Providing Ceiling Fan and Fan Point in Kitchen in 208 nos. of residential flats of Type IV-D quarters of Jayantiya and Parasnath Buildings in Anushaktinagar, Mumbai- 400094

Amount

Point Wiring Work : Providing Ceiling Fan Point with 1.1 kv grade, FRLS PVC insulated multi stranded flexible copper conductor wires (1.5 sq.mm for Phase & 2.5 sq.mm for Earth) in existing concealed conduit with 1-module, 10A, SP controlling switch & 2 module Capacitor type step fan regulator ( suitable / tuned for BLDC ceiling fan of item no.-2 to achieve linear type of speed control) in 3 Modular fabricated 16 SWG MS CRCA sheet powder coated surface type switch box with cover plate & frame, 3-plate ceiling rose with PVC Round Plate to cover existing junction box, terminal looping connector blocks, ferrule numbers on both sides of wires, labelling etc. all as per site conditions, specifications and as instructed by Engineer-in-charge. Note: 1.) Phase & Earth wires for the fan point shall be tapped from the existing concealed switchboard in the kitchen as shown in the drawing. Neutral wire shall be tapped from existing Junction box on which ceiling rose is to be mounted as shown in the drawing. 2.) Tapping from existing concealed switchboard shall be done using PVC flexible conduit including cutting & chiseling in wall for concealement of conduit, filling the leftover gaps with cement, mortar , finishing by applying white cement & necessary touch up painting , if required, etc. as per site conditions. 3.) All switches, fan regulators, cover plates & frame etc. shall be of White color & shall be similar to Athena Classic model of M/s Crabtree / Havells make and other accessories like ceiling roses shall be of polycarbonate body and shall preferably be ISI marked. 4.) The dimensions of switches and fan regulators shall preferably be ISI mark. 5.) All metalic boxes/switch boxes shall be earthed with 1.1 kV grade FRLS PVC insulated 2.5sq.mm copper flexible wire. 6.) The surface switch boxes shall be got manufactured by OEM of wiring accessories and the sample of the same shall be got approved by Dept. 7.) The existing concealed conduit contains wires & thus accordingly pulling & repulling is to be considered while quoating.

Ceiling fan: Supply, installation, testing and commissioning of 900 mm sweep BLDC ceiling fan confirming to IS 374 with BEE certification and regulator controlled speed regulation having aluminium blades complete with 18 SWG safety chain including interconnection with fan point (ceiling rose type) using 3C X 1.0 sq.mm FRLS multistranded flexible copper conductor chord & termination with suitable tinned copper lugs etc. all as per technical specifications in technical bid and as instructed by the Engineer-in-charge.

Fan Hook: Fabrication, supply & installation of ceiling fan hook of MS ‘T’ section of approx. size 65 x 60 x 5 mm & approx. 100 mm long, painted with two coats of synthetic enamel paint over one coat of red oxide paint including drilling holes in corners and in center of webs, fixing it by four nos. of anchor fastener of size min 8 mm x 50 mm including providing ‘S’ hook made up of 8 mm dia. (approx.) SS rod for suspension of ceiling fan, all as required and instructed by the Engineer-in-charge.

HITECH CONSTRUCTION GROUP

JAMES ELECTRICALS PRIVATE LIMITED

New Electricals

ELITE ELECTRICALS AND GROUP OF ENGINEERING SERVICES

Dhoon Glocal Private Limited

PRANIT PROCONCO

M S VISHAL CONTRACT WORKS

Aswathi Power Controls