Improved access to water supply at Jallupur Khera Block Rayya District Amritsar under PRWSSIP sub Component 2a i JJM

Amount

Cost of Replacement of Machinery Providing & Installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed Make capable of delivering 404 LPM against a head of 69 mtr (reputed make) complete in all respects as per standard Specifications.

Cost of Replacement of Control Panel consisting of electric appliances such as automatic Star Delta Push Button or oil immersed Starter, Main Switch, VM, Ampere Meter, ELCB, Shunt Capacitor, Single Phase preventer, Indicating Lamps, Kit-Kat etc. (reputed make) complete in all respects as per standard Specifications.

Repair of Pump Chamber

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. (Grills in windows, Grills in ventilator, R.S. Joint on roof, Door, Ventilator,Windows .etc)

White washing 3 coats inside of pump chamber.

Finishing walls with cement based water soluble exterior paint such as snowecem, robbiacem etc. on old work one coat to give an even shade.

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area

RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

Wiring fan point (Without fan box)

Wiring light point

Wiring 6Amp. Plug control comprising wall socket point

Wiring 16/20Amp. power plug control point

Providing and fixing of ceiling fan of reputed make such as Crompton or equivalent

Providing and fixing of electric tube set of reputed make

Repair of OHSR

Plinth protection for OHSR of 100000 Ltrs. Capacity outer dia of Toe wall 7.60 Mtr. with Toe wall & earth filling complete in all respect.

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

Cement concrete 1:8:16 With stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

12.5 mm thick cement plaster 1:4

Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres

Stone (building or pitching) Sand, Earth, Fly Ash, Bajri, Shingle, Spalls, Brick bats, Brick ballast and Stone metal.

Cement concrete 1:8:16 With stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type

Conglomerate floor 40mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Finishing wall with cement based water soluble exterior paint such as snowcem robbiacem etc. on new work in two coats to give even shade.

Repair of 4" Expansion joint Complete in all respects.

Repair of 6" Expansion joint Complete in all respects.

Repair of Development of water works

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing.

Providing & Fixing D hook complete with MS bolt size 300 mm x18 mm as per standard drawing D-7 & Analysis of Rates A-9 complete in all respects.

Providing & Fixing PCC Fencing Poles With 6' height, 3" x 3" Top & 4" x 3" Base provided with 3 nos. hooks complete in all respects

Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing D-3.

Construction of foot paths with masonry toe wall& earth filling & concrete topping; inside water works as per standard drawing D-10 & Analysis of Rates A-11 complete in all respects.

Providing & Installing Testing & Commissioning of One No. Electrically driven diaphragm opreated metering system chemical dosing chlorinator suitable for for delivering 0.5 to 6 liters of Bleaching Powder solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 Kg/cm2 and suction left not less than 1.5 mtr., as per DWSS standard specifations.

Minor Repair & replacement of pipe associated with repair complete in all respects (90 mm pvc pipe)

Supplying, fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects.

Providing and fixing in position CI Bib Cock (tap) (15mm i/d) as per IS:210 with stainless steel spindle of approved make and fixing of nozzle to control flow of water (to the approval of Engineer-in-charge Complete in all respects. (CSR No. 30.65b(i)+NS

Providing proposed water connection to house hold up to wall with providing, laying jointing testing MDPE pipe lines 15 mm i/d with specials 2.00 mtr (Below GL) and ISI Marked G.I. pipe 15 mm i/d GM ferrule (As per IS:1239) B Class approved make 2.50 mtr. (Above GL) including cost of special such as tees, bends, sockets, elbow, etc. cutting, threading and testing in trenches in the ground and ISI marked 15 mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with C.I bib cock, 15 mm i/d as per IS: 210 with stainless steel spindle of approved make as per CSR 30.65 (b) complete in all respects. (Connection at Existing pipe line)

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications

PVC pipe 110mm o/d

PVC pipe 90mm o/d

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge) CSR No. 28.27A

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department CSR No. 28.66

Size 0.9m x 0.9m

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.

Providing proposed water connection to house hold up to wall with providing, laying jointing testing MDPE pipe lines 15 mm i/d with specials 2.00 mtr (Below GL) and ISI Marked G.I. pipe 15 mm i/d GM ferrule (As per IS:1239) B Class approved make2.50 mtr. (Above GL) including cost of special such as tees, bends, sockets, elbow, etc. cutting, threading and testing in trenches in the ground and ISI marked 15 mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with C.I bib cock, 15 mm i/d as per IS: 210 with stainless steel spindle of approved make as per CSR 30.65 (b) complete in all respects. (Connection at New pvc pipe line)

MS Sign board painting & printing complete as per standard size of DWSS complete in all respects

Extra Carriage of Sand (Fine Aggregate)

Extra Carriage of Bajri (Course Agrregate)