelled and wire gaugedhutters for doors, windows and clerestory windows including black enamelled M.S. but hinges with necessary screws excluding, panelling which will be paid for separately. Second class deodar wood.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured).Panelling for pannelled or panelled and glazed shutters 25 mm to 40 mm thick. Particle board 12 mm thick. Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows with butt hinges of required size with necessary screws excluding peanelling which will be paid seperately all complete as per direction of engineer in charge 2nd class deodar wood 30 mm

Providing & fixing of float glass panes 4 mm thick glass pane (weight not less than 10 kg / sqm)

Distempering with oil bound washable distemper of approved brand & manfacture to give even shade on new work two or more coats over and including priming coat with water thinable cement primer

Finishing walls with waterproofing cement paint of required shade on new work (two or more coats with water thinable cement )

Painting with synthetic enamel paint of approved brand and manfacture to give even shade on new work

Providing & fixing in position M.S. grills of required pattern in frames of windows etc with flats, sq. or round bars etc incl priming coat all complete. Fixed to openings / wooded frames with rawl plugs, screws etc.

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Providing and fixing ISI marked oxidized casements stays with necessary screws etc. complete:

Providing & fixing alminium hanging floor door stopper ISI marked anodized ( anodic coating not less than grade 10 as per ISI 1868) transparent or dyed to required colour & shade twin rubber stopper

Providing & fixing 40x5 mm iron hold fast 40 cm long including fixing to frame withj 10 dia bolts nuts and wooden plungs & embedding in cement concrete block 30x10x15 cm (1:3:6 cement concrete)max size oif aggregate 20 mm

Providing & fixing wooden moulded beading to door and windows frames with iron screws 50x12mm 2nd class deodar wood

Providing and fixing of vetrified floor tiles in different sizes (thickness to be specified by the manfacturer) with water absorpition less than 0.08% and conforming to IS 15622 of approved make in all colour and shade on 20 mm thick cement motar (1:4) all complete 600x600 mm

Providing and fixing of vetrified floor tiles in different sizes (thickness to be specified by the manfacturer) with water absorpition less than 0.08% and conforming to IS 15622 of approved make in all colour and shade in skirting and risers on12 mm thick cement motar (1:3) all complete 600x600 mm

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Wiring light points / fan point /exhaust point with 1.5 sqm mm frlv PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with paino type switch ,phenolic ,laminated sheet ,suitable size MS box and earthing the point with 1.5 Sqm FRLS PVC insulated copper conductor single core cable etc

Wiring for light / power plug with 2x4 sqm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class pvc conduit along with 1 no 4 sqm FLRS `PVC insulated copper conductor single core cable loop earthing as required

Wiring for circuit/ sub main wiring along with earth wiring with the following sizes of FLRS PVC insulated copper conductor single core cable in surface /recessed medium class Pvc conduit as required

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Refer CPWD DSR E&M 2018 Item No. 1.24).

5/6 A switch (1.24.1)

5/6 A socket 3 pin

Supply and fixing folowwing way single pole neutral steel sheet MCB distribution 240 v on surface/ recess complete with tinned copper bus bar earth war din bar interconnection powder painted including earthing etc as required 6 way double door

Supply of LED batten 9 watt.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Ceiling Fan 1400 mm Sweep

Providing and fixing of 4 mm dia copper wire on surface or in recess for loop earthing not existing surface / recessed conduit /sub main wiring cables as required

Providing and fixing of GI fittings & clamp including cutting & making the walls etc internal work exposed on wall

15 mm dia bore

20 mm dia bore

Providing and fixing of GI union including cutting & making the thread and long screws etc complete new work

15 mm dia bore

20 mm dia bore

Providing & fixing white vitrous china washbashin with CI / MS bracket /15 mm CP brass pillar trap 32 mm CP brass waste standard pattern including painting with all fittings and brackets complete including & making good the walls & floors whereever white viterous china size (630x450mm) with pairs of 15 mm CP brass pillar trap required (make cera or equivalent)

Providing & fixing white vitrous china pedestal type water closet (european type wc pan ) with seat lid 10 litre low level pipe with manually controlled device conforming to IS 7231 with all fittings and brackets complete including & making good the walls & floors whereever required (make cera or equivalent)

Providing & fixing of CP brass bib cock of approved quality 15 mm nominal bore complete job (make jaguar /cera /equivalent)

Long Nose

Short Nose

Providing & fixing CP brass angle valve for basin mixer or gyser points of approved make conforming to IS 8931 15 mm nominal bore complete job

Providing & fixing 110 mm dia PVC water waste water / sewerage pipe of 4 kg pressure per sqm of supreme/prince/finox make parkash surya

Providing & fixing in position complete PVC floor trap of supreme / prince make 110/75 dia

Providing and fixing PVC bend 110 mm dia

Providing and fixing waste pipes for sink or washbasin including Pvc waste fittings complete flexible pipe 32 mm dia

Providing & fixing plain Pvc soil waste pipe & vent pipe 75 mm dia

Providing & fixing unplasticised PVC connection pipes with brass union 30 cm long 15 mm nominal bore

Providing & fixing 8 mm CP/SS jet with flexible tube upto 1 mts long with SS triangular plate eropean type wc of app quality & make as desired by enginner in charge

Providing and fixing of Motar pump of 1/2 hp of sharp bajaj or equivalent make including fittings complete

Providing and placing on tarrace floor level polythene water storage tank IS 12701 marked indicating the bis no with cover & suitable locking arrangements and making the necessary holesfor inlet & outlet overflow pipes including fittings &the base part for tanks syntax electroplastic ,star ,lotous or equivalent having ISI make

cement from an av lead of 8.00 km MT and 50 Mts H\L

Sand ,bajri, aggrregate 28.00 km MT and 50 Mts H\L

Brick from an av lead of 60 km MT and 50 Mts H\L

Add cost of sign board including painting and writing complete job

M/S MADAN LAL GUPTA GOVT CONTRACTOR

Mansotra