S and I Airconditioner

Amount

Supply & Delivery of Microprocessor based air cooled 4.0 TR Ceiling Suspended Concealed type Split Air Conditioner with R-410A Gas, having nominal cooling capacity of 42650 BTU/Hr. With single/multiple scroll compressor, Power Input: (3700-4000) condenser make as per OEM standard, Noise Level not more than 50 dB,Air Flow 2200CMH suitable for operation on 415 Volt. +/- 5%,50 HZ, - 3Ph. AC supply. (Make :- Daikin / O-General / Hitachi).

Supply & Fixing of INDOOR UNIT Frame work with suitable hanging or grouting arrangement with M.S angle (40 x 40 x 6 mm) / MS down rod 8 mm dia along with necessary customization according to the requirement and as per the direction of EIC.

Supply & Fixing of OUTDOOR UNIT Frame work with suitable hanging or grouting arrangement with M.S angle (40 x 40 x 6 mm) / MS down rod 8 mm dia along with necessary customization according to the requirement and as per the direction of EIC.

Installation & Commissioning charges for 4.0 TR Suspended Ductable type Split Air Conditioner including making proper arrangements for leak testing with necessary pressure.

Supply & Delivery of 2.0TR capacity R410A Refrigerant Gas concealed type Split Air Conditioner of rated cooling capacity of 24000 BTU/hr. with 1No. Rotary compressor, 1no. IDU and 1no. ODU of rated power supply of 230V, 1ph, 50Hz. Air-flow/per IDU:- 800CFM. (Make: Hitachi / Mitshubishi)

Supply, fabrication & fixing of 2 Nos. M.S Equal Angle of 6mm thick of Size (40mm X 40mm) of 1 mtr length for making platform for installation of outdoor unit of 2.0 TR concealed type Split Air Conditioner incl. drilling 2nos hole in each channel including making necessary arrangement as per site condition as per direction of EIC.

Installation & Commissioning Charges for 2.0TR concealed type Split Air Conditioner on suitable iron framework & mending good the damages.

Supply & Laying of Refrigerent Copper pipe (Make: Rajco/ Royko/Mandev) of following diameter for connecting Indoor and Outdoor unit, complete with fittings, elbows, bends, supporting arrangement along with 9 mm thick closed cell elastomeric nitrile rubber drip resistant insulating foam (Make: Armacell / K Flex / Vedio Flex) with double insulating wrapping tape:

5/8" dia, min. thickness 0.9 mm with 9 mm thick nitrile insulation.

3/8" dia, min. thickness 0.9 mm with 9mm thick nitrile insulation.

1/4" dia, min. thickness 0.9 mm with 9mm thick nitrile insulation.

SITC of Discrite Powder Coaed Al. Grill without VCD with fittings & accessories as per the specification suitable size for the cooling unit of 4 Tr concealed split AC (Make: Ravi Star / Dynacraft / Caryair).

Supply & Laying of PVC insulated unarmoured 1.1 KV grade 4 Core 4 sq mm copper flexible cable ( Finolex / Havells / Polycab ) from indoor to outdoor unit with necessary fixing arrangement .

Supply and laying of PVC insulated unarmoured 1.1 kV grade 3 Core 2.5 sq.mm Cu flexible wire from indoor to outdoor unit with necessary fixing arrangement ( Finolex / Havells / Polycab )

Supply & Fixing of extruded aluminium powder coated supply air grills & diffuser without VCD with fittings & accessories as per the specification suitable size for the cooling unit of 2 Tr concealed split AC (Make: Ravi Star / Dynacraft / Caryair).

S & F Fire redendent Flexible double canvass connections in the mouth of the air-conditioners.

Supply & laying drain Water piping work with 25 mm dia UPVC/ HDPE hard pipes (Reputed make) incl. bends, elbows, tees, supports on wall etc. insulated with 9mm. thick nitrile rubber tube insulation.

Supply and Charging of R 410A / R 32 - Refrigeration Gas to commissioning the above Air Conditioning Units.

Lifting Charges for Indoor & Outdoor units after making scaffolding arrangement as required.

Supplying, fitting & fixing drop ceiling with frame work of aluminium hollow section of size 50mm X 25mm (2.0mm thickness) combined with aluminium corners of size 38mm X 25mm, suspended by aluminium hollow tube section of size 38mm X 25mm having size of 600mm X 600mm ceiling with aluminium composit panels (ACP) - Interior grade of thickness 3.0mm comprising of proctective film, polyester coating, primer, adhesive film, polyethylene core again with one layer adhesive film, aluminium bottom coating and finally service coating as per manufacturer's specification finished with aluminium screw and silicon sealent complete in all respect including all incidental charges etc. as per direction of Engineer-in-charge.

Terms and condition

Special Terms and Conditions 1. It is stated that the above work place is existing COVID Hospital. In case of any mishap or accidental to any staff that deputed by the agency the whole responsibility is to be borne by the concern agency. 2. The Agency shall be responsible for provisioning of all COVID safety measures including regular sanitization of work places, vaccination of employees and compliance of stated directive and COVID appropriate norms. 3. All the issues related to the safety of the staffs should be taken care by the agnecy itself.

The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them.

Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/submission of bill.

If any refurbished material is supplied and installed, penal action will be taken as per existing rules

Defect Liability period 1 (One) Year

Lyric International

Auto-Tech Projects Pvt.Ltd.