Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.8 LAccepted-AOC WARD NO 07 WARD NO 07 THANA PARA NALHATI BIRBHUM WEST BENGAL 731243 | BIRBHUM | WEST BENGAL | 731243 | L1 | Accepted-AOC REASONABLE | |
| 2 | L2₹9.6 L+₹57,171.91 (6.30%)Rejected-Finance | L2 | Rejected-Finance HIGH RATE | |
| 3 | L3₹10.1 L+₹1.0 L (11.3%)Rejected-Finance | L3 | Rejected-Finance HIGH RATE | |
| 4 | L4₹10.2 L+₹1.1 L (12.1%)Rejected-Finance | L4 | Rejected-Finance HIGH RATE | |
| 5 | L5₹10.2 L+₹1.1 L (12.2%)Rejected-Finance | L5 | Rejected-Finance HIGH RATE |
Tender Value
₹9 L
EMD Value
₹18,000
Closing Date
29 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI TAPAN DAS AGE I
AGE I AF SINGARSI
REPAIR TO COOK HOUSE DINNING HALL AND OTHER MISC WORKS TO OTM ACCN AT AF STN SINGARSI UNDER AGE I AF SINGARSI
2023_MES_607130_1
C/8618/E8
Open Tender
Civil Works
Item Rate
270 days
AGE I AF SINGARSI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
AGE I AF SINGARSI
₹18,000
Yes
6 Sept 2023
30 Jun 2023
5 Aug 2023
30 Jun 2023
29 Jul 2023
15 Jul 2023
Amount
S&F in repair for galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, (each line to be wire measured) complete all as specified and as directed.
Supply and fix in repair galvenised Concertina coil (reinforced punch barbed tape single layer of 600mm dia and 75mm aperture straining (weight n. less than 1.40 kg /Rm) and fixed on Y shaped angle iron over security wall with and including necessary clip (not less than125 clip for each bundel of coil) for securing, complete all as specified and as directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance n.exc 50m at low lying area, complete all as specified and as directed.
M&L for 100mm thick cement concrete (1:2:4) type B-1 ( using 20mm graded agg.) as in floor finishing cement concrete surface even and smooth without using extra cement, complete all as specified and as directed.
M&L for 75mm thick cement concrete (1:3:6) type C-2 ( using 20mm graded agg.) as in floor finishing/Plinth protection cement concrete,complete all as specified and as directed.
M&L for 40mm thick cement concrete (1:2:4) type B-1 ( using 20mm graded agg.) as in subbase/below the tiles,complete all as specified and as directed.
M&L for PCC 1:4:8 Type D-2 ( using 40mm graded agg.) as in foundation , filling and mass concrete,complete all as specified and as directed.
M&L for PCC 1:2:4(Nominal mix)(using 20mm gradded aggregate) type B1 using stone aggregate as in coping benching,complete all as specified and as directed by Engr-in-Charge.
Demolition of reinforced cement concrete in any position (reinforcement cut as required to facilitate demolition) and removing rubbish to a distance 50m at low lying area,complete all as specified and as directed.
M&L for pre-cast RCC 1:2:4 Type B1 using 20mm gradded stone aggregate as in manhole cover/Drain cover slab and setting in CM (1:6),complete all as specified and as directed.
M&L for RCC (nominal mix) Type B1(1:2:4) (using 20mm gradded stone aggregate) as in beams and lintels above1.50m clear span etc,complete all as specified and as directed.
M&L for reinforced cement concrete nominal mix type B1 (1:2:4) using 20 mm graded stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed.
M&L for Use and waste for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping),complete all as specified and as directed.
M&L for Use and waste for Formwork to side and soffits of floor or roof beams,lintels etc flat for fair finished surfaces,complete all as specified and as directed.
S&F mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clip and confirming to grade Fe-410-W(Gde-250),complete all as specified and as directed.
all as per iten no. 15 but 5mm dia and over upto and incl. 10mm dia in stirrups spacers and binders.
M&L for Providing precast cement concrete 1:3:6 Type C0 (12.5mm gradded aggregate) louvres and jallies, 25mm thick (measured solid), including all mould- ings setting in CM (1:6),complete all as specified and as directed.
Demolition of Stone slabs and tiles laid, bedded and pointed in any mortar any description or thickness in floors, aprons etc,complete all as specified and as directed.
M&L for liquior finish/glossy finish chequered cement concrete tiles 20cm x 20cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors using white cement and pigments including 15mm thick screed bed in CM 1:6etc (as in patches and as per site condition) as per design/pattern approved by AGE(I) etc complete all as specified and directed by Engr-in-Charge..
M&L for liquior finish/glossy finish Machine pressed precast concrete interlocking paver block rubber moulded laid with Grey cement and pigment any size and shape conforming to IS 15658-2006 of 60mm thick M-35grade over and including 50 thick sand cushion etc, complete all as specified and directed by Engr-in-Charge.
M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm cement screed base laid in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed by Engr-in-Charge.
M&L for Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with over 15mm cement screed base laid in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed by Engr-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for,complete all as specified and directed by Engr-in-Charge.
S&F Mild steel framed work as in grills, with ends of bars shouldered work conforming to Fe-410-0 as per existing grills at site, complete all as specified and directed by Engr-in-Charge.
Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles,complete all as specified and as directed.
M&L for brick work with sub class 'B' old size brick straight or curved on plan exc 6m mean radius built in cement mortar (1:6),complete all as specified and as directed.
M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar1:6,complete all as specified and as directed.
All as per item no-27 except stone,complete all as specified and as directed.
Extra over stone walling for hammer (granite or trap stone) dressing to face of stone wall and dressing of faces, beds and joint with maximum depression on face from straight edge held against the dressed surfaces n. exc. 20mm all as specified,complete all as specified and as directed.
Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses edge in floors, surface channels, roofs, etc,complete all as specified and as directed.
M&L Raised pointing to random or polygonal rubble,With cement mortar (1:4) uncoursed or brought upto courses,complete all as specified and as directed.
Taking down cement plaster of any description on brick or stone walls, Chajjas etc., including raking out joints, hacking for key, scrubbing down with water etc,complete all as specified and as directed.
Material & Labour for 15mm thick rendering in Cement Mortar 1:6 on stone masonry surfaces, finished even and smooth without using any extra cement, complete all as specified and as directed.
Material & Labour for 15mm thick rendering in Cement Mortar 1:6 on brick work or concrete surfaces, finished even and smooth without using any extra cement, complete all as specified and as directed.
M&L for preparation of new surface and and applying two coats of cement base paint over a coat of white cement primer on walls,complete all as specified and as directed.
M&L for two coats of oil bound distempering over a coat of priming plastered and other surfaces with alkali-resistant priming paint on newly plastered surfaces of wall including preparation of surface,complete all as specified and as directed.
M&L for Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of Cement based paint on old prepared surfaces of walls, complete all as specified and directed by Engineer-in-Charge.
Material & Labour for Preparation of old surface on walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed by Engineer-in-Charge.
M&L preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and apply two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engineer-in-Charge.
Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets,complete all as specifed and as directed.
Material and labour for 7 to 9 mm thick Pre painted gypsum building boards of size 595 x 595mm PVC laminated at back side of board insulation & acoustic purpose flat in ceiling fixed .NOTE: (The rate inclusive of scaffolding and necessary arrangements ( ht of building shall be up to 10m ), complete all as specified and directed by Engineer-in-Charge.
S&F in repair Anodised aluminium snap grid frame work for false ceiling all as specified . NOTE: (The rate inclusive of scaffolding and necessary arrangements), complete all as specified and directed by Engineer-in-Charge.
S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long,complete all as specifed and as directed. NOTE: (The rate inclusive of scaffolding and necessary arrangements).
Taking down chowkats or frames with shutters n.exc 1.50Sqm (without taking off shutters from the frames),complete all as specifed and as directed.
All as per serial item No. 44 above but exc 1.50 Sqm and n.exc 4 Sqm each,complete all as specifed and as directed.
Taking down shutters exc 1 Sqm but n.exc 2 Sqm each,complete all as specifed and as directed.
S&F 2nd class hard wood 35mm thick factory made skeleton shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc,complete all as specifed and as directed.
S&F 2nd class hard wood 35 mm thick factory made paneled door shutter ( two pannel) factory made with lock rail and panel of 9 mm thick BWP commercial ply or 12 veneered particle board with commercial veneering on both faces , the size of rail and style as per IS 1003 (part-I) klin seasoned and chamically treated,complete all as specifed and as directed.
S&F 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints,complete all as specifed and as directed.
S&F MS butt hinges 100mm size, medium weight cold rolled mild steel, complete all as specifed and as directed.
S&F 150 mm length aluminum, anodised, barrel tower bolts of extruded section,complete all as specifed and as directed.
S&F 125 mm size of aluminum handles, cast type anodised,complete all as specifed and as directed.
S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy,complete all as specifed and as directed.
S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate,complete all as specifed and as directed.
S&F MS flat iron hold fasts fixed to chowkats confirming to Fe-310-O etc, complete all as specified and as directed.
M&L PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in hold fast block, including form work,complete all as specified and as directed.
S&F 150mm floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 40mm longs,complete all as specified and as directed.
M&L for two coat of enamel paint(First quality) over a coat of pink primer on new wooden surface including preparation of surface, over 10Cm width or girth,complete all as specified and as directed.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm, complete all as specified and as directed.
S&F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed..
S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.
S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). Mild steel hinges type B-21 100mm long (3 no.) suitable handle (2 no.), complete all as specified and as directed.
Taking down/ refixing aluminium doors of any size including necessary repairs works if requires to aluminium section ,floor spring, door closer,door lock complete all as specified.if hardware item is not repairable the same shall be replaced with new and payment shall be made under respective items, complete all as specified and as directed.
S&F double action floor spring hydraulically regulated made up of min 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made up of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and as directed.
S&F Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed, complete all as specified and as directed.
S&F in repair Mortice lock, 2 lever vertical type,size 100 mm for Aluminium Door etc complete all as specified and directed.
S&F in repair stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples,complete all as specified and as directed.
S&F in repair 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n,exc 0.50 Sqm in each pane,complete all as specified and as directed.
Taking down shutter of any description n. exc 1sqm each and refixing in same position including resecuring or easing and adjusting complete all as specified.
Taking down shutter of any description exc 1sqn but n. exc 2sqm each and refixing in same position including resecuring or easing and adjusting complete all as specified.
S&F in repair MS medium weight 100mm butt hinges, complete all as specified and as directed.
S/F in repair of aluminium anodized,tower bolt 200 mm long,complete all as specified and as directed.
S & F in repair for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balanceing white lamination fixed for cupboard and shelving, complete all as specified and as directed.
P .BANERJEE AND CO
M/S Subhadip Enterprise
M/S ASHA ENTERPRISE
LALAN SHARMA
DANATION CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .