CONSTRUCTION OF BKA AND GTDE TEST BED INSIDE SUKHOI ENGINE DIVISION KORAPUT

HINDUSTAN AERONAUTICS LIMITED KORAPUT DIVISION CENTRAL CONTRACT CELL

Name of the Work CONSTRUCTION OF BKA AND GTDE TEST BED INSIDE SED,KORAPUT

Line No KPTCC/W/422

Name of the Contractor

Check list and acceptance for submission of documents with tender

Sl No. Documents Checking by Contractor

1 Constitution and Legal Status of Bidder Firm Registration, Power of attorney of signatory of Bid

2 Submission of cost of Tender documents by way of DD/BC drawn in favour of HAL, Engine Division, Koraput, payable at SBI, Sunabeda (Scanned image of the same in jpg format only to be uploaded) Value

3 Submission of EMD Amount by way of DD/BC drawn in favour of HAL, Engine Division, Koraput, payable at SBI, Sunabeda (Scanned image of the same in jpg format only to be uploaded) Value

4 Submission of Banker’s Solvency certificate for an amount as mentioned in tender issued by any nationalized bank issued within a period of 12 months from the final date of submission of tender Value

5 Submission of Work order copies for having executed similar works in Govt./ Railways/PSUs/Reputed firms

6 Submission of Performance / Completion certificates from Govt./Railways/PSUs/Reputed Private Firms (supported with TDS certificate if from Reputed Private firms) in the last 7 years. For one works value

For Two works value

For Three works value

7 Submission of Contractor’s Registration Certificate with Govt./Quasi Govt./PSUs /Reputed Company

8 Submission of Income Tax Return for last 3 financial years. 2021-22

9 Submission of Average Annual financial turnover during the last 5 years 2019-20

10 Balance sheet for the last 5 years

11 Plant and Machinery details of work

12 Proposed work completion Schedule in the form of Bar Chart

13 Work in Hand in the required format

14 Bank Balance Statement for the last three months

15 Overdraft facilities available with the agencies

16 Submission of Copy of PF Registration PF No.

17 Submission of Copy of Labour License

18 Submission of Copy of PAN Card PAN No.

19 Acceptance of “General Condition of Contract and Instruction to tenderers” and “Notice Inviting Tender” along

20 NEFT/RTGS Format Duly filled in (Original to be submitted in the office)

21 GST REGISTRATION NO: GST No.

22 Submission of Copy of ESI Registration ESI No.

HINDUSTAN AERONAUTICS LIMITED

KORAPUT DIVISION

CENTRAL CONTRACT CELL

BILL OF QUANTITIES FOR THE WORK OF "CONSTRUCTION OF BKA AND GTDE TEST BED INSIDE SED,KORAPUT"

LINE NO : KPTCC/W/422

NAME OF THE AGENCY :

Sl. No. Description of work Quantity Unit Rate Amount

1 Earth work in surface excavation for all kind of soil not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m etc. all complete as per specification and directed of Engineer in Charge 600.00 Sqm ₹ 109.12 ₹ 65,472.00

2 Earth work in excavation for all kind of soil by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. etc. all complete as per specification and direction of Engineer In Charge. 944.92 Cum ₹ 218.74 ₹ 206,691.80

3 Labour charges for Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. In layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and for all lift etc. all complete as per specification and direction of Engineer In Charge. 654.44 Cum ₹ 164.71 ₹ 107,792.81

4 Carriage/removing of excavated Earth not exceeding 1.00 k.m. by mechanical transport including loading, unloading and stacking where directed etc. all complete as per specification and direction of Engineer In Charge. 335.48 Cum ₹ 182.82 ₹ 61,332.45

5 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing etc. all complete as per direction and specification of Engineer In Charge. 120.47 Cum ₹ 1,784.66 ₹ 214,997.99

6 Providing and laying in position cement concrete of 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size ) excluding the cost of centering and shuttering - All work up to plinth level etc. all complete as per specification and direction of Engineer In Charge. 179.53 Cum ₹ 5,724.37 ₹ 1,027,696.15

REINFORCED CEMENT CONCRETE

7 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for Concrete of M25 grade with minimum cement content of 330 kg /cum. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.

a All works upto plinth level 301.34 Cum ₹ 7,987.18 ₹ 2,406,856.82

b All works above plinth level upto floor V level 243.34 Cum ₹ 8,286.05 ₹ 2,016,327.41

Centering and shuttering

8 Centering and shuttering including strutting, propping etc. and removal of form for the same etc. all complete as per direction of Engineer in charge.

a Foundations, footings, bases of columns, etc. for mass concrete 696.81 Sqm ₹ 329.54 ₹ 229,626.77

b Suspended floors, roofs, landings, balconies and access platform 151.97 Sqm ₹ 779.20 ₹ 118,415.02

c Lintels, beams, plinth beams, girders, bressumers and cantilevers 378.30 Sqm ₹ 618.82 ₹ 234,099.61

d Columns, Pillars, Piers, Abutments, Posts and Struts 281.60 Sqm ₹ 807.82 ₹ 227,482.11

9 Supplying carrying to site all approved materials and placing in all positions steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more for R.C.C. work including straightening, cutting,bending, placing in position and binding etc. all complete as per specification and direction of Engineer In Charge. 70808.40 Kg ₹ 90.63 ₹ 6,417,365.29

10 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of 1.25mm thickness for rolling shutters with 80x1.25 mm M.S. laths including providing mechanical device chain and crank operation for operating rolling shutters exceeding 10.00 Sqm and upto 16.80 sqm in area .etc. all complete as per specification and direction of Engineer In Charge. 40.00 Sqm ₹ 4,146.68 ₹ 165,867.20

11 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws (Glazing, paneling and dash fasteners to be paid for separately) for fixed portion etc. all complete as per direction and specification of Engineer In Charge.

a for fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) 270.00 Kg ₹ 446.13 ₹ 120,455.10

b For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with minimum thickness of powder coating 50 micron etc. all complete as per direction and specification of Engineer In Charge. 366.75 Kg ₹ 533.15 ₹ 195,532.76

12 Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. all complete as per direction and specification of Engineer In Charge. 2.00 Each ₹ 444.41 ₹ 888.82

13 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. all complete as per specification and direction of Engineer In Charge. Make:-Godrej, hettich, harrision, Droma, hafele, Dorset, Gezze. 6.00 Each ₹ 826.18 ₹ 4,957.08

14 Providing and fixing Powder coated minimum thickness 50 micron aluminium round shape handle of outer dia 100 mm with SS screws etc. all complete as per direction of Engineer in charge. 12 Each ₹ 91.85 ₹ 1,102.20

15 Providing and fixing 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm) float glass panes for panelled or panelled and glazing shutters for doors, windows and clerestory windows etc. all complete as per specification and direction of Engineer In Charge. 53.28 Sqm ₹ 2,185.25 ₹ 116,430.12

16 Brick work with clay flyash F.P.S. (non modular) brick of class designation 5 in Cement mortar 1:4 (1 cement : 4 coarse sand) superstructure above plinth level up to floor five level etc. all complete as per specification and direction of Engineer In Charge. 151.15 Cum ₹ 5,228.82 ₹ 790,336.14

17 Plastering with 15 mm cement plaster on the rough side of single or half brick wall or concrete surface of mix in cement mortar 1:4 (1 cement: 4 fine sand). The work includes erection of necessary scaffolding including rendering, floating, drip course, border in chajja finishing the surface even and neat curing etc. all complete as per specification and direction of Engineer In Charge. 1670.20 Sqm ₹ 335.67 ₹ 560,636.03

18 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade over new work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) with preparation of surfaace etc. all complete as per specification and direction of Engineer In Charge. 638.10 Sqm ₹ 143.78 ₹ 91,746.02

19 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre over new work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour etc. all complete as per specification and direction of Engineer In Charge. 1137.14 Sqm ₹ 156.01 ₹ 177,405.21

20 Providing and fabricating structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete as per specification and direction of Engineer In Charge. 34237.23 Kg ₹ 112.35 ₹ 3,846,552.79

21 Painting with high gloss synthetic enamel paint with two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture of required colour to give an even shade with preparation of surface etc. all complete as per specification and direction of Engineer In Charge. 1335.13 Sqm ₹ 190.13 ₹ 253,848.27

22 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer, fixed to openings /wooden frames with rawl plugs screws etc. all complete as per specification and direction of Engineer In Charge. 972.00 Kg ₹ 200.29 ₹ 194,681.88

23 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. all complete as per specification and direction of Engineer In Charge. 657.00 Sqm ₹ 620.71 ₹ 407,806.47

24 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as 2 mm thick corrugated (2.5” or 4.2” or 6”) or step-down (2” or 3” or 6” ) as specified etc. all complete as per direction of Engineer in charge. 40.50 Sqm ₹ 1,177.61 ₹ 47,693.21

25 Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws etc. all complete as per direction of Engineer in charge.

b Barge board (Upto 300 mm) 30.00 Rmt ₹ 379.41 ₹ 11,382.30

c Crimp curve 67.50 Sqm ₹ 417.44 ₹ 28,177.20

26 Providing fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building etc. all complete as per direction of Engineer in charge. 562.50 Sqm ₹ 590.79 ₹ 332,319.38

27 Supplying, carrying to site all approved materials providing and fixing brass 150mm floor door stopper weight not less than 0.357kg fixed to the shutteretc. all complete as per specification and direction of Engineer In Charge. 4 Each ₹ 240.61 ₹ 962.44

28 Supplying, carrying to site all approved materials providing & fixing Aluminium anodized barrel tower bolt extruded section 200 mm length & The material shall be confirming to latest IS etc. all complete as per specification and direction of Engineer In Charge. 4 Each ₹ 79.20 ₹ 316.80

29 Supplying , providing all approved materials and fixing in position butt hinges, aluminum alloy anodized & fixed of size 125 mmx63x4mmThe material should be confirming to latest IS etc. all complete as per specification and direction of Engineer In Charge. 12 Each ₹ 81.01 ₹ 972.12

30 Supplying , providing all approved materials and fixing handles aluminum alloy anodized & fixed of size 125 mm.with plate 175x32mm.The material should be confirming to latest IS etc. all complete as per specification and direction of Engineer In Charge. 8 Each ₹ 71.45 ₹ 571.60

31 ACOUSTIC WORKS: Acoustic Insulation on wall surface. Supply, fabrication and fix Acoustic insulation to wall with GI HAT section frame made out of 22 SWG , GI sheet and fixed to the wall anchor fasteners at every 300mm centres (in both the directions), providing fibre glass wool 100 mm thickness having density of 64 kg/cum wrapped with fibre glass cloth, covered with GI hexagonal mesh over the fibre glass, covering the panels with 20 SWG GI color coated perforated sheets fixed to the frame with SS screws at 150 mm C/C. Covering the joints with aluminum beading of size 20mm x 3mm over perforated sheet at an interval of 600 x 1200, to the frame work at every 150 mm with aluminum pop up rivets of approved size etc. all complete as per drawing, specification and direction of Engineer In Charge. 214.54 Sqm ₹ 7,741.00 ₹ 1,660,754.14

32 Acoustic Insulation to Ceiling: Supply, fabricate and fix Acoustic insulation to ceiling with acoustic panels of size 1m x1m with following specifications: Supplying, providing and fixing 75 x 75 x 6 mm MS angle cleat of 100mm long, shall be welded to the base plate/ insert plate/ with anchor fasteners, 2nos of 75 x 75 x 6 mm angles which are 50mm stich welded back to back at every 150 mm interval is welded to the cleat angle to the other side. In between 75 x 75 x 6 mm MS angle formation, acoustical panel shall be placed. The acoustic panel box is made of GI sheets formed with following details and joined by aluminum pop up rivets of approved size at 50mm regular intervals. 73.20 Sqm ₹ 12,000.00 ₹ 878,400.00

The acoustical panel box shall be made with 0.8 mm GI plain sheet frame C-channel at sides and 1.5mm GI perforated ivory color painted (one coat synthetic enamel painted over one coat zinc chromate primer, both primer and paint on either sides) facing on the external side and 0.5 mm GI plain sheet at rear side, with 64 Kg/Cum, 100 mm thick mineral wool as acoustic infill covered with GI hexagonal mesh and wrapped / packed in glass cloth as pockets having the size of 1000 x 1000 mm with sufficient lapping for stiching continuosly leaving no gap, and placed and secured in the structural frame work etc. all complete as per drawing, specification and direction of Engineer In Charge.

33 Providing and fixing 450mm inished floor height (FFH) removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of:

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug. (b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge 38.71 Sqm ₹ 5,022.98 ₹ 194,439.56

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality of the product.

34 Providing and fixing mild steel round holding down bolts with nuts and washer plates etc. all complete as per specification and direction of Engineer In Charge. 168.00 Kg ₹ 81.68 ₹ 13,722.24

35 Providing and fixing bolts including nuts and washers etc. all complete as per specification and direction of Engineer In Charge. 50.40 Kg ₹ 133.91 ₹ 6,749.06

36 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth etc. all complete as per specification and direction of Engineer In Charge. 97.00 Sqm ₹ 629.66 ₹ 61,077.02

37 Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to be paid for separately) etc. all complete as per specification and direction of Engineer In Charge. 56.18 Rmt ₹ 1,436.34 ₹ 80,693.58

38 Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/sqm) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 60 minutes of fire resistance both integrity & radiation control (EW60) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm etc. all complete as per specification and direction of Engineer In Charge. 22.45 Sqm ₹ 33,954.24 ₹ 762,272.69

39 Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture tetc. all complete as per specification and direction of Engineer In Charge. 16.00 Each ₹ 7,030.38 ₹ 112,486.08

WATER SUPPLY, PLUMBING & SANITARY APPLIANCES

40 Providing and fixing follwing dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

a 25mm nominal outer diameter of pipes 10.00 Rmt ₹ 337.44 ₹ 3,374.40

b 50mm nominal outer diameter of pipes 10.00 Rmt ₹ 785.00 ₹ 7,850.00

41 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes for 25 mm nominal dia. having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints for concealed work, including cutting chases and making good the walls etc complete as per direction of Engineer in Charge. 20.00 Rmt ₹ 527.10 ₹ 10,542.00

42 Providing and fixing following nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) etc. all complete as per specification and direction of Engineer In Charge.

a 25mm nominal bore 3.00 Each ₹ 523.03 ₹ 1,569.09

b 50mm nominal bore 1.00 Each ₹ 862.73 ₹ 862.73

43 Providing and fixing on wall face unplasticised Rigid PVC rain water Single socketed pipes for 75mm bore dia. conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all complete as per direction of Engineer in charge. 30.00 Rmt ₹ 209.08 ₹ 6,272.40

44 Providing and fixing on wall face unplasticised - PVC moulded Single tee without door for unplasticised Rigid PVC rain water pipes for 75x75x75 mm bore dia. conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all complete as per direction of Engineer in charge. 4.00 Each ₹ 121.26 ₹ 485.04

45 Providing and fixing on wall face unplasticised - 75mm bore PVC moulded bend 87.5° for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc. all complete as per direction of Engineer in charge. 2 Each ₹ 88.12 ₹ 176.24

46 Demolishing cement concrete nominal concrete 1:4:8 or richer mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead etc. all complete as per specification and direction of Engineer In Charge. 1.60 Cum ₹ 1,263.53 ₹ 2,021.65

47 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete etc. all complete as per specification and direction of Engineer In Charge. 10125.00 Kg ₹ 103.87 ₹ 1,051,683.75

48 Supplying and installation of tested fully glazed fire rated fixed partition with 120 minutes of integrity and radiation control (EV-120) with symmetrical (Bi-Directional) fire protection. The frames shall be cold rolled profiles using Dx52D+Z275-M-A-O steel sheets (as per standard EN 10327). The frames are cold rolled from 1.5mm steel sheet to form a profile of 50x50mm on all sides. The system shall be tested as per EN 1364-1 in an international accredited laboratory. The glass should be 20mm clear 120min- bi –direction fire rated for integrity, radiation control (EW 120) and made in India partially insulation (EI 20) Non wired toughen interlayered glass with a light transmission of 86% and a sound reduction of 38 db and manufactured in UL & TVU audited facility and including UL-EU certification and compliant to class 1(B) 1 category of impact resistance as per EN 12600.The glass shall be tested for 5000 hours of UV resistance as per UN ISO 12543-4. The glass shall be EPD (Environmental Production Declaration) verified in accordance to EN 15804 and ISO 14025 in which its life cycles assessment is performed considering cradle to gate system boundaries. The glass must produce a recycled content declaration committing to a pre-consumer cullet of up to 11% and post-consumer cullet less than 1%. The glass shall provide bi-directional(Symmetrical) protection & ISI marked base glass from India. 3.36 Sqm ₹ 68,950.00 ₹ 231,672.00

The glass should be held in its place with the help off 1.5 mm cold rolled steel beading and keraleix 2000 ceramic tape with cross section 4x15 mm as per the test evidence. Beading shall be clipped on using stainless steel self-tapping screws fixed at a distance of 70mm from the edges and 150 mm c/c henceforth. The glass panes are to be supported on non-combustible 6mm calcium silicate setting blocks. The maximum glazing size shall be as per the test certification. The profile has to be fixed to the supporting construction by means of M10 or bigger steel bolts at every 150mm from the edges and every 500 mm approx. c/c. The partition shall offer C4 level of wind resistance when tested as per EN12211 and shall provide class 4 level of air permeability as per EN 1026. The partitions shall also be tested for class 5 of impact resistance when tested as per 13049. The partitions shall also be tested for class 4 level of mechanical strength when tested as per EN 13115. The partitions shall have water tightness level of 8A when tested as per EN 1027 c/c as per the direction of Engineer in charge. Make:- Saint-Gobain, Jensen, Forster, Vetrotech.

49 Providing and installation 24mm clear toughen DGU glass. The glass should be 6mm clear toughen DGU 6-12-6 inter pane 6mm clear toughen 12mm air gap and 6 mm clear toughen with 1.5 cold role section. The frame shall be cold rolled profiles using Dx52D+Z275-M-A-O steel sheets as per EN standard EN 10327. The fames are cold rolled from 1.5 mm steel sheet to from a profile 50x50mm on all sides. The system shall be tested as per EN 1364-1 in an international accredited laboratory etc all complete as per direction of Engineer in charge. 3.36 Sqm ₹ 18,500.00 ₹ 62,160.00

50 Providing and fixing fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading etc. all complete as per specification and direction of Engineer In Charge. 10.80 Sqm ₹ 1,512.98 ₹ 16,340.18

51 Hire & running charge for crane upto 40 tonne capacity etc. all complete as per direction of Engineer in charge. 15.00 Day ₹ 8,950.00 ₹ 134,250.00

52 Providing and fixing 12 mm thick prelaminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per specification and directions of Engineer-in-Charge. 17.28 Sqm ₹ 937.31 ₹ 16,196.72

Sub Total Works Amount ₹ 26,010,913.32

I / We hereby quote percentage above (+) or below (-) the Estimated cost 0.00% ₹ 0.00

Sub Total Works Amount ₹ 26,010,913.32

ADD GST @ 18% (( IGST18%) or (CGST @ 9% +SGST@ 9%)), Whichever is applicable ₹ 4,681,964.40

GRAND TOTAL ₹ 30,692,877.72

Note : (i) : It is a percentage rate tender. Hence the tenderers are required to quote rates on percentage basis i.e. above or below the estimated cost put to tender. (ii) The quoted rates in the bill of quantities are inclusive of all types of taxes, duties levies, fees and charges etc., imposed by Central/ State Govt. and local bodies Compensation Cess, Labour Cess, Custom Duty, royalties and other levies. It shall also include all other costs including loading, un-loading, insurance, transportation, testing and Certification expenses except GST . GST at the prevailing percentage is added in the BOQ at the end.

GOODS AND SERVICE TAX (GST)

A Registration, HSN / SAC Code & GST Rate

1 Bidder should indicate GSTIN No. (Copy of GST registration to be enclosed) and PAN No. (copy of PAN to be enclosed).

2 Tender will be considered/ accepted, if & only if the vendor has a valid GST Registration No

3 Central Tax/ State Tax/ Integrated Tax/ Union Territory tax to be quoted as per GST Law

4 Bidders to ensure correct applicability of Central Tax/ State Tax/ Integrated Tax/ Union Territory tax based on the Inter / Intra state movement Supply of goods and provision services or both

5 Bidder shall mention the SAC Code/HSN Code for goods and services in accordance with GST law in their Bid and subsequently in their tax invoice. HAL, Koraput Division shall not be responsible for any error in SAC Code/HSN Code for goods and/or services specified by supplier/contractor

B Invoicing & Payment

6 The Tax Invoice for supply of Goods & Services should be raised as per the provision of GST Act & Rules and must compulsorily mention the following-

a. HAL, Korpaut Division GST registration number as 21AAACH3641R1ZJ

b. Name & address of supplier / Vendor/ Contractors

c. GSTIN of Supplier / vendors / Contractors

d. Consecutive Serial Number & date of issue

e. Description of goods or services

f. Total value of supply

g. Taxable value of supply

h. Tax Rate – Central Tax & State Tax or Integrated Tax, Cess

i. Amount of Tax charged

j. Place of supply

k. Address of delivery if different from place of supply

l. Signature of authorized signatory

7 Reimbursement of GST to the vendor is contingent upon complying with the following condition by the service provider

i. Uploading the (invoices raised on HAL, KoraputDivision ) onward GST Return (GSTR-1) in GSTN Network portal within the statutory time period

ii. Discharging the GST tax liability to the Government.

iii. Submission of Tax Invoice to HAL, Korpaut Division.

iv. Submission of proof of payment of GST to HAL, Korpaut Division.

v. Receipt of goods / services by HAL Koraput Division.

vi. Availment of Input Tax Credit by HAL, Korpaut Division .

C Input Tax Credit

8 In case GST credit is delayed/ denied to HAL, Korpaut Division, due to non/delayed receipt of goods and/or services and/or tax invoice or expiry of timeline prescribed in GST Law for availing such ITC, or any other reason not attributable to HAL, Korpaut Division, GST amount shall be recoverable from Vendor along with interest & penalty levied/ leviable on HAL, Korpaut Division, as the case may be

9 In case vendor delays declaring such invoice in his return and GST credit availed by HAL, Korpaut Division is denied or reversed subsequently as per GST law, GST amount paid by HAL, Korpaut Division towards such ITC reversal as per GST law shall be recoverable from vendor/contractor along with interest & penalty levied/ leviable on HAL, Korpaut Division.

10 In case of discrepancy in the data uploaded by supplier in the GSTN portal or in case of any incomplete work/service, then HAL, Korpaut Division will not be able to avail the tax credit and will notify the supplier of the same. Supplier has to rectify the data discrepancy in the GSTN portal or issue credit note (details to be uploaded in GSTN portal).

11 For any such delay in availing of tax credit for reasons attributable to vendor (as mentioned above), interest as per the GST Act & Rules, along with penalty, if any will be deducted for the delayed period i.e. from the month of receipt till the month tax credit is availed, from the running bills.

D Penalty for Non-compliance of GST Act

12 Penalty amount so determined along with GST if applicable thereon shall be recovered from the contractor.

E Anti-profiteering Measure .

13 Any reduction in rate of Tax on any supply of goods or services or the benefit of input tax credit shall be passed on to the recipient by way of commensurate reduction in prices. Bidders have to submit declaration in their bid that they have complied with ‘Anti-profiteering clause’ under GST law.

The bidder’s quoted rates/ price should be after considering the Input Credit under GST law at their end, since GST on output (GST amount charged in Invoice) will be paid by HAL.

F Other Provision

14 In case any changes in taxes and duties as per Gov. Notification (including GST), the same shall be applicable from time to time.

G Allottment of quarters

15 Quarters will be allotted to the awarded agency subject to availability & recommendation from the E-I-C/ O-I-C for which rents as applicable will be recovered from the running bills of the agency.

LIST OF WORK IN PROGRESS FOR THE WORK CONSTRUCTION OF BKA AND GTDE TEST BED INSIDE SED,KORAPUT

Line No. KPTCC/W/422

NAME OF THE CONTRACTOR

Sl. No. Name of Work Total/W.O Value in Rs. Executed/Completed Value Rs. Balance Rs. Date of Commencement Date of Completion