Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.9 LAccepted-AOC | L1 | Accepted-AOC Lowest rate quoted | |
| 2 | L2₹26.2 L+₹2.2 L (9.24%)Rejected-AOC | L2 | Rejected-AOC Higher rate quoted than L1 | |
| 3 | L3₹30.0 L+₹6.0 L (25.1%)Rejected-AOC | L3 | Rejected-AOC Higher rate quoted than L1 | |
| 4 | L4₹30.2 L+₹6.2 L (26.0%)Rejected-AOC | L4 | Rejected-AOC Higher rate quoted than L1 | |
| 5 | L5₹30.7 L+₹6.7 L (28.0%)Rejected-AOC | L5 | Rejected-AOC Higher rate quoted than L1 |
Tender Value
₹45.0 L
EMD Value
₹90,000
Closing Date
17 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2023_MES_581658_1
8400-924/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹90,000
Yes
24 Mar 2023
17 Feb 2023
18 Mar 2023
17 Feb 2023
17 Mar 2023
3 Mar 2023
Amount
M&L for complete removal of existing treatment on walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of walls and applying two coats of white wash complete all as specified and directed.
M&L for preparation of old decorated surfaces of walls and applying one coat of white wash complete all as specified and directed.
M&L for complete removal of existing treatment on ceiling, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces of wall/pillars/ cornices by vaccum based sanding machine, removal of nails etc & filling cracks/ hole with putty, applying wall care putty up to 1 mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying One coat of oil bound distemper (washable) by auto roller as per existing or as approved tint/colour, complete all as specified and directed by Engineer-in-Charge. (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar). (Note : "If 1mm thick wall care putty shall be required, the same will be measured and paid under Item No. 7.00)
All as per item No 4.00 mentioned here-in-above but on ceiling complete all as specified and directed
M&L for complete removal of existing treatment from old decorated plastered surfaces of wall/pillars/cornices by vaccum based sanding machine, removal of nails etc & filling cracks/hole with putty and including applying wall care putty up to 1 mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of oil bound distemper (washable) over one coat of alkali resistant primer by auto roller as per existing or as approved tint/colour, complete all as specified and as directed by Engineer-in-Charge. (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar). (Note : "If 1mm thick wall care putty shall be required, the same will be measured and paid under Item No. 7.00)
M&L for preparation of old plastered surface of wall and applying wall care putty with approved make complete all as specified and directed.
Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall/pillars/cornices by vaccum based sanding machine, removal of nails etc & filling cracks/hole with putty and applying two coats of cement base paint with using paint brush or roller brush as per existing or as approved tint/colour, complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of old decorated plastered surfaces of wall/pillars/ cornices by vaccum based sanding machine, removal of nails etc & filling cracks/hole with putty and applying one coat of cement base paint by auto roller as per existing or as approved tint/colour, complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of old decorated plastered surfaces of wall/pillars/ cornices by vaccum based sanding machine, removal of nails etc & filling cracks/ hole with putty, applying wall care putty up to 1 mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying One coat of plastic emulsion paint by auto roller as per existing or as approved tint/colour, complete all as specified and directed by Engineer-in-Charge. (Note : If 1mm thick wall care putty shall be required, the same will be measured and paid under Item No. 7.00)
M&L for complete removal of existing treatment from old decorated plastered surfaces of wall/pillars/cornices by vaccum based sanding machine , removal of nails etc & filling cracks/hole with putty and including applying wall care putty up to 1 mm thick whole surfaces (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm by auto roller as per existing or as approved tint/colour, complete all as specified and as directed by Engineer-in-Charge. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).
M&L for preparation of old painted surface of wood and wood based surfaces by knotting, stopping etc of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted steel and iron surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted surface of concrete or bick or stone surfaces etc of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for one coat of aluminium paint over old painted steel surfaces of any description exceeding 10cm width or girth including necessary preparation of old treated (painted) surfaces complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar incl aii quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles and removing rubbishes off from the premises complete all as specified and directed.
M&L for fly ash brickwork with modular fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed
M&L for fly ash brickwork with modular fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed
Demolition of RCC concrete if any description including cutting reinforcement etc. and removing rubbishes off from the premises complete all as specified and directed.
M&L for fair finished flat form work to RCC Chajjas,fins,facia parapets, staircase, landing and similar items including edges for rough finished surface concrete complete all as specified and directed.
M&L for RCC 1:1.5:3 type A-0 (using 12.5mm graded stone aggregates) including RCC Chajjas, fins, facia parapets, staircase, landing etc complete all as specified and directed by Engineer-in-Charge.
M&L for mild steel bars 6mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed
M&L for drip mould 40mm x10mm and similar work not exc 15cm width for RCC Chajja, facia etc in CM (1:4) complete all as specified and directed.
S&F as in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed
S&F as in repair 150/160mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed
S&F 110mm dia PVC (SWR) bends any radius complete all as specified and directed
S&F 150/160mm dia PVC (SWR) bends any radius complete all as specified and directed
Demoltion of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing rubbishes off from the premises complete all as specified and directed
M&L for 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed
Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing rubbishes off from the premises complete all as specified and directed.
M&L for 15mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement on walls complete all as specified and directed
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra cement (including as in patches also) complete all as specified and directed.
M&L for rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement etc complete all as specified and directed
M&L for new plastered surfaces of wall/pillars/cornices by vacuum based sanding machine , removal of nails etc & filling cracks/hole with putty and including applying wall care putty up to 1 mm thick whole surfaces (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm by auto roller as per existing or as approved tint/colour, complete all as specified and as directed by Engineer-in-Charge. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).
M&L for three coat of white wash over newly plastered surface of ceiling complete all as specified and directed.
M&L for new plastered surfaces of wall/pillars/cornices by vaccum based sanding machine, removal of nails etc & filling cracks/hole with putty and including applying wall care putty upto 1 mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of oil bound distemper (washable) over one coat of alkali resistant primer by auto roller as per existing or as approved tint/colour, complete all as specified and as directed by Engineer-in-Charge. (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar). (Note : "If 1mm thick wall care putty shall be required, the same will be measured and paid under Item No. 7.00)
M/S TILKU ENTERPRISE
RUBY BUILDERS AND CONSTRUCTION CO
CLASSIC CONSTRUCTION AND SUPPLIERS
MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .