AS PER TENDER NOTICE LOT 1

Amount

Dry earth work in foundation of Masonary work on channels of discharge above 10 Cumecs including lead upto 30M. and lift upto 1.5 M and its disposal and back filling.

Earth work by Power Transport for a lead of upto 1 km including Excavation, Loading, Unloading, Royalty, manual compaction and dressing including all lift Rates shall be applicable for lead beyond 630 m and upto 1km.

Dewatering with 5 HP Pump including all T&P and for proper complition of work.

Earth work in excavation (Sand filling and making Bandha with local sand/earth) including lead upto 30 m & Lift upto 1.5 m, excluding mechanical compaction but including manual compaction and dressing to profile.

Centering and shuttering for RCC. Work including rent of shuttering, material, labour and T&P required for proper completion of work for slab, and wall etc.

PCC work using M10 grade concrete with stone ballast including cost of material, labour and T&P and also excluding centering, shuttering and reinforcement.

RCC work using M25 grade concrete with stone ballast including cost of material, labour and T&P and also excluding centering, shuttering and reinforcement.

RCC work using M35 grade concrete with stone ballast including cost of material, labour and T&P and also excluding centering, shuttering and reinforcement.

Reinforcement work in plain work such as reinforced cement concrete (when not included on over all rate) wrought to required shape as necessary including bending for proper completion of work, supply of steel, all labour etc. required and including wastage bend, hooks and authorized overlapping shall be measured.

Providing and fixinng 100 mm dia CPVC/PVC drain spout for Weep holes including fasteners and all T&P for Proper completion of work.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

Providing, laying and spreading 7.50 cm compacted layer of WBM grade - 2 with 45-63 mm size shankargarh stone ballast @ 0.97cum/10sqm in uniform thickness, hand packing, rolling with road roller of 80-100 kN. in stages to proper grade & camber, applying & brooming Screening material type- B @0.21cum/10sqm to fill up the interstices of coarse aggregate, watering and compacting including cost of all material, cartage up to site, water, labour T&P etc. complete as directed of E/I.

Providing, laying and spreading 7.50cm compacted layer of WBM grade -3 with 22.40-53 mm size Kabrai stone [email protected]/10sqm in uniform thickness, hand packing, rolling with road roller of 80-100 kN. in stages to proper grade & camber, applying & brooming Screening material type-B @0.19cum/10sqm to fill up the interstices of coarse aggregate, watering and compacting including cost of all material, cartage up to site, water, labour T&P etc. complete as directed of E/I.

Providing and laying Primer coat with Bitumen emulsion (RS-1) on prepared surface of granular base including cleaning of road surface and spraying primer @ 0.70 kg/sq.m. using manual means as per Technical specifications.

Providing and applying tack coat withVG-10 Grade using pressure distributor @ 0.35 kg. / Sqm on the prepared granular surface treated with premier and cleaned with mechanical broom as directed of E / I .

Providing, laying and rolling of open graded premix carpet of 20 mm thickness composed of 2 parts of 13.20 mm nominal size stone grit @ 0.18 cum / 10Sqm and 11.20 mm nominal size stone grit @ 0.09 cum / 10Sqm using VG-10 grade bitumen to required line, grade and level to serve as wearing coarse on a previously prepared base, including mixing in a suitable mixol unit, laying and rolling with 3 wheal 80-100 kN. Static road roller, finished to required level and grades including cost of bitumen emulsion as per direction of Engineer-in-charge.

Providing and laying seal coat type -A over premix carpeted surface with 6.70 mm nominal size stone grit @ 0.09 cum / 10 Sqm with VG-10 bitumen sealing the voids in a bituminous surface laid to the specified levels, grade as per Technical specifications.

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the plasterd wall surface to prepare the surface even and smooth complete including supply of all materials, labour and T&P etc. required for proper completion of work.

Finishing walls with Premium Acrylic smooth Exterior Paint with Silicone additives of require shade 13.47.1 new work (two or more coat applied @ 1.43ltr/10sqm over and including priming coat of exterior primer applied @2.20kg /10sqm)

Painting Footpath with fluorecent enamel paint of approved brand and manufacture of required colour (Black and White Strips) to give an even shadewith Two or more coats on footpath including supply of all materials labour and tools and plants etc. required for proper completion of work.

Dry earth work in foundation Concrete work including lead upto 30.00 M. , lift upto 1.50 M. and back filling as required.

Concrete work for C.C. 1:1.5:3 with Cement ,coarse sand stone grit nominal size in foundation including cost of all material , labour , T&P etc required for proper completion of work.

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick courrugated sheet metal beam rail ,70 cm above road /ground level,fixed on ISMC series channel vertical post ,150x75x5 mm spaced 2 m centre to center,1.80m high ,1.10 m below ground / road level all steel parts and fitments to be galvanised by hot dip process, all fittings to confirm to IS: 1367 and IS: 1364,metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5mm,330mm long complete as per clause 810

Providing and laying of a stripseal expansion joint catering to maxmium horizontel movement upto 70 mm, complete as per approved drawing and standered specifications to be installed by the manufacturer / supplier.

Earth work in filling ruts &cuts for making sub grade for lining including lead up to 30m. & lift up to 1.50m. Including labour, T&P and dressing to profiles etc. required for proper completion of work.

Class M-150 Brick Work for making Toe Wall & sleeper with mortar of 1:4 cement & coarse sand etc. required for proper completion of work.

Laying double flat C.C. Tile of size 50x150x300mm lining with 1:3 cement mortar over 10 to 15 mm. thick mortar of 1:4 cement & coarse sand including 15 mm. thick sand-witched plaster with all lead, all material, labour, T&P etc. required for proper completion of work.

Supplying & laying coarse sand as filter material in porous window of lining panels.

Supplying & laying stone grit as filter material in porous window of lining panel.

Supplying & filling bitumen in joints of lining panel with all material, labour, T&P etc. required for proper completion of work.

Supplying & filling local / canal sand as filter material under lining panel with all lead lift, material, labour, T&P etc. required for proper completion of work.

Providing and fixing of Elestomeric Bearing

M/S UNITE ENTERPRISES